CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page
https://wiki.cyanogenmod.org/w/Nx510j_Info
Important information:
This thread is for official CyanogenMod 12.1 builds for ZTE Nubia Z9 Max. The following will not be supported here:
Custom kernels
Mods
Xposed
Baseband requirement:
You *MUST* install nubia UI v3.68 and boot into it, and make sure it works properly to update your baseband data, before you install CyanogenMod 12.1, or telephony won't work.
Download link to nubia UI v3.68: http://yunpan.cn/OcLCfCXZUG2ytW passward: 7ae9
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
What works:
Everything
Installation:
First time flashing CyanogenMod 12.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery, e.g., my TWRP: http://forum.xda-developers.com/android/development/recovery-twrp-recovery-2-8-7-0-nubia-z9-t3154895
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/cyanogenmod
https://github.com/dianlujitao
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog:
15/12/3
Join the official CM12.1 family
15/11/29
Sync latest CyanogenMod code
Update kernel to LA.BF64.1.2.1.c1-04310-8x94.0
Update radio&vendor blobs from nubia ui v3.68
Fix compass(by nubia)
15/11/23
Sync latest CyanogenMod code
Build kernel from latest source(Thanks to nubia engineer for help)
Add support for F2FS data&cache
Switch to OSS wlan driver
Allow 320K AAC encoding
Color temperature interface using PCC
Set BFQ as default IO scheduler
Workaround debugfs race in binder
15/11/9
Sync latest CyanogenMod code
Support mount exfat partition
Clean up unused proprietary blobs
Enable C2D composition
Restrict cores to 0-3 in boot stage to reduce boot current
Restruct keyhandler to fix wakeup with proximity check
Show usbdisk in storage settings to allow unmount it
15/10/31
Sync latest CyanogenMod code
Update kernel&propritary blobs&radio image from nubia ui v3.62 release
Add missing & clean up unused proprietary blobs
15/10/19
Sync latest CyanogenMod code
Update kernel&propritary blobs&radio image from beta357, more stable and powersave than ever before!
Add double tap to wake
Add proximity check on screen wake
Build libril.so
Build GPS HAL
Update audio calibration database
15/9/25
Sync latest CyanogenMod code
Fix left/right button leds
From now on we have full hardware support, and it runs stably. Beta is over, RC coming!
15/9/17
Sync latest CyanogenMod code
Clean unused init scripts & vendor blobs
Fix random reboot (Especially when calling)
15/9/4
Sync latest CyanogenMod code
Update kernel and vendor blobs from official Android 5.1.1 beta353, this fixes lots of bugs
15/8/29:
Sync latest CyanogenMod code
Update kernel and vendor blobs from official Android 5.1.1 beta352
Build with CM-shipped display/media
Fix no sound when play some videos
Fix no voice when calling via SIM2
Add radio images in zip, so you don't need to flash a official release before flash this one.
15/8/18:
Sync latest CyanogenMod code
Fix signal strength for CDMA based LTE.
Enable Doze mode
Update kernel and vendor blobs from nubia UI V3.03
15/8/10:
Sync latest CyanogenMod code
Fix bluetooth issue in beta2
Adress more SELinux denials
Fix saving network mode, [email protected]
15/8/9:
Sync latest CyanogenMod code
Fix headset
Fix camera store to external sdcard
SELinux Enforcing
Merge update from Qualcomm baseline
15/7/28:
First release
Download:
http://get.cm/?device=nx510j
XDA:DevDB Information
CyanogenMod, ROM for all devices (see above for details)
Contributors
dianlujitao
Source Code: https://github.com/cyanogenmod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-07-28
Last Updated 2015-12-05
Reserved
No access to the SD card for recording, such as the camera does not store the photos on the SD card.
R0iZ said:
No access to the SD card for recording, such as the camera does not store the photos on the SD card.
Click to expand...
Click to collapse
will fix soon
at long last! cm12.1 for z9 max! will try asap!
Can you add the Network Traffic indicator to the statusbar?
R0iZ said:
No access to the SD card for recording, such as the camera does not store the photos on the SD card.
Click to expand...
Click to collapse
easy fix
just flash xposed and install xinternalsd and it will give acess to sd card
manhar2108 said:
easy fix
just flash xposed and install xinternalsd and it will give acess to sd card
Click to expand...
Click to collapse
Which xposed i should flash? I tried some packages, no success
Is there a double tap to wake option?
I also tried installing xposed. No luck too, keep getting bootloop
R0iZ said:
Can you add the Network Traffic indicator to the statusbar?
Click to expand...
Click to collapse
No need, I've done it myself
R0iZ said:
Which xposed i should flash? I tried some packages, no success
Click to expand...
