Database Info

[Help] Bricked my Nexus what's next? :(

Hi, this situation is kind of strange and I hope it's just the battery and not the whole goddamn phone.
What I'm dealing with at the moment is:
The phone doesn't boot
When plugged onto charger or USB cable it boots but stuck at Google logo after a blink and stays there. Also, Home, Back and other buttons are lighten.
When "forcefully" put into fastboot mode, e.g. after plugging it onto USB and instantly pressing Vol Up + Power it stuck there as well, volume rocker no more response neither does the power button. Also, I notice there are no commands at the end like "USB int" etc we see normally.
Fastboot or ADB returns no device found
Please help. I personally believe it could be due to battery, what do you guys think?
Thank you.

As long as you can see the google logo, your device is not bricked. GIve more useful information; like your computer operating system, the last thing you did before this happened, etc.

ej8989 said:
As long as you can see the google logo, your device is not bricked. GIve more useful information; like your computer operating system, the last thing you did before this happened, etc.
Click to expand...
Click to collapse
Thanks. My OS is Windows 8.1 Update 1. The last thing was to install UPDATE-SuperSU to root so that I can install ROM Manager to update Recovery but the installation was aborted so I attempt to flash it via Fastboot with success. Then, wanted to install SlimKat but it couldn't let me mount USB storage so that I can put the .zip file. I, then stupidly click on install via ADB but didn't know how to go back so I pulled the battery and powered up; used ADP push command to transfer said the file, but again for some reason I had to pull the battery and since then I am in above position.
Sent from my XT1032 using Tapatalk

Put the device in bootloader and plug it into the computer, be patient, my phone is rather slow to get detected sometimes.. (Up to 30 min.) Check your drivers on the computer, try rebooting the boot loader from just pressing the power button (while in boot loader mode)..
If all else fails, read up on Wugs NRTK page and about ODIN...
Sent from my Nexus S using XDA Premium 4 mobile app

Setting.Out said:
Put the device in bootloader and plug it into the computer, be patient, my phone is rather slow to get detected sometimes.. (Up to 30 min.) Check your drivers on the computer, try rebooting the boot loader from just pressing the power button (while in boot loader mode)..
If all else fails, read up on Wugs NRTK page and about ODIN...
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, device doesn't go into bootloader without plugging it to computer (I've to press required buttons BEFORE plugging OTG cable). And when it boots in fastboot mode it doesn't let me press any button either. I kept it plugged in for sometime as well when it when it was at Google logo; will try to do the same while in fastboot mode too and let you know. As for drivers, same computer was used before when it was working and it detected just fine immediately (gave me a pain to find the right drivers though - PDANet was a life saver).
EDIT:
I should mention that I broke the OS before this happened by formatting /system folder and wiping other data from CWM recovery - I think, I also rebooted it without flashing the ROM as well.

BaghiXDA said:
Hi, device doesn't go into bootloader without plugging it to computer (I've to press required buttons BEFORE plugging OTG cable). And when it boots in fastboot mode it doesn't let me press any button either. I kept it plugged in for sometime as well when it when it was at Google logo; will try to do the same while in fastboot mode too and let you know. As for drivers, same computer was used before when it was working and it detected just fine immediately (gave me a pain to find the right drivers though - PDANet was a life saver).
EDIT:
I should mention that I broke the OS before this happened by formatting /system folder and wiping other data from CWM recovery - I think, I also rebooted it without flashing the ROM as well.
Click to expand...
Click to collapse
I recently had to update my drivers on my computer.. after it did an update, my phone wasn't recognized..
Try Wugs Nexus Root Toolkit,.. use the options for "bricked".. do this from the bootloader screen (power/volume +)...
I don't have experience with ODIN, so you'll need to read that forum/threads...

