Database Info

[Q] Samsum Galaxy Fit No Boot

Greetings.
It doesn´t boot.
First details:
Galaxy Fit rooted and 2.3.4 Gingerbread (worked fine)
I downloaded rom-manager and wanted to change to custom roms.
So far.
As I tried to install clockwork I found this in your forum:
http://forum.xda-developers.com/showthread.php?t=1339640
and did everything exactly written there
then restartet, started rom-manager and chose the first option (Clockworkthingy).
As there was a choice of the device, I didn´t find my device and chose the last in list (which did´t work and then I picked the first in list and accepted.
downloaded syanogen 7.0 and after download and backup-chose it told me it would reset and start in recovery ... that was the last I´ve seen from my galaxy ...
Is it broken now.
Please help!
note: tried to start recovery with vol+, home and power as well as usual way to start it. without success

Come on. Some of you Guys are able for sure to tell me, if it is hopeless or there IS something I can do to get it working again.
I know nearly nothing about Smartphones and stuff so
Please!

Rodsengard said:
Come on. Some of you Guys are able for sure to tell me, if it is hopeless or there IS something I can do to get it working again.
Please!
Click to expand...
Click to collapse
Sorry to say that your phone is bricked.
First, rom manager doesn't support your device.
Second, you are an idiot that you selected unknown device from list to make it work.
Third, the thread doesn't have any tutorial about rom manager it is CWM that is meant to be flashed using odin.
Fourth, I probably this is hard brick and nothing can be done.
IN MY VIEW GO TO THE SAMSUNG SERVICE CENTER AND TELL THEM THAT YOU LEFT YOUR FOR CHARGING OVERNIGHT AND ITS NOT BOOTING.
THEY WILL SURELY HELP FOR FREE AS THEY DON'T KNOW WHAT YOU DID AND THIS IS AN APPROPRIATE REASON.

Thank you for your honesty.

Your phone still can be fix up. Your phone not brick yet.. Your phone might get bricked if it running out of battery during flashing, like a half way flashing, then you are in the worse case scenario.
Recovery mode unavailable? Forget about recovery since it has been.broken. What important now is to get access to download mode by pressing vol down + power + home key. If you can access download mode, then your phone can be fixed in 5min.
Read this, before you go any further, if you sure that you already successfully flashed any rom before it went brick. Just do this simple step, for cm7, u need siyah kernel, go download (siyah 2.1.1 .tar)... Not .zip.
Remove your battery then put it back, get into download mode then flash siyah 2.1.1 with Odin 1.85.if your phone already flashed cyanogenmod7, then your phone should boot up and work properly.
If it doesnt work, click the link on my signature, follow all steps provided tp get back your to work as stock. Then start flashing again.
Ps : dont use backup, dont use romanager.
Sent from my GT-I9100 using xda premium

My guide is for SGS2 International. Not ATNT, please find stock rom for your phone version. But the flashing method are just the same..
Sent from my GT-I9100 using xda premium

Thank you for your efforts neobirdrio, but as I wrote above, nothing works.
No combination with vol+ or - and the 2 other HW-Keys.
But if we are still in Topic, what exactly do I have to do with an intact Galaxy fit to flash it to a custom ROM.
What Custom ROMS would run with it?
Where Do I get the Newest Version?
And is it worth changing it?
I wanted something special, something faster than Gingerbread and (of course the original Froyo on it), including something needs less Space.
Could you advice me?
(I ordered a new one swince it happened)

Try read this post,
http://forum.xda-developers.com/showthread.php?t=1120880
Latest stock firmware for galaxy fix is 2.3..which is gingerbread.
Sent from my GT-I9100 using xda premium

Still trying this out.
Did it in this way press three Keys, push batery in and so on ... One time on my netbook it came to life by meaning system told me, that it installs driver (seemed to be recognized right) and ODIN told, there is a connection. I started ODIN (which was prepared to do Gingerbread onto it) But it did nothing. I am not sure if I startet Odin with Adminrights, soooo ... Do now backup of the partition, put a much earlier backup on my PC and try it again (I am running out of PCs, so I simulate, that this is a new Computer )
I keep you informed.
Thanks again so far.

