Im trying to flash either CWM or TWRP viea fastboot, i download the recovery, re name it to recovery ( recovery.img) place it in my C drive folder and then type fastboot flash recovery C:\recovery.img
however each time when entering recovery from the boot screen it ends with a dead android and an exclamation mark, what next?
Are you booting android before booting recovery
It's easier to put the image in the same location as fastboot so you just type
fastboot flash recovery recovery.img
After classifying I've rebooted into android, then powered off and back to recovery, followed by recovery then the dead android.
That should read after flashing, not classifying.
2Pints said:
That should read after flashing, not classifying.
Click to expand...
Click to collapse
Your on 5.0.1? I had the problem too what worked for me and I can't tell you why was to boot into twrp, flash supersu and then boot back into the bootloader and flash twrp
Fastboot boot twrp.img
Flash supersu, then
fastboot flash recovery twrp.img
Sent from my Nexus 5 using XDA Free mobile app
I cant get to the TWRP bit
download twrp rename it to recovery
fastboot flash recovery C:\recovery.img
fastboot reboot
boot into bootloader, select recovery, phone reboots ( google splash screen) then dead android.
2Pints said:
I cant get to the TWRP bit
download twrp rename it to recovery
fastboot flash recovery C:\recovery.img
fastboot reboot
boot into bootloader, select recovery, phone reboots ( google splash screen) then dead android.
Click to expand...
Click to collapse
Try opening a cmd window in the folder with your image and flashing, ( shift+right click) and boot straight into recovery, without restarting...
2Pints said:
I cant get to the TWRP bit
download twrp rename it to recovery
fastboot flash recovery C:\recovery.img
fastboot reboot
boot into bootloader, select recovery, phone reboots ( google splash screen) then dead android.
Click to expand...
Click to collapse
Are you actually reading what we're posting? The post above yours tells you what to do so follow that and it should work
Its because of the install recovery shell script replacing recovery on first boot of android. You'll want to remove those scripts
Basically dont do "fastboot reboot". Just boot from bootloader directly into recovery, then using TWRP file manager, delete the scripts.
/system/recovery.init.boot.p
/system/bin/install-recovery.sh
rootSU said:
Its because of the install recovery shell script replacing recovery on first boot of android. You'll want to remove those scripts
Basically dont do "fastboot reboot". Just boot from bootloader directly into recovery, then using TWRP file manager, delete the scripts.
/system/recovery.init.boot.p
/system/bin/install-recovery.sh
Click to expand...
Click to collapse
Exactly. Gosh, how hard can this be.
People don't read - if they did, they would know.
Android has been using this for a while now, to ensure stock recovery stays there.
a maguro wrote this.
My Le 1s sucked on boot screen. I already installed TWRP on my mobile. Then downloaded stock rom from http://forum.le.com/in/eui_detail.html?euiid=205. and installed using adb sideload. Everything worked fine. But TWRP not working. Then I flashed TWRP image using adb fastboot. After installed, I used "fastboot reboot" command. But it is not worked. Then I rebooted normally.
After rebooting the device, it automatically go to the recovery mode. Same happen when power on the device. In recovery also TWRP not working. Custom recovery also not showing. After few second, it again going to normal boot. It repeated again and again
Can't use any adb comment on system. What should I try now?
Commant Used:
adb reboot bootloader
fastboot oem unlock
Pressed volume up to confirm unlock
fastboot flash recovery twrp.img
fastboot reboot
I have unlocked bootloader.
I enabled adb debugging from developer settings.
1. adb reboot bootloader
2. fastboot flash recovery twrp.img (tried all of those: peter's, from twrp website, from link on lineageos official thread)
Up to this point everything works fine
3A. fastboot reboot then hold PWR+VOL_UP
3B. Hold PWR+VOL_UP
And at this step I am seeing fastboot logo plus "Unlocked" label at bottom (while in regular fastboot I don't see Unlocked label)
My best guess that something went wrong while booting into twrp, and it fallbacks to fastboot. However I have no clue how to check what's wrong, where to check any logs etc.
Any help appreciated
My advice would be to flash recovery again and manually reboot into recovery and not using fastboot reboot
If this doesnt work flash rom again via bootloader....Then flash recovery....Do Not use fastboot reboot....
Manually holding buttons go into recovery
Team Win Recovery Project 3.x, or twrp for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface*
Requirements
1. Unlocked bootloader.
Bugs:-
NO BUGS
Instructions
1. Go to the fastboot mode.
2. Download the*recovery.img*and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
[
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
! TWRP flashed successfully.
6. Now Type Fastboot oem Reboot-recovery now you will reboot in recovery dont be painic it will take 1 min to open the recovery.
Enjoy !
Downloads
TWRP RECOVERY
https://drive.google.com/file/d/10aZZlEFUyKSSkBv1edvhFOiMGBQRNTqt/view
XDAevDB Information
TWRP For Realme U1
Contributors @YnaveenK @Who Deepak
Version Information
Status:*Stable
Based on :*TWRP
Works fine on color OS 6
How to enter fastboot mode in realme u1?
my device not entering fastboot mode, maybe fastboot mode not available in my device. how to flash twrp recovery now?
I tried TWRP and CWM. But no luck
What should I do?
Phone model - Huawei Y3 II Lua U22
The commands I used - https://ibb.co/QrbBZSH
P.s - If anyone has CTR, please share it with me.
i reboot recovery with twrp or ctr is normally.
My folder has CTR and TWRP, you flash them and reboot recovery by Hold power+volume up or reboot recovery in fastboot with command:
fastboot boot recovery.img (with recovery is your file name)
https://drive.google.com/drive/folders/1Eb8FH2x6hKiivz04ecO4gCXFQsMXO2tl?usp=sharing