CM12.1 with hboot2.16 can't install via TWRP need older hboot? - HTC One S

Hi there,
hboot 2.16.0000
rooted, unlocked and S-OFF
TWRP 2.8.7.0
CM 12.1 nightly from 29.07.15
Can't install the CM via TWRP, seems like a problem with hboot 2.16, I think CM12.1 is only running up to hboot 2.15.4444 right?
I searched the whole internet, but can't find a hboot 2.15.0 or 2.15.4444 for my "htc one s "ville" (T-Mobile)"
Could anybody help me?
Thanks!!!!

eurix said:
Hi there,
hboot 2.16.0000
rooted, unlocked and S-OFF
TWRP 2.8.7.0
CM 12.1 nightly from 29.07.15
Can't install the CM via TWRP, seems like a problem with hboot 2.16, I think CM12.1 is only running up to hboot 2.15.4444 right?
I searched the whole internet, but can't find a hboot 2.15.0 or 2.15.4444 for my "htc one s "ville" (T-Mobile)"
Could anybody help me?
Thanks!!!!
Click to expand...
Click to collapse
Did you try to flash the correct version for your phone? There are different links provided for the different hboot versions in the CM thread. The file you need is "cm-12.1-20150729-UNOFFICIAL-ville.zip" and not "cm-12.1-20150729-NIGHTLY-ville.zip". Besides you cannot use the update function of CM on hboot 2.16 since it only downloads the official versions for hboot 2.15.

OK, thanks!
I didn't recognize that there are two different CM downloads...
I flashed back to hboot 2.15 and installed cm12.1 nightly with twrp, SUCCESS!!
Installation on hboot2.15 of CM12.1 with CWM isn't working... dont know why...
But hey, Phone is running.. thanks