Tried it again, but it didn´come back to life
So Thanks to all ppl helped me.

[Q] [Root] Messed it up my phone

Okay, I couldn't find an answer I was looking for anywhere else; I'll try and keep it brief:
I am new to android. I rooted my Straight talk Galaxy SII with cyanogen mod 10.1, and everything went fine with it, no problems so far.
I introduced my friends to the wonders of rooting, and feeling unconfident in his own abilities, he gave me his Verizon Galaxy SIII for the night for me to root for him.
In short, I messed it up and now every time I try to turn it on or enter recovery mode, it gives me a yellow triangle, and says "Verizon has identified software on your device that is not approved, please bring it in to your Verizon store for help." or something along those lines.
I am done trying to root it now, because I do not want to mess anything up and just want to get it back to 100% factory stock so I don't have to pay for a new $700 phone....I tried following this ( http://forum.xda-developers.com/showthread.php?t=1840030 ) guide to reset the phone, but the link to the Root66.tar is not available anymore because Mega Share is gone, and when I downloaded the torrent, and tried to extract it with 7-zip, 7zip tells me into can't enter the archive.
I was wondering if anyone knew of that file located somewhere else where I can grab it myself (I already googled it) or if anyone has a better, simpler alternative to get this phone to factory stock?
I can still get into download mode, by the way, I just can't get to the home screen, or boot into recovery mode.
ANY help is greatly appreciated, I have already chewed off all my fingernails and am quite scared I completely trashed the phone. I don't plan on messing with any of this anymore after this.

Lol you'll be fine. You're seeing this warning because you didn't unlock the bootloader depending on how you rooted the phone. Use Droidstyle's guide in the dev section and Odin flash stock image of either VRALG1 or VRBLK3. It formats /sdcard btw.
Sent from my SCH-I535 using xda app-developers app

Installed New update, soft brick. Need an official signed rom

Anyone know of, or or have a link to a factory rom (hell any rom would do at this point) that I would be able to flash with the stock S3 recovery? Just trying to unbrick my phone. Story of what happened below:
I'm running stock 4.1.1 rooted touchwiz. I wake up this morning to a notification saying I had an update on my phone. Should have definitely waited but without thinking I went ahead and updated, which of course soft bricks? The phone. (boots up, and but hangs at the 4Glte, flash screen)normally this would be an easy fix, I could Odin back to stock or something but I'm down in Mississippi till Monday for training and do not have access to my pc.
I can access the factory recovery on the phone but that's it, have no clue where CWM is. I've tried flashing some backups but the factory recovery says that it's not a signed package or whatever. Anyone have any idea how I can get this sucker booted up and running using just an android tablet?
What about reflashing CWM so I can access my backups? Could I somehow flash CWM with factory recovery?:

Dr. Light said:
Anyone know of, or or have a link to a factory rom (hell any rom would do at this point) that I would be able to flash with the stock S3 recovery? Just trying to unbrick my phone. Story of what happened below:
I'm running stock 4.1.1 rooted touchwiz. I wake up this morning to a notification saying I had an update on my phone. Should have definitely waited but without thinking I went ahead and updated, which of course soft bricks? The phone. (boots up, and but hangs at the 4Glte, flash screen)normally this would be an easy fix, I could Odin back to stock or something but I'm down in Mississippi till Monday for training and do not have access to my pc.
I can access the factory recovery on the phone but that's it, have no clue where CWM is. I've tried flashing some backups but the factory recovery says that it's not a signed package or whatever. Anyone have any idea how I can get this sucker booted up and running using just an android tablet?
What about reflashing CWM so I can access my backups? Could I somehow flash CWM with factory recovery?:
Click to expand...
Click to collapse
first of all you can't flash anything on a stock recovery hence the need of a custom recovery. Second you don't accept the OTA when rooted as it can cause the exact issue that you have. Last there isn't a way to fix your problem via another android device that I know of.

