Hi!
I've recently installed a stock recovery image after I wanted to update to 5.1 on my L09, and I've had problems installing updates ever since.
Whenever I select a local update to apply, the phone restarts, loads up the update and quickly reports an error message saying that the update could not be installed. I suspect that I might have installed the stock recovery of the L10 instead of the L09, and thus the updater isn't working as it should, since the recovery image I've flashed wasn't labelled in any way.
What else could be the issue, and is there a recovery.img of the L09 recovery out there somewhere?
Try this
Download the correct firmware of your Mate and use Hisuite to update it over PC, Usb debbugging turn on
I had the unlocked bootloader L10 with L09 recovery and It works
Related
i thought, i might just do a separate topic, as it gets overseen easily in other threads...
What i did:
had b140 working fine. Wanted to Update to b312 Lollipop, worked well. Then, i had some problems with Google Play Services and such. Wanted to downgrade.
First, flashed stock recovery, worked fine.
Next, Transfer Package b300: No Problem
After that, b137 as KK Rom: Updates to 90% then doesn't move.
What i already tried:
- b127, b137, b141, b312 all won't either start update or get stuck at 90%. All tried with and without previous Transfer Package.
- boot and recovery .img from Stock 4.4 and 5.1 to no avail.
- Unpacked b137 and flashed boot, system, just and recovery. No boot, no downgrade
- flashed twrp 4.4 and 5.1 both 2.6 and 2.7. One did work, throws message about not being able to mount /emmc.
- tried flashing the one custom rom EMUI based for L09, script runs perfectly, before reboot: "No Rom Installed". Won't boot
- tried CM11: Won't flash properly.
I'm pretty much out of options now. I'll take anything workable. KK or LP or what ever, as long as i'm able to recover that phone. Any ideas guys?
OMG, got it working. After two days of flashing anything i found, o went back as far as i could.
1. Bootloader, flashed boot and recovery from 5.1
2. Transition Package for LT09 fro here :Huawei Rollback LT09 (Had to boot 3 Button method with SD-Card not Inserted, then after huawei logo push sd-card in)
3. b120SP03 fro here: Huawei b120SP03 (again, three button method with sd-card not inserted, then after huawei Logo push sd-card in)
This was the first firmware that booted for me. Now i need to setup and see if i can get OTA...
I can't tell you how happy am :laugh:
Excellent well done.
Hopefully this helps someone else too.
bricked
i have a MT7-L09 it does not boot other then a vibration showing the logo the turning off straight away any fix for this ?
Build Number: FRD-L04C567B320 (USA)
Files for DOWNLOAD:
Download link:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68366/f1/full/update.zip
Region Patch:
http://update.hicloud.com:8180/TDS/...66/f1/full/hw/usa/update_data_full_hw_usa.zip
How to install:
1. Requirements: Your device needs to have TWRP custom recovery installed and has to be rooted.
2. Before proceeding make sure that your device model is FRD-L04 from Settings > About phone.
3. Download the update.zip package from above links and copy it to your Sdcard /dload folder.
4. Turn your phone off and reboot into recovery mode by hold Vol up + Power for a few seconds.
5. Back up all the partitions into the external microSD card (recommended).
6. Now go to Install and select the update.zip package you copied to your Sdcard.
7. Upon installation wipe the cache and reboot your phone.
8. In case you encounter issues with Bluetooth, NFC, etc you can try flashing the region package provided above through TWRP.
Warning: As mentioned earlier, this is a beta update that contains many bugs and has several compatibility issues with hardware and 3rd party apps.