Related

[Q] Move from MaximusHD 10.0 to CM 11

Hello everyone,
After a few month with the maximus rom i wanted to test out the new Cyanogenmod rom 11 on my htc one s.
But when i try flashing it with the recovery, it fails. I heard, that i have to downgrade something in order to get the new Rom installed. What must I do?
I have been reading a lot of topics without finding a concrete answer.
I am S-ON (No superCID) and I have TWRP 2.4.1 and Hboot 2.16
How can I install CM11 successfully ?
Thx :laugh:
Installing CM 11
kc6992 said:
Hello everyone,
After a few month with the maximus rom i wanted to test out the new Cyanogenmod rom 11 on my htc one s.
But when i try flashing it with the recovery, it fails. I heard, that i have to downgrade something in order to get the new Rom installed. What must I do?
I have been reading a lot of topics without finding a concrete answer.
I am S-ON (No superCID) and I have TWRP 2.4.1 and Hboot 1.16
How can I install CM11 successfully ?
Thx :laugh:
Click to expand...
Click to collapse
Aquire S-Off and SuperCID . This makes things ten times more easier . There are recent thread posts in Android development that show you how .
You will have to actually update your hboot to 2.15 and implement a twrp that supports SElinux.
1 ) http://forum.xda-developers.com/showthread.php?t=2322755
Use that to upgrade your hboot.
2 ) http://flemmard.net/recoveries/openrecovery-twrp-2.6.3.0-ville-selinux.img
Download and flash this recovery.
3 ) http://download.cyanogenmod.org/?device=ville
Get the latest nightly from the get.cm
... and flash away
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
If you need specifics, Let me know.
I've been down your path and I hopefully can help you out on each step.
Happy flashing
S-Off
Thanks for the fast reply.
Is it better to do S Off before superCID ?
To make it s-off which méthode should i use? Facepalm or moonshine?
kc6992 said:
Thanks for the fast reply.
Is it better to do S Off before superCID ?
To make it s-off which méthode should i use? Facepalm or moonshine?
Click to expand...
Click to collapse
S-Off First, Cause that's what enables you to install different RUU's and update/downgrade firmware.
Try Facepalm
.. and for superCID, use one of the toolkit's. that one's a bit easier
kc6992 said:
Hello everyone,
After a few month with the maximus rom i wanted to test out the new Cyanogenmod rom 11 on my htc one s.
But when i try flashing it with the recovery, it fails. I heard, that i have to downgrade something in order to get the new Rom installed. What must I do?
I have been reading a lot of topics without finding a concrete answer.
I am S-ON (No superCID) and I have TWRP 2.4.1 and Hboot 1.16
How can I install CM11 successfully ?
Thx :laugh:
Click to expand...
Click to collapse
You have hboot 2.16 not 1.16. What I suggest is before downgrading, try one of CM11 builds for 2.16. They're compiled by RockR172 for 2.16 and they're based on official builds. Latest available is the one from 20/12 and you'll find it in the second post from the CM11 thread. If you find then CM11 comfortable to use, you could downgrade your hboot to 2.15 and start using the official nightlies.
Sent from nowhere over the air...
Hboot
Rapier said:
You have hboot 2.16 not 1.16. What I suggest is before downgrading, try one of CM11 builds for 2.16. They're compiled by RockR172 for 2.16 and they're based on official builds. Latest available is the one from 20/12 and you'll find it in the second post from the CM11 thread. If you find then CM11 comfortable to use, you could downgrade your hboot to 2.15 and start using the official nightlies.
Sent from nowhere over the air...
Click to expand...
Click to collapse
You right i have hboot 2.16 ...
This unofficial Rom will also work with s-off if i use "Incase you don't have S-OFF, fastboot flash boot boot.img" or won't it?
http://forum.xda-developers.com/showthread.php?t=2528113
For the next step:
How can I downgrade hboot then? must i have to lock and then unlock it again with HTCdev?
Must i be s-off and supercid?
kc6992 said:
You right i have hboot 2.16 ...
This unofficial Rom will also work with s-off if i use "Incase you don't have S-OFF, fastboot flash boot boot.img" or won't it?
http://forum.xda-developers.com/showthread.php?t=2528113
For the next step:
How can I downgrade hboot then? must i have to lock and then unlock it again with HTCdev?
Must i be s-off and supercid?
Click to expand...
Click to collapse
Yes. That was the one I told you about. In the second post, you'll find links to the 2.16 builds. The latest one is THIS. That step for flashing kernel in fastboot is mandatory for anyone that's S-On, for any ROM and for any hboot higher than 1.09. So after you flash that ROM, reboot to fastboot and flash the boot.img (that you have previously extracted from the ROM zip) using that command.
For downgrade, there a couple of threads describing the procedure in the Dev section, there's no need to repeat all this at this point. Fist flash this CM and see if you are OK with it...not to find later that you've downgraded and now you want MaximusHd back. Going from sense based ROMs to non-sense based ROMs was a challenge for many and there are alot of things that differs. That's why I said you might want to check first and only after take such decision
I just compiled a recent CM11 version (0109-nightly) for hboot 2.16. You can download it from
https://drive.google.com/file/d/0B0ajti88ZAFzYkZqNEVydkZwSzg/edit?usp=sharing
if you want. Its compiled from the official CM11 sources where additionally two cherry picks
are necessary to support the new hboot and TWRP recovery
http://review.cyanogenmod.org/#/c/53647/
http://review.cyanogenmod.org/#/c/53559/
Edit: Note that this build is ONLY for HBOOT 2.16 !!!
If you are s-on you still have to extract the kernel (boot.img) from the archive and flash it via fastboot after
flashing the zip. Alternatively you can use the FlashImageGUI app (from play store). In this case flash the boot.img BEFORE
you flash the rom zip. Worked great for me when I was still s-on and you don't need a computer to flash a
new rom.
kc6992 said:
You right i have hboot 2.16 ...
This unofficial Rom will also work with s-off if i use "Incase you don't have S-OFF, fastboot flash boot boot.img" or won't it?
http://forum.xda-developers.com/showthread.php?t=2528113
For the next step:
How can I downgrade hboot then? must i have to lock and then unlock it again with HTCdev?
Must i be s-off and supercid?
Click to expand...
Click to collapse
Hey Bro How Did U managed to install Maximus Hd on S on and without supercid...plzz tell me m tired of this Tmobile Rom.....thankx.
I believe Twistedkat ROM works on hboot 2.16. Check it out in dev forum
