Q&A for [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
no sound, no auto-rotate
I am fairly new to Rooting and updating my Xoom to the newest Kitkat system. I am having 2 issues as of right now. The sound has never worked no matter what the settings say, and initially the auto-rotate was functioning and suddenly it stopped.
I have checked all options/setting and see nothing that should explain either of these 2 issues. I also didnt add any new apps in the time from initial update to the auto-rotate not working so if anyone has any suggestions or ideas, it would be greatly appreciated.
Again I am fairly new to all this, so the simpler or more detailed the potential solution the more likely I will understand it.
Thanks.
No sound on Omni 4.4 cmda version
I love the rom, only problem is I have no sound on the cmda version. I read the comments and saw people suggest install the top rom version over the bottom and then reflashing gapps. Should have sound. When I do this tablet boots but keeps giving me error "Unfortunately, the process com.android.phone has stopped" I say ok but it keeps coming up and wont let me get any further. Any suggestions?
volume issue
Anyone know how to fix the no sound issue in omni rom 4.4.4 stingray cdma? I cant get any sound at all. Help would be appreciated.
Took a couple go's but now up and running 4.4.2!
Thank you!
First time I've moved from the standard stock implementation, never even rooted the device before, but a couple attempts and following your instructions I managed to install BigPart, Flash omni-4.4.2-201XXXXX-everest-HOMEMADE_XXXX.zip, gapps-xxxx.zip & UPDATE-SuperSU-v1.86.zip.
I was about to give up on the Xoom and buy something newer, Tab S or something, but this appears to have put new life back into the old Xoom!
Followed the instructions above, but could not get it to clear Dalvik, failed every time. In the end I bit the bullet and formatted the internal drive, then flashed again - worked like a charm - figured since I was going to pass it over for a new one or this was going to work I had little to lose. As it happens I now seem to have it back & working well.
Now have bunch of apps back installed and trying them all out, so far most appear to be fine; though Google maps crashes whenever I zoom in too far.... less than a country level, I don't mean excessively far - thoughts?
Blackdogn3 said:
Now have bunch of apps back installed and trying them all out, so far most appear to be fine; though Google maps crashes whenever I zoom in too far.... less than a country level, I don't mean excessively far - thoughts?
Click to expand...
Click to collapse
Google Maps v9+ has problems on the Xoom with all the different custom ROMS (Omni, CWM, EOS, etc). You need to downgrade to Maps v8.4.1 to get it to work.
slow1234 said:
Google Maps v9+ has problems on the Xoom with all the different custom ROMS (Omni, CWM, EOS, etc). You need to downgrade to Maps v8.4.1 to get it to work.
Click to expand...
Click to collapse
Thanks as said a newbie! Downgraded and working fine - thanks for quick reply
Blackdogn3 said:
Thanks as said a newbie! Downgraded and working fine - thanks for quick reply
Click to expand...
Click to collapse
It has also been noted that 9.2.0 is rolling out and that it works on the Xoom. I updated yesterday and did a quick check - it does appear to work fine!
No Sound
After I flashed "[ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart." onto my Verizon Motorola Xoom 4G Tablet,
I have no sound at all and also the auto-rotate feature does not work (stays locked in portrait mode until reboot).
A number of other forum members have posted the same problem. Can we get a solution from someone on the forum?
have all but twrp v 2.6.3 big part
I have every thing I need except big part v2.6.3, none of the links I've found work? Does it have to be v2.6..3. ? There seem to be updated versions?
No 3g or 1x fallback
Install this today, everything went ok, execpt i could not get verizon 3g or 1x service. 4g works fine, when i have coverage. SBF back to stock again i guess.
e:unable to mount '/cache
The process for flashing the xoom (stingray model) seems somewhat straightforward. Yet I can't seem to get a working flash from the effort. Two problems:
1) during the "wipe this and that" stage while running in recovery, I get "FAILED" for each of the requisite areas to wipe, along with other messages such as that in the title. while i find a handful of other posts within this forum from folks experiencing the same problem, i find nothing in response with useful suggestions to fix what's apparently broken;
2) the tablet boots up to the OMNI splash-screen, and that's it.
