Database Info

[Completed] Instructions howto install Cyanogen rom on Kingzone K1 turbo

Hii
on the Cyanogen 12.1 rom page I found the following instruction on howto install the rom.
To some of the steps, I have an answer: (in brackets)
Thank you a lot
Download the ROM (clear)
Download GApps package (clear)
Put the zip files on your SDCard (I assume on the internal SD card, not the additional one?)
Reboot in Recovery (My phone is encrypted. Do I have to decrypt/reset it in factory mode and then press power and volume down simultaneously?)
Wipe Data/Factory Reset (I assume there is a menue point with this?)
Install CM12 zip file (how is the installation started?)
Install GApps zip file (dito above)
Reboot system (clear)
Enjoy CyanogenMod 12 .

XDA Visitor said:
Hii
on the Cyanogen 12.1 rom page I found the following instruction on howto install the rom.
To some of the steps, I have an answer: (in brackets)
Thank you a lot
Download the ROM (clear)
Download GApps package (clear)
Put the zip files on your SDCard (I assume on the internal SD card, not the additional one?)
Reboot in Recovery (My phone is encrypted. Do I have to decrypt/reset it in factory mode and then press power and volume down simultaneously?)
Wipe Data/Factory Reset (I assume there is a menue point with this?)
Install CM12 zip file (how is the installation started?)
Install GApps zip file (dito above)
Reboot system (clear)
Enjoy CyanogenMod 12 .
Click to expand...
Click to collapse
Hello,
This forum is for newbies finding their way around XDA Developers.
You may post this here, It will be useful for users looking for the same.
Also, You may create a XDA account to post and reply in the forum.
Thread closed.
-Vatsal

Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]

Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]​
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.

ahmed2014011 said:
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]​
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
Click to expand...
Click to collapse
Could you please supply direct links, ppc links are not allowed on xda
Regards
Sawdoctor

[Guide] Step by Step Installation of Android Pie Custom Roms

Step by Step Installation of/Upgrade to Android Pie Custom Roms
Following this guide, you will lose all your data if haven't backed it up yet!!
Also NO USING GSI PIE!!!
Requirements:
- Twrp is already installed.
What you need:
- LineageosTWRP (Attached to thread)
- Custom Rom (can be found here)
- Open Gapps (Pico or Nano)
Only if Root is wanted: Chose either of them
Magisk(Recommended) or SuperSU
- A brain and a body
- The Knowledge that you will wipe your phone by doing this. Be Warned.
Installation:
1. Backup all the files that you have either by copying them to a usb drive ,a micro SD or your computer.
2. Check that all files are copied successfully and can be opened or viewed.
( Some apps have a cloud synchonisation feature, use it if you have it as an option since it is really helpful!)
3. Now, get your preferred rom, gapps and if wanted, your root method ready, also unzip the twrp file aswell.
Copy them to your micro SD.
4. Boot into twrp via adb or by using some app(root needed).
In Twrp, go into wipe option, then select change file system. Change file System to ext4.
4.1 Now use Twrp Reboot-Menu Option to reboot into recovery(twrp) again.
4.2 Wipe system, data, cache and dalvik-cache partitions using the Wipe option
5. Go into Install Option and Press on "Install IMG" , select pietwrp image and flash it. (The name should be lineagerecovery.img or something if downloaded via telegram)
(If you don't have it yet and are in the Lenovo P2 Telegram group, type #pietwrp in chat and make sure to safe it to your download folder. Otherwise it's also attached to this thread.)
6. Reboot back to recovery like you did in step 4.1.
7. Now install your rom and gapps.
8. Wipe cache and then reboot .
9. Setup your phone and Enjoy.
( For Root, reboot to recovery. Flash your Root Method, wipe cache and reboot)
Enjoy and thank your Devs
FAQ
Q: Instructions unclear, phone stuck in bootloop
A: Either do this:
Download this folder and use one of the two ".bat" files. Boot into Bootloader via Volume Down and Power Button. --
It will flash S048 Firmware of our Lenovo P2, after the flash-process is finished it will boot up on its own. Recommended: Do all the ota updates via ota app.
Or: Boot into bootloader, via adb cmd prompt use: fastboot boot lineagerecovery.img , then use reboot menu to reboot into twrp. Clean Wipe phone(Wipe system,data, cache and dalvik-cache Partitions) and try flashing your Rom etc. again.
Q: Instructions unclear, hardbricked my phone!!
A: Thaat shouldn't have happened. Did you screw up somewhere?...
Luckily you backed up your most important files!

