Huawei g6-u10 red light - Huawei Ascend G6

Hi I am an Iranian user if you type is wrong. Sorry.
I do not tire width
I got a phone g6 was good before I make my arrows. But after 3 days in case of a sudden say come on and off Nvshkh unauthorized use.
Black Sfhsh whatever quarter it was not Mznm not put up STATE recovery.
Flat-Sayed and all Qtatv I test no problem. Please advise Thank you'm stuck

please try to ask again, or use some automatic translator, because I do not understand what are you trying to say, so I can't help you.

With unauthorized use Power
After the taps just lights up on the field and do not have any reaction

Do you have flashed any ROM or try to root the phone?!

Related

align screen starts over and over again

today i flashed a new rom
as u all know the "align screen" setup is the first that starts within the initial setup
but it wont complete, it just starts over and over again
i remember that i had the same problem during the last rom i used but i just killed the process and forgot about it, but now i cant kill it bcs its newly flashed
did any of u had the same problem before?
ok solved , after getting a bit angry and googling for 30 min i hammered a bit harder with my finger
dont ask me why but this helped at the first try
maybe some of u could explain why that is and/or how to get it better solved
This is supposed to be a CALIBRATION screen. It expects you to be as precise as possible. Using your finger instead of a stylus is usually not precise enough, and being detected as such, hence the calibration restart. All you really had to do is use the stylus, not your finger. Pressing harder with your finger makes it easier on this type of the screen to detect it's location, hence results in a little bit better precision. Thats the reason it allowed you to pass that screen after all.
sry for the late answer
im using the stylus ofc, but this aint help any much
only when i use my finger and press a bit harder im able to "calibrate"
installed some roms since my first post and the problem stays
Hello friends, I am Brazil, sorry for my english ...
I'm having the same problem to calibrate the screen on my HTC TOUCH CRUISE (P_3650), researched several posts, but could not solve the problem, I installed other ROMS, but also not resolved the problem, returned to ROM 6.0 ORIGINAL factory, but after a while the screen loses calibration is not working anymore ...
I ask to help me solve this problem ...
Thanks

How to factory reset Galaxy Nexus?

