Can't boot and Odin isn't letting me flash stock firmware - Galaxy S6 Q&A, Help & Troubleshooting

Basically I wanted to try the sac23 edge rom on my flat gs6, i noticed it was a 5.1.1 rom so i updated ota and then rooted and installed twrp for 5.1.1 then I went to install the sac 23 rom and then it just hasnt booted since, tried with a kernel too and even factory wipe didnt work, then i flashed another rom that is the xtresolite universal edition, everything usually works except mobile networks so i flashed that to try to get it to boot, still wont it just hangs at the samsung galaxy s6 logo then eventually turns off, the charging logo doesnt even go to charging just the charging symbol. After that i decided to flash stock firmware, doing so i realized that i wouldnt be able to use the 5.0.2 firmware which didnt work, so i downloaded the 5.1.1 firmware and i have two, one ends in of7 and one ends in 0e2, both have not worked and im getting worried, i bought this phone because i accidentally destroyed my s5. so i had to pay like full price for this phone and reallyyyy dont wanna buy another pleasseeee help
Thanks
Edit: I have a sm-g920p and flashed a sm-g925p rom because i heard you can do so with a kernel

Try this?
Boot into stock recovery and factory reset / data wipe.
On computer at www.sammobile.com download the correct stock rom for youre phone and flash it from Odin.

Related

So im assuming i just messed up myself here

I got this s6 back in march or april and it was on 5.0.2 and well now that iv've updated to the OTAS 5.1.1 OFE i was curious about root and i continued with a thread about rooting it and etc
( i kinda regret that now, i shouldve stayed on 5.0.2)
but the main reason i rooted was to recover files and welli did but i installed dr fone on my computer it asked for my phones root permissions so i went ahead and rooted it but after a bit i noticed it started to freeze my phone and after a bit it just stopped working.
i turn it on and restart it i see a blue led cycling and i see the sprint spark screen but it does nothing from there.
and so i stupidly went to to stock recovery, wiped cache, and factory resetting it and now idk what to do
there isnt an OFE stock tar yet so i cant fix this on my own, im just thinking if i flash twrp right now and then flash a custom rom will that work?? for my OFE build
am i able to or should i just download the stock tar 5.0.2 to reflash it or will that just basically brick me completely??
also i did have insurance for this and i thnink i just blew that one too :/
ive noticed mine said this
G920PVPU2BOFE
and not G920PVPU2BOF7
so does that mean im able to use the stock firmware from the website and reflash it or like what do i do...
SO what i did countless of researching
i ended up having the
custom binary blocked by FRP lock, by forgetting to unlock oem before updating the Twisted Projects SuperSu or User since it asked me to updated i ovbiously just went ahead of myself and that happened thus into this Boot Loop Soft
and im flashing with ODIN the stock 5.1.1 OF7 tar its surprisingly working. ( i was originally on the OFE OTA tho.)
unlike the Twisted Project custom roms, kernel and or twrp setup, i couldnt boot into the twrp or even past the android screen, and well the only option i had was just Download Mode.
And this basically saved me.
Very Informative

