Related
Hi, first flashed french 5.1.1 and now that vodafone has released the branded 5.1.1 want to back to stock (ATL) but when flash the sammobile package the csc changes to SIM (vodafone slovenia) and there´s no way to change the csc.
I´ve reading a lot and seems the ATL package is multicsc and flashing defaults to SIM. and there´s no possibility to change csc because cant root 5.1.1
Im totally stuck. Why want the branded? the operator customization and VoLTE activation.
Thanks to all
Do a factory reset in the bootloader, boot up and then flash the operator rom again
*#272*IMEI#
Tried flashing, boot, wipeall twice, flashing wipe data and cache but the multicsc stays as SIM csc...
*#272.... doesnt work in this devices.
tried to downgrade to 5.0.2 and root to change manually csc but the bootloader is upgraded keeping downgrades.
the only hope is pingpongroot or anyone can root 5.1.1 without tripping knox
Bring your S6 back to Samsung for official ROM flashing back to stock.
Only way to change CSC is to root...
roydok said:
Only way to change CSC is to root...
Click to expand...
Click to collapse
Not true. I did it several times on unrooted stock devices.
godutch said:
Not true. I did it several times on unrooted stock devices.
Click to expand...
Click to collapse
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
Did you let the phone boot completely after flashing the new firmware and then do the wipe from recovery?
Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).
roydok said:
Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).
Click to expand...
Click to collapse
You could try without a simcard (flash, boot up, wipe in recovery) or a different simcard. I never manage to change csc either in 1 go and the results can be different, eg sometimes I get Vodafone apps installed and sometimes not....
Will try it without a SIM card. Thanks.
roydok said:
Will try it without a SIM card. Thanks.
Click to expand...
Click to collapse
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK
greenredblue said:
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK
Click to expand...
Click to collapse
I also tried it but couldn't get it to the correct CSC (VDF in my case) either, I can do it with other packages and get it to PHN (dutch)
roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.
tiborprogmed said:
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.
Click to expand...
Click to collapse
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
i have flashed the XEF. and that was wrong. esspecially it broke the spo2, and stress measuring... I would go back to another, BUT after XEF, I always had flashing interrupt in the HIDDEN file stage.
But after I have found a flashable FW again ( maybe SER or SEB) I was able to flash XEH, or BTU. and it was changing the XEF to SEB OR SER after wipe in recovery.
The only rom I will never flash againt is XEF.
ps: i never root this 920F
greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
Now I was able to reproduce it twice!!! :
How it works : on devices where dialer NOT shown up CSC changer (e.g.: GS6920F) :
Go to recovery, Dial up, Home + Power
wipe cache and perform a factory reset
next is important : power down the phone. NOT to reboot.
Power on in download mode: volume down+home+power buttons
FLASH for example : BTU :
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar
after reboot, it will be English, and If U go to recovery it will apply BTU.
Hope it helps
p.s.: It wont works with EVERY Firmware. don't know WHY. For example :
I wanted to flash after succesfully changed the CSC from TPH to BTU, so I wanted to flash XEH....BUT that resets to TPH after XEH flash.
So at least to BTU it works specially if you are in TPH CSC !
Can someone help me find any download source of this firmware,
Galaxy s6 DUOS, SM-G920FD
As I wanted to Upgrade my galaxy s6 duos to andorid 5.1.1
But unfortunately, from SamMobile firmware website, they do not have that kind of firmware on my phone.
Can you please, if any, share your firmware . Any help will be appreciated.
Details:
AP: G920FXXU1AODE
CP: G920FXXU1AODE
CSC: G920FOJV1AODE
Model: SM-G920FD
I think it's the same as g920f
I have g920fd and in settings it reads phone model as g920f and baseband as G920FXXU2BOFJ whitch is the same for g920f
i dont know if it has any additional software to handle dual sim or not
edit: in other thread some users confirms that g920f can be installed
check http://forum.xda-developers.com/galaxy-s6/general/galaxy-s6-duos-dual-sim-t3079017/page62
scorpion112 said:
Can someone help me find any download source of this firmware,
Galaxy s6 DUOS, SM-G920FD
As I wanted to Upgrade my galaxy s6 duos to andorid 5.1.1
But unfortunately, from SamMobile firmware website, they do not have that kind of firmware on my phone.