http://forum.xda-developers.com/showthread.php?t=2584591&page=37
Nobody?????
Hemantgits said:
Nobody?????
Click to expand...
Click to collapse
What Hboot are you on ?
kc6992 said:
Hello everyone,
After a few month with the maximus rom i wanted to test out the new Cyanogenmod rom 11 on my htc one s.
But when i try flashing it with the recovery, it fails. I heard, that i have to downgrade something in order to get the new Rom installed. What must I do?
I have been reading a lot of topics without finding a concrete answer.
I am S-ON (No superCID) and I have TWRP 2.4.1 and Hboot 1.16
How can I install CM11 successfully ?
Thx :laugh:
Click to expand...
Click to collapse
This thread is very confusing!
Firstly the OP must be S-Off to flash the 2.16 firmware in order to run MaximusHD with the right storage etc, no? Might be confused thinking superCID is S-Off? Also, TWRP version must be 2.6.1.0 not 2.4.1?
drkxyz said:
I just compiled a recent CM11 version (0109-nightly) for hboot 2.16. You can download it from
https://drive.google.com/file/d/0B0ajti88ZAFzYkZqNEVydkZwSzg/edit?usp=sharing
if you want. Its compiled from the official CM11 sources where additionally two cherry picks
are necessary to support the new hboot and TWRP recovery
http://review.cyanogenmod.org/#/c/53647/
http://review.cyanogenmod.org/#/c/53559/
Edit: Note that this build is ONLY for HBOOT 2.16 !!!
If you are s-on you still have to extract the kernel (boot.img) from the archive and flash it via fastboot after
flashing the zip. Alternatively you can use the FlashImageGUI app (from play store). In this case flash the boot.img BEFORE
you flash the rom zip. Worked great for me when I was still s-on and you don't need a computer to flash a
new rom.
Click to expand...
Click to collapse
Did the CM 0109-nightly for 2.16 hboot you compiled flash ok? Are you running it now? I think most of the dev's have had problems getting it to install properly. I don't think you can be S-On and on 2.16 hboot, unless I'm missing something?
fatboyslimerr said:
I believe Twistedkat ROM works on hboot 2.16. Check it out in dev forum
http://forum.xda-developers.com/showthread.php?t=2584591&page=37
Click to expand...
Click to collapse
I tried to flash the latest version of Twistedkat ROM the other night and it wouldn't flash with any recovery that I tried on 2.16 hboot.
rom
rosswhite said:
This thread is very confusing!
Firstly the OP must be S-Off to flash the 2.16 firmware in order to run MaximusHD with the right storage etc, no? Might be confused thinking superCID is S-Off? Also, TWRP version must be 2.6.1.0 not 2.4.1?
Did the CM 0109-nightly for 2.16 hboot you compiled flash ok? Are you running it now? I think most of the dev's have had problems getting it to install properly. I don't think you can be S-On and on 2.16 hboot, unless I'm missing something?
I tried to flash the latest version of Twistedkat ROM the other night and it wouldn't flash with any recovery that I tried on 2.16 hboot.
Click to expand...
Click to collapse
I wasn't confused. I really was S-On with twrp 2.4.1 and it worked well
Now i'am back on hboot 2.15 and i flashed CWM in order to flash CM11.
For maximusHD on hboot 2.16 and S-ON I just followed the tutorial : http://forum.xda-developers.com/showthread.php?t=2445392
I know it may sound confusing, but maximusHD worked for me on S-ON, and it has been my daily Rom for over 3 months.
When i installed it, I just couldnt run the firmware.zip (i had a fail) but it worked correctly without.
kc6992 said:
I wasn't confused. I really was S-On with twrp 2.4.1 and it worked well
Now i'am back on hboot 2.15 and i flashed CWM in order to flash CM11.
For maximusHD on hboot 2.16 and S-ON I just followed the tutorial : http://forum.xda-developers.com/showthread.php?t=2445392
I know it may sound confusing, but maximusHD worked for me on S-ON, and it has been my daily Rom for over 3 months.
When i installed it, I just couldnt run the firmware.zip (i had a fail) but it worked correctly without.
Click to expand...
Click to collapse
Ok, the thing is it's the firmware.zip that gives you a hboot version of 2.16. So if you didn't flash that, you were on a lower hboot, you can still flash the ROM I believe but you only have 2gb of storage available. Anyway, It doesn't matter now. Enjoy CM11.
CM nightly on 2.16 firmware works great for me. Updated to 0110 in the meanwhile and I only have the known bugs like backlight not coming
up after a phone call and very rare reboots (indeed no reboot on 0110 since now :fingers-crossed: )
There are indeed lots of people who installed MaximusHD on hboot 2.16 with s-on over in the MaximusHD thread. It's very dangerous though
and may lead to bricked devices ...
rosswhite said:
This thread is very confusing!
Firstly the OP must be S-Off to flash the 2.16 firmware in order to run MaximusHD with the right storage etc, no? Might be confused thinking superCID is S-Off? Also, TWRP version must be 2.6.1.0 not 2.4.1?
Did the CM 0109-nightly for 2.16 hboot you compiled flash ok? Are you running it now? I think most of the dev's have had problems getting it to install properly. I don't think you can be S-On and on 2.16 hboot, unless I'm missing something?
I tried to flash the latest version of Twistedkat ROM the other night and it wouldn't flash with any recovery that I tried on 2.16 hboot.
Click to expand...
Click to collapse
Here is an updated CM11 build for hboot 2.16, containing the latest patch for the backlight bug. Its been built from the
original CM11 sources.
https://drive.google.com/file/d/0B0ajti88ZAFzRmV3Mi1aM2lxY0E/edit?usp=sharing
Works great and I haven't had any backlight problems or reboots yet !!!
kc6992 said:
Hello everyone,
After a few month with the maximus rom i wanted to test out the new Cyanogenmod rom 11 on my htc one s.
But when i try flashing it with the recovery, it fails. I heard, that i have to downgrade something in order to get the new Rom installed. What must I do?
I have been reading a lot of topics without finding a concrete answer.
I am S-ON (No superCID) and I have TWRP 2.4.1 and Hboot 1.16
How can I install CM11 successfully ?
Thx :laugh:
Click to expand...
Click to collapse
Mozziliac said:
What Hboot are you on ?
Click to expand...
Click to collapse
Hboot 2.15
New CM11 built 140115 for hboot 2.16 for anyone who is interested
https://drive.google.com/file/d/0B0ajti88ZAFzMDl4TW1Oc2tVQVE/edit?usp=sharing
Can anyone post/link this into the CM11 development section?
Have fun ...
drkxyz said:
New CM11 built 140115 for hboot 2.16 for anyone who is interested
https://drive.google.com/file/d/0B0ajti88ZAFzMDl4TW1Oc2tVQVE/edit?usp=sharing
Can anyone post/link this into the CM11 development section?
Have fun ...
Click to expand...
Click to collapse
Now you can post it yourself.

