need some help. - Galaxy Note Pro 12.2 Q&A, Help & Troubleshooting

so i attempted to root my note pro 12, and it didnt work out so good. get the message "firmware upgrade encountered an issue. select recovery mode in kies and try again." i have tried to restore using kies but says device not supported when connected. i have tried to update drivers but still nothing(windows 8.1 on surface pro3). i have tried 2 other computers both windows 7 with same results. i have searched this forum and others for info, only thing i can find is to install stock firmware using odin, but cant find the stock firmware anywhere. according to samsungs software download website the note pro 12 does not exist. can anybody help or point me in the right direction? any help is greatly appreciated.

Related

[Q] Bricked Note 10.1 N8010 PLEASE HELP !!!

Tried to update the firmware to JB, but ODIN failed half way through.. tried several times with stock firmware as well as N8000 firmware, but same result. drivers are installed and present.
tried Kies several times from emergency restore, but allthough it detects the Note, it cant connect to it... tried different computers but with no success.
any suggestions will be greatly appreciated...
Many thanks
Update via Odin with KIES off make sure its not running .
jje
First of all get an 8010 firmware and try to install that if you already have it the suggest get it from samfirmware and also download the firmware for your region.
If ODIN is connecting to your tab then the issue is not with drivers most probably there is an issue with the copy of firmware you downloaded just download it again.
I do not think updating while kies is on is such a big issue I never face any issue but may be it was connected to kies anyways just to be safe exit kies
Open task manager and kill all kies related stuff, if you just close it you will have some processes running. Only after that start odin and get on flashing whatever you have.
Sent from my GT-N8010 using Tapatalk 2

[Q] brick ??!

Hi everyone,
I have currently some big issue with my GT-N8010.
My custom rom wasn't running very well so I decided to reset my tablet and go back to a new fresh installation.
I downloaded the latest firmware of the tablet on sammobile and started to update it with Odin PC, but in the middle of the transfert I got an error and now my tablet is stuck on the "Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.".
I have no idea how to fix it! And I can't go back to download mode anymore. On top of that, my tablet seems not to be recognize by my computer (I tried to install Kies and the samsung usb driver several times but it keeps saying that's the driver is not ok)...
Can someone help me please ?
Thank you in advance!
What custom rom did you had ? 4.4.2 or 4.1.2 ?
KoRoZIV said:
What custom rom did you had ? 4.4.2 or 4.1.2 ?
Click to expand...
Click to collapse
It was a 4.1.2 (HD Revolution) and I tried to flash with odin the N8010XXUCMK2_N8010XSACNA2_XSA
First uninstall kies and all usb drivers. Restart your computer.
If you can get in download mode (power+volume down then volume up when asked) :
Install some drivers from the sticky topics here on xda. Download the firmware again from another location if possible. Use a different usb port.
If you can't get in download mode, you have to try with kies. I never had success whit it, and i really need it. But it says that n8010 does not support initializing or something like that. Maybe someone else can help with kies.
Sent from my GT-N8010 using Tapatalk
I don't know where it comes from...
I tried everything, uninstall/reinstall Kies/Usb driver, put a VM with Win7 (As I am under Windows 8.1), put Win7 in dual boot to maybe fix the compatibility issue but nothing seems to work! And of course I don't have any other computer to use...
That's maybe the reason the tablet get broken as I used to use Odin on another PC and I didn't check if the usb driver was installed on this one??
I just know that Odin recognized my tablet so I was able to launch the installation of the new firmware.
I feel really bad...Hope the tablet is not definitly dead!
Faulty USB cable perhaps ?
Sent from my GT-N8010 using Tapatalk
Ok so I went to a Samsung store and they told me that I have to send my tablet to the repair center in the country where I bought the device.
It's a big issue for me as I am now living in Australia and my tablet has been bought in France.
On top of that the guy from Samsung explained me that now it's normal if my tablet is not any longer recognize by my computer...
I heard about JTAG, I don't have any idea about the subject but may it fix my problem?
Does someone know how samsung is able to fix the tablet, so I may fix it myself instead of sending to them...?

