Itried unlocking, But after entering the unlock code, i got this error:
(bootloader) Failed to erase partition
(bootloader) General Unlock failure!
(bootloader) OEM unlock failure!
FAILED (remote failure)
After that my screen went blank and i unplugged my device. On boot up it did show that the bootloader is unlocked. Also my phone was formatted as it was supposed to be.
In fastboot menu also it does show : "Device status: unlocked"
What does all of those failed messages mean then?
Related
I cant unlock the boot-loader because it sayd the password is wrong
I gave moto the code i got from fastboot oem get_unlock_data
whitch retuned this:
Code:
(bootloader) A000002CE5E9CC00#54413936353043
(bootloader) 38485500585431303331000000#236B
(bootloader) D082967F45C8B0297B92C52C7DBCF8D
(bootloader) 774E9#A1AC35030F000008000000000
(bootloader) 0000000
the email returned with the unlock code:
Code:
6OJPYDKQQXR2DMSL5UHU
but the bootloader is rejecting it saying
Code:
(bootloader) Password incorrect!
(bootloader) OEM unlock failure!
FAILED (remote failure)
finished. total time: 0.316s
what do i do?
Trying a different code. Still failed.
tried again from a diffrent PC and got a diffrent code...
Code:
ROV6AISPVK4CMKGSMLDR
but still replied as werong
I had the same problem. I solved it by following the instructions in this zip. It involves upgrading the bootloader, unlocking, then downgrading it.
I Flash TWRP & CM 12 earlier everything works well...but one day I back to stock ROM which also locked the bootloader. Then I try to unlock the bootloader with earlier unlock code but it giving error like
(bootloader) Failed to erase partition
(bootloader) General unlock failure!
(bootloader) OEM unlock failure
FAILED (remote failure)
finished. total time: 10.212s
Hello, I have a Moto G 2013 XT1032 which previously had the bootloader unlocked, but I decided to re-lock it so I could update my phone to Lollipop 5.1, but now I want to unlock it again and I cant.
It shows me this message:
(bootloader) Failed to erase partition
(bootloader) General Unlock failure!
(bootloader) OEM unlock failure!
FAILED (remote failure)
finished. total time: 10.244s
What should I do?
Folow these intructions:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Hello, due to an coruppted bootloader/cache/data point in my schield tablet i tried to doe fastboot
fastboot oe lock.
It was previously unlocked, somehow i read somewhere that relocking can fix corrupted bootloader of data partitions.
But when i try to relock it with fastboot oem lock i get
D:\nvidia\image>fastboot oem lock
...
(bootloader) Showing Options on Display.
(bootloader) Use device keys for selection.
(bootloader) Locking...
FAILED (remote: ()
finished. total time: 3.905s
Can someone please help me
Did you try with fastboot oem relock ?
Yes i did but get failed unkown error when i do
Hello,
So I have been using my Shield Tablet just fine for the past few years but now its locked on the Nvidia logo when it boots up, I've tried going into recovery mode to factory reset but then it just hangs on "No Command" I noticed that the bootloader is locked so I got ABD and fastboot. Once I setup the tablet to register in fastboot devices, I then use 'fastboot oem unlock' like it says to from the Nvidia support forums, but it fails and gives this command. Can anyone help me out to figure out what is wrong?
.... > fastboot oem unlock
(bootloader) Showing Options on Display.
(bootloader) Use device keys for selection.
(bootloader) erasing userdata...
(bootloader) erasing userdata done
(bootloader) erasing cache...
(bootloader) erasing cache done
(bootloader) unlocking...
FAILED (remote: '(')
fastboot: error: Command failed
Any advice would be helpful
Malzra said:
Hello,
So I have been using my Shield Tablet just fine for the past few years but now its locked on the Nvidia logo when it boots up, I've tried going into recovery mode to factory reset but then it just hangs on "No Command" I noticed that the bootloader is locked so I got ABD and fastboot. Once I setup the tablet to register in fastboot devices, I then use 'fastboot oem unlock' like it says to from the Nvidia support forums, but it fails and gives this command. Can anyone help me out to figure out what is wrong?
.... > fastboot oem unlock
(bootloader) Showing Options on Display.
(bootloader) Use device keys for selection.
(bootloader) erasing userdata...
(bootloader) erasing userdata done
(bootloader) erasing cache...
(bootloader) erasing cache done
(bootloader) unlocking...
FAILED (remote: '(')
fastboot: error: Command failed
Any advice would be helpful
Click to expand...
Click to collapse
What happens when fastboot flashing unlock