[How To Fix]IMEI LOST/INVALID

[How To Fix]IMEI LOST/INVALID - Lenovo A850

If you lost your IMEI after flashing ROM,you can recover it using this method
How to check your Phone IMEI:
TYPE *#06# at phone dialer and came out-
Example
1)123456789012345(This is the normal IMEI)
2)INVALID IMEI(Lost/Invalid IMEI)
What you need:
1.MobileUncle Tool apk.
2Your IMEI number(Copy the IMEI of the phone box or from the bottom / top of the battery)
Step by Step
1.Run MobileUncle Tool
2.Enter Enginering Mode
3.Choose Enginering Mode (MTK)
4.Choose Tab Connectivity
5.Choose CDS Information
6.Choose Radio Information
7.Choose Phone 1,Write on the row:
AT + EGMR = 1.7, "IMEI_1 NUMBER HERE"
- Press SEND AT COMMAND
8. For Phone 2, write:
AT + EGMR = 1.10, "IMEI_2 NUMBER HERE"
Press SEND AT COMMAND
9. Restart Phone n Done
Dial * # 06 # to check your IMEI
#TO GET YOUR SECOND IMEI NUMBER,JUST ADD 8 TO THE LAST 3 DIGIT OF YOUR FIRST IMEI
EXAMPLE:xxx xxx xxx xxx 123+8=xxx xxx xxx xxx 131 is your second IMEI Number
Special Thanks to:nnnor.98015 for The Original POST
I JUST MODIFY AND ADD SOMETHING IN THE ORIGINAL POST AND MAKE IT A THREAD,SO CREDIT TO THE OWNER

Hello, do the steps and says "AT command is failed to send" that could be?

My lenovo A850 contact manager is not responding
---------- Post added at 08:19 AM ---------- Previous post was at 08:14 AM ----------
sajj04 said:
Hello, do the steps and says "AT command is failed to send" that could be?
Click to expand...
Click to collapse
My contact manager is not responding how do I fix it on my lenovo A850

sajj04 said:
Hello, do the steps and says "AT command is failed to send" that could be?
Click to expand...
Click to collapse
Did you check your baseband?Sometime this happen when the baseband is unknown

gizomu said:
My lenovo A850 contact manager is not responding
My contact manager is not responding how do I fix it on my lenovo A850
Click to expand...
Click to collapse
There are so many reason to occur the issue you mentioned
1) Virus/ malware infection
2) Contact database corrupted
3) Due to 3rd party application which share your address book such as Viber, line ets..
4) Sim card contact memory location having issue with data filed
5) recently you imported contact complicating or address book limit exceeded
Simply you can reset the device and most probably fault will be fixed but before reset the phone make sure all contact backup to the your google account.
Hope this answer help you!

I have my Lenovo S898t+
I tried this way but not working

Great
At last,i recover invalid IMEI for my lenovo A850 using this method.
Thanks for the tutorial and keep up the good job

imei
nasro_nd said:
I have my Lenovo S898t+
I tried this way but not working
Click to expand...
Click to collapse
hai nasro
if you find Solution for this proplem pleas tell me
thanks
[email protected]

I have lenovo s850 ....plzz what is the command for it?

amitsah695 said:
I have lenovo s850 ....plzz what is the command for it?
Click to expand...
Click to collapse
Did you try the guide above?

I have lenovo s850 and this guide isn't work , Sn Write tool also not work , what can i do now ?
it's displayed meta mode error what can i do now ?

No space and no . (dot)
AzrulHisyam said:
If you lost your IMEI after flashing ROM,you can recover it using this method
How to check your Phone IMEI:
TYPE *#06# at phone dialer and came out-
Example
1)123456789012345(This is the normal IMEI)
2)INVALID IMEI(Lost/Invalid IMEI)
What you need:
1.MobileUncle Tool apk.
2Your IMEI number(Copy the IMEI of the phone box or from the bottom / top of the battery)
Step by Step
1.Run MobileUncle Tool
2.Enter Enginering Mode
3.Choose Enginering Mode (MTK)
4.Choose Tab Connectivity
5.Choose CDS Information
6.Choose Radio Information
7.Choose Phone 1,Write on the row:
AT + EGMR = 1.7, "IMEI_1 NUMBER HERE"
- Press SEND AT COMMAND
8. For Phone 2, write:
AT + EGMR = 1.10, "IMEI_2 NUMBER HERE"
Press SEND AT COMMAND
9. Restart Phone n Done
Dial * # 06 # to check your IMEI
#TO GET YOUR SECOND IMEI NUMBER,JUST ADD 8 TO THE LAST 3 DIGIT OF YOUR FIRST IMEI
EXAMPLE:xxx xxx xxx xxx 123+8=xxx xxx xxx xxx 131 is your second IMEI Number
Special Thanks to:nnnor.98015 for The Original POST
I JUST MODIFY AND ADD SOMETHING IN THE ORIGINAL POST AND MAKE IT A THREAD,SO CREDIT TO THE OWNER
Click to expand...
Click to collapse
I found a little thing that make that command failed; there's no space and no . (dot) within the command, so the command should be
AT+EGMR=1,7,"IMEI_1 NUMBER HERE"
that works with Lenovo A859