Click to collapse
Sdk 22
Should I provide u the link?
cm 12.1
on lava iris x8
R0iZ said:
Can you add the Network Traffic indicator to the statusbar?
Click to expand...
Click to collapse
Just keep it in CM's way
manhar2108 said:
Sdk 22
Should I provide u the link?
cm 12.1
on lava iris x8
Click to expand...
Click to collapse
Please provide link. I've tried using romracer's build. I always go into bootloop. Tried waiting dor 10 mins. No luck.. Thanks
esd917 said:
Please provide link. I've tried using romracer's build. I always go into bootloop. Tried waiting dor 10 mins. No luck.. Thanks
Click to expand...
Click to collapse
Yes, i've also tried romracer's build, and the same result
---------- Post added at 09:43 PM ---------- Previous post was at 09:42 PM ----------
dianlujitao said:
Just keep it in CM's way
Click to expand...
Click to collapse
What do you mean?
How can i use wake gestures??
kiranveerjatt said:
How can i use wake gestures??
Click to expand...
Click to collapse
Not supported yet
Can we use it for our ZTE Nubia Z9 Classic (NX508J) ?
It has the same specs like the Nubia Z9 Max i think. Or short changes ?
Thank you
Please add gesture support
kiranveerjatt said:
Please add gesture support
Click to expand...
Click to collapse
For wake up gestures use gravity box
Sent from my lava iris x8 using XDA Free mobile app
There is no working xposed
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 13
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This works only on XT1540, XT1541, XT1542, XT1543, XT1544, XT1548 and XT1550.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Working
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Camera ( Videos And Photos )
Video Playback
Not Working/Bugs
-
Installation
Requires Unlocked Bootloader & a custom recovery
Place ROM & Gapps in your virtual SD
Reboot in Bootloader Mode
Go to "Recovery" (Vol +/Vol -) and confirm (power)
Wipe Data/Factory Reset
Wipe Dalvik cache
Install the ROM zip
DO NOT REBOOT
Install the Gapps zip
Reboot
Downloads
Snapshot: get.cm | AFH Mirror 1 | AFH Mirror 2 | Mirror 3
Latest Official Nightly here, thanks @playenball for mirroring.
Basketbuild (older builds)
Sources
Make sure the rom you are porting have these commits or add them
Fix for WiFi crash
Support for gzipped firmware files [in firmware/image]
Credits
@LuK1337 and @luca020400 for Motorola MSM8226 M bringup
@scritch007 for his CM12.1 surnia port
XDA:DevDB Information
CyanogenMod 13, ROM for the Moto G 2015
Contributors
Alberto97, squid2
Source Code: https://github.com/CyanogenMod/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2015-11-21
Last Updated 2017-01-13
Changelog
Changelog
24/03/2016
Support for Virgin Mobile Data Done Right
Osprey proprietary files from MPI24.107-55 release
Merged latest Motorola kernel sources (MPD24.107-52)
Other (check cmxlog until 24/03)
12/03/2016
March security patch
Other (check cmxlog until 12/03)
05/03/2016
50/60fps YouTube videos are working now
Merged latest Motorola kernel sources (MPI24.65-39)
Conservative governor enabled
Other (check cmxlog until 05/03)
27/02/2016
Fixed a bug where stow sensor "replaces" proximity one when Hand wave gesture beign disabled.
Other (check cmxlog until 27/02)
20/02/2016
Dolby Surround 2 Audio Processing enabled
Missing Play Store permissions added (Bluetooth, Compass, Front Camera, Accelerometer)
Other (check cmxlog until 20/02)
13/02/2016
Fixed "Invalid number" error
Enabled Call Recording
Even more blobs from MPI24.65-33.1
Other (check cmxlog until 13/02)
06/02/2016
QC Denoise enable for better photos
New camera blobs and touchscreen firmware from MPI24.65-33.1 release
Other (check cmxlog until 06/02)
30/01/2016
Final fix for Virgin Mobile Variant
Initial support for US Cellular CDMA variant
Other (check cmxlog until 30/01)
23/01/2016
Security fixes (kernel side)
Other (check cmxlog until 23/01)
16/01/2016
Virgin Mobile variant should be fine now
Face Detection and Tap to Focus have been fixed
GPS Improvements
Bluetooth Updates
Kernel based on latest Motorola one (MPI24.65-24)
Other (check cmxlog until 16/01)
09/01/2016
HDR on stock camera fixed
Snapdragon Camera instead of Camera2
Other (check cmxlog until 09/01)
05/01/2016
MIDI Support
Built with GCC 4.9 Toolchains from Google
Patches from January Security Bulletin (Kernel only)
Other (check cmxlog until 05/01)
24/12/2015
New gesture to silence calls ported by @scritch007
New Camera blobs from MPI24.65-25 release
Less hacked libs
Other (check cmxlog until 24/12)
14/12/2015
Kernel Updates (f2fs, prima WLAN drivers, other updates from Motorola and some improvements by @squid2)
Now prima WLAN is built out the kernel -> Custom kernels need an update to get working WiFi
Other (check cmxlog until 14/12)
07/12/2015
Another attempt for CDMA
Other (check cmxlog until 7/12)
03/12/2015
Enforcing SELinux (http://review.cyanogenmod.org/120221 and http://review.cyanogenmod.org/118765)
GPS now is better (http://review.cyanogenmod.org/122120)
Working MSIM
Little updates from the M soak test (http://review.cyanogenmod.org/121346 and http://review.cyanogenmod.org/121347)
Other (check cmxlog until 3/12)
23/11/2015
SDCard encryption probably fixed (you should be able to use your SD as internal memory now)
Preferred Network selection fixed (http://review.cyanogenmod.org/121045)
Sprint/Virgin Mobile fixes (needs testing)
Initial MSIM fixes (THIS DOESN'T MEAN MSIM IS FINE NOW)
Graphic fixes in Settings (http://review.cyanogenmod.org/120785/ and http://review.cyanogenmod.org/121139/)
New Firmware loading logic (http://review.cyanogenmod.org/120974)
21/11/2015
Initial Release
Reserved
Yes i've been waiting for this! Good work i will test it in a couple of days.