[ROM][UNOFFICIAL] MIUI 9.2.2.5 for Cubot Cheetah

Hello, back again with a MIUI port.
Installation:
- Get SP Flash Tools (I used version 5.1512.0, like before)
- Download the MIUI ROM - https://mega.nz/file/h58zgChC#sH0ZxX77ydngM6O5RgNWaf2uA2k7xd58FuhLX2b0h_M
- Download TWRP (scatter file included) - https://mega.nz/#!1xUjRIiA!0aFkvFOe0...W0iagW0OlDaLlU
- Open the "MIUI 9.2.1.0 - 6.0.1" zip file, and put "boot.img" into your phone's INTERNAL storage (or your SD card) so you can find it later
- Flash the recovery through SP Flash Tools to "BOOT" partition! (If you flash it to "recovery" partition, the screen may not work)
- Reboot the device, it should boot into TWRP
- Wipe system, cache, data, dalvik cache
- Flash the ROM (and Gapps if you want, Play Store is already included)
- After it's done, go back and click "Install", then tap "Install image".
- Go to location where you put "boot.img", and flash it to "boot" partition.
- Reboot.
- Wait for it to boot (it may take 6-10 minutes or so)
Donate
If you like my work, please consider donating:
PayPal: https://www.paypal.com/donate?hosted_button_id=QYSZDSMUGQKWG
Bugs
- Let me know if there are any? I couldn't have tested much due to cracked/broken screen.
ROM OS Version: Marshmallow 6.0.1

Hello,
I have downloaded the rom. I will flash later. Thank you for the rom. unfortunately the wifi is not working

Can´t Install Any Custom ROMs Please Help [BOOTLOOP]

Hello, so, my problem is same as title says.
I´ll try to write it as short as possible.
I tried to install Resurrection Remix, Lineage OS, Arrow OS, BootLeggers ( All are unofficial builds for my Redmi 6 ), but everytime I got the constant rebooting bootloop, so I need to go to TWRP and flash Official MIUI ROM
Here are my installation steps for Resurrection Remix ( Pretty same as In this Tutorial ) :
1. - I went to TWRP ( LR. Team TWRP 3.3.1 )
2. - It was showing Internal Storage (0MB), so I click on Wipe - Format Data - yes
3. - After that also Wipe - Advanced Wipe - I selected Dalvik / ART Cache, System, Cache, Data, Vendor
4. - I moved RR Flashable .zip file and Magisk v19.3 from my PC to phones Internal Storage (via USB Cable)
5. - I clicked on Install - RR-P-v7.0.2-20200111-cereus-Unofficial.zip - Add more zips - Magisk-v19.3.zip
6. - After that, I clicked on Wipe cache/dalvik, checked if I´ve got any errors and clicked on Reboot
7. - After that, phone started to restart around every 5 seconds until I went to TWRP and Installed Official MIUI ROM
BONUS. - Tried also on second try to flash MIUI Firmware before RR .zip file, but the results were same.
Also I don´t want Gapps in my phone so i didn´t flash them.
With other ROMs it was same, always bootloop. Here are all .zips, links to forums, tutorials that I followed.
So please message me what´s the issue, especially while installing Resurrection Remix, because this is the ROM that I would like to install the most.

I know it's too late for reply I'm just posting this so that others (like myself) can see this. Lets keep the community for this phone alive!
Install MIUI V10.4.4.0 (I found that this version works for me), Disable DM verity (https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/) and finally wipe data and install your custom rom.
It will bootloop on the first boot so wait a few seconds then force reboot