U are going to need a pc and then u will need to download Odin http://forum.xda-developers.com/attachment.php?attachmentid=1165122&d=1340993443 and u can get the official software from here on XDA http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html this is the 4.1.1 software. Here is a link to some official pre rooted software http://forum.xda-developers.com/showthread.php?t=1984436 all of these software's you can install though Odin just look up here on XDA on how to use Odin and you will be fine once your phone is up and running again then you will need to get you a custom recovery. Then you can access your backups.

Always_Jonezen said:
U will need to download Odin http://forum.xda-developers.com/attachment.php?attachmentid=1165122&d=1340993443 and u can get the official software from here on XDA http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html this is the 4.1.1 software. Here is a link to some official pre rooted software http://forum.xda-developers.com/showthread.php?t=1984436 all of these software's you can install though Odin just look up here on XDA on how to use Odin and you will be fine once your phone is up and running again then you will need to get you a custom recovery.
Click to expand...
Click to collapse
He doesn't have access to his PC PLUS he already knows what to do on that end.

jmxc23 said:
He doesn't have access to his PC PLUS he already knows what to do on that end.
Click to expand...
Click to collapse
Just trying to help out but of course someone always has to criticize. I don't see you giving him any advice.

Thanks for all of advice guys. I'll prob just wait it out till Monday. Thanks again.

Always_Jonezen said:
Just trying to help out but of course someone always has to criticize. I don't see you giving him any advice.
Click to expand...
Click to collapse
He was asking if he can use an android tablet to fix his phone. He doesn't have access to PC at least until Monday it says so in his post. I wasn't even criticizing you at all. Unless he knows someone with a PC in Mississippi or someone here knows how to use one android device to flash something on another android device he sadly will have to wait until he gets home to fix his phone. You didn't do anything to be criticized for trying to help all I did was point out the info that you missed without personally attacking you making it a critique.

jmxc23 said:
He was asking if he can use an android tablet to fix his phone. He doesn't have access to PC at least until Monday it says so in his post. I wasn't even criticizing you at all. Unless he knows someone with a PC in Mississippi or someone here knows how to use one android device to flash something on another android device he sadly will have to wait until he gets home to fix his phone. You didn't do anything to be criticized for trying to help all I did was point out the info that you missed without personally attacking you making it a critique.
Click to expand...
Click to collapse
hey all, I've been reading , downloading etc for hours trying to get back into my GS3.. i was as usual roaming around and saw a post that said something to this effect "do ya need to get back to stock?" and figured yes i need to so i jumped in with both feet ..i had my boot loader unlocked and for some reason locked the darned thing remembering it was locked before i rooted and then i get the screen that says ie: "System software not authorized ~~~~~~~~~~~~" with a yellow triangle over it with an "!" mark in it..
all would have been ok except the line up of the way to do things was kinda outta line.. after i had locked bootloader "which is the way the GS3 came" i thought. at any rate i am now where i said i was and if i can be helped it would be appreciated.. and no repeated.. next time i'll read their whole line up first.. so help me if ya can and i am game right now for about anything ..

[Q] ok what can i do?

I rooted mu Samsung galaxy avant it was my first root I thought I had the twrp installed and backed up so I was playing with some diff roms well one blew my picture up huge like the phone thought it was a galaxy note but still had avant actual screen sze so I couldn't do anything tried to restore with the trwp an it wouldn't change just stayed the same so I was able to navigate my way to factory data reset and its still doing it only now I cant even open it up all the way and get into my phone cant click agree on a permission agreement page right after wifi page so what if anything can I do? ive tried to reboot in recovery nothing worked tried everything even rooted my wifes exact same phone installed the recovery right this ime put it on the sd card an tried rebooting threw that and it reboots works and just goes straight to the same start up screen. im getting really frustrated can anyone please help!!! im willing to donate very nicely to the first person that can walk me threw doing this myself or send me a file what ever it take first person that gets my phone back up and running im going to donate to u it means allot to me and I need help asap