[Completed] Galaxy Note 3 SM-N9005- ROM/Root Help

So not being very experienced at Rooting/Flashing Roms this may come across strange.
Here is a little background to my problem.
I had a rooted Note 3 running KitKat before I decided to flash to Lolipop. I downloaded the Vodafone (UK) variant of the ROM from Sammobile not thinking anything of it at the time (As I am on Vodafone) I went through the usual procedure of going into download mode running Odin as admin and then connecting my phone, adding the Rom files to Odin and then Flashing. Flashing started fine as it got towards the end it Failed on Hidden(Something).
I panicked didn't know what to do so I unplugged my device and tried to reboot. It didn't. It said something along of the lines as there is a firmware error and got stuck on that screen. Panicked some more, decided I would try to google a fix. Came across one which required me to flash CWM Recovery onto my phone. I thought I would try it, Once it flashed which went fine I was told too try and boot straight into recovery mode once the phone starts and reboot through there. I took out my battery put it back in and then went ahead and tried to boot into recovery which worked. Once on CWM I went to reboot the phone As I hit yes too reboot It took me to another screen where it said I wasn't rooted and if I would like to reroot. I decided to click NO and restart the phone. It got stuck on a boot loop, I did a factory reset and cache wipe and it booted into life. (And working fine so far)
So here is where the problem is.
I am looking to get root back to the device. I think I have a locked boot loader as I installed the Vodafone variant of the 5.0 Rom. Would I be able to Flash the BTU Rom onto my device without bricking it, and after that would I be able to root Via CFAutoRoot which seems to be the easiest way to so. Or could I flash with CFAutoRoot Straight onto this ROM.
Info:
BTU ROM:
Date Country/Carrier Version PDA CSC
2015-07-01 United Kingdom 5.0 N9005XXUGBOF1 N9005BTUGBOD2
ROM I INSTALLED:
Date Country/Carrier Version PDA CSC
2015-06-01 United Kingdom (Vodafone) 5.0 N9005XXUGBOD6 N9005VFGGBOD2
Thanks for any help in advance.
Hi
Thanks for using XDA Assist
Looks like you already found your way to your help forum for your device
http://forum.xda-developers.com/galaxy-note-3/help/upgraded-kitkat-to-lollipop-help-rooting-t3208399
I'll close this thread now as others have already started helping you in your device forum.
Good luck and I hope you get root back

Help, 7.0 ROOT & TWRP

How do i root/install twrp my sprint s6 edge which is on nougat?
flash this with TWRP https://www.dropbox.com/s/yk71179z29zo87h/N920_Nougat_Root_SuperSU_No_kernel_included.zip?dl=0
i tried to flash twrp twice, my phone is now soft bricked. as soon as i boot it up, there is this flash and when i touch my phones screen, it vibrates. i dont know whats going on anymore. i will now try and flash stock firmare
*UPDATE*
i have successfully flashed the stock firmware and my phone is working. The loss of data is unfortunate, but as long as my beloved s6 edge is working, i dont mind. i think ill just wait until there is a proper way to root 7.0. until that time ill just use 6.01 i guess.
Thanks anyways
FullMetalSusano said:
*UPDATE*
i have successfully flashed the stock firmware and my phone is working. The loss of data is unfortunate, but as long as my beloved s6 edge is working, i dont mind. i think ill just wait until there is a proper way to root 7.0. until that time ill just use 6.01 i guess.
Thanks anyways
Click to expand...
Click to collapse
which stock firmware did u use
6.0.1, G925PVPU3CPB6 from sammobile.
then i got the ota and just updated to 7.0
now im going to re-flash 6.0.1 and then cf auto root. i cant stand my phone without root.
unless someone helps me flash twrp. so that i can flash that super su file with it.
i noticed something while browsing the twrp site, it says something like "This device uses dm-verity. This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab". now i this verity thing is my nightmare. before when i had rot, i forgot i had used cf and went to super su and remove root. next thing i know, my s6 is in a boot loop. And when i went to boot loader it showed a message saying dm verity failed. Can anyone guide me? To flashing that kernal that is
guys ive done it. rsktkr1 thanks. i was basically flashing the wrong twrp. I will leave the link to the correct twrp file just in case there is someone who went through the same hardships as me. https:// dl.twrp.me/zeroltespr/twrp-3.1.0-0-zeroltespr.img.tar. html just remove the spaces
Thanks guys. Sorry for all the trouble.
well i got my s6 edge back and running. I had it on mm 6.0 and rooted it once more just now i decided to go back to nougat. I have found that twrp 3.1.0 sent my edge into a bootloop and actually hard bricked my phone. I figured sine my s6 flat took root on nougat that since i used the n20p supersu nand 3.2.0 twrp ran flawless with just one problem which is battery life it dont very long. so if i were to try the note versionj of my edge it might work but for custom recovery stay with 3.2

Need help. Stock S7 hangs on Samungs boot logo. Tried recovery and Odin both fail

