Related
I recently dropped my phone into the toilet where it stayed for about 2-3 seconds. After that i pulled the battery, sim card, sd card and the other parts and let them dry for the better part of a day. When I put everything back it worked fine with the exception of the vol dwn button being activated when i press vol up. After a few days I am noticing the phone is barely holing a charge. It was off the charger for 2 hours and went from 100% - 66% (1 or 2 phone calls and a few internet pages). Should I replace my battery or is it my phone being messed up?
Not even worth troubleshooting. Just get a replacement from AT&T. Be sure to not tell them that you dropped it in the toilet
behrouz said:
Not even worth troubleshooting. Just get a replacement from AT&T. Be sure to not tell them that you dropped it in the toilet
Click to expand...
Click to collapse
Isn't there a water sensor sticker on the phone somewhere? Im pretty sure the tab on battery is red too...
i hope u got that sweet insurance.... 125 replaces anything!!!
I think I might try getting a new battery..since the water sensor is there for some reason...
that will not solve your problem. there's another water sticker inside the phone right behind the usb-socket under the back cover...
lordsilent said:
I recently dropped my phone into the toilet where it stayed for about 2-3 seconds. After that i pulled the battery, sim card, sd card and the other parts and let them dry for the better part of a day. When I put everything back it worked fine with the exception of the vol dwn button being activated when i press vol up. After a few days I am noticing the phone is barely holing a charge. It was off the charger for 2 hours and went from 100% - 66% (1 or 2 phone calls and a few internet pages). Should I replace my battery or is it my phone being messed up?
Click to expand...
Click to collapse
If you can't exchange it then I would replace the battery. Chances are that it shorted out briefly and probably fried a few cells in the battery.
if the fuze does go in the toilet is it a good idea to flush it with rubbing alcohol to flush out the water and also cuz alcohol evaporates quickly? would that have saved it?
i saved serveral cellphones from certain death with the following steps:
immediately take out the battery (obvious)
dissassemble the whole phone (even the smallest pieces!!!) and flush everything with isopropyl alcohol
put the mainboard and other circuit boards in a bowl with alcohol and leave it alone for some hours
dry the circuit boards with a cloth and put them on a radiator for 24 hours
reassemble the phone and if you're lucky it will work again
i even got phones to work again which took a bath in beer and softdrinks...
Another trick that I have heard is to put it in a bowl of uncooked rice. The rice should absorb any moisture that is around it. I've never had to do it, but it seems like it would work.
Also, be careful with isopropyl alcohol if you use it. Make sure it's the highest concentration you can get. There is a lot of water (50%) in the "cheap" stuff. If you look around you can get 70% alcohol. You can't really get 100% unless you work in a lab...it tends to burst into flames at 70 degrees F.
Howler82 said:
You can't really get 100% unless you work in a lab...it tends to burst into flames at 70 degrees F.
Click to expand...
Click to collapse
At room temperature? Not without a source of ignition - I work in a lab and haven't had any problems with that. It is, of course, highly flammable though. You wouldn't necessarily want to use absolute (100%) ethanol though, as, unlike 96% ethanol, as it often contains benzene, which isn't especially pleasant.
Someone I work with recently spilled wine on their MacBook and tried to recover it by flooding the machine with ethanol the next day, but since it was turned on at the time it seems that it shorted immediately and the damage was done. Maybe my old Psion Revo could have been saved from a fall in a puddle which it initially survived, though.
Either way, replacing the battery would be the obvious first thing to do if it's otherwise working fine (bar the volume controls). If it's shorting somewhere nonessential that could feasibly drain the battery fast as well, though?
Hello,
by a rediculous accident I forgot my HTC Diamond in the pocket of my jeans when running the laundry :-(
Afterwards, I opened the cover, took out the battery and let the phone dry out for 2 days. Now I've put it back together, and connected it to the charger. The "ring" is flashing, so the battery is charging but the phone itself is not starting and the display remains completely black, not even the vibration kick on starting...
Is there anything I could do? Or perhaps there is a chance to get out some photos I have shot earlier, would also be something...
ive heard that taking apart your phone and leaving the parts in rice can help (because the rice absorbs moisture)
Off topic:
I read one Desire went through a washing sequence in a washing machine in Desire spesific forum and now this?
Is this a new hobby? I mean... washing smartphone
darkman088 said:
Or perhaps there is a chance to get out some photos I have shot earlier, would also be something...
Click to expand...