Can you please, if any, share your firmware . Any help will be appreciated.
Details:
AP: G920FXXU1AODE
CP: G920FXXU1AODE
CSC: G920FOJV1AODE
Model: SM-G920FD
Click to expand...
Click to collapse
I have the firmware 5.1.1 for FD MTZ and ECT CSC, but i dont have the bandwidth to upload. This link is definately for the FD as i have same duos version.
http://live.samsung-updates.com/details/48692/Galaxy_S6/SM-G920F/MTZ/G920FXXU2BOFL.html
Here you go. Choose your country and flash via odin:
http://www.sammobile.com/firmwares/database/SM-G920F/
roydok said:
Here you go. Choose your country and flash via odin:
http://www.sammobile.com/firmwares/database/SM-G920F/
Click to expand...
Click to collapse
Thats mean can i flash SM-G920F Rom
With SM-G920FD without any proplem
scorpion112 said:
Thats mean can i flash SM-G920F Rom
With SM-G920FD without any proplem
Click to expand...
Click to collapse
Yes.
scorpion112 said:
Thats mean can i flash SM-G920F Rom
With SM-G920FD without any proplem
Click to expand...
Click to collapse
Have you done this? Did you flash firmware for the 920 F on the 920 FD? Did everything work ok? I just ordered the 920 FD and am wondering how I also can upgrade it when I receive it to Android 5.1.1
yes yes i flash a g920f rom with fd
and every thing works fine
its the same frimware g920fd and g920f
you can safely flash it ^_^
scorpion112 said:
yes yes i flash a g920f rom with fd
and every thing works fine
its the same frimware g920fd and g920f
you can safely flash it ^_^
Click to expand...
Click to collapse
Thanks a lot. One more question. I am french but based in the usa. Out of all the 920f firmwares which one would be the most generic. I see a bunch that have "unkown" listed as the country. Which firmware would be the most generic?
GCbard said:
Thanks a lot. One more question. I am french but based in the usa. Out of all the 920f firmwares which one would be the most generic. I see a bunch that have "unkown" listed as the country. Which firmware would be the most generic?
Click to expand...
Click to collapse
Just flash via odin this latest 5.1.1 generic stock ROM
http://www.sammobile.com/firmwares/download/51274/G920FXXU2BOG8_G920FOXA2BOG8_XEF/
roydok said:
Just flash via odin this latest 5.1.1 generic stock ROM
http://www.sammobile.com/firmwares/download/51274/G920FXXU2BOG8_G920FOXA2BOG8_XEF/
Click to expand...
Click to collapse
Thanks. So I can flash this firmware and then install twrp. After that I can flash a fd compatible 5.1.1 rom? Can someone confirm if this is correct.
yes
roydok said:
Just flash via odin this latest 5.1.1 generic stock ROM
http://www.sammobile.com/firmwares/download/51274/G920FXXU2BOG8_G920FOXA2BOG8_XEF/
Click to expand...
Click to collapse
where did you find this firmware? On sammobile I can onluy find Byogues and Oranage for France.
Its there. You need to sign-in to access it.
roydok said:
Its there. You need to sign-in to access it.
Click to expand...
Click to collapse
Thanks. I loaded it today when I received the phone and it works great!
s6 dual error
i tried flashing latest firmware from sammobile
but it gives me error on hidden.img
i have sorted the flashing problem by using the pit file of uae
ZEROFLTE_EUR_OPEN_HIDDEN150M (OJV Middile East Files)
nut now the issue is that the phone is stuck in bootloop
tried factory reseting also
tried flashing Unikeranal also through odin
please help me out
phone is samsung s6 dual (G920FD)
afzalcool said:
s6 dual error
i tried flashing latest firmware from sammobile
but it gives me error on hidden.img
i have sorted the flashing problem by using the pit file of uae
ZEROFLTE_EUR_OPEN_HIDDEN150M (OJV Middile East Files)
nut now the issue is that the phone is stuck in bootloop
tried factory reseting also
tried flashing Unikeranal also through odin
please help me out
phone is samsung s6 dual (G920FD)
Click to expand...