[Q] MaximusHD+Hboot S-OFF

i just recently S-OFF through Rumrunner and i was wondering if im able to install maximusHD 10 (sense 5 + android 4.2). I'm not sure if hboot 2.16 is required, since im S-OFF with hboot 2.15. thanks.
xPhrosty said:
i just recently S-OFF through Rumrunner and i was wondering if im able to install maximusHD 10 (sense 5 + android 4.2). I'm not sure if hboot 2.16 is required, since im S-OFF with hboot 2.15. thanks.
Click to expand...
Click to collapse
Part of the install instructions for MaximusHD is updating your hboot version from 2.15 to 2.16. So yes, 2.15 is correct for now. When you go to download the ROM there are 2 files, the ROM and the installer package. The installer package contains the firmware (this is what updates the hboot to 2.16) and the recovery. This is why the instructions are a little complicated. Basically you have to flash the rom first, then flash the firmware, then flash the recovery, then flash the ROM again. Just note, you can not mount storage in TWRP recovery for 2.16. Also, if you are a stock android fan then stay on 2.15 if you want to have a greater choice of ROM's. Currently I think the only AOSP based ROM that supports the 2.16 hboot is CM11.
Sent from my Nexus 7 using XDA Premium 4 mobile app
rosswhite said:
Part of the install instructions for MaximusHD is updating your hboot version from 2.15 to 2.16. So yes, 2.15 is correct for now. When you go to download the ROM there are 2 files, the ROM and the installer package. The installer package contains the firmware (this is what updates the hboot to 2.16) and the recovery. This is why the instructions are a little complicated. Basically you have to flash the rom first, then flash the firmware, then flash the recovery, then flash the ROM again. Just note, you can not mount storage in TWRP recovery for 2.16. Also, if you are a stock android fan then stay on 2.15 if you want to have a greater choice of ROM's. Currently I think the only AOSP based ROM that supports the 2.16 hboot is CM11.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
okay, that makes much more sense now. thanks a lot!