Waiting for this
Thanks for your hard work. Any gapps you recommend? I flashed with opengapps and was greeted with a bunch of Google play services crashes.
Working great so far!!!
Sent from my MotoG3 using Tapatalk
Is doze working?
Woohoo!
---------- Post added at 02:31 AM ---------- Previous post was at 02:28 AM ----------
Rainbowtoast said:
Thanks for your hard work. Any gapps you recommend? I flashed with opengapps and was greeted with a bunch of Google play services crashes.
Click to expand...
Click to collapse
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
Use dynamic
- you'll get services FC's just grant google services all permissions.
Yousvel said:
Is doze working?
Click to expand...
Click to collapse
Doze is baked into android 6.0 so yes it should be working
Sent from my MotoG3 using Tapatalk
CDMA virgin mobile connected almost immediately!
Only have 3g.
I've tried using root browser to move a file, and root access doesn't seem to work.
I've tried with the root option in dev options and also two different supersu versions.
I was trying to replace my apns_config and it would just fail.
I also had the play services fc using open gapps and slim gapps.
I will try banks gapps later.
Big thanks to you Alberto!
hossman said:
CDMA virgin mobile connected almost immediately!
Only have 3g.
I've tried using root browser to move a file, and root access doesn't seem to work.
I've tried with the root option in dev options and also two different supersu versions.
I was trying to replace my apns_config and it would just fail.
I also had the play services fc using open gapps and slim gapps.
I will try banks gapps later.
Big thanks to you Alberto!
Click to expand...
Click to collapse
Gonna try a few super su also as I've noticed this. Only minor so far so good!
This is what busybox is saying, sorry for another post it wouldn't let me add in the photo.
hossman said:
CDMA virgin mobile connected almost immediately!
Only have 3g.
I've tried using root browser to move a file, and root access doesn't seem to work.
I've tried with the root option in dev options and also two different supersu versions.
I was trying to replace my apns_config and it would just fail.
I also had the play services fc using open gapps and slim gapps.
I will try banks gapps later.
Big thanks to you Alberto!
Click to expand...
Click to collapse
Have you tried slim gapps zero? It should work as it woks for me on another device.
was waiting for ur release only ?
hossman said:
CDMA virgin mobile connected almost immediately!
Only have 3g.
I've tried using root browser to move a file, and root access doesn't seem to work.
I've tried with the root option in dev options and also two different supersu versions.
I was trying to replace my apns_config and it would just fail.
I also had the play services fc using open gapps and slim gapps.
I will try banks gapps later.
Big thanks to you Alberto!
Click to expand...
Click to collapse
Turn on all permissions in play services app and the force closes will stop.
Sent from my MotoG3 using Tapatalk
Will dual sim version work?
Sent from my MotoG3 using Tapatalk
ifu said:
Will dual sim version work?
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Heres your answer
Alberto97 said:
Not Working/Bugs
Some CM functions may be broken
MSIM (probably)
GPS couldn't work very well (Google Play Services Location Provider disabled to avoid persistent crashes)
Graphic bug on top right corner in landscape mode
Permissive SELinux
BTW dual sim not working means??
Single sim working perfectly or sim not detected at all like caf??
Click to expand...
Click to collapse
christopherrrg said:
This is what busybox is saying, sorry for another post it wouldn't let me add in the photo.
Click to expand...