Click to collapse
have you fixed this? I tried to flash G920F XSG to my G920FD and got hidden.img error and I don't want to try to use pit file til I can guarantee it's safe to use.
coowkeee said:
have you fixed this? I tried to flash G920F XSG to my G920FD and got hidden.img error and I don't want to try to use pit file til I can guarantee it's safe to use.
Click to expand...
Click to collapse
i flashed with pit my phone sucessful flashed but its was stuck in bootloop
afzalcool said:
i flashed with pit my phone sucessful flashed but its was stuck in bootloop
Click to expand...
Click to collapse
have you tried going back to your phone's default firmware?
HI.
I have 935F I bought with the CSC TPA.
I flashed a new firmware with another CSC, and now the CSC of my phone is empty (Recovery says multi-csc).
I flashed via odin AP. Do I need also to flash the CSC file in odin?
What is the solution to get the new CSC?
Thanks!
tal_be said:
HI.
I have 935F I bought with the CSC TPA.
I flashed a new firmware with another CSC, and now the CSC of my phone is empty (Recovery says multi-csc).
I flashed via odin AP. Do I need also to flash the CSC file in odin?
What is the solution to get the new CSC?
Thanks!
Click to expand...
Click to collapse
Hi
what files did you flash? all 4 files?
What did you use home_csc or CSC
I do also have the same doubt. If a flash a BTU firmware over a ZTO one, will I be able to get my csc back to ZTO without root?
MAX 404 said:
Hi
what files did you flash? all 4 files?
What did you use home_csc or CSC
Click to expand...
Click to collapse
I flashed only the AP file. Should I use also the CSC file?
nanca said:
I do also have the same doubt. If a flash a BTU firmware over a ZTO one, will I be able to get my csc back to ZTO without root?
Click to expand...
Click to collapse
tal_be said:
I flashed only the AP file. Should I use also the CSC file?
Click to expand...
Click to collapse
Hi mates
You can change from one csc to another without problem , root is no need but when changing CSC you will factory reset your phone , if you keep same csc you can upgrade firmware without factory reset ( no data loss) when you keep the same csc you use home_csc file ( odin flashing) . if you change CSC , you need to flash the CSC file ( this will factory reset your phone.
@tal_be yes you do, actually is recommended to flash all four files
Check this thread
MAX 404 said:
Hi mates
You can change from one csc to another without problem , root is no need but when changing CSC you will factory reset your phone , if you keep same csc you can upgrade firmware without factory reset ( no data loss) when you keep the same csc you use home_csc file ( odin flashing) . if you change CSC , you need to flash the CSC file ( this will factory reset your phone.
@tal_be yes you do, actually is recommended to flash all four files
Check this thread
Click to expand...
Click to collapse
Can I Flash only the AP and CSC files?
Hi I got the same problem. I flashed all 4 files (CSC no home_CSC), and "original CSC code" is empty, active csc is XEF, and available csc are multiple. I flashed BTU but it stil XEF.
tal_be said:
Can I Flash only the AP and CSC files?
Click to expand...
Click to collapse
Yes you can....but as i said recommended is the four of them
---------- Post added at 07:55 AM ---------- Previous post was at 07:37 AM ----------
wolkowicz said:
Hi I got the same problem. I flashed all 4 files (CSC no home_CSC), and "original CSC code" is empty, active csc is XEF, and available csc are multiple. I flashed BTU but it stil XEF.
Click to expand...
Click to collapse
Hi mate
I should had changed m BTU is a single csc firmware , where did you get the firmware from , no errors during odin flashing??
MAX 404 said:
Yes you can....but as i said recommended is the four of them
---------- Post added at 07:55 AM ---------- Previous post was at 07:37 AM ----------
Hi mate
I should had changed m BTU is a single csc firmware , where did you get the firmware from , no errors during odin flashing??
Click to expand...