Setting.Out said:
I recently had to update my drivers on my computer.. after it did an update, my phone wasn't recognized..
Try Wugs Nexus Root Toolkit,.. use the options for "bricked".. do this from the bootloader screen (power/volume +)...
I don't have experience with ODIN, so you'll need to read that forum/threads...
Click to expand...
Click to collapse
The problem is, even the Toolkit doesn't recognize the device no matter what. Even the keys for ODIN don't work, aren't they Home+VOL+ and Power?
EDIT1:
Kept plugged in for little longer as suggested but it heats up (it's too hot here) so I plugged out. Going to be running it off of Linux and lets see how it goes. :fingers-crossed:
EDIT2:
Tried Adam's UnBrickable method on Linux and even that couldn't find device. But that was to be expected since Adam clearly mentioned in his post that this tool isn't for those who see anything on their screen.

Whelp! Currently I can only see I:\ drive in device manager and that's all under portable devices and that's all. I see the same even in BIOS boot options, it's listed as "Google".

Guess need to close this thread now.

Problems with my d6633 Z3 Dual

Hallo people,
I have a very big problem with my d6633. I installed tonight TWRP - so fas, so good. After installing TWRP asked me to root the device, I said YES. My bootloader was unlocked. Then I couldn't exit TWRP. After every reboot the device started into TWRP. Now I can not start the device. I tried with Power+ Volume+, reset button - nothing.
Any suggestions?
Thanks for your help.

mazagi said:
Hallo people,
I have a very big problem with my d6633. I installed tonight TWRP - so fas, so good. After installing TWRP asked me to root the device, I said YES. My bootloader was unlocked. Then I couldn't exit TWRP. After every reboot the device started into TWRP. Now I can not start the device. I tried with Power+ Volume+, reset button - nothing.
Any suggestions?
Thanks for your help.
Click to expand...
Click to collapse
Use flashtool go back stock, after flash twrp, flash supersu manually, don't let twrp install for you

yuzhengwen said:
Use flashtool go back stock, after flash twrp, flash supersu manually, don't let twrp install for you
Click to expand...
Click to collapse
How can I do that? There is no power on my device. And I think I cannot charge it...

mazagi said:
How can I do that? There is no power on my device. And I think I cannot charge it...
Click to expand...
Click to collapse
Google using flashtool to flash stock firmware

yuzhengwen said:
Google using flashtool to flash stock firmware
Click to expand...
Click to collapse
No chance. The device will not be detected. I can not charge it.

mazagi said:
No chance. The device will not be detected. I can not charge it.
Click to expand...
Click to collapse
How much % did it have before you started the procedure?
Did you try holding down vol+ and then plugging it into USB?

Hello Jkay7,
Thanks for your support. My solution was to leave the device switched off over the night. Connected via original cable. Today in the morning my dyouzhengwen evice was detected via flash tool and as youzhengwen suggested I could flash the original ftf file.

artusk01 said:
Hello Jkay7,
Thanks for your support. My solution was to leave the device switched off over the night. Connected via original cable. Today in the morning my dyouzhengwen evice was detected via flash tool and as youzhengwen suggested I could flash the original ftf file.
Click to expand...
Click to collapse
Nice to hear that!