Click to collapse
Android M forces the system to be mounted as read-only, you could try remounting using ADB with:
adb root
adb shell mount -o rw,remount /
Can someone test dual Sim?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Moto Mods are not supported
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.2 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Working
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Video Playback
LED Notifications
NFC
Not Working/Bugs
-
Installation
Make sure you have a nougat bootloader and modem else TWRP denies the installation by throwing a message about the wrong bootloader. Further details and a guide to upgrade what you need without losing data here.
Requires Unlocked Bootloader & a custom recovery
Place ROM & Gapps in your virtual SD
Reboot in Bootloader Mode
Go to "Recovery" (Vol +/Vol -) and confirm (power)
Wipe Data/Factory Reset
Wipe Dalvik cache
Install the ROM zip
Install su for root (get it here, you have to enable it from developer settings) [optional]
DO NOT REBOOT
Install the Gapps zip
Reboot
Downloads
download.lineageos.org/addison
AndroidFileHost
Sources
Device Tree
Kernel
XDA:DevDB Information
LineageOS 14.1, ROM for the Moto Z Play
Contributors
Alberto97
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2016-11-07
Last Updated 2017-10-08
Device Specific Changelog
02/04/2017
Switched back to Snap Camera
Now Moto Camera camcorder is fully working
Fixed call recording
25/03/2017
Switched back to QCamera2 HAL
3.18.48 kernel
Fixed some background, probably irrelevant, kernel crashes
16/03/2017
24 bit playback through headphones fixed
Switched to XML audio policy
Added back "comfort" (astronomy/night mode) color profile
09/03/2017
March Security patches
Reverted a patch that caused frequent high latency of wifi packets
25/02/2017
February Security patches
Enforcing SELinux
Switched to the fully working Snap Camera
Improved stability
Updated Adreno blobs
aptX support? (not tested)
18/02/2017
Camera is now working, more or less
SELinux is almost ready
Now using Nougat blobs (thanks a lot @felipevsw for his efforts)
18/01/2017
January security patches
QCOM Color Modes Support
Vulkan support
Fixed GLONASS (Satellites fixing time seems slower though)
Wlan drivers update
CyanogenMod Releases:
24/12/2016
Many CVE(s) have been fixed (kernel side)
Wlan drivers update (should improve the stability with Android 7.1.1 releases)
10/12/2016
Android 7.1.1 and December Security Patches
Switched back to 3.18.24 kernel
Blobs updated to the latest Marshmallow release (MPNS24.104-44-7)
03/12/2016
Fixed Fingerprint sensor
Kernel upgraded to v3.18.45 (just a test, I'll probably switch back to the previous one)
19/11/2016
Introduced the ability of using fingerprint sensor as Home Button (available under Settings -> Gestures)
LiveDisplay has been implemented (kernel side)
Added qcom IPA (Internet Protocol Accelerator)
All the kernel side Android security patches have been merged
Removed some camera hacks
Ramdisk cleanup
07/11/2016
Initial release
I think I love you. Thanks for the hard work.
For those are wondering, yes I've built the CM13 too but I have a weird and annoying bug there. For some reason Google's Location Provider causes random memory corruptions which lead to many random reboots when you're connected to a wifi network. Without a WiFi connection presence the device bootloops endlessly (we actually had a similar issue with moto msm8916 family but the problem was explicit there, here it's not). Nougat isn't affected by this bug, so that's why I'm directly publishing CM14.1 and skipping CM13
I think i love you too, very very thanks for the hard work :laugh:
Does this work for the dual sim model? ("retla release channel")?
Skipped right over 6.0 and 7.0 and right to 7.1, Heh. My moto x pure isnt even on 7.1 yet. Awesome work!
What about encryption, does CM 14.1 Will encrypt when I set up the fingerprint scanner? Because I don't want encryption in my phone, I want to get the most of the SD625. Thanks.
Uclydde said:
Does this work for the dual sim model? ("retla release channel")?
Click to expand...
Click to collapse
This is actually tested only on my dual sim device and it works fine
MuyKurioso said:
What about encryption, does CM 14.1 Will encrypt when I set up the fingerprint scanner? Because I don't want encryption in my phone, I want to get the most of the SD625. Thanks.
Click to expand...
Click to collapse
No, I've disabled forced encryption on cm but you have to erase userdata through fastboot to get rid of encryption. Wipe data from TWRP isn't enough.
Alberto97 said:
This is actually tested only on my dual sim device and it works fine
No, I've disabled forced encryption on cm but you have to erase userdata through fastboot to get rid of encryption. Wipe data from TWRP isn't enough.
Click to expand...
Click to collapse
Thanks for the reply. Do we need source code from Nougat to get camera working?
Thanks! I'll test it as soon as I get home.
MuyKurioso said:
Thanks for the reply. Do we need source code from Nougat to get camera working?
Click to expand...