Click to collapse
I download frimware from sammobile.com. Try two times, both successful without any errors. Even after flash new rom when I choosing language there is french as first not english.
wolkowicz said:
I download frimware from sammobile.com. Try two times, both successful without any errors. Even after flash new rom when I choosing language there is french as first not english.
Click to expand...
Click to collapse
and you are using CSC not home_csc file right? also latest odin version..
MAX 404 said:
and you are using CSC not home_csc file right? also latest odin version..
Click to expand...
Click to collapse
Yes and yes. Odin 3.12.3
I have done same thing last year on S6 (from TPL to BTU) and there were no problems. But this is strange.
wolkowicz said:
Yes and yes. Odin 3.12.3
I have done same thing last year on S6 (from TPL to BTU) and there were no problems. But this is strange.
Click to expand...
Click to collapse
It really is....try a different single CSC firmware ( other than BTU) see if it change and if it does try again with BTU
wolkowicz said:
Hi I got the same problem. I flashed all 4 files (CSC no home_CSC), and "original CSC code" is empty, active csc is XEF, and available csc are multiple. I flashed BTU but it stil XEF.
Click to expand...
Click to collapse
Original csc code requires root.
Sent from my SM-G930F using Tapatalk
I have a samsung j7 (j7ooh) and flashed the enigma rom by allooosh98, after flashing the rom my imei got changed into 350000000006 and it shows emergency calls only, everytime i try to register it into a network it says can't register into a network, i reverted back to stock firmware but it did'nt fix the issues, and I forgot to make a back up after flashing the enigma rom, so i dont have the back up for efs and radio, so i kindly ask for help or suggestions on how i can fix it, and if someone with galaxy j7 (700h) could give a back up of their efs and radio i would be greatful, thank you.
Give SmartSwitch a try.
Sent from my SM-A720F using Tapatalk
Thank you for your reply,..i already tried using smart switch but it did'nt work
Use odin and flash stock rom with some odin options tick...
1). Re-partition
2).Nand Erase all
and then go to pit tab
download the pit file for your model here and load into odin. ( J700H odin file)
and flash the ROM.
your phone will be like new. With 100% original IMEI restore.
Give me a thanks!! :good::good::good:
Worked for me !!
thanks bro....
ydvanil said:
Use odin and flash stock rom with some odin options tick...
1). Re-partition
2).Nand Erase all
and then go to pit tab
download the pit file for your model here and load into odin. ( J700H odin file)
and flash the ROM.
your phone will be like new. With 100% original IMEI restore.
Give me a thanks!! :good::good::good:
Click to expand...
Click to collapse
Hi Sir,
I am facing similar issue but I have J7 2016 Model. SM-J710FN
Do you have PIT file for that?
Please share if you do
Thanks in advance
Pit file for J710FN
jumbobombo said:
Hi Sir,
I am facing similar issue but I have J7 2016 Model. SM-J710FN
Do you have PIT file for that?
Please share if you do
Thanks in advance
Click to expand...
Click to collapse
Download here
Hit Thanks
ydvanil said:
Use odin and flash stock rom with some odin options tick...
1). Re-partition
2).Nand Erase all
and then go to pit tab
download the pit file for your model here and load into odin. ( J700H odin file)
and flash the ROM.
your phone will be like new. With 100% original IMEI restore.
Give me a thanks!! :good::good::good:
Click to expand...
Click to collapse
ydvanil said:
Download here
Hit Thanks
Click to expand...
Click to collapse
Hey,
Thanks for your reply
I tried this method to return to full stock but I am not able to flash new firmware via Odin
I've posted the problem in a thread.
https://forum.xda-developers.com/galaxy-j7/help/j7-2016-sm-j710fn-restore-to-stock-odin-t3630811
Please help me if you have any solution
Thanks in advance
Either you're flashing wrong Rom or trying to downgrade.
jumbobombo said:
Hey,
Thanks for your reply
I tried this method to return to full stock but I am not able to flash new firmware via Odin
I've posted the problem in a thread.
https://forum.xda-developers.com/galaxy-j7/help/j7-2016-sm-j710fn-restore-to-stock-odin-t3630811
Please help me if you have any solution
Thanks in advance
Click to expand...