[Q] Problems with Viper Rom

Hello,
i'm having a lot of trouble with the viper made rom ( http://forum.xda-developers.com/showthread.php?t=2667758). I'm new here, so i cannot post it there.
My problems began when i try to install the updates. I have installed the original rom version 3.0.0. i get the OTA message, but when i try to install it in recovery, the phone can't mount the sd card, and the installation doesn't continu. I tried to do it manually (using the download link i found in one of the posts) and that seemed to work.
Then i got another OTA notification, to upgrade to version 3.1.0, but when i tried to boot after the installation, i couldn't enter my sim pincode, and when i reboot, the phone keeps looping. I have to install the original rom twice (once with and one time without wiping) before the ROM boots normally.
What am i doing wrong?
i'm on Hboot 1.25 and radio:1.15.50.05.29
I'm S-on (RL)
It seems that viper made a fll rom, with the updates included.
Wrong Hboot?
Martin_Weterholt said:
Hello,
What am i doing wrong?
i'm on Hboot 1.25 and radio:1.15.50.05.29
I'm S-on (RL)
Click to expand...
Click to collapse
I'm not sure but i think it starts with your Hboot, maybe one of the older members can verify, but according to the rom it requires Hboot version 2.15 or 2.16.
I am in the process of updating my Hboot by downloading and flashing the RUU as well as achieving S-OFF status
fidodaj said:
I'm not sure but i think it starts with your Hboot, maybe one of the older members can verify, but according to the rom it requires Hboot version 2.15 or 2.16.
I am in the process of updating my Hboot by downloading and flashing the RUU as well as achieving S-OFF status
Click to expand...
Click to collapse
You need to update hboot first
2.15 is most compatible i suppose
LS.xD said:
You need to update hboot first
2.15 is most compatible i suppose
Click to expand...
Click to collapse
Question. Is there a way for me to upgrade the hboot without the ruu wiping everything? Or will I just have to make a backup. I plan to go s-off before upgrading the hboot.
fidodaj said:
Question. Is there a way for me to upgrade the hboot without the ruu wiping everything? Or will I just have to make a backup. I plan to go s-off before upgrading the hboot.
Click to expand...
Click to collapse
If you're S-OFF ist possible I think
No, you don't need to update the hboot. I am on 1.06 and Viper works fine...in fact any ROM works fine for me but that's another story. The updated firmware (2.13 or 2.15) is required only for Android 4.4.x KitKat due to a check present in the updater-script. There's no such check nor requirement for previous Android versions and Viper 3.x is based on Android 4.2.2
The problems first could come from not being S-Off...this makes impossible to flash the kernel from recovery so any OTA that has a kernel is not flashed properly. I remember that 3.1.0 has also a full ROM ZIP, maybe is good if you flash that one from recovery and flash the kernel after that in fastboot. Also it could matter the recovery you're using, I would recommend latest TWRP
Sent from nowhere over the air..
Rapier said:
No, you don't need to update the hboot. I am on 1.06 and Viper works fine...in fact any ROM works fine for me but that's another story. The updated firmware (2.13 or 2.15) is required only for Android 4.4.x KitKat due to a check present in the updater-script. There's no such check nor requirement for previous Android versions and Viper 3.x is based on Android 4.2.2
..
Click to expand...
Click to collapse
In the viper rom forum post it says ROM firmware required hboot 2.15/2.16.. Am I to j just ignore tha? Or is it that it is only required that hboot (2.15/2.16) if you are s-on and s-off can do whatever you like? Lol
You need hboot 2.16 for Radio 1.20
And to Flash hboot 2.16 you will need S-OFF
Sent from my loved HTC One S using (most time buggy) Tapatalk
LS.xD said:
You need hboot 2.16 for Radio 1.20
And to Flash hboot 2.16 you will need S-OFF
Sent from my loved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
Actually I'm on hboot 2.15 with Radio 1.20.XX
I know this doesn't help... just saying..
To contribute smth. To get the most out of the Viper 3 Rom, everyone should upgrade their Radio to 1.20.XX. And this is actually why you need to S-OFF.