I have hear a S7 wich hangs on white samsung boot logo.
The device is stock, no root and no custom rom.
The problems started on a failed update, it started to hang during use.
I made a backup and then tried to reset it, sadly i came no further then this boot logo after it crashed again.
I decided to enter recovery mode, when entering recovery each time i get a blue install screen of an update and each times it fails with an error.
Then i did a wipe cache and rebooted, same result, it stops at boot logo
Then i did a wipe/format factory reset (from recovery) and reboot, here also it hangs on samsung logo
Also it reports the following:
fail to open recovery cause no such file or directory
I even let the phone boot for 8 hours on the logo, it gets really hot but it does not go pass the samsung boot logo
When booting and the phone is connected by USB to my laptop i get messages that android rom is prepared and 1 later it is installed, but that is it, no booting etc.
I then entered download mode and used ODIN, downloaded the latest stock rom and try to flash it.
But here also i get each try a FAILED on the boot, even when i do no enter BL i get a FAILED, so only AP it fails also.
I tried now about 5 different stock rom versions and they all fail.
Have really no idea how to fix this, as mentioned the phone is fully stock, so stock bootloader, stock rom etc.
Anyone any idea how to get this phone up and running again?
B3rt said:
I have hear a S7 wich hangs on white samsung boot logo.
The device is stock, no root and no custom rom.
The problems started on a failed update, it started to hang during use.
I made a backup and then tried to reset it, sadly i came no further then this boot logo after it crashed again.
I decided to enter recovery mode, when entering recovery each time i get a blue install screen of an update and each times it fails with an error.
Then i did a wipe cache and rebooted, same result, it stops at boot logo
Then i did a wipe/format factory reset (from recovery) and reboot, here also it hangs on samsung logo
Also it reports the following:
fail to open recovery cause no such file or directory
I even let the phone boot for 8 hours on the logo, it gets really hot but it does not go pass the samsung boot logo
When booting and the phone is connected by USB to my laptop i get messages that android rom is prepared and 1 later it is installed, but that is it, no booting etc.
I then entered download mode and used ODIN, downloaded the latest stock rom and try to flash it.
But here also i get each try a FAILED on the boot, even when i do no enter BL i get a FAILED, so only AP it fails also.
I tried now about 5 different stock rom versions and they all fail.
Have really no idea how to fix this, as mentioned the phone is fully stock, so stock bootloader, stock rom etc.
Anyone any idea how to get this phone up and running again?
Click to expand...
Click to collapse
What country are you in?
What network were you using?
What firmware was on your phone nougat or Oreo?
What firmware are you trying to flash?
What version of Odin are you using?
cooltt said:
What country are you in?
What network were you using?
What firmware was on your phone nougat or Oreo?
What firmware are you trying to flash?
What version of Odin are you using?
Click to expand...
Click to collapse
Living in The Netherlands
The phone is free, not network limited but was last used on T-Mobile
I am not 100% sure, i believe Android 8
i tried: DNL-G930FXXU3ESA3-20190131134911 and EUR-G930FXXS4ESAE-20190218105256 and DNL-G930FXXU2DRC1-20180402094302 and BTU-G930FXXU1DPLT-20170117160813 and G930FXXU1DQAN_G930FFTM1DQAD_FTM
Tried Odin3_v3.12.3 and Odin3-v3.13.1
B3rt said:
Living in The Netherlands
The phone is free, not network limited but was last used on T-Mobile
I am not 100% sure, i believe Android 8
i tried: DNL-G930FXXU3ESA3-20190131134911 and EUR-G930FXXS4ESAE-20190218105256 and DNL-G930FXXU2DRC1-20180402094302 and BTU-G930FXXU1DPLT-20170117160813 and G930FXXU1DQAN_G930FFTM1DQAD_FTM
Tried Odin3_v3.12.3 and Odin3-v3.13.1
Click to expand...
Click to collapse
Your trying to flash old versions of the firmware, once the boot loader is updated you can't go back.
This is the latest version of T Mobile for the Netherlands (TNL), it's always best to try the firmware you were on first [url]https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/TNL/download/G930FXXU3ESA3/255865/[/URL]
If that doesn't work this is the latest version of Unbranded BTU [url]https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/BTU/download/G930FXXS4ESAE/257466/[/URL]
Also use Odin 13. Put all files in correct slots and use CSC not HOME_CSC
As far as i could see these are all android 8 and 1 android 7 firmwares, so they are not that old.
Believe the latest one is from January this year, i know the last time the phone was updated was last October, after that all updates failed to install OTA
The link you gave me is exactly the same version i used only without the branding, so i already used the latest one.
I tried to be sure the download from the link you given but with those download speeds (15kb) it is almost impossible to download these firmware's, i am not gonna take a subscription to for 1 time fast downloading and also i do not want to risk that i paid for a fast download it fails again....
So if someone has a download link which i can use and try an other firmware please feel free to share it.
BTW i used the last Odin3-v3.13.1 version, i cannot find a newer one.
B3rt said:
As far as i could see these are all android 8 and 1 android 7 firmwares, so they are not that old.
Believe the latest one is from January this year, i know the last time the phone was updated was last October, after that all updates failed to install OTA
The link you gave me is exactly the same version i used only without the branding, so i already used the latest one.
I tried to be sure the download from the link you given but with those download speeds (15kb) it is almost impossible to download these firmware's, i am not gonna take a subscription to for 1 time fast downloading and also i do not want to risk that i paid for a fast download it fails again....
So if someone has a download link which i can use and try an other firmware please feel free to share it.
BTW i used the last Odin3-v3.13.1 version, i cannot find a newer one.
Click to expand...
Click to collapse
Ok well you can listen to me or not.
None of the firmwares you are using are for your device, PHN is Netherlands and the BTU you are using BTU-G930FXXU1DPLT is on a U1 boot loader, BTU is now on S4 which is 3 versions above U1.
The reason you only download from Sammobile or updato.com is because the firmware is correct, reliable and not full of virus/spyware. You can also download direct from Samsung severs with SamFirm Tool.