Click to collapse
If the photos are on your micro sd card, you may be able to plug that into an adapter and plug it into your PC and gain access to them that way. Just be sure that micro sd card is thoroughly dry before doing so.
WORKING !!!
Hello,
thanks for the replies... This morning the phone booted!!! I was able to download the photos!!! But the screen has stains, obviously the remaining water.
PLEASE advise on how to dry that thing completely !!!
I think that I'm gonna pass on the rice thing.
@aaa - YOU ARE A JUNKA$$ !!! You think that's really funny?!? Especially when I'm currently TIGHT on budget and need the money for other things and the next phone is planned no earlier than Christmas... I'm hesitating whether you're a real human being...
You can dry it completely in an oven for three hours at thirty degrees or so. I've done this three times. If you have a fan forced oven, just turn the fans on, that'll be enough.
A safer way (if you can obtain it) is to leave the phone for 24 hours in a bowl of dessicant silica gel. You'll often get a small packet of silica gel when buying new electronics or other moisture-affected things. That small packet is enough, just put it in an airtight bag and leave it for 24 hours.
The next step would be disassembly and a thorough swabbing with denatured alcohol, but that's pretty extreme and only needed when the device isn't booting.
Some LCDs are hard to get moisture out of, some are not. Leaving the phone with the silica gel for longer will have a better effect. As the previous poster mentioned, rice also works (quite well), but takes longer than silica.
Good luck with it!
Another thin that will absorb moisture is common table salt. Take the phone apart very carefully. Remove battery first, make sure you're grounded as well.
Hello everybody.
thanks a lot for the numerous advices...
Unfortunately, I have more to report...
The phone dried out and booted 2 or 3 days later, as I said. The stains on the display disappeared as by magic one day later.
Everything was fine for a week until I launched the camera 2 days ago. The backlight of the display went off and came back only after removing the batter for 15 minutes.
Now the backlight is going off pretty often, sometimes it requires to remove the battery 1-2 times before it starts working again and yesterday it happened that it got activated again when I got a call...
Any ideas please?
And also the phone keeps overheating from time to time without real load (GPS or wi-fi) which dries out the battery. But I had this problem also before the laundry
Sounds like that moisture in the LCD unit left a bit of residue and is shorting the backlight somewhere.
Only option there would be to disassemble and swab the LCD boards and cables/connectors with denatured alcohol.
Alternatively, a new LCD unit should fix the problem if it persists, just make sure you alcohol swab the connectors before plugging them back in
Someone also mentioned drying out in salt before. While that does work, salt is extremely corrosive on solder and SMCs, so I wouldn't recommend that route.
i heard hair dryers are the bomb at the screen moisture, just take off all that you can and blow dry it.
I just don't understand your refusal on using white rice. It have saved countless phones.
Uncooked white rice is VERY mosture negative. Just put layer of rice, put your phone on it, cover it completely with white rice, seal it in. Ziploc could work too.
In a day or two your partially dry phone will be bone-dry. If it was soaked still you could first try to shake out water as much as can, soak it in distilled water to remove minerals, then white rice it for 3 to 5 days.
I had this problem with my Touch Diamond. Everything worked, but while i was trying to dry it I broke one of the battery "hinges" but the phone still worked after except only with black screen. The best thing to do probably is just leave it for a couple of days and hopefully your phone will be back!
XXCoder said:
I just don't understand your refusal on using white rice. It have saved countless phones.
Uncooked white rice is VERY mosture negative. Just put layer of rice, put your phone on it, cover it completely with white rice, seal it in. Ziploc could work too.
In a day or two your partially dry phone will be bone-dry. If it was soaked still you could first try to shake out water as much as can, soak it in distilled water to remove minerals, then white rice it for 3 to 5 days.
Click to expand...
Click to collapse
exactly what ive said. ive read everywhere that rice is one of the best solutions out there
Like was said before you most likely have some corrosion on a few contacts, if you have about 6 bucks you can spare you can get residue free contact cleaner in an aerosol at radio shack or any electronics store and save yourself having to scrub each contact and connector. Just tear the phone down down spray all the contacts and connectors with contact cleaner let it sit for a few then spray it down with air duster to get any thats get under the resistors, in the connectors, etc that hasn't dried; let it sit till you're positive everythings dry and put it back together. Does the same thing as alcohol just alot less scrubbing.
Sent from my i897 w/Andromeda 3, Suckerpunch kernel, & 1.3Ghz OC using Tegrak.