I have a Google Galaxy Nexus bought unlocked from Google about two weeks ago.
A few hours ago, I seem to have unintentionally locked myself by setting both a PIN and PUK. I was not aware that I was setting anything more than a 4 digit PIN. Whatever a PUK might be, is not explained in the manual printout here in front of me.
I was presented with a numeric keypad screen that wanted me to set (reset?) both. Across the top of the screen I was getting a marquee saying I needed a min of 8 characters and below that, a field for PIN and a field for PUK (it would have nice to at least once be told what that acronym stands for).
Cancel only just turns off the screen (not the phone). Same with OK.
So, I did power off. But when I turned power back on I get that same screen and the phone is locked.
So, I read the manual again. No real help on how to have avoided this or how to get out of this trouble.
I searched the net. I found instructions somewhere that told me I could do a factory rest that would loose all data, etc. Since I have only had this phone for a short while and done little to customize it, I could live with that. My mail, calendar and photos are synched to my desktop.
So, I followed the instruction for factory reset (and took note that the manual with this expensive device is no help with this important function nor does it give me a phone number for support. Shame on someone for that decision.)
1. power off
2. hold volume button
3. hold power button
That returned a screen with a large Anroid character, plus a large right facing arrow containing the word "Start" in the arrow. Beneath the android it says "Downloading. Do not turn off target!!" The double exclamation marks suggest this is to be obeyed.
Another aside to whoever designed this thing. the first rule of communication is, "The effectiveness and efficiency of any message is 100% the responsibility of the sender." The corollary to that is, do not use jargon or technical terms unless you include a definition.
So, what or who is a "target?" Other than a set of concentric cirles and the name of the place my wife buys Martha Stewart sheets , I know no other target.
BTW - if I am supposed to touch the arrow to launch something (and perhaps turn off the target?) it's a waste. After 15 minutes of no action, I touched it. Nothing happened.
So now I have a screen that tells me to not do something, leaving me with the fear of doing anything at all. And even if I should do something, like touch the Start, nothing happens. Now close to 1/2 hour has passed and the "downloading" message is unchanged. WTF is it downloading? Anything at all?
Do I now own a warm paperweight whose enigmmatic screen will go dark in a few hours?
Or can I do something that actually works?
Thank you for your patience in reading this. The book Alice In Wonderland was shorter and much more interesting.
Any useful suggestion will be appreciated.
update on stuck reset
After the phone sat here onm desk for a few hours, with that same screen and warning (do not close target). I picked up the phone to move it to the side.
When i grabbed it, I accidentally squeezed the power button. That ascreen wnet away and then it blinked back to the screen tthat wants the PUK and PIN.
Any idea wht to do from here?
As I said at the start, I am willing to do a factory reset. Obviously I do not know how.
Advice, please?
Easy.
joehark said:
I have a Google Galaxy Nexus bought unlocked from Google about two weeks ago.
A few hours ago, I seem to have unintentionally locked myself by setting both a PIN and PUK. I was not aware that I was setting anything more than a 4 digit PIN. Whatever a PUK might be, is not explained in the manual printout here in front of me.
I was presented with a numeric keypad screen that wanted me to set (reset?) both. Across the top of the screen I was getting a marquee saying I needed a min of 8 characters and below that, a field for PIN and a field for PUK (it would have nice to at least once be told what that acronym stands for).
Cancel only just turns off the screen (not the phone). Same with OK.
So, I did power off. But when I turned power back on I get that same screen and the phone is locked.
So, I read the manual again. No real help on how to have avoided this or how to get out of this trouble.
I searched the net. I found instructions somewhere that told me I could do a factory rest that would loose all data, etc. Since I have only had this phone for a short while and done little to customize it, I could live with that. My mail, calendar and photos are synched to my desktop.
So, I followed the instruction for factory reset (and took note that the manual with this expensive device is no help with this important function nor does it give me a phone number for support. Shame on someone for that decision.)
1. power off
2. hold volume button
3. hold power button
That returned a screen with a large Anroid character, plus a large right facing arrow containing the word "Start" in the arrow. Beneath the android it says "Downloading. Do not turn off target!!" The double exclamation marks suggest this is to be obeyed.
Another aside to whoever designed this thing. the first rule of communication is, "The effectiveness and efficiency of any message is 100% the responsibility of the sender." The corollary to that is, do not use jargon or technical terms unless you include a definition.
So, what or who is a "target?" Other than a set of concentric cirles and the name of the place my wife buys Martha Stewart sheets , I know no other target.
BTW - if I am supposed to touch the arrow to launch something (and perhaps turn off the target?) it's a waste. After 15 minutes of no action, I touched it. Nothing happened.
So now I have a screen that tells me to not do something, leaving me with the fear of doing anything at all. And even if I should do something, like touch the Start, nothing happens. Now close to 1/2 hour has passed and the "downloading" message is unchanged. WTF is it downloading? Anything at all?
Do I now own a warm paperweight whose enigmmatic screen will go dark in a few hours?
Or can I do something that actually works?
Thank you for your patience in reading this. The book Alice In Wonderland was shorter and much more interesting.
Any useful suggestion will be appreciated.
Click to expand...
Click to collapse
Just go to the shop you got the SIM and they will unlock it for you with a new PUK code!