USE IT AT YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY BROKEN RELATED TO IT
perzan07 said:
Build Number: FRD-L04C567B320 (USA)
Files for DOWNLOAD:
Download link:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68366/f1/full/update.zip
Region Patch:
http://update.hicloud.com:8180/TDS/...66/f1/full/hw/usa/update_data_full_hw_usa.zip
How to install:
1. Requirements: Your device needs to have TWRP custom recovery installed and has to be rooted.
2. Before proceeding make sure that your device model is FRD-L04 from Settings > About phone.
3. Download the update.zip package from above links and copy it to your Sdcard /dload folder.
4. Turn your phone off and reboot into recovery mode by hold Vol up + Power for a few seconds.
5. Back up all the partitions into the external microSD card (recommended).
6. Now go to Install and select the update.zip package you copied to your Sdcard.
7. Upon installation wipe the cache and reboot your phone.
8. In case you encounter issues with Bluetooth, NFC, etc you can try flashing the region package provided above through TWRP.
Warning: As mentioned earlier, this is a beta update that contains many bugs and has several compatibility issues with hardware and 3rd party apps.
USE IT AT YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY BROKEN RELATED TO IT
Click to expand...
Click to collapse
Thanks ..
I might as well post this here -> -> How to: Root and repair data on the FRD-L04 - B320
https://forum.xda-developers.com/showpost.php?p=70266853&postcount=262
Will android pay stop working even if I use the official beta 7.0?
Thanks man, but is there any successful way to flash B324 so far?
Is Wi-Fi calling enabled in this beta?
Managed to do the same using Charles app (see https://forum.xda-developers.com/ho...-to-nougat-t3510275/post69885525#post69885525) without any unlocking and flashing.
I have the FRD-L04B567 phone. I installed the TWRP for the Honor 8. I have installed a different ROM (CM13.1 ROM) successfully. I followed your instructions to the "T" in post #1 . The install of update.zip stopped at /cust with an error. I tried wiping and rebooting but am stuck in the "honor" bootup screen. Unable to force back into TWRP or fastboot or ADB at this time. Still picking up the pieces....
UPDATE: I forced phone into Huawei eRecovery screen and selected factory reset/wipe That got Nougat running but there is no keyboard and Google will only allow voice for any input. Since my wifi is encrypted, I cant give Nougat a password to get on the internet. I am creating a temporary unencrypted network to see if I can get further.
UPDATE: TWRP was wiped so I will reinstall. Then I will try update the regional update (second update mentioned)
UPDATE: Reflashed TWRP 3.0.2.0 for Honor 8, I can get into the bootloader but not recovery, eRecovery works but...(worthless). I cant flash the second update.zip because I cant get TWRP started. Obviously 3.0.2.0 is not compatible with Nougat, I may try 3.0.3.0? why not...
UPDATE - Flashing TWRP 3.0.3.0 was dumb. Now ADB sees the device (good) but I can not get to bootloader or recovery. TWRP flashes (displays) once a second and will not start (bad) . Hopefully someone can learn from my quest.
So, can someone help me proceed from a state where ADB sees the device? thanks Maybe extract update.zip?
thekubiaks said:
So, can someone help me proceed from a state where ADB sees the device? thanks Maybe extract update.zip?
Click to expand...
Click to collapse
This guy
https://forum.xda-developers.com/member.php?u=4210629
Could help you recover, but he will be back only after 15th Jan.
Have you tried Huawei's hisuite? It has a recovery option..
yalokiy said:
This guy
https://forum.xda-developers.com/member.php?u=4210629
Could help you recover, but he will be back only after 15th Jan.
Have you tried Huawei's hisuite? It has a recovery option..
Click to expand...
Click to collapse
Thanks for the reply, I finally got TWRP 3.0.2.0 for Honor 8 flashed (but now it won't work), I believe Nougat and TWRP aren't compatible. Huawei Hisuite said that phone was fine and recovery not necessary??? I disagree. I think I will have to wait for TWRP that is Nougat compatible with FRD-L04
thekubiaks said:
I have the FRD-L04B567 phone. I installed the TWRP for the Honor 8. I have installed a different ROM (CM13.1 ROM) successfully. I followed your instructions to the "T" in post #1 . The install of update.zip stopped at /cust with an error. I tried wiping and rebooting but am stuck in the "honor" bootup screen. Unable to force back into TWRP or fastboot or ADB at this time. Still picking up the pieces....