[Q] FIrmware upgrade encountered an issue

Hi All,
I'm hoping someone can help me with my non-rooted Samsung Galaxy Tab 2 10.1 Tablet (GT-P110). The tablet won't go into download or recovery mode, and it's saying "Firmware Upgrade encountered an Issue. Please select recovery mode in KIES and try again". I've tried using Kies, but it's not recognising the device.
I've downloaded Odin 3.09 and a stock ROM from Samsung Updates. When I go to flash the ROM via ODIN it fails at around the 60-70% mark. I've tried a different stock ROM, but the same thing happens.
Is there anything else I could try?
Many Thanks...
GalaxyTabTwo said:
Hi All,
I'm hoping someone can help me with my non-rooted Samsung Galaxy Tab 2 10.1 Tablet (GT-P110). The tablet won't go into download or recovery mode, and it's saying "Firmware Upgrade encountered an Issue. Please select recovery mode in KIES and try again". I've tried using Kies, but it's not recognising the device.
I've downloaded Odin 3.09 and a stock ROM from Samsung Updates. When I go to flash the ROM via ODIN it fails at around the 60-70% mark. I've tried a different stock ROM, but the same thing happens.
Is there anything else I could try?
Many Thanks...
Click to expand...
Click to collapse
Try a different cable if possible, different pc/laptop and go to samsung website and download drivers for your tablet model. Sometimes Kies doesn't do a good job with drivers.
Try rebooting tablet and connecting it right away to pc/laptop.
Good luck.
Pp.
PanchoPlanet said:
Try a different cable if possible, different pc/laptop and go to samsung website and download drivers for your tablet model. Sometimes Kies doesn't do a good job with drivers.
Try rebooting tablet and connecting it right away to pc/laptop.
Good luck.
Pp.
Click to expand...
Click to collapse
I have tried a different cable, laptop and downloaded the drivers from the Samsung website, but I was still stuck with the same problem. I tried using Odin 3.07 and this got me further than before. It went through the flash process and I then got the blue reset message. The problem is that the tablet doesn't reset and just goes to a black screen. When I try to manually reset the tablet it comes back with the same message "Firmware Upgrade encountered an Issue. Please select recovery mode in KIES and try again"
Has anyone got any other suggestions I could try?
Many Thanks...
I've had the exact same issue before and in my case simply removing the external sd card before flashing with Odin solved the problem.
Sent from my SGH-M919 using Tapatalk 2
I never thought of that because I keep a nandroid copy on my external SD, so I always pull it from my phone or tablet when flashing /reset just to be safe. Doesn't everyone do that?
Pp.

Help with a soft brick GT-P5113

I've searched for nearly 12 hours and tried several methods, but since this is an older device a lot of threads and links are dead. I was hoping someone could give me advice here, and I did use the search but to no avail.
The situation is I have a Galaxy Tab 2 10.1 (GT-P5113) and it's stuck on the logo and the sound it boots up cuts out half way (wondering if it's a hardware issue). I can boot into Download Mode and I have the drivers for it on my computer. The problem I'm having is USB Debug wasn't enabled. Is there a way I can flash through Odin3 and which version should I use? This device isn't rooted either. Any help or advice would ease my mind.
Moceimo said:
I've searched for nearly 12 hours and tried several methods, but since this is an older device a lot of threads and links are dead. I was hoping someone could give me advice here, and I did use the search but to no avail.
The situation is I have a Galaxy Tab 2 10.1 (GT-P5113) and it's stuck on the logo and the sound it boots up cuts out half way (wondering if it's a hardware issue). I can boot into Download Mode and I have the drivers for it on my computer. The problem I'm having is USB Debug wasn't enabled. Is there a way I can flash through Odin3 and which version should I use? This device isn't rooted either. Any help or advice would ease my mind.
Click to expand...
Click to collapse
download a copy of your device stock firmware, if you already have it, flash it with odin, there is no specific version of odin, it works on all as long as your device gets connected and shows in odin you are fine.
regarding the hardware issue, it might be or it might be not, you can only be sure after successfully flashing a stock firmware file.
it won't need any USB Debug option for flashing stock firmware so you are safe to flash.
If odin does not work you may try going to the recovery and perform a factory reset and delete cache

Samsung S2 tablet Model #GT-P5113

my tab is stuck at error message " Firmware upgrade encountered an issue. Please select kies recovery mode in kies and try again". I have tried Kies but it does not recognise the device. It says this device is not supported. tried smart switch too but the same result. I tried to flash the firmware using Odin but it failed too. I do not know what I am doing wrong. Any help on this will be appreciated. Thanks In advance
Give me logs of odin.
The most common reasons for odin to fail would be absence of USB drivers for your device.
HIT THANKS IF I HELPED YOU!!

Categories

Resources