Hello,
thanks for narrowing the problem down.
But for me it looks like something different, because:
1) I have been using the phone for 1 week without any problems and it got screwed after I've launched the camera app for the first time
2) The backlight works when I power on the phone. But its stop is event-triggered, like when I launch the sound or video player or when I get a call... Similar events would trigger the backlight back on.
Perhaps reflashing the software could fix that?
I went to a shop today and put another battery. The phone booted, anyway without any backlight, twice...
At least the device is still alive.
There probably was a tiny water bubble and it messed with phone when you turned camera on.
darkman088 said:
Hello,
thanks for narrowing the problem down.
But for me it looks like something different, because:
1) I have been using the phone for 1 week without any problems and it got screwed after I've launched the camera app for the first time
2) The backlight works when I power on the phone. But its stop is event-triggered, like when I launch the sound or video player or when I get a call... Similar events would trigger the backlight back on.
Perhaps reflashing the software could fix that?
I went to a shop today and put another battery. The phone booted, anyway without any backlight, twice...
At least the device is still alive.
Click to expand...
Click to collapse
remove the back cover and battery from the phone, and put everyting in a bowl of rice for a day,. should fix everything,
XXCoder said:
There probably was a tiny water bubble and it messed with phone when you turned camera on.
Click to expand...
Click to collapse
Either that or a short in the cameras circuit from corrosion, either way i'd pull it apart before it gets worse and check it out.
Sent from my i897 w/Andromeda 3, Suckerpunch kernel, & 1.3Ghz OC using Tegrak.
Yesterday my phone got wet, the screen is howing some kind of wet spot under in, but heres the thing?
At the edges it seems the water damage is lightening the screen, yet in the middle theres a dark shadowy patch!
Any advice is great thanks?
take the battery out put the phone at a bowl with a dry rice give it a 48 hours
and your phone will be like new (tried a lot of times)
roytev said:
take the battery out put the phone at a bowl with a dry rice give it a 48 hours
and your phone will be like new (tried a lot of times)
Click to expand...
Click to collapse
This. Do this.
And do not delay.
If the phone works at all now it's because you're lucky and the water didn't get to anything sensitive yet. But the key word is 'yet'. It only takes a drop of water on a circuit board to ruin the device. If you don't have any rice at home right now, turn the phone off and pull the battery out NOW. Then go get rice. Don't leave the phone on to go to the store. The sooner the power is off, the better.
What happens is that the board gets slightly wet and when electricity is introduced there's a short. And tiny little circuit boards aren't designed to deal with electrical shorts. It hurts them. Badly. And quickly. And irreparably.
So taking the battery out is key as there's still electrical power in part of the circuits when the power to the phone is off. (Something's got to be polling the power button to know what to do when it's pressed. Something has to regulate the charging that works when the power is off, etc)What the rice does is creates a very dry environment by absorbing moisture.
In 2 days the rice will have sucked the water right out from under the screen.
And once you put it in the rice, don't touch it. Don't test it. Don't fuss with it. Just leave it there for 2 days and use another phone.
jamiee6610 said:
Yesterday my phone got wet, the screen is howing some kind of wet spot under in, but heres the thing?
At the edges it seems the water damage is lightening the screen, yet in the middle theres a dark shadowy patch!
Any advice is great thanks?
Click to expand...
Click to collapse
DO NOT RUN YOUR PHONE IF IT GETS WET. PULL THE BATTERY RIGHT NOW.
Even if your phone gets wet it is usually only damaged by running it after it is wet. If you let your phone dry for a few days it should be fine.
Thanks for the advice, that much i was already aware of - it was the dark area that appeared on the screen.
I have had the phone back on and run it with the screen max brightness and the dark patch has almost gone theres 2 small dots that are slightly lighter.
I will see what its like tomorrow.
jamiee6610 said:
Thanks for the advice, that much i was already aware of - it was the dark area that appeared on the screen.
I have had the phone back on and run it with the screen max brightness and the dark patch has almost gone theres 2 small dots that are slightly lighter.
I will see what its like tomorrow.
Click to expand...
Click to collapse
It should go away completely. I got mine where it was dark all the way around,and a fairly large spot in the middle. I just left my phone off four 24 hours, then used it, the spots were still there, but they went completely away.
Sent from my HTC Sensation 4G using XDA
Hey!