Any help would be appreciated
Sony Xperia Z3 Dual D6633
I have tried just about every method seen. My problem with the flashtool or PC companion is that the phone is recognized by the computer but I can only start to turn the device on which I don't believe it actually boots. Broken display and new display does not power on.
Or it connects in fastboot by holding volume up when connecting. This shows a blue led.
But trying to connect in flash mode by holding power down just makes the led flash red then green continuously.
And for the pc companion it always says the connection was unsuccessful once the led turns green on the device.
I got the phone for only $40 in this condition. So I cannot say what entirely was wrong or what it's last working state was.
I bought a new screen and power flex cable. As well as a back plate and tempered glass protectors. I was going to wait until everything works perfect speakers and all before I sealed it tight with water proof adhesive stickers.
Even before I bought the new power flex the computer recognized it and the battery health and charge %. The battery was able to charge. But I couldn't turn the device on.
The computer confirmed that it had been at 29% after some time charging and then 100% after leaving it on charge.
Now with the new screen and power cable the phone still does nothing if not plugged it. The light was red at first, but then yellow, then after some time green when the battery fully charged. This was again even before the new parts.
I have to plug it in to try anything.
It goes red then starts to turn on and turns green.
But I hear no sound, get no vibrations, the computer only sees it as the phone and shows absolutely nothing on the removable disk. Just blank when I click on the drive volume. But it is seen as an Xperia D6633 phone or fastboot Android device.
I've tried the reset button, holding power and volume up, volume down, all three. Tried my factory cable. Different cables, different ports, uninstalling it from service manager and letting the flash tool recognize and install it.
I also tried the new display on the old power flex and the old display on the new power flex.
Nothing changed, no vibrations, no sounds, system never actually fully starts as far as I can tell, and cannot connect in flash mode only fast boot. And the flashable file is only seen in flash mode. Fastboot can only see the folder but it is ready to flash files as far as I can tell.

@xdathekilljoy
That's a lot of money you're putting into an (apparently) broken phone Brave!
Okay so what happens if you hold Vol+ while it's shut down and then connect it to USB, the LED turns blue, right?
So why does flashing it from there on not work?

Jkay7 said:
@xdathekilljoy
That's a lot of money you're putting into an (apparently) broken phone Brave!
Okay so what happens if you hold Vol+ while it's shut down and then connect it to USB, the LED turns blue, right?
So why does flashing it from there on not work?
Click to expand...
Click to collapse
Well it didn't seem that broken at first and both it and the display were only about 37 piece. Power flex was almost 10. Seemed like a rightful price.
Yes the led turns blue and it is in fastboot mode. The flash file seems to only be readable for flashing in flash mode "volume down". I can see the folder of the flash file in fastboot mode " volume up ", but not in a flashable format.
And when connecting " volume down " it fails a connection while the led just flashes green to red to green to red continually

Two updates
1. I thought I should mention that when I do plug the phone in to a charger or computer the top does get a bit warm or hot as well as the led turns on. Different color depending.
2. With much fiddling and trying if holding the volume down button for different lengths of time while connecting up a computer I finally got it to connect in flash mode and flashed a file...... No change.
At this point maybe I should try a new battery for the hell of it even though this one seems to be working.
Or there is a minute hardware damage somewhere. Maybe the power ic? Or s capacitor?

Hard Bricked OnePlus (no USB found)

Hy!
First of all sorry for my bad english i am from Austria
I think i hard brickd my OpO. I formated in TWRP and now i only see the the 1+ logo on start up. and thats it no fastboot, no USB in windows nothing.
I also can charge it an i see the charge logo
I tried Volume up and down with and without the usb cable but nothig happends
any ideas?

Have tried QPST flashing?
Sent from my ZUK Z1 using Tapatalk
---------- Post added at 12:07 PM ---------- Previous post was at 11:20 AM ----------
pirni said:
Hy!
First of all sorry for my bad english i am from Austria
I think i hard brickd my OpO. I formated in TWRP and now i only see the the 1+ logo on start up. and thats it no fastboot, no USB in windows nothing.
I also can charge it an i see the charge logo
I tried Volume up and down with and without the usb cable but nothig happends
any ideas?
Click to expand...
Click to collapse
try this worked with me before
http://forum.xda-developers.com/oneplus-one/general/qualcomm-msm8974-download-tool-oneplus-t3255434

Thanks for the Answer but i cant use a tool because my computer dont find a USB device :crying:

pirni said:
Thanks for the Answer but i cant use a tool because my computer dont find a USB device :crying:
Click to expand...
Click to collapse
try holding power+vol down for 30 minutes and check if your pc Identify OPO or not .
i had this issue when i tried to downgrade from Cyanogen 12 to Cyanogen 11 .