Help fast !!! i messed with simulate secondary screen Android one Karbonn sparkle V

Please help me asap
i was just messing and seeing the tweaks i could make on my android 6.0 device (karbonn sparkle V)
i stumbled upon (simulate secondary screen ) and i thought ill see what it is ....... i chose the 4k(secure) option and sudenly my whole screen had this translucent - black layer above my screen and i could not do anything on my phone since that layer was above all buttons and i very stupidly shut my phone screen and started it again only to see my phone locked since i had set a pattern lock.
so the case is i cant unlock my phone since that layer or secondary screen is literally covering my phone
and because i cant unlock my phone i cant get into any sort of recovery or anything
i have been searching for ways to fix this but everywhere i can only see the (stuck in loop ) tutorial which is not my case
please.. please help me i need it fast
the reason i came here as a last resort is because i've seen XDA as very helpful site
My phone is rooted
Karbonn sparkle V (android)
android marshmallow
You can move the secondary screen just move the display by drag and drop move the upward screen down and you can see the Simulate secondary display option then choose the lower is a resolution and move it down and then again to the lower resolution then chose to none and you can remove the secondary display
I have the same problem on my LG Leon 4G and I can do nothing to fix it. Can you please help me?( I have some important projects and photo on it)
I had this problem I was able to move red square and set it back to none then restarted my phone and it was better again I have a S9Plus hope this help
i want help please please someone we had the same problem like this guy posting this
Bruh someone please help me i had the same problem and I have password in it and I can't even get out or play games why the **** would they put this feature to phones that doesn't even make a lot of sense my phone is Huawei Android 6.0 marshmallow too and I don't want to cry everyday cuz I just missed my games maaan why whyyyyyy....... someone please please please!!!! Help me just even this time someone please and I'm totally crying right now while righting this now it's 2019 and I hate it I wish I had a power to reverse time and warn myself not to do that.. if your asking ''what phone are you using right now?'' The phone I used now is good old Samsung with no games and no storage data to download games and now Im sad Af and I'm crying too I'll hope someone will read this and help me I missed my games so much.. I wish I'll have pc so I can play more games and with more games its more fun and I'm that man ''with no games no life man'' so I'll hope someone will help and I wish my parents will give me pc for my birthday now is 01/11/19 if you don't know what that is its January 11, 2019 i hope this will be seen by someone who know to help someone with people with this ****ty phone feature phone problem btw sorry for my bad words okay if there is a kid willing to help out there.
way out
go to safe mode,
you can googling how to turn safe mode based on your handphone type
and then back to developer option menu, on simulate secondary screen choose -->> none
and restart your phone
it works for me
Same Problem
I have the same problem on the FiiO M6
nudnick said:
I have the same problem on the FiiO M6
Click to expand...
Click to collapse
Argh! Me too. Did you ever get it fixed? How did you do it?
I have the same problom to, i can’t even go to the control center!!!, I tried doing a force restart, but i did NOTHING, So i will wait for it to die so i can try to go in recovery mode, I want android to remove this feature right now! This feature is seriously dangerous! So now i can’t use my phone?! IS THIS FEATURE PERMANENT?!
Well, I'm answering your question from 2023 lol..
First of all you need to turn your phone into 'safe mode' - This safe mode is just like an emergency exit from rough situation.
There are two ways to turn on safe mode.
1. Press and hold the power button
- you'll see two options; to 'power off' or 'restart'
2. Press and hold 'power off' for some few seconds
3. The safe mode interface will pop out asking you whether to 'Reboot to safe Mode'
4. Click on 'Okay' or 'Yes' (But if your screen monitor is not allowing you to click the area, see option 2)
It will reboot to safe mode,.then you can operate your phone and deactivate any developer option setting you did...after deactivating turn off developer option if you want and then 'restart' your phone, it will come back to normal.
Option 2.
1. Turn off your phone by any way you can.
2. Now turn it on, immediately it starts the animation or 3 seconds after you switch it on,.
Press and hold the 'volume down button' until your phone vibrtes
This will take the phone to 'safe Mode' then you can undo all your settings, then restart your phone..
Thanks for reading, I hope this helps? You can email me [email protected]

