Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.
No luck so far, is there no way to get past this screen?
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium
Sweeeet ! Well played :good::good::good::good:
Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...
I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.
Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium
I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!
Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor
Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.
Hi good afternoon, a few days ago my cel was shut down suddenly and assumed it would be for low battery, when I went to turn would not start, so I started to install the official 4.1.2 rom with odin but it failed, and now cel will not start, I just use the download mode and when I try to turn normally, I get a screen with a cel a PC and a yellow triangle with a message "Firmware upgrade Encountered at issue. Please selec recovery mode in Kies & try again. "and tried to put the same official rom 4.1.2 again but the process remains in NAND write start !, anyone know if this is soft brick? if I can help I thank you very much, the cel was a gift and I have no money to afford another android. Thanks in advance
Hi Guys,
I have the Samsung galaxy S duos (7582) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to hert screen with Samsung logo and phone model) with connecting to charger e or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons.
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying:
[email protected] said:
Hi Guys,
I have the Samsung galaxy S duos (7562) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to the start screen with Samsung logo and phone model) with connecting to phone or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons.
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try following this guide http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791 it should save it.
billysam said:
Try following this guide http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791 it should save it.
Click to expand...
Click to collapse
sam,
hi billy sam,
am really sorry that i have mentioned the phone model as 7562 instaed of 7582. kindly provide the link for 7582 as well let me try to do it. also today when i connected my phone to charger it shows the message that " firmware upgrade encountered an issue. please select recovery mode in kies & try again"
[email protected] said:
sam,
hi billy sam,
am really sorry that i have mentioned the phone model as 7562 instaed of 7582. kindly provide the link for 7582 as well let me try to do it. also today when i connected my phone to charger it shows the message that " firmware upgrade encountered an issue. please select recovery mode in kies & try again"
Click to expand...
Click to collapse
Well you were saved. always make sure about the device model before flashing. anyways it's the wrong thread here. its not a big issue and don't need very complex method. just download the stock firmware you want from sammobile and flash it through odin.
Hi, everyone Thanks again for all the hard work
my problem is i have a Tmobile galaxy s6 wich is soft brick,
the phone is not powering on
No recovery mode
jtag did not work
smarthub emergency recovery did not work
when you plug in to he computer odin recognize it (the phone turn on with the blue screen with the message "An error has occured while updating the device software............PC software)but you can t flash nothing because frp is locked.
I attach the blue screen with the message
any help will be appreciate. Thanks you all.
Hello,
i hope you can help me.. i rooted my galaxy s7 with magnisk, what worked great. Theni want to unroot it and tried with ''Samsungs Smart Switch'' to get back to the Stock ROM, then there was an error ''An Error has occurred while updating the Device Software. Use the Emergency recovery function in the smart switch pc software'', but this also doesnt work.
So i tried tu flash it manually with Odin, and the stockrom from sammobile.com but this stocks every time there at ca 5-10% and there is no error in odin, it just stuck, it looks like this since 7 hours, the download mode an the galaxy was active..
i hope you can help me.. Thanks!!!
Masterdio said:
Hello,
i hope you can help me.. i rooted my galaxy s7 with magnisk, what worked great. Theni want to unroot it and tried with ''Samsungs Smart Switch'' to get back to the Stock ROM, then there was an error ''An Error has occurred while updating the Device Software. Use the Emergency recovery function in the smart switch pc software'', but this also doesnt work.
So i tried tu flash it manually with Odin, and the stockrom from sammobile.com but this stocks every time there at ca 5-10% and there is no error in odin, it just stuck, it looks like this since 7 hours, the download mode an the galaxy was active..
i hope you can help me.. Thanks!!!
Click to expand...
Click to collapse
Corrupted image when downloading try downloading a more reliable firmware to restore also may want to update Odin , Samsung is like iPhone it's hard to mess up restoring
Redownload the stock rom using SamFirm tool or updato.com. If ODIN keeps getting stuck change the USB cable. Do not use generic cables to flash roms or this will happen. Happened me twice, I changed the cable to a brand new stock one (purchased at the official service) and the problem was fixed
Sent from my SM-G930F using Tapatalk