http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Follow that. I've bricked my phone several times. It's all there. If it's not working, read the post again.

ama_211 said:
try holding power+vol down for 30 minutes and check if your pc Identify OPO or not .
i had this issue when i tried to downgrade from Cyanogen 12 to Cyanogen 11 .
Click to expand...
Click to collapse
it restarts every 5 sec. while i hold power

i tried it on ubuntu but nothing
typed lsusb but no opo :crying:

pirni said:
it restarts every 5 sec. while i hold power
Click to expand...
Click to collapse
Then run MSM8974 toolkit to identify your OPO and restore it on Color OS

ok so i tired everything
i delete all old drivers install the msm tool
Boot and hold vol up or down for 10sec 30sec up a minute ... nothing
only i vibrate and 1+ logo here thats it
no usb detecton nothing damm

pirni said:
ok so i tired everything
i delete all old drivers install the msm tool
Boot and hold vol up or down for 10sec 30sec up a minute ... nothing
only i vibrate and 1+ logo here thats it
no usb detecton nothing damm
Click to expand...
Click to collapse
i have the sam issue, and found no solution what so ever, all the solutions are if your phone is hard bricked and seen by the pc...does any one have some idea what to do?? please

Disconnect phone from USB.
Turn phone off. May have to hold power button down for 10-20 seconds.
Hold volume down button and while holding down hold in power button for about 3 seconds until phone vibrates, then release power then release volume down. Phone should boot into TWRP. Wipe "System" ONLY. Reboot system. If phone behaves as before, reboot into TWRP as before, reflash your ROM and reboot directly to TWRP (Recovery) again. Reflash ROM again and reboot system.
Report back.

Hy!
I tried it but it hangs on 1+ logo. Same while i tried to start in fastboot mode

tried so many times but nothing ... is there any JTAG solution or else?

So what you say is that if you completely shut down your phone and you hold ONLY volume up and connect it to your PC, nothing shows up? Not even QHUSB_Bulk in device manager?

no i only see the 1+ logo and than the charging logo. But my PC doesnt detect my phone

i used this http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
and this http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
also i postet my problem here: https://forums.oneplus.net/threads/hard-brick-and-no-usb-detecton.456216/#post-15096970
lancelot_69 means i only start the tool but i am sure that first the PC must detect my phone as QHUSB_Bulk or else ... but it wont.
I tried 1000 times i also tried it on other USB ports and other PC but still the same

Cannot Enter Bootloader or Use Volume Up.

Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.

Pra7ul said:
Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.
Click to expand...
Click to collapse
adb reboot bootloader

waterdaan said:
adb reboot bootloader
Click to expand...
Click to collapse
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.

Pra7ul said:
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.
Click to expand...
Click to collapse
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.

noahvt said:
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.
Click to expand...
Click to collapse
Even If my volume button dosent work then why wont it enter bootloader via advance reboot it just restarts to system after selecting reboot to bootloader,so i should hard brick my device once again, P.S. i have done that twice before though.

Help - my honor 8 was block - No access Fastboot Mode or Debugging Mode

Hello,
I downgraded my Honor 8 via Rollback and installed the Rom FRD-L09C432B131.
But my phone is stuck on the blue Android startup screen.
I can not use the Volume +, Volume - or Power buttons.
All I can do is let it turn off by itself when the battery is at 0%.
When I put it on, it turns on by itself. Arrives on a blue screen. Reboot once and then stays eternally on the blue screen while heating up enormously.
I have no access to the Recovery, erecovery or via the computer (by plugging it into a USB port).
Thanks

gregase said:
Hello,
I downgraded my Honor 8 via Rollback and installed the Rom FRD-L09C432B131.
But my phone is stuck on the blue Android startup screen.
I can not use the Volume +, Volume - or Power buttons.
All I can do is let it turn off by itself when the battery is at 0%.
When I put it on, it turns on by itself. Arrives on a blue screen. Reboot once and then stays eternally on the blue screen while heating up enormously.
I have no access to the Recovery, erecovery or via the computer (by plugging it into a USB port).
Thanks
Click to expand...
Click to collapse
Once your phone turns off, press power button amd volume up button together. This should take you to recovery. Or you can't access this at all?
Sent from my Honor 8 using XDA Labs