Follow the instructions in the rooting guide it's really easy to flash the stock ROM and start from scratch.
Sent from my SM-G386T1 using XDA Free mobile app

[Q] Messed up rooting hoping to find a fix

I recently got my Samsung Galaxy S6 and decided to root and install TWRP for a custom rom. I was able to root the phone and then installed their android app. TWRP Manager (ROOT).
After that I went to the app and one of the sidebars labeled install TRWP on the app then to the codename zeroflte for the Samsung Galaxy S6. It told me to restart my phone and I did but after that I was not able to use my phone again. Whenever I would turn on my phone it would show the normal Samsung s6 screen with a unlock picture and the words custom underneath. After that it would display a turquoise color screen with a words
Start Up Failed. Your device didn’t start up successfully. Use the Verizon Software Repair Assistant on a computer to repair your device.
I tried to google and see if anyone had a similar problem but nothing popped up. I don’t know where to find a copy for the Verizon Software Repair Assistant for the Galaxy S6.
I also tried and factory reset the phone or anything but the only combinations of buttons that would work on my phone were the down volume + power button. It gave me a list of options including factory reset but every option that I chose would lead me back to the same screen. The turquoise screen saying Start Up Failed.
Any help would be great. I don’t know what to do now. Tomorrow I am going to down to a local repair store and see what they can do. But if you know of anything that would be great. Thank you for your time and have a nice day.

inolil said:
I recently got my Samsung Galaxy S6 and decided to root and install TWRP for a custom rom. I was able to root the phone and then installed their android app. TWRP Manager (ROOT).
After that I went to the app and one of the sidebars labeled install TRWP on the app then to the codename zeroflte for the Samsung Galaxy S6. It told me to restart my phone and I did but after that I was not able to use my phone again. Whenever I would turn on my phone it would show the normal Samsung s6 screen with a unlock picture and the words custom underneath. After that it would display a turquoise color screen with a words
Start Up Failed. Your device didn’t start up successfully. Use the Verizon Software Repair Assistant on a computer to repair your device.
I tried to google and see if anyone had a similar problem but nothing popped up. I don’t know where to find a copy for the Verizon Software Repair Assistant for the Galaxy S6.
I also tried and factory reset the phone or anything but the only combinations of buttons that would work on my phone were the down volume + power button. It gave me a list of options including factory reset but every option that I chose would lead me back to the same screen. The turquoise screen saying Start Up Failed.
Any help would be great. I don’t know what to do now. Tomorrow I am going to down to a local repair store and see what they can do. But if you know of anything that would be great. Thank you for your time and have a nice day.
Click to expand...
Click to collapse
Have you tried to Odin back to stock?
http://forum.xda-developers.com/verizon-galaxy-s6/development/5-15-stock-odin-tar-t3109676

Ya, you'll need to odin back to stock like he said. And TWRP isn't available for our phone since we don't have an unlocked bootloader. Do not try and install TWRP again. You'll want to use Flashfire if you need to flash anything.

brholt6 said:
Ya, you'll need to odin back to stock like he said. And TWRP isn't available for our phone since we don't have an unlocked bootloader. Do not try and install TWRP again. You'll want to use Flashfire if you need to flash anything.
Click to expand...
Click to collapse
Awesome thank you

I need help!
I did the exact same thing with my Galaxy s6, i tried to do the same thing with my newly acquired root, I am very new but very interested in rooting and customizing my phone, when I plug my phone into a computer it only pops up with the start up failed screen, I installed the odin thing but i have no clue where to go from here and any assistance would be greatly appreciated. thank you

Bubblegum Mage said:
I did the exact same thing with my Galaxy s6, i tried to do the same thing with my newly acquired root, I am very new but very interested in rooting and customizing my phone, when I plug my phone into a computer it only pops up with the start up failed screen, I installed the odin thing but i have no clue where to go from here and any assistance would be greatly appreciated. thank you
Click to expand...
Click to collapse
Keep in mind XDA is a community for developers by developers. People are also willing to help, but you got to put forth your own effort. You will get ignored if you think people on this site are going to act as free tech support. Your question is posted just a few posts down from a link to the process on using odin to return to stock. You need to just follow those instructions. If you don't understand a step then Google it. I'm saying this because I noticed you joined XDA to ask this question. Or at least it's your first post. You will make a lot of enemies here if you don't take the time to read and research things before posting.