albalain said:
I found a little thing that make that command failed; there's no space and no . (dot) within the command, so the command should be
AT+EGMR=1,7,"IMEI_1 NUMBER HERE"
that works with Lenovo A859
Click to expand...
Click to collapse
Thanks for pointing that out,
My device work fine with the dot but i glad your device work otherwise and there is absolutely no space between AT+EGMR(maybe the post like there are)
I will edit the post
Btw, thanks

Ok ,the first sorry for my bad english , the solución is, go to google Play an download the apk name "chamelephone" instal, open and wryte your imeis were lets you option click in create an reboot an all is ok , test and coment.

I have lenovo a319 imie invalid
Iused this method but command not set plz help me

This method didn't work for me, but this one did!
https: // www . youtube.com / watch?v=zOu-Whup6Jo
Hope it helps! Regards!

No permanent solution
It requires root. Also it's not permanent solution. After performing hard reset, imei are erased again. So give permanent solution.

I used Maui meta to recover my imei you guys could also try sn writer

albalain said:
I found a little thing that make that command failed; there's no space and no . (dot) within the command, so the command should be
AT+EGMR=1,7,"IMEI_1 NUMBER HERE"
that works with Lenovo A859
Click to expand...
Click to collapse
Thank you very much (an original author and you)! Really.
( AT+ EGMR=1,7,"IMEI_1 NUMBER HERE" worked for Phone 1 and AT+ EGMR=1,10,"IMEI_1+8 NUMBER HERE" for Phone 2 ( IMEI1 + 8 ) )
Btw, a command *#06# shows two same IMEIs, but SIMs and dialling works. Is that okay?

What happens when I dont have my imei number
What happens I.don't have my original imei number
Dailing the 06 thing says invalid IMEi
The sticker on which the IMEI.number was is so faded I cant make out jack.....
The box is gone
Hellpppppppp????

Related

|TUT|SOLUTION|No Service Problem/Invalid IMEI mediatek phones|

Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.

bilalz400 said:
Bro nice method also add the mtk droid tools method i have posted in my root guide because this methods does not work in my phone
Click to expand...
Click to collapse
ok i will add that but u can try other method which is working for some members , see my signature :good:

qmobilea2 said:
ok i will add that but u can try other method which is working for some members , see my signature :good:
Click to expand...
Click to collapse
I have fixed my imeis long ago I was just telling u to add the method as we'll
Sent from my A2_Classic using xda app-developers app

bilalz400 said:
I have fixed my imeis long ago I was just telling u to add the method as we'll
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
ohkey!! link ur thread here so i can add it here

Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/
fmnok7ke7
1. remove all sim cards from phone ,turn on
the phone in normal mode and connect it
2. open mtk tools press root button it will ask
you for some thing just click ok
3. Click replace imei and enter the imei
numbers (can be found on phone box or back
of phone)
4. Click ok reboot your phone check for
updated imei numbers
Click to expand...
Click to collapse
Credits to @rua1 for mtk droid root and tools

qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
Doesnt work. I dont have any folder after the MD folder so I created a new one still no IMEI

qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.

phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
Try using another phone's nvram.bin, which is illegal and modify the IMEI with SN Write Station or any other tools to correspond with that of your phone.

phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
1. check your baseband with mtkdroidtool if it null,you just only use flashtool format it (whole flash) and up rom again,your baseband will return,imei still null.Now you can use mtkdroidtool to re-write your imei,or use Imei & SN writer tool for hard imei.
2.if you still have baseband,just can not write imei throw mtkdroidtool -> just use Imei & SN writer,please install full driver for your mtk devices, include cdc driver

billy_cater said:
1. check your baseband with mtkdroidtool if it null,you just only use flashtool format it (whole flash) and up rom again,your baseband will return,imei still null.Now you can use mtkdroidtool to re-write your imei,or use Imei & SN writer tool for hard imei.
2.if you still have baseband,just can not write imei throw mtkdroidtool -> just use Imei & SN writer,please install full driver for your mtk devices, include cdc driver
Click to expand...
Click to collapse
I did those already non works. I Send the phone back to the manufacturer and I have to wait for a month for replacement.