Recover Data from a broken screen

Hi,
my name is Frank and this sad post will be my first post on XDA...
My phone fell off my pocket when i was crossing a road, when i noticed it wasnt on my pockets i went back my steps and saw my phone on the middle of the road but sadly some car passed and my phone got smashed. Now i have my Oneplus One with the screen broken on 100000 pieces. The LCD connector/wire at the top right is broken, i only have half screen left , the rest fell off.
Ok, clearly im not going to repair it. But i have some important pictures that i want to recover, for example photos of my last trip to China and some PDF document.
By now, the phone is turned on, the notification led is flashing, windows 10 recognizes it like "One", Volume UP/Down button is broken, not the button itself, i mean the wires inside, i know it because ive opened the device to take a look. It had a 4 pin code to unlock.
Debugg Mode is OFF, Official Stock Rom (the version is the first one, lets call it "vanilla" i bought the phone on the first days and i never updated)
I used some "handsome" software found in google to recover the data, many of them do not find the phone, others ask for debug mode on.
ADB devices command from SDKPlatforms Tools do not detect any device.
What can i do? Help me please. Sorry for my grammar, but english isn't my mother language

Black screen except for camera? J7 Crown. no USB debugging. Recovery mode access

Situation: Samsung Galaxy J7 Crown. Never messed with. USB Debugging not enabled No special permissions (no ADB). I am able to access the Android Recovery screen. Obviously wipe cache partition didn't help, nor Lacking storage booting. Other than the Recovery and download screen: I get the Power/Restart icons when booted normally. Reset works, but power doesn't turn the phone off. No phone calls, Yes notifications. Camera from lock screen comes on (triple click on home button) and touch screen works.
I've tried to trace out the lock pattern in the hopes its still working outside this specific situation. No indication that it is.
All i want is a few sentimental pictures. Although after an entire day of frustration, finding out that the only thing that works is the camera is kinda funny and ironic.
Ive looked on XDA forums, but I'm having no luck w/ exact situation, although I'm sure someone has been in the same situation or similar enough.
Spent all day looking at options (Odin?) and nothing looks like it would work out for me.
Knowing the camera works, makes me hopeful that a mirror would work? No reaction to lock screen pattern makes me think not.
Additional (maybe irrelevant) info. Shows up on home WiFi while Find My Mobile said it was offline (makes sense with Notifications/no calls)
Any advice? Just point me in the right direction if there is one.
If not i hope you appreciate the Irony here. Thanks
(I used to be not so bad tech support, but haven't been keeping up as of late, and today was a painful reminder. Take pity on me.)
Black Screen Except Camera - Galaxy J7 Crown
Hey there anick22! I was so glad to see a search result with something referencing the camera working, on an otherwise completely black screen! I was super bummed to see that noone had replied to your plea for help with this insane problem!! I hope you found a solution by now!!
My 2 month old Galaxy J7 Crown suddenly went black on me one day, and it didn't happen as a result of a drop, or spill, or any other damage. I don't recall having put any new or different apps on it, recently, either.
The triple click of the Home button does open the camera, and the screen lights right up, perfectly. It takes it's usual beautiful pics, and I'm able to use all of the camera functions. I'm even able to view any photos I took during that particular session, buy not any prior pics, because I'm unable to unlock the phone.
"Hey Google!!" also reacts, and will display the result of any question that I may ask it, but I'm unable to go into the answers, without the ability to unlock my phone.
I have been able to get the phone into safe mode, while attempting to power it off, by pressing the power button, and then tapping on "power off" (although this hasn't worked every time I've tried). While in safe mode, "safe mode" is displayed in the bottom left hand corner, but nothing else appears on the screen.
Upon powering up the phone, all of the normal things happen. It shows "Samsung" and goes on to the blue screen to show the "Trac Fone" logo, but once the phone is booted up, the screen is black!!
PLEASE tell me that you were able to find a solution to this!!! I went and purchased a new Moto G7, (since I had a Droid Turbo 2 in the past, and it was amazing!!), and I'm beyond ready to get back to my J7 Crown!! PLEASE HELP!!
Thanks so much!!!
By the way, I'm a newbie here, as If you couldn't tell!!

Categories

Resources