I can not turn off my phone. It goes off when the battery is at 0%.
If I put on USB or mains, it recharges and restarts automatically. And I can not stop it ...
When I plug it into a USB port, the Power, Volume + or Volume buttons are ineffective.
And when it's plugged into the PC, it does not show up!
So I do not have access ... except perhaps by a software that would force the connection ... or a manipulation other than Power / Volume ..

When I say reboots, it is a program to display the Android blue screen and hangs on it!

does it say android or honor?
going to dload is kinda tricky sometimes and should be done when connected to wall adapter, not pc
can you keep vol- and power pressed while your phone is connected to pc. keep them pressed even after the phone restarts. dont let go. it might take some time. does it go to fastboot?

gregase said:
I can not turn off my phone. It goes off when the battery is at 0%.
If I put on USB or mains, it recharges and restarts automatically. And I can not stop it ...
When I plug it into a USB port, the Power, Volume + or Volume buttons are ineffective.
And when it's plugged into the PC, it does not show up!
So I do not have access ... except perhaps by a software that would force the connection ... or a manipulation other than Power / Volume ..
Click to expand...
Click to collapse
Is your phone still covered by the warranty?
Sent from my Honor 8 using XDA Labs

Do a factory reset I believe

PalakMi said:
Do a factory reset I believe
Click to expand...
Click to collapse
He can't even boot to recovery.
Sent from my Honor 8 using XDA Labs

Ohhh, sorry my bad

dats prolly because he has mismatched files for the os he's running. he should deffo check if he can go to fastboot. the fact that he cant go to dload doesnt really mean anything because i cant do it either 40% of the time. its a bit iffy. the fact remains, if it boots to honor logo, means some type of os is up there. if he can go to fastboot he can flash stock recovery/recovery2 and try dload again. without proper recovery combo he wont be able to flash anything anyways and warranty prolly wont cover it since its users fault, esp if he has unlocked warning.

Delete

Rommco05 said:
Check first post
Click to expand...
Click to collapse
My bad

Rommco05 said:
No way, Im just want to show you is here too much threads witch similar problems and much information and experiences... I think about one guide/thread where will be all info about rollbacks and nougat firmwares. But is a lot of work about finding info, all is ok
Click to expand...
Click to collapse
Thank you :laugh:

Similar to me, only way is go into bootloader mode, then charge the phone for awhile, you cant do nothing cuz of 0% battery, flash stock recovery, update via dload or direct wifi recovery.

qvnsq said:
Similar to me, only way is go into bootloader mode, then charge the phone for awhile, you cant do nothing cuz of 0% battery, flash stock recovery, update via dload or direct wifi recovery.
Click to expand...
Click to collapse
He can't go to fastboot

if he completely bricked it, he'd be stuck at black screen/android logo, not honor logo. either he's not telling us everything (ran out of juice while upgrading / error while flashing / flashing wrong rom), there is no chance all key partitions got wiped if the process finished successfully. meaning at least he should be able to fastboot cause thats the first thing flashing alongside bootloader. no way any type of system partition is up there, and bl/fb is not, even if they are from a different OS. h8 can be stubborn at times, but keeping the cable in pc and holding vol_down+power for good 20s deffo will force it to at least reboot. thats the only way. if this doesnt work, you should take it to a service center.

I guess it's better if he takes it to the service center

Nothing works. So I have to send it to the service center

Thank you all !

gregase said:
Nothing works. So I have to send it to the service center
Click to expand...
Click to collapse
It's sad but, I hope it gets fixed