UPDATE: I forced phone into Huawei eRecovery screen and selected factory reset/wipe That got Nougat running but there is no keyboard and Google will only allow voice for any input. Since my wifi is encrypted, I cant give Nougat a password to get on the internet. I am creating a temporary unencrypted network to see if I can get further.
UPDATE: TWRP was wiped so I will reinstall. Then I will try update the regional update (second update mentioned)
UPDATE: Reflashed TWRP 3.0.2.0 for Honor 8, I can get into the bootloader but not recovery, eRecovery works but...(worthless). I cant flash the second update.zip because I cant get TWRP started. Obviously 3.0.2.0 is not compatible with Nougat, I may try 3.0.3.0? why not...
UPDATE - Flashing TWRP 3.0.3.0 was dumb. Now ADB sees the device (good) but I can not get to bootloader or recovery. TWRP flashes (displays) once a second and will not start (bad) . Hopefully someone can learn from my quest.
So, can someone help me proceed from a state where ADB sees the device? thanks Maybe extract update.zip?
Click to expand...
Click to collapse
If you want to get back to any working state, i recovered from 7.0 unbootable to vanilla 6.0 like so (for frd-l09, but probably still applies):
https://forum.xda-developers.com/honor-8/how-to/honor-8-bricked-t3521813/post70326674#post70326674
// edit, also for completeness, i then flashed twrp 3.0.2 (official) and installed the cm 7.1.1 from the other thread here. All working fine.
fuflo,
thank you for your reply, it helped me get my Honor 8 back up and running.... I am now running CM 14.1 and Nougat 7.1.1 on my FRD-L04
Cheers
---------- Post added at 05:32 AM ---------- Previous post was at 05:31 AM ----------
fuflo,
thank you for your reply, it helped me get my Honor 8 back up and running.... I am now running CM 14.1 and Nougat 7.1.1 on my FRD-L04
Cheers
B320? I used these update files and mine says B317. Am I missing something?
jim262 said:
B320? I used these update files and mine says B317. Am I missing something?
Click to expand...
Click to collapse
Look again in the thread closely, you'll find another script to go to B320
Same problem as above, I could flash the update.zip, but not the USA package, maybe I didn't have the right TWRP version?
I have a Huawei Honor 6X BLN-L24 that recently attempted to do an OTA update. The update corrupted the ROM and bricked the phone. Whenever I turn on the phone, a screen comes up stating: "Your device has been unlocked and can't be trusted." It gives me options to boot into recovery mode and fastboot mode. I can't access fastboot to flash a new ROM via ADB. When I go into recovery, it tries to download and install an updated firmware, but fails.
I already tried downloading the firmware from Huawei's website, extracting it, and putting the files on a microSD card to try to install it from recovery. However it won't let me install it from the SD card.
Does anyone have any suggestions on how to save this phone?
Thanks
Hello,
i have a Huawei Honor 6X (BLN-L21):
Multitool picture while phone is connected via fastboot:
ibb.co/Ykk6DdP
I had LineageOS 14.1 installed on my phone but I was missing some of the EMUI features. I decided to go back to EMUI (EMUI5.0). Everything worked fine. After that I wanted to install Magisk with this tutorial: How to install Magisk (xda)
After flashing the zip with TWRP the phone wanted a password for decrypting. I entered my normal screen lock pin. After checking it was saying that the password ist correct but my files were corrupted. I had to click on "reset phone" which was starting something like "factory reset lowlevel" but the same issue appeared after that.
I decided to get the firmware BLN-L21C432B382 with the Firmware Finder and I am having trouble to install that. First I wiped with TWRP then installed stock recovery and stock erecovery but when I try to force install the stock firmware, the installation gets stuck at 5% and then skips all the way to 100% and restarts. After the reboot I can see the Honor boot animation but it restarts before the normal screen appears. I guess this is called a bootloop. Any suggestions about it?