Click to collapse
Please share your last Android version.
Phone model
country name
I'll provide you links then download and try that firmware.
ydvanil said:
Please share your last Android version.
Phone model
country name
I'll provide you links then download and try that firmware.
Click to expand...
Click to collapse
Thanks so much
Android version 6.0.1
Phone model Samsung Galaxy J7 2016 SM-J710FN
Country India
This is latest firmware for your J710FN.
Download it and then flash it'll be flash without any problem.
Download Here
---------- Post added at 10:46 AM ---------- Previous post was at 10:45 AM ----------
jumbobombo said:
Thanks so much
Android version 6.0.1
Phone model Samsung Galaxy J7 2016 SM-J710FN
Country India
Click to expand...
Click to collapse
Download it and then flash it'll be flash without any problem.
Download Here
ydvanil said:
Download it and then flash it'll be flash without any problem.
Download Here
---------- Post added at 10:46 AM ---------- Previous post was at 10:45 AM ----------
Download it and then flash it'll be flash without any problem.
Download Here
Click to expand...
Click to collapse
I am getting same cm.bin error in this rom
Download mode of my phone shows sm-j710f so I downloaded a rom of SM-J710F and flashed using Odin and it worked
On the phone box the model says SM-J710FN but the actual model of the phone I guess is SM-J710F
Anyways thankfully I am on complete stock now but the first boot image is still of Samsung Galaxy S8. The image that shows when you first switch on the phone.
It is from the supernova rom that I had flashed.
I don't know who this didn't change back to stock :crying:
And now I don't even have root to change it back
Do you have any suggestion?
Thanks in advance
You need Flash boot image Manually
jumbobombo said:
I am getting same cm.bin error in this rom
Download mode of my phone shows sm-j710f so I downloaded a rom of SM-J710F and flashed using Odin and it worked
On the phone box the model says SM-J710FN but the actual model of the phone I guess is SM-J710F
Anyways thankfully I am on complete stock now but the first boot image is still of Samsung Galaxy S8. The image that shows when you first switch on the phone.
It is from the supernova rom that I had flashed.
I don't know who this didn't change back to stock :crying:
And now I don't even have root to change it back
Do you have any suggestion?
Thanks in advance
Click to expand...
Click to collapse
Stock rom package doesn't include the boot image, you can flash it manually through twrp
look for boot animation for your phone you'll find, then you can flash it via twrp.
or
use rom tool box/flashify to flash the boot image package.
ydvanil said:
Stock rom package doesn't include the boot image, you can flash it manually through twrp
look for boot animation for your phone you'll find, then you can flash it via twrp.
or
use rom tool box/flashify to flash the boot image package.
Click to expand...
Click to collapse
Yes but I am not rooted now and with Samsung recovery.
I do not want to root since that will increase my warranty void counter.
Right now the counter is on 1
Any other work around?
Flash This
jumbobombo said:
I am getting same cm.bin error in this rom
Download mode of my phone shows sm-j710f so I downloaded a rom of SM-J710F and flashed using Odin and it worked
On the phone box the model says SM-J710FN but the actual model of the phone I guess is SM-J710F
Anyways thankfully I am on complete stock now but the first boot image is still of Samsung Galaxy S8. The image that shows when you first switch on the phone.
It is from the supernova rom that I had flashed.
I don't know who this didn't change back to stock :crying:
And now I don't even have root to change it back
Do you have any suggestion?
Thanks in advance
Click to expand...
Click to collapse
J7 boot Animation
Flash this Download here
---------- Post added at 07:04 PM ---------- Previous post was at 06:59 PM ----------
jumbobombo said:
Yes but I am not rooted now and with Samsung recovery.
I do not want to root since that will increase my warranty void counter.
Right now the counter is on 1
Any other work around?
Click to expand...
Click to collapse
If the counter is 1 you're already out of warranty.
There's no other way to change boot animation.
And you can even change boot animation with samsung recovery, If you're rooted.
Network not registered
ydvanil said:
Use odin and flash stock rom with some odin options tick...