It is working for me..
qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
I've tried all the other software like the IMEInSe writer, the MauiMeta 3g, MTK droid tools... none of them worked. But the method mentioned above worked for me.... now there wasn't any NVRAM error in the wireless notification.... The simcard can register to the network as well... this is flawless...
just to share... CPU version showed by the software was MT6572, but if i boot it in factory mode, it tells me its MT6589... I do not know which one is the right one, but the above methods worked for me.... Samsung S4 Korean (clone 1:1) mediatek. running JB Android 4.2.2..
Thanks...:good::good::good:

billy_cater said:
1. check your baseband with mtkdroidtool if it null,you just only use flashtool format it (whole flash) and up rom again,your baseband will return,imei still null.Now you can use mtkdroidtool to re-write your imei,or use Imei & SN writer tool for hard imei.
2.if you still have baseband,just can not write imei throw mtkdroidtool -> just use Imei & SN writer,please install full driver for your mtk devices, include cdc driver
Click to expand...
Click to collapse
Thank you for your reply sir, However the IMEI & SN Writer I tried using that but I always receive an error that "cannot write meta data something" any other ideas?

phaw16 said:
Thank you for your reply sir, However the IMEI & SN Writer I tried using that but I always receive an error that "cannot write meta data something" any other ideas?
Click to expand...
Click to collapse
please sure you already install cdc driver and have database file for your devices (mtk6577,6589.....) i use it for all my mtk devices and it alway work

billy_cater said:
please sure you already install cdc driver and have database file for your devices (mtk6577,6589.....) i use it for all my mtk devices and it alway work
Click to expand...
Click to collapse
Yes I am absolute that I installed all necessary files driver and etc there are no errors on my device manager or whatsoever. Its just the cannot boot on metadata something error.

bilalz400 said:
Credits to @rua1 for mtk droid root and tools
Click to expand...
Click to collapse
Sir, one of the links is not working.

yeahhhh nice work dude !
i follow this step and its work for me!
thank you so much. :good:

Oh my man! you just saved my day! this trick really work by the way i just restore my original IMEI in my phone that found in my warranty card! anyways thanks more power and thanks for sharing

You truly are a legend mate.
Holy**** it worked for me, your method saved my ass Thank you.
It really works like charm.

[Tutorials]{WORKING}Permanent Solution Of IMEI In Canvas A110Q{Canvas 2+}

PERMANENT SOLUTION OF IMEI IN CANVAS 2+
MANY PEOPLE ALWAYS SUFFER PROM THIS PROBLEM INVALID IMEI IN CUSTOM ROM OR STOCK ROM
SO,HERE I BROUGHT PERMANENT SOLUTION OF IMEI ON CANVAS 2+ 
**DOWNLOAD-LINKS**
1. IMEI_FILES;- http://d-h.st/L5N
2. IMEI_TOOL;- http://d-h.st/WDg
3. Cdc Driver :- http://d-h.st/riS
**REQUIREMENT**
1. PC
2. MINE UPLOADED FILES
3. LITTLE KNOWLEDGE AND MIND
**PROCEDURE**
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....[/SIZE][/FONT]
NOTES:-
1. THIS WILL NEVER GIVE U INVALID IMEI ERROR DURING FLASHING ANY ROM OR CHANGING ANY ROM.
2. WHEN U FORMAT UR CELL THROUGH SP FLASH TOOL THEN ONLY IT WILL SHOW INVALID IMEI..
3. THIS IS UNIVERSAL METHOD SO IT WILL WORK ON ALL MEDIATEK CHIPSET WHOSE GETTING INVALID IMEI.
4. FOR OTHER MEDIATEK CHIPSET USER U NEED UR STOCK DATABASE FILE (BASEBAND FILE AND AP FILE)
5. THIS WILL ONLY WORK WHEN U GET INVALID IMEI THEN DO THIS PROCESS AND U GET FREE FROM INVALID IMEI PROBLEM
CREDITS:-
1. [email protected]
2. IMEI TOOL MAKER (DON'T KNOW WHO MAKE THIS WONDERFUL IMEI TOOL)
3. PRATEEK SINGH (TESTER)