Click to collapse
Camera stack is closed source on most of devices, motos included. On Nougat Google has done a lot of changes to the camera sources, so our prebuilt files find a new "unknown evnironment" while they expect the Marshmallow one.
There currently are some workarounds for this but nothing changes on this device; probably because of some changes made in our stack for the hasselblad camera module.
Do you think it will be possible to get moto mods working on custom roms? Is it something like the camera where we just need the blobs for 7.0 and integrate them into the kernel and all that or would it be a complicated mess to get them working at all?
Perhaps I'll be flashing this, how stable is it beside the camera and torch bugs? Are you using it as your daily driver?
Also, what gapps should I download? 64bit?
Hey bro, and Moto G 2015? ?
@Alberto97
MuyKurioso said:
Perhaps I'll be flashing this, how stable is it beside the camera and torch bugs? Are you using it as your daily driver?
Also, what gapps should I download? 64bit?
Click to expand...
Click to collapse
The Snapdragon 625 that's in our devices is 32-bit, so you wouldn't use the 64-bit GApps.
Uclydde said:
The Snapdragon 625 that's in our devices is 32-bit, so you wouldn't use the 64-bit GApps.
Click to expand...
Click to collapse
Im pretty sure our snapdragon 625 is not 32-bit, it is definitely built on aarch64. I think they just built the stock rom for armv7 or aarch32 which our processor is still compatible with. Probably because there isnt much of a reason to compile for aarch64. Taking a guess, I would think that this rom is 32-bit as well because the kernel source for our device would be based off of stock, I can easily be wrong about this though.
This is for Build Number MPN24.104-44 ? Indian Dual Sim.
Thank u so much man for working on this rom. Was regularly checking everyday for any Nougat rom and saw this. Very Happy. But I use my camera a lot so can't flash it right now. Hope the bugs get resolved pretty soon. Thanks for the rom again
mijing said:
This is for Build Number MPN24.104-44 ? Indian Dual Sim.
Click to expand...
Click to collapse
It doesn't matter.
---------- Post added at 01:39 AM ---------- Previous post was at 12:55 AM ----------
I tested it and everything works (except for the camera for reasons already stated). In order for me to get a similar experience to Moto Display I found this app and it works almost as good on CM.
https://play.google.com/store/apps/details?id=com.compass.ambiturner
The only bad thing is that you have to purchase Pro to get Wave to Wake, but it is worth it in my opinion.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* [U]YOUR WARRANTY IS NOW VOID.[/U]
*
* I'm not responsible for bricked devices, dead SD cards,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM.
* Before flashing it! YOU are choosing to make these modifications.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Whats working:
Booting
RIL/Data Connection
FM Radio
Audio
Bluetooth
Call
Camera
Video Recording
Mobile Hotspot
USB Theter
Power Menu customisations
Reboot Menu
Live Display (almost all of it)
In call volume slider
battery custumizations fixed
GPS (Locked but Not Acuurate)
What's not working or general bugs:
Flashlight (TORCH) use Fix Torch on from @mshoaib7
etc
You tell me, please
Flashing InstructionsMake sure you are on stock lollipop or a lollipop/marshmallow based custom rom
Wipe system/data/cache/dalvik cache
Flash the rom
Reboot
And then back to CWM/TWRP
Flash Gapps
Reboot
Download
[url]https://www.androidfilehost.com/?w=files&flid=134835[/URL]
Sources:
Temporary Device Tree
Credits:
Whole CM Team
@ketut.kumajaya, @Flour Mo, @dev_harsh1998, @mshoaib7
Big Thanks to :
@arvinquilao
XDA:DevDB Information
CyanogenMod 14.1, ROM for the Lenovo A6000
Contributors
bugerxXx
Source Code: [url]https://github.com/CyanogenMod[/URL]
ROM OS Version: 7.1.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod 14.1
Version Information
Status: ALPHA
Release Date: 2016-12-07
Screen Shoot
https://drive.google.com/open?id=0B5Ak9_gpwpQBNzlqVW5objhVZ28
Ported or source build?
64x or 32x
You mentioned the android vers was 7.1 but in the screencapture showing 7.1.1??
Next, i think u have to fix the videorec like others 7.1 rom. Also RIL bug (this is the main bugs :v)
aravindmj said:
Ported or source build?
64x or 32x
Click to expand...
Click to collapse
Build from source, this is 32bit
GuestStar said:
You mentioned the android vers was 7.1 but in the screencapture showing 7.1.1??
Next, i think u have to fix the videorec like others 7.1 rom. Also RIL bug (this is the main bugs :v)
Click to expand...
Click to collapse
Hahaha yeah sorry for that, edited now :3 maybe next update or more next :3 try to fix the RIL.
bugerxXx said:
Hahaha yeah sorry for that, edited now :3 maybe next update or more next :3 try to fix the RIL.