[Q] Updating to CM 11

Hello
Im trying to update my HTC One S from CM 10.2 to CM 11. (Just install cm and gapps and wipe cache and dalvik).
Unfortunatly I am not able do so, I always end up with an endless bootanimation.
I found no specific information about my problem on the internet, I just heard something about HBoot 2.16.
So my question is do I need Hboot 2.16 to update to CM 11? And is there a way to do so without losing my data?
Thanks in advance.
My current setup:
CM 10.2
Hboot 2.15
TWRP 2.7.0.8
Unlocked but S-On (RL)
Maxanier
maxanier said:
Hello
Im trying to update my HTC One S from CM 10.2 to CM 11. (Just install cm and gapps and wipe cache and dalvik).
Unfortunatly I am not able do so, I always end up with an endless bootanimation.
I found no specific information about my problem on the internet, I just heard something about HBoot 2.16.
So my question is do I need Hboot 2.16 to update to CM 11? And is there a way to do so without losing my data?
Thanks in advance.
My current setup:
CM 10.2
Hboot 2.15
TWRP 2.7.0.8
Unlocked but S-On (RL)
Maxanier
Click to expand...
Click to collapse
Don't you forget to flash the boot.img after flashing the rom ?
Also I'm not sure but I guess it's better to do a full wipe (without internal storage of course) before upadting from a version to another.
Don't care about 2.16 hboot it's only needed for few sense roms. Official CM11 updates are built for 2.15
benJX said:
Don't you forget to flash the boot.img after flashing the rom ?
Also I'm not sure but I guess it's better to do a full wipe (without internal storage of course) before upadting from a version to another.
Don't care about 2.16 hboot it's only needed for few sense roms. Official CM11 updates are built for 2.15
Click to expand...
Click to collapse
Ok, I did not flash the boot.img, did not know I had to to this, I will try it later.
Thanks
Is it possible to flash the Boot Image with the recovery or is the only way by the fastboot command?
My Setup:
CM 11
HBoot 2.15
CWM v6.0.4.8
Unlocked but S-ON
To my knowledge, you need to use fastboot as you are S-ON. If you can, try to get S-OFF, it will be simpler.
Envoyé de mon HTC One S en utilisant Tapatalk
Ok thank you! I already tried S-Off but it doesen't worked. Is S-Off possible with hBoot 2.15?
A7X_2010 said:
Is S-Off possible with hBoot 2.15?
Click to expand...
Click to collapse
Yes, try Rumrunner.
I did S-OFF with rumruner.. Reed carefuly instructions.
http://forum.xda-developers.com/showthread.php?t=2487888
h-boot 2.15 is regular.
You're S-ON. Open rom.zip.
Copy "boot.img" to another folder.
Boot phone in bootloader. Plug cable. "Fastboot USB" will show on screen.
Open comand promt. Type this : "fastboot flash boot boot.img".
Ready.

[Htc one s ] : Flash CyanogenMod ROM with HBOOT 1.06

Hi,
I would like to Flash CM rom on my HTC one s. it's already rooted and S-Off
HBOOT version 1.06
CID : 11111111
MID : PJ4010000
The problem is that the higher recovery i can flash on it is TWRP 2.6.3, i can't flash a higher version.
And everytime i flash any version of CM it doesn't work.
On CM website they say : The minimum version of recovery that can be used to install CyanogenMod on this device is: ClockworkMod 6.0.4.8 or TWRP 2.7.0.8. See this page for more information.
they also say : The following HBOOT versions are supported by CyanogenMod 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444. Devices with older bootloaders should have their firmware updated before attempting to install CyanogenMod.
So i tried to flash 2.7.0.8 and higher but nothing works.
My intuition is that i should upgrade the firmware to allow the right recovery version but everywhere i read that HBOOT 1.06 is the best and that i should keep it.
So before i make a mistake, could anyone help me on matter.
PS: feel free to ask me for logs or error messages.
My best.

Categories

Resources