PS: I already tried to use erecovery to download the right firmware but its telling me "getting package info failed"
Hi guys. I rooted my phone after purchase about two years ago using https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
I am still running the same version now
Twrp
Model: MHA-L29
Build: MHA-L29C567B183
EMUI: 5.0
Android Version: 7.0
Any one got suggestions and steps to get to a newer version. I think I need to switch back to Erecovery etc but if someone had some exact steps and a good version to move to would be great. I had thought about installing magisk but my main concern is being able to run games like Pokemon go or Mario kart and they seem to be detecting my root. Not even sure having root is worth it anymore.
I installed stock recovery and did ota updates.. working like a champ!
mpencexda said:
Hi guys. I rooted my phone after purchase about two years ago using https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
I am still running the same version now
Twrp
Model: MHA-L29
Build: MHA-L29C567B183
EMUI: 5.0
Android Version: 7.0
Any one got suggestions and steps to get to a newer version. I think I need to switch back to Erecovery etc but if someone had some exact steps and a good version to move to would be great. I had thought about installing magisk but my main concern is being able to run games like Pokemon go or Mario kart and they seem to be detecting my root. Not even sure having root is worth it anymore.
Click to expand...
Click to collapse
Did you really flash TWRP to eRecovery? It is possible but people usually (specially if not installing Magisk on EMUI 9) flash TWRP to (EMUI) Recovery - which is not the same as eRecovery
So, do two tests:
- switch off
a) disconnect any USB
- press and keep pressing Vol+
- boot by Pow
In test b), do the same but with the phone connected to charger.
If it boots to TWRP in case a), then you flashed TWRP (as usual) to EMUI Recovery.
But if it boots to TWRP in case b), then you really flashed TWRP to eRecovery
If you have stock eRecovery, then in case b), once booted to eRecovery, do not accept Install latest or Factory reset, just Reboot or Shutdown
---
If you rooted by SuperSU, find an option like Full Unroot, or google for and find a zip for TWRP for unrooting - do unroot
Maybe, there are similar options for unrooting from phhSuperUser
Do not accept any OTA yet - if it comes
---
Install Firmware Finder app (from Playstore or from its thread on XDA).
Open, it will show firmwares for your MHA-L29C567
Scroll to the bottom to find your b183. Must be FullOTA-MF or FullOTA-MF-PV (2017.03.22)
Download its update.zip file, copy to PC, unzip to get update.apk - open it by Huawei Firmware Extractor (find its thread on XDA, read how to use it)
Extract Recovery.img (if you need to restore stock Ramdisk) or Recovery2.img (if you really need to restore stock eRecovery)
Extract also Boot.img
Flash Boot.img to Boot and Recovery.img to Recovery (if restoring Recovery), from TWRP or from Fastboot (similarly as you flashed TWRP from Fastboot back then)
Or, flash Boot.img to Boot and Recovery2.img to eRecovery, if you need to restore eRecovery
Now you should have stock Recovery and stock eRecovery - both tests a) and b) must not boot to TWRP
Also, you should have stock Boot - boot to system, check with RootChecker - there must be no more root
----
Have a proper SIM card and WiFi connection, go to Settings, System, Update, go to its menu and take the option to get Full OTA package
If it doesn't give you OTA update, boot to eRecovery (option b) as above, phone connected to the charger) and take Install latest firmware and recovery. Follow by Factory reset, only then boot to system
If eRecovery also fails to update from b183, you can try to update by HiSuite - it has also an option to choose installing a firmware
---
If it still fails to update, you can download by Firmware Finder b190 FullOTA-MF-PV (2017.10.31)
Download both zip files, do not unzip, copy them as downloaded to DLOAD folder on SD card (not Internal memory)
Switch off, press and keep pressing both Vol+ and Vol-, then boot by Pow
It should update to b190, and hopefully you will start receiving OTA updates for Oreo and Pie (must have SIM card)
If not - to be cont.