I've repeated the steps at the head of this thread umpteen-zillion times. But the result is the same after each attempt. Either some critical step (or two) is/are missing from the initial (and horribly written) description, or I have the most stubborn tablet built.
i haven't bricked the thing... i can access it via adb, and i can get into recovery with no issues. what i can't seem to do is:
1) find a TWRP download using the links provided that doesn't trip quarantine due to virus detection; or,
2) find a coherent set of instructions that correctly describe the logical flow of the process of flashing a ROM on a Xoom.
Suggestions?
CDMA Voice and data programming
Hi,
Thanks for your effort and excellent work but I need some help, The main thing i want to try, is to get back my CDMA signal because since i tried the stock rom 4.1.2 i was not able to get any Data working there, my xoom is a just CDMA with no sim or LTE upgrade and i already tried 2 basebands on it the one with the last version of the stock room and the one that gets installed with the IMML update but no luck, if by any chance you have the first baseband it would be great i guess its something like 2.00.
Another question that I have is related to BP tools or programming the Cdma xoom, every time I try to start in bp tools I was not able to see the utility, just today i tried to connect to my PC and its not able to connect to CDMA Workshop or QPST, is there a way to do that? i need to activate something? any idea would be great!
And would be great if you have any MZ600 SBF where has included the first baseband 2.00 'cause probably it will help me to recover my 3g data (it's the only thing i didn't find and try).
Thanks!!!
is this have a default calling future like any mobile?
Thank You to OmniRom for xoom devolopers (all of you)
I just wanted to post a thank you to all of the developers of the omnirom for xoom. I was able to install it tonight, with a couple soft brick scares, but it is up and ruining. I love my xoom and am very appreciative.
Thanks....Steve
Xoom OnmiROM freezes
I've got a similar problem to the problem outlined in this post. My son also has seen it on his Xoom.
When it becomes unresponsive (either on the dock or not), the only way I can recover is to hold the volume up and the power button until the tablet reboots. To me, it appears it goes into a deep sleep that the power button alone can't wake it up from.
There seems to be no set time period that the tablet has to be up before it hangs. Sometimes I can set it down for an hour and other times it's still responsive the next day.
semi-anonymous said:
I've got a similar problem to the problem outlined in this post. My son also has seen it on his Xoom.
When it becomes unresponsive (either on the dock or not), the only way I can recover is to hold the volume up and the power button until the tablet reboots. To me, it appears it goes into a deep sleep that the power button alone can't wake it up from.
There seems to be no set time period that the tablet has to be up before it hangs. Sometimes I can set it down for an hour and other times it's still responsive the next day.
Click to expand...
Click to collapse
It's not real common for this to happen, but this same issue does occasionally happen on the CyanogenMod 11 Rom also. Other than this, and the workarounds to do a few other things in Android 4.4.4, the Xoom has been a real God send that is just amazing.
Non-Functioning Sensors post-flash w/Omni Stingray
Finished flashing XOOM 4G with (in order listed):
Xoom-Universal-Root
R.A.H._TWRPv2.6.3
omni-4.4.4-20141130-1816+0100-stingray_cdma-HOMEMADE
pa_gapps-modular-pico-4.4.4-20150215-signed
UPDATE-SuperSU-v2.45
After I noticed that the auto-rotate didn't work, I downloaded "My Android Sensors" from the Play Store. It shows the NO sensor is working. What gives..?
Looking for file EOS-Stingray-imm76l-radios-update.zip
Hi all,
Can someone help with the file ?
EOS-Stingray-imm76l-radios-update.zip
Thank you
The Rom works great.
I installed it month ago and it is working fine.
Batterylife is perfect and all things are working.
Thanks
Hello,
I have Hisense Sero 7 pro tablet for almost 2 years, and it has served me well until I recently gave it to my 2y daughter, and now it has started freezing I have tried reinstalling different ROMs versions (DOPA 4.4.4, 5.0, etc.) but it seems that stock ROM 4.3 is most stable one. I have also noticed that using the stock rom my Sero Pro freezes when I go to Wifi settings screen, or enter wifi password (for non-stock ROM I have not noticed any particular pattern/reason for freezing). Then the screen goes blank (sometimes light is working, sometimes not), and I need to hold power button for a few seconds for a complete shutdown and then I can turn it on.
Now I have watched a few movies from SD card using standard video player and it was working fine, so I believe this issue is isolated to wifi related activities only. Maybe someone had a similar problem (as I believe this is not limited to those particular tablets). Is there a way to fix it? Any ideas are welcome. Thanks!
Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
Hi... hoping to get some help on something that's driving me nuts. First, the usual disclaimer: I'm sorry if this is not the right area for the inquiry or if this was previously answered elsewhere, I've been looking for information all afternoon with no luck.
The issue: this is the Mrs' phone, my old LG Optimus G on a stock kitkat 4.4.2 rom (yes, a dinosaur, but an awesome dinosaur that keeps going at it perfectly). It displays a Data network warkning (see attached image) when switching from wifi to data which I think is standard. However it is unbelievable bothersome. There is a setting within mobile networks to untick a box if I don't want to see this displayed, however once I untick, and exit the setting doesn't save, I go back in and it's back to being ticked. Is there any way on this green earth to stop these warnings or to make that setting stick? It's rooted and I have no problem going in to a file and editing if that's what it takes.
Thanks to any one that can help!
Hello,
If you have the international optimus G then try posting your question in the forum linked below.
http://forum.xda-developers.com/optimus-g-intl/help
If you have Sprint optimus G, post your question below.
http://forum.xda-developers.com/optimus-g-sprint/help
If you have AT&T optimus G, post your question below.
http://forum.xda-developers.com/optimus-g-att/help
Hello all. Several months ago, I updated my phone to cyanogenmod 13 following the instructions in this thread: http://forum.xda-developers.com/mot.../moto-maxx-xt1225-droid-turbo-xt1254-t3315912
At first it seemed cool. Then, randomly the cell networks would drop out and not work randomly, regardless of how good the reception was. This left my phone dangerously useless. Still I tried waiting and updating. I updated for months and the issue was never fixed. Today, I can no longer access cyanogenmod updates, or google play, over wifi. Both show connection error. I can access both fine over 3G connection ONLY. I can use internet in my browser, and the speed is great with WIFI. The WIFI is working correctly for all other apps except cyanogenmod updates and google play. I am so done with this program. It has caused nothing but trouble and is the opposite of what I wanted, ease of use and a more reliable phone. Please someone help he revert to stock. I can not find information anywhere on the problems i have been having or how to revert to stock. Right now I can not use my phone at all because I can not access google play. I tried re installing cyanogenmod, factory reset, reflashing radio and bootloader, nothing works. Please, and Thank you for any help.
colby_ said:
Hello all. Several months ago, I updated my phone to cyanogenmod 13 following the instructions in this thread: http://forum.xda-developers.com/mot.../moto-maxx-xt1225-droid-turbo-xt1254-t3315912
At first it seemed cool. Then, randomly the cell networks would drop out and not work randomly, regardless of how good the reception was. This left my phone dangerously useless. Still I tried waiting and updating. I updated for months and the issue was never fixed. Today, I can no longer access cyanogenmod updates, or google play, over wifi. Both show connection error. I can access both fine over 3G connection ONLY. I can use internet in my browser, and the speed is great with WIFI. The WIFI is working correctly for all other apps except cyanogenmod updates and google play. I am so done with this program. It has caused nothing but trouble and is the opposite of what I wanted, ease of use and a more reliable phone. Please someone help he revert to stock. I can not find information anywhere on the problems i have been having or how to revert to stock. Right now I can not use my phone at all because I can not access google play. I tried re installing cyanogenmod, factory reset, reflashing radio and bootloader, nothing works. Please, and Thank you for any help.
Click to expand...
Click to collapse
Greetings and welcome to xda. If you ask your question here
http://forum.xda-developers.com/moto-maxx/help
the experts there will be able to guide you
Good Luck
Sawdoctor
Hi everyone. I have a 2020 Moto G Power that uses the Verizon LTE network but is unlocked and on a Straight Talk plan. I bought it used and it has Android 11 on it. Build number is RPMS31.Q1-54-13-6 and is all stock, but it just had a security update overnight, so not the same that i've been having the issue on.
The problem I'm having with the phone is that I noticed that calling will randomly not work. I'll try to make a call, there will be no audible sounds on the handset like the normal ringing or anything, and the call will just hang up after a few seconds. I've been fixing it temporarily by rebooting the phone and it starts working after it comes up.
The issue appears to be either with the whole phone, or just the Phone app/calling in general. I only ever checked the calling function before trying to mitigate it with a reboot.
Has anybody heard of this kind of issue, know what might be causing it, or know any steps to troubleshoot it or permanently fix it?