1). Re-partition
2).Nand Erase all
and then go to pit tab
d
and flash the ROM.
your phone will be like new. With 100% original IMEI restore.
Give me a thanks!! :good::good::good:
Click to expand...
Click to collapse
hello sir,
I have samsung j7 sm-g610f please give me a link where i can get the pit file. I need to fix this problem too.
Thank you in advance
Network doesn't work / not registered
I have same problem too
my samsung SM-J710FN/DS,
i tried flash it with stock ROM from India, but it failed.
if you could help me to find stock ROM from my region, it would be helpful..
it is Indonesia Region..
Thanks in advance !
hello guys , i need help i can't use network always telling me not registred on network i have a j7 prime sm-g610f i flashed it and now i have this problem , i am using android version 6.0.1 model j7 prime sm-g610f country tunisia . Please help me thanks
Hello
I have a problem with my J710F(N) and a lot of custom rom on it
Everytime , custom rom send SMS to 919560345888
After checks on all custom rom , they use ODD CSC (India) ,
I think the SMS send come from the CSC
My question is : Can i flash my stock CSC (XEF) (extract from SmartSwitch) on a custom rom to wipe this problem ?
If yes , how to ?
Thanks.
NeelKfrey said:
Hello
I have a problem with my J710F(N) and a lot of custom rom on it
Everytime , custom rom send SMS to 919560345888
After checks on all custom rom , they use ODD CSC (India) ,
I think the SMS send come from the CSC
My question is : Can i flash my stock CSC (XEF) (extract from SmartSwitch) on a custom rom to wipe this problem ?
If yes , how to ?
Thanks.
Click to expand...
Click to collapse
You can extract stock csc from firmware it's in the cache.img.ext4
Sent from my LGLS676 using Tapatalk
rick.wardenburg said:
You can extract stock csc from firmware it's in the cache.img.ext4
Sent from my LGLS676 using Tapatalk
Click to expand...
Click to collapse
Thanks , i have already do that ,
After that i just have to edit the rom system/csc and replace the old csc folder with the stock ?
Just delete an replace csc folder that's in the zip
Sent from my LGLS676 using Tapatalk
rick.wardenburg said:
Just delete an replace csc folder that's in the zip
Sent from my LGLS676 using Tapatalk
Click to expand...
Click to collapse
This is what I have already done ,
Now "Phone Info" say i use XEF CSC (Product Code : J710FZKNXEF and all XEF in "CODE CSC") , but the CSC version (Firmware) is still ODD
It does not matter ?
@NeelKfrey
How to check CSC Version?
Press *#1234# to gives u the CSC Version.
You can also change the change the Consumer Software Customization (CSC) if you found that it has been not set correctly.
Firstly you need to find the IMEI Code of your Phone
Press *#06# to get the IMEI and copy it down
Press *#272*IMEI# on the dial pad
Select the desire CSC
The device will reboot automatically(Possibly factory reset)
Sent from my LGLS676 using Tapatalk
Edit: sorry misread post don't think this will work on custom rom has to be based on stock
rick.wardenburg said:
@NeelKfrey
How to check CSC Version?
Press *#1234# to gives u the CSC Version.
You can also change the change the Consumer Software Customization (CSC) if you found that it has been not set correctly.
Firstly you need to find the IMEI Code of your Phone
Press *#06# to get the IMEI and copy it down
Press *#272*IMEI# on the dial pad
Select the desire CSC
The device will reboot automatically(Possibly factory reset)
Sent from my LGLS676 using Tapatalk
Edit: sorry misread post don't think this will work on custom rom has to be based on stock
Click to expand...
Click to collapse
After a full copy of the stock cache.img (from CSC firmware) , all seems good , my problem seems fixed
NeelKfrey said:
After a full copy of the stock cache.img (from CSC firmware) , all seems good , my problem seems fixed
Click to expand...
Click to collapse
I have the same problem but with a J5.
You could explain step by step how you did to solve it! I'm desperate! I'm a noob. Could you help me?
Nothing happens on my samsung galaxy sm j710f bought from saudi arabia when i dial *#272*imei#.
plz find me a solution.