Click to expand...
Click to collapse
If u say I can upload build 2
I have fixed ril and GPS
The Hard Gamer said:
If u say I can upload build 2
I have fixed ril and GPS
Click to expand...
Click to collapse
Yes you can
After flashing Arm 7.1 pico GApps there is no playstore ... How to get Google playstore??
zishukkc said:
After flashing Arm 7.1 pico GApps there is no playstore ... How to get Google playstore??
Click to expand...
Click to collapse
Use latest gapps dude
bugerxXx said:
Code:
/*
* [U]YOUR WARRANTY IS NOW VOID.[/U]
*
* I'm not responsible for bricked devices, dead SD cards,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM.
* Before flashing it! YOU are choosing to make these modifications.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Whats working:
Booting
Audio
Bluetooth
Call
Camera
Power Menu customisations
Reboot Menu
Live Display (almost all of it)
In call volume slider
battery custumizations fixed
mobile hotspot
What's not working or general bugs:
RIL
Video Recording
GPS
etc
You tell me, please
Flashing InstructionsMake sure you are on stock lollipop or a lollipop/marshmallow based custom rom
Wipe system/data/cache/dalvik cache
Flash the rom
Reboot
And then back to CWM/TWRP
Flash Gapps
Reboot
Download
[url]https://drive.google.com/open?id=0B5Ak9_gpwpQBSldQZXdZb1RuSkk[/URL]
Sources:
Temporary Device Tree
Credits:
Big Thanks to :
@arvinquilao
Whole CM Team
@ketut.kumajaya, @Flour Mo, @dev_harsh1998
XDA:DevDB Information
CyanogenMod 14.1, ROM for the Lenovo A6000
Contributors
bugerxXx
Source Code: [url]https://github.com/CyanogenMod[/URL]
ROM OS Version: 7.1.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod 14.1
Version Information
Status: ALPHA
Release Date: 2016-12-07
Click to expand...
Click to collapse
this rom is volte?means ims tree enabled
bugerxXx said:
Use latest gapps dude
Click to expand...
Click to collapse
bro ril is fixed now ??
MR.HACKER5476 said:
this rom is volte?means ims tree enabled
Click to expand...
Click to collapse
I don't know, my internet provider isn't support volte for now, yeah try to compiled to enabled ims
Apoorv_def19 said:
bro ril is fixed now ??
Click to expand...
Click to collapse
Not fixed for now
bugerxXx said:
Use latest gapps dude
Click to expand...
Click to collapse
Yes dude I downloaded the latest Gapps an hour ago ... I can find Play services, package installer etc in apps list.... But no Play store
zishukkc said:
Yes dude I downloaded the latest Gapps an hour ago ... I can find Play services, package installer etc.... But no Play store
Click to expand...
Click to collapse
Try to used another gapps mean BankDynamic or etc
bugerxXx said:
Try to used another gapps mean BankDynamic or etc
Click to expand...
Click to collapse
OK .... But now I changed the ROM due to RIL bug ... Will flash again as soon as u fix that bug..... BTW the ROM was very much smooth and responsive , good job
zishukkc said:
OK .... But now I changed the ROM due to RIL bug ... Will flash again as soon as u fix that bug..... BTW the ROM was very much smooth and responsive , good job
Click to expand...
Click to collapse
Yeah dude
Woow another dev what a great news thanks keep up with good work
dude anyone checked that this rom is volte or not?reply back guys its volte or not?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix P
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
ROM Download
Fast Charging Fix Magisk
GApps
Resurrection Remix Source
Device Source
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
XDA:DevDB Information
OFFICIAL RESURRECTION REMIX, ROM for the Asus Zenfone Max Pro M2
Contributors
ROMFACTORY
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Stable Release Date: 2019-04-19
Created 2019-04-19
Last Updated 2019-07-30
Screenshots
2019-04-19
Initial build
2019-04-20
Changed Kernel to Etherious Kernel
Updated Vendor Security Patch Level to 2019-01-05
Added Zen Parts
Enabled touch optimizations
Added Gcam & Removed Stock Cam
2019-04-28
Fixed Gcam not installed by default
Added support for dirac
Enabled Wi-Fi MAC randomization
Enabled smart clock
Improved padding on keyguard
Fixed signal strength visual bug
Enabled spectrum support
Rewriten spectrum values
Added MTweaks
Address spectrum profiles denials
Set NFC chip
Improved padding on statusbar as well as lockscreen
Uprev clang version to 9.0.2
Make brightness ramp rates multiples of 60.
Disable sched autogroup
Set rlimit memlock to 64MB
Use MIUI poweroff charging animation
Enabled Boost Franework
Fixed Charging LED
Use Pixel 2 Xl Build Fingerprint
2019-07-13
Revised the sources to arrow team sources
Below is the changelog of arrow source
A lot of things are updated and reworked, things are much refined.