Bricked and trying to recover

SM-G930F
TWRP 3.62_9-0
Last Known ROM: [TeamExyKings][S7_S7Edge_G930_G935_F_FD][Pie_9.0][15-January-2020][Note_FE_Port][v20]LightROM
I'm trying to get my S7 to stock. I have no idea where it's going wrong. This all started when I went to get my phone off the charger and it looked like it took a hard crash. Im not sure why either. I can get into DOWNLOAD MODE, and I can reflash my TWRP with ODIN. Whenever I go to flash a ROM in TWRP, it freezes on install, and I have to hard reset it. Anyways, my end goal is to get my S7 back to stock. Thank you so much in advance.
I've managed to get a rom(LightROM) in.. but I am stuck on a BLUE LED and a Black Screen? Anyone got the possible solution to get back to a stock rom? I am actually having a hard time finding a stock rom as well.
RowtronX said:
SM-G930F
TWRP 3.62_9-0
Last Known ROM: [TeamExyKings][S7_S7Edge_G930_G935_F_FD][Pie_9.0][15-January-2020][Note_FE_Port][v20]LightROM
I'm trying to get my S7 to stock. I have no idea where it's going wrong. This all started when I went to get my phone off the charger and it looked like it took a hard crash. Im not sure why either. I can get into DOWNLOAD MODE, and I can reflash my TWRP with ODIN. Whenever I go to flash a ROM in TWRP, it freezes on install, and I have to hard reset it. Anyways, my end goal is to get my S7 back to stock. Thank you so much in advance.
I've managed to get a rom(LightROM) in.. but I am stuck on a BLUE LED and a Black Screen? Anyone got the possible solution to get back to a stock rom? I am actually having a hard time finding a stock rom as well.
Click to expand...
Click to collapse
Going back to stock is probably the best option, download the firmware from here selecting your country and carrier
Download Samsung Galaxy S7 SM-G930F firmware
Download the latest Samsung firmware for Galaxy S7 with model code SM-G930F. Check out our free download or super fast premium options.
www.sammobile.com
you will have two csc files the csc file wipes the phone whereas the home csc upgrades the software, you would use home if you had a working rom say Android 7 and wanted to upgrade to 8. You want to wipe the phone.
Not_Rich said:
Going back to stock is probably the best option, download the firmware from here selecting your country and carrier
Download Samsung Galaxy S7 SM-G930F firmware
Download the latest Samsung firmware for Galaxy S7 with model code SM-G930F. Check out our free download or super fast premium options.
www.sammobile.com
you will have two csc files the csc file wipes the phone whereas the home csc upgrades the software, you would use home if you had a working rom say Android 7 and wanted to upgrade to 8. You want to wipe the phone.
Click to expand...
Click to collapse
well i went in TWRP and formatted/wiped everything. Would i still need a rom? I feel like something is mad corrupted. Maybe a Kernel? I haven't been successful of flash a room or getting into the OS yet. I just need to get into the phone and have it turn on.

Categories

Resources