HELP
I have the same problem (Start up failed) but ODIN is not working for me... I am using the stock firmware for the GS6 edge and it says failed... what should I do?

Bee Funny said:
I have the same problem (Start up failed) but ODIN is not working for me... I am using the stock firmware for the GS6 edge and it says failed... what should I do?
Click to expand...
Click to collapse
If you have an edge you should use their forum. It's different than the GS6.

Just had to Odin my Verizon S6 (sm-g920v) to get it back to factory defaults.
I've been rooted for months with no issues and have known my bootloader was locked with no nice way around it but then i read some stupid guides saying to go get twrp manager to load custom roms on the Galaxy s6 phones and they even included the sm-g920v model number. I went to the app store, downloaded twrp manager, followed the first few steps, rebooted and that was that. Could not boot up anymore without Start Up Failed. A few checks and warning would have been greatly appreciated from the app developers but oh well.
Well that was fun. Now to redo everything on my phone.

Oooah said:
Just had to Odin my Verizon S6 (sm-g920v) to get it back to factory defaults.
I've been rooted for months with no issues and have known my bootloader was locked with no nice way around it but then i read some stupid guides saying to go get twrp manager to load custom roms on the Galaxy s6 phones and they even included the sm-g920v model number. I went to the app store, downloaded twrp manager, followed the first few steps, rebooted and that was that. Could not boot up anymore without Start Up Failed. A few checks and warning would have been greatly appreciated from the app developers but oh well.
Well that was fun. Now to redo everything on my phone.
Click to expand...
Click to collapse
Same exact crap just happened to me. I was running CleanRom Lite....thought I could use TWRP...some times I do stupid things...should have just stuck with FlashFire.

I've tried odin back to stock, it keeps failing. it says nand write fail and it stops. I've tried many different times. I've run Odin 3.10.6 and 3.10.7 I have the latest drivers, it recognizes the device but it will not load anything via odin. I've tried on two different computers as well.

...

Gizmoe said:
...
Click to expand...
Click to collapse
I have a Galaxy s6 edge btw. Not much info on the edge, in desperation, I'm combing thru galaxy s6 forums seeking answers. I have been rooted for awhile. I wanted to turn off the nagging volume warning so I downloaded a zip file to flash but only to find that my twrp recovery was no longer there. So I try to download twrp and flash. Now I'm in a boot loop with the turquoise screen telling me to use a verzion tool to reset the device. Klies says my phone isn't compatible as well as smart switch. Odin fails every time after NAND WRITE. I'm about to microwave this crap and get new phone.

keith7120 said:
I have a Galaxy s6 edge btw. Not much info on the edge, in desperation, I'm combing thru galaxy s6 forums seeking answers. I have been rooted for awhile. I wanted to turn off the nagging volume warning so I downloaded a zip file to flash but only to find that my twrp recovery was no longer there. So I try to download twrp and flash. Now I'm in a boot loop with the turquoise screen telling me to use a verzion tool to reset the device. Klies says my phone isn't compatible as well as smart switch. Odin fails every time after NAND WRITE. I'm about to microwave this crap and get new phone.
Click to expand...
Click to collapse
Did you ever get your phone up and running? I ran into similar issue with odin. After looking around on web I found a forum that mentioned using an older version of odin.
---------- Post added at 06:50 PM ---------- Previous post was at 06:44 PM ----------
Fe Mike said:
Did you ever get your phone up and running? I ran into similar issue with odin. After looking around on web I found a forum that mentioned using an older version of odin.
Click to expand...
Click to collapse
Sorry I saw you tried other odin versions 3. 10.x, I meant going lower. 3.09 is recommended for jb/kk but that worked for me.