Updated to latest pie blobs.
Improved Camera and fixed GCAM on pie firmware and pie blobs.
Removed jason/Mi Note 3's build fingerprint and desc to pass safetynet, and switched to asus's latest ones - fixed safetynet (remember to pass CTS, just normally install Magisk and it will pass - no need to use any hax or change build fingerprint).
From this build minimal pie firmware based is forced to May Build, so you should atleast have that pie firmware base if you don't get it from
2019-07-29
All the changes are based on https://github.com/X01BD
Add framework manifest
Don't compile with Clang
cleanup few blobs
sepolicyAddress time_daemon denials
Build separate system and vendor hidl lib
manifestdownrev android.hardware.drm to 1.0
m2pro_defconfig -> _defconfig
Revert "uprev vendor.display.config to 1.2
vendor_propremove unwanted prop
Reduce media volume steps to 25
Add missing vendor prefix to qcom-post-boot & power_off_alarm
Update kernel path
Remove time_daemon from init.target.rc
Fixup audio config for source built audio
enable AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE
Don't set specific kernel arch
build few more audio packages
remove prebuilt audio.primary.sdm660
set TARGET_KERNEL_CLANG_COMPILE
Add 2 more notification icons
Enable Wi-Fi MAC randomization
init.qcom/targetadd vendor prefix to services in vendor
Move time_daemon from late_start to main
add few display props from CAF
update ims symlink
ipacmFix memory leaks
increase the maximum size for socket receive buffer
overlayincrease the minimum brightness
Update proprietary-files.txt to recent changes
Nice bro
Cool ... Is it based on Arrow DT ? What about the kernel ?
Tyakrish said:
Cool ... Is it based on Arrow DT ? What about the kernel ?
Click to expand...
Click to collapse
For now it used Arrow Kernel.
Tyakrish said:
Cool ... Is it based on Arrow DT ? What about the kernel ?
Click to expand...
Click to collapse
right now i am using arrow sources with few minor changes in future i will use cherry or any other kernel .
ROMFACTORY said:
right now i am using arrow sources with few minor changes in future i will use cherry or any other kernel .
Click to expand...
Click to collapse
You wrote "ROM OS Version: 2.3.x Gingerbread" on the OP.
mauam said:
You wrote "ROM OS Version: 2.3.x Gingerbread" on the OP.
Click to expand...
Click to collapse
it is clearly a mistake
ROMFACTORY said:
it is clearly a mistake
Click to expand...
Click to collapse
Yep, they happen. Anyway, thank you very much to bring rr officially to our device
ROMFACTORY said:
right now i am using arrow sources with few minor changes in future i will use cherry or any other kernel .
Click to expand...
Click to collapse
I am waiting for cherry kernel with rr rom. I dont like arrow kernel. Hope to test the rom soon with cherry kernel or another kernel. Thanks.
Wait for official RR comes to an end!!:angel:
wait for another kernel in this rom
updated on 2019-04-20
Will camera2 api get enabled when i flash this ROM?
kanwaljeetsm said:
Will camera2 api get enabled when i flash this ROM?
Click to expand...
Click to collapse
yea
ROMFACTORY said:
yea
Click to expand...
Click to collapse
GCAM working with this ROM? every roms have some issues with GCAM
Front camera working on gcam v6.1 and above?
Charging led not working. Any solution?
According to the changelog, Google cam is added. But I'm not seeing it in my phone. Only has stock camera. Any advice?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Bugs :
You tell me
Instructions :
Download the latest build
Reboot to recovery
Flash the latest build
Reboot
Downloads :
Official TWRP : Official TWRP
ROM : LineageOS OFFICIAL
OpenGapps : Opengapps
Notes :
Only clean installation please
Bug Report without logs means nothing
No stable gapps package is available as of now for Android 10
Encryption works and it's forced as FBE. This means you need to format your /data partition if you are unencrypted or encrypted with FDE, right before booting into the ROM.