So On Saturday I dropped my phone down the toilet by accident, i removed it from the toilet, after about 5-10 seconds, and it was still on, it seemed fine, so I was like ohh okay...i dried it ect ect and it was working fine, but some parts of the touch wasn't working so I left it on as i could not switch it off. On that night i dried it with the hair dryer as well, didn't work, so wrapped it in a towel and but it in the boiler cubard to keep warm for around 12 hours maybe more...tried to switch it on and it didn't work again.
the day later (Sunday) decided to take it apart, and dry the insides, still wasn't working, but the notification light is on and sometimes flickers so i slept with it under my pillow as it would keep warm over night, on Monday, i put the charger in and the screen came on to that battery charging screen for around 5-6 seconds and it said it was on 0%....the notification light was still on.
I Put the phone in some rice in a box, wrapped it in a towel and left it in the boiler cubard again until Wednesday, afternoon....
what can i do?? will this work?? how much would it cost to get fixed?
is the touch screen broke? do i need new battery? ect ect
THANKS!
Best thing to do if you get a phone wet is turn it off and leave it off for at least a week. The problem is that moisture gets inside the phone itself and just takes time to evaporate. If you turn it on or leave it on after water gets in you run the risk of shorting something out and killing the phone (which is what sounds like happened). As far as repairing it is concerned, might as well get a new one, it'll cost less.
your phone should survive just give it some time in the rice, my brothers samsung ace went through something similar and he put it in rice and it was fine after a day buried in it, there is videos of the moto g submerged in water for a while and still works fine
good luck
Hello, ladies and gentlemen (and those inbetween, too)!
I will try to keep this as short as possible. If you want less details, tl;dr section at the end. EDIT: i.... didn't quite think this through
My girlfriend has an Xperia Z3 which she bought from a random seller from Germany (am UK residents). Everything about the phone was great, it was brand-new albeit it has been, apparently, been the display device; but other than that it worked perfectly. We even tested out the waterproofness right after setting up the device and charging it up to see if it works. Back then, it did.
Now, this friday (frikkin' Friday the 13th) she had some sort of an art project going on, which she wanted to do underwater. She does have a GoPro for it, but for some sample shots before finishing out, she decided she could just as well use her Xperia. Now, I was sleeping at the moment so I did not get to witness how she did it, but she assures me she closed the flaps extra carefully. However, after she tried submersing it into water, the screen started blinking randomly, as if there is some problem with LCD matrix of some sorts.
We put the Xperia into a bowl of rice and left it that way overnight. After turning the phone back on, the screen showed first "Sony Xperia" logo, then completely went blank. Just a random look-around on the Internet showed me that for extra help it would be best if you take your water-exposed phone and leave it upside-down while it is drying out. I was hopeless, but I didn't want to disappoint her so I said it would work. I was sure it would work since at times, when turning the phone on, some images did work out (like the charging icon when it's turned off and charging) so most probably the phone is not damaged yet, its just still exposed to water.
Next day, after leaving it just standing there upside down, the screen worked as normal, and normal touch functionality returned as well. Not for long however.
My final hurdle is this: When you turn on the phone (after being in vertical upside-down position) and hold it properly (as in, again, vertically, but upright-down) , the touch functions work very well. For a couple of minutes. After that the touch functionality artifacts (faulty touch detection, ultrahigh sensitivity etc) return. It appears that the water is still there somewhere, and as you hold the phone correctly, it goes down back a bit and impairs functionality.
Now, the question is: What can I do to completely remove the water from the device, seeing as keeping it in rice for 2 days did not remove the impairments from internal water exposure entirely?
So far I've tried only rice. Was bad call, but I did not think of anything better and used a bit of hairdryer at the very beginning of the issue, and yes, I now know that it was a stupid idea.
I think I will leave it in one-two more days upside-down in rice and see how it goes from there. Before turning on, I also thought about using the vacuum cleaner method of attempting to suck the water out of it through available holes.
Any other suggestions, tips and ideas? Would seriously want for things to go back to normal, considering now I do not have a phone (gave mine to girlfriend in place of her ill Xperia).
Thanks for your attention and I hope your devices stay healthy and safe!
tl;dr exposed Xperia Z3 to water with problems, turns out the damage was reversible and everything works well so far but touch functionality is faulty, still water stuck inside the phone that impairs touch screen, tried drying it by leaving in rice, gonna leave in rice for a day or two more and use vacuum cleaner on the holes right after, anything else that I could do?