Hey nerds,
Could you please help with step by step guide on how to go back and change my UK firmware XT 1032 (for MOTO G) to the normal XT1033 firmware.
I changed my MOTO G XT1033 to XT1032 as was given proper instructions on the web however when I tried searching for instructions going back to XT1033 I didn't find any proper instructions. Please help. I'm kinda in a hurry as I want to sell this phone and need both the sims card tray working.
PS: I have already downloaded the firmware "fastboot_falcon_asia_ds_user_4.3_14.10.0Q3.X-84-7-LCG-4_4_release-keys-cid7-AsiaRetail_03.tar" and per instructions found in the net I got this message
Waiting for fastboot enumeration...
Fastboot device is ready!!
Flashing GPT and bootloader images...
Executing ".\Windows\fastboot.exe flash partition gpt.bi
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.032s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.456s
.\Windows\fastboot.exe flash partition gpt.bin failed!!
And over the phone this is the message:
Fastboot Reason: UTAG "flashfail" configured as fastboot USB connected
cmd: getvar:max-sparse-size
cmd: download:00008000
cmd: flashartition
version downgraded for primary_gpt
Please help. I'm really desperate.
Will keep a lookout for your reply.
You are flashing 4.3 firmware on 4.4, downgrading doesn't work and might even brick your boot loader!
Try this firmware (it has different flashing instructions)
http://www.filefactory.com/file/3t4v75yvhrd5/RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
Itried unlocking, But after entering the unlock code, i got this error:
(bootloader) Failed to erase partition
(bootloader) General Unlock failure!
(bootloader) OEM unlock failure!
FAILED (remote failure)
After that my screen went blank and i unplugged my device. On boot up it did show that the bootloader is unlocked. Also my phone was formatted as it was supposed to be.
In fastboot menu also it does show : "Device status: unlocked"
What does all of those failed messages mean then?
My moto x does not leave the fastboot screen it only shows:
downgraded security version
update gpt_main version failed
Failed to hav check for gpt_backup: 0x35
CID Read Failure
Invalid CID status 0x69
CustomerID erros. Contact Dealer: Oxdead
No SP partition found
Fastboot Reason: Invalid CID
Please help me!
Hi
Thanks for writing to us at XDA Assist. Which generation of the Moto X do you have?
No response in two days, thread closed.
Hello,
My phone got stuck on the bootscreen showing this message:
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup
failed to load gpt
CDI Read failure
Invalid CID status 0x69
No SP partition found
Fastboot Reason: Invalid GPT
Can you help me?
i have rog 5 firmware WW-18.0840.2111.196
i was rooted the device morning and switching the fingerprint to WW after that i did factory reset and used wrong bootloader.img not for the firmware version
the problem that i locked the bootloader using (fastboot oem asus-csc_lk) when i turned the phone it's just stucked on fastboot
even when i tried to go to recovery mode will back again to fastmode
i tried eld not working at all
qualcom app not connected
the only way i think to flash it with stock fimware but the problem i got when i tried with WW_ZS673KS_18.0810.2101.95_M2.13.24.9-ASUS_1.1.46_Phone-user.raw
the fastboot.exe failed this is the message
"FAILED, fastboot.exe flash all WW_ZS673KS_18.0810.2101.95_M2.13.24.9-ASUS_1.1.46_Phone-user.raw failure, EXIT!"
if anyone has any idea i waste 12 hours without progress
even i tried to open the bootloader through adb but i can't
plz help
fastboot flashing unlock
...
FAILED (remote: permission denied)
finished. total time: 0.006s
still almost 16 hours working the new code is after flash_all
fastboot: error: CID () mapping the wrong XROM (0x1)
Currently it's likely that you'll never be able to unlock BL again after manual relock.... I suppose you can try extract the Bin file and fastboot sent each one of them over
Code:
fastboot flash <partition name> <partition file>
, it will be a long process but guaranteed to work
Flash all command is always sketchy in most cases....
If you want I can dump the fw for you
thanks for repalying this is the code
sending 'c' (37614 KB) OKAY [ 1.143s]
[FB] Writing 'c' FAILED (remote: 'Flashing is not allowed in Lock State')
fastboot: error: Command failed
any possible way ?
Finally after hard working it solves ، phone working well , thanks for @johnny886 who advised to me the code.
The code problem :
fastboot: error: CID () mapping the wrong XROM (0x1)
The fastboot works with this command
The working code is:
fastboot -v flash all xx.raw
Thanks to you @yurishouse for your help
messhary said:
Finally after hard working it solves ، phone working well , thanks for @johnny886 who advised to me the code.
The code problem :
fastboot: error: CID () mapping the wrong XROM (0x1)
The fastboot works with this command
The working code is:
fastboot -v flash all xx.raw
Thanks to you @yurishouse for your help
Click to expand...
Click to collapse
bro can u also help me please i am also stuck with the same problem u faced
Try this command
fastboot -v flash all xx.raw
Xx.raw change it with the file path
messhary said:
Try this command
fastboot -v flash all xx.raw
Xx.raw change it with the file path
Click to expand...
Click to collapse
no working brother
Can you tell me what's the error code
messhary said:
Can you tell me what's the error code
Click to expand...
Click to collapse
yes wait
getvar:version-bootloader FAILED (remote: 'unknown command')
getvar:version-baseband FAILED (remote: 'GetVar Variable Not found')
getvar:serialno FAILED (remote: 'unknown command')
--------------------------------------------
fastboot: error: ANDROID_PRODUCT_OUT not set
yurishouse said:
Currently it's likely that you'll never be able to unlock BL again after manual relock.... I suppose you can try extract the Bin file and fastboot sent each one of them over
Code:
fastboot flash <partition name> <partition file>
, it will be a long process but guaranteed to work
Flash all command is always sketchy in most cases....
If you want I can dump the fw for you
Click to expand...
Click to collapse
I relocked my bootloader sent it in for repair got it back unlocked it again no issues
chairman011 said:
I relocked my bootloader sent it in for repair got it back unlocked it again no issues
Click to expand...
Click to collapse
by offical service center?
Hi I unlocked my rog phone 5, did payload dumper, sent to magisk, back to pc, then fastboot flash boot <img from pc>. Now the phone won't get past recovery screen. Any way I might fix this so it boots to OS or a way to start over?
Nm had it plugged into bottom usb port, need to use the side usb port.