SafetyNet doesn't pass as of now (Blame Google for that) and I'm not going to include any hack to make it pass
Magisk works but no support for it is officially provided
Reporting Bugs :
DO NOT Report bugs if you installed Xposed or weird magisk modules
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Sources :
Device tree (sdm660-common): https://github.com/LineageOS/android_device_xiaomi_sdm660-common
Device tree (twolip): https://github.com/LineageOS/android_device_xiaomi_twolip
Kernel : https://github.com/LineageOS/android_kernel_xiaomi_sdm660
XDA:DevDB Information
LineageOS 17.1 for tulip, ROM for the Xiaomi Redmi Note 6 Pro
Contributors
DD3Boh, erfanoabdi, arytonex
Source Code: [url]https://github.com/LineageOS[/URL]
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Created 2019-09-14
Last Updated 2020-01-04
lineage-17.0-20190914-UNOFFICIAL-tulip
Initial release
lineage-17.0-20190915-UNOFFICIAL-tulip
Fixed device not booting on the very first boot. Yet the first boot might have some issues, if it does just force a reboot to fix
lineage-17.0-20190923-UNOFFICIAL-twolip
Fixed calling audio
Fixed bluetooth audio
Fixed DRM (together with Chrome frequent crashes)
Fixed thermal crashing
Fixed goodix fingerprint support
Fixed VoLTE
Fixed hotspot
Fixed SDcard
Added f2fs support
Kernel rebased on the latest Q CAF tag for sdm660
Kernel built with clang 9.0.3 as expected in Q
Device renaming from tulip to twolip, details here
lineage-17.0-20191126-UNOFFICIAL-twolip
The changes in between the two builds are way too many to list them all, but let's try to sum things up a little bit.
5ghz hotspot fixed
Kernel rebased on the latest CAF tag with qcacld update too (LA.UM.8.2.r1-04800-sdm660.0)
Blobs updated with CAF Q blobs
Radio blobs updated to the very latest Pie caf tag
WiFi display fixed
Manual network provisioning fixed
A lot of platform side updates with new features re-implemented
Added CarrierConfig for mobile network provider customized options
DRM fixed, so no more Chrome crashes
Fixed charging status not being correctly reported
Misc fixes (both device and platform side)
lineage-17.1-20200104-UNOFFICIAL-twolip
Clean flash is recommended, but if you don't want to do so gapps and magisk need to be reflashed
Encryption fixed
Selinux enforcing
FM radio fixed
Aptx fixed
Headphones without jack fixed
Headphones during call fixed
Kernel and qcacld updated to latest CAF tag (LA.UM.8.2.r1-05100-sdm660.0)
Lineage source update to 17.1 (rebased on aosp r18)
Lineage sources update with new features re-implemented
lineage-17.1-20200104-NIGHTLY-twolip
This is the first OFFICIAL build of LineageOS for twolip
The encryption method is now FBE so if you are currently encrypted with FDE or decrypted, you need to format /data
The only official supported recoveries are TWRP (latest build) and lineage recovery.
Reserved again
Do you plan on going official?
Great work developer
Awesome, great work!
Sent from my Redmi Note 6 Pro using XDA-Developers Legacy app
Levi4cyber said:
Do you plan on going official?
Click to expand...
Click to collapse
At the moment Lineage OS 17 is an unofficial rom [not created by the OG team that works on Lineage OS]. It will take a good couple months before we start seeing official devices with Lineage OS 17 from past experience.
---------- Post added at 03:24 PM ---------- Previous post was at 03:21 PM ----------
Thank you for taking the initiative to create a Android 10 rom for this device. It should help streamline the development of other android 10 roms for this device. Although it will still take quite a lot of time and effort to get this rom and future roms up to a stable build like any other new android release. Thanks once again.
thank you so much for supporting Tulip
lineage-17.0-20190915-UNOFFICIAL-tulip pushed right now.
Check the second post for download link and changelog
Enjoy
Gapps?
Multi resume feature of android 10 works? (with split screen)
Like this: https://www.xda-developers.com/android-q-splitscreen-multitasking-multi-resume/
But I want to know for games, like 2 games running at the same time, not one paused and the other one running.
Just flashed this rom yesterday, overall pretty good.
Hotspot didn't work for me, but the rest is working fine so far
Oh, since opengaaps still dont provide gaaps for 10, i tried Bitgaaps Q and a got a bootloop.
(Not a big deal, cuz this rom still on alpha stage)
But anyway, Thank you dev for bringing latest android on this device
Still doesn't boot up
Volte fix zip android 10, working in this rom? Try it anyone?
Sent from my Redmi Note 6 Pro using XDA-Developers Legacy app
Any fix for volte?
@tulipofficial telegram... Look here!
Sent from my Redmi Note 6 Pro using XDA-Developers Legacy app
Gapps for lineage 17 rom
Dear Dev, the rom fast and good begin.... Continue this job?
Sorry for bad English
Sent from my Redmi Note 6 Pro using XDA-Developers Legacy app
gdg6 said:
Gapps for lineage 17 rom
Click to expand...
Click to collapse
Try this
https://www.mediafire.com/file/ep8r79709jabycm/BiTGApps-arm64-10.0.0-v0.1_BETA4.zip/file
galileogarin said:
Try this
https://www.mediafire.com/file/ep8r79709jabycm/BiTGApps-arm64-10.0.0-v0.1_BETA4.zip/file
Click to expand...
Click to collapse
yeah, its works this gapps for me, thanks