in d imei 1 n 2 nothing comes up and everything skips

Ayaorei said:
in d imei 1 n 2 nothing comes up and everything skips
Click to expand...
Click to collapse
for which phone u trying and make sure u installed driver properly
Sent from my A110Q using XDA Premium 4 mobile app

hi bro thanks a lot for ur support,
but i dont have my stock rom for my micromax a110,so could u give me the required files kindly,
if u want i can give u my imei no.s
pls help me.
i'm in miui v5 rom, in this even i'm not getting my imei no.s from engineering mode>cds info> radio info> phone1 Phone2 paths as this cds info button is not enabled there to press it. but i've a doubt here i've flashed ultimate galaxy v2 rom even in that i got d same problem for imei but in engineering mode i'm able to go to cds info> radio info> phone1...... & i got my imei back in that rom, but i'm not getting in this rom.
so kindly help me
thanks a lot in advance

not help ful
i firstly flashed stock rom 1 and then applied this patch but now first sim works fine but second sim does not work there is a cross on second sim
i tryed to connect manualy to network no effect al forbidden networks present
and i put sim in other phone it works fine
how to make my sim work on my canvas 2 + which is gone through system storage increase

Saurabh mulik said:
i firstly flashed stock rom 1 and then applied this patch but now first sim works fine but second sim does not work there is a cross on second sim
i tryed to connect manualy to network no effect al forbidden networks present
and i put sim in other phone it works fine
how to make my sim work on my canvas 2 + which is gone through system storage increase
Click to expand...
Click to collapse
Try again and make sure u put ur both imei properly first imei is Hw and second is Sw so check that
Sent from my A110Q using XDA Premium 4 mobile app

[email protected] said:
Try again and make sure u put ur both imei properly first imei is Hw and second is Sw so check that
Sent from my A110Q using XDA Premium 4 mobile app
Click to expand...
Click to collapse
but can i know what is Hw and Sw plz

canvas 4 problem
i am facing d invalid Imei number problem, in my canvas A210. Engineering mode didn't worked. Please help me !

invalid imei solved from within the phone
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone

Thank you..!
[email protected]
Thanks dude...it worked for my Xolo Q800.

Not working.....tried 10 times.Deeply followed all steps.

plz help i m pissed help me
[email protected] said:
PERMANENT SOLUTION OF IMEI IN CANVAS 2+
MANY PEOPLE ALWAYS SUFFER PROM THIS PROBLEM INVALID IMEI IN CUSTOM ROM OR STOCK ROM
SO,HERE I BROUGHT PERMANENT SOLUTION OF IMEI ON CANVAS 2+ 
**DOWNLOAD-LINKS**
1. IMEI_FILES;- http://d-h.st/L5N
2. IMEI_TOOL;- http://d-h.st/WDg
3. Cdc Driver :- http://d-h.st/riS
**REQUIREMENT**
1. PC
2. MINE UPLOADED FILES
3. LITTLE KNOWLEDGE AND MIND
**PROCEDURE**
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....[/SIZE][/FONT]
NOTES:-
1. THIS WILL NEVER GIVE U INVALID IMEI ERROR DURING FLASHING ANY ROM OR CHANGING ANY ROM.
2. WHEN U FORMAT UR CELL THROUGH SP FLASH TOOL THEN ONLY IT WILL SHOW INVALID IMEI..
3. THIS IS UNIVERSAL METHOD SO IT WILL WORK ON ALL MEDIATEK CHIPSET WHOSE GETTING INVALID IMEI.
4. FOR OTHER MEDIATEK CHIPSET USER U NEED UR STOCK DATABASE FILE (BASEBAND FILE AND AP FILE)
5. THIS WILL ONLY WORK WHEN U GET INVALID IMEI THEN DO THIS PROCESS AND U GET FREE FROM INVALID IMEI PROBLEM
CREDITS:-
1. [email protected]
2. IMEI TOOL MAKER (DON'T KNOW WHO MAKE THIS WONDERFUL IMEI TOOL)
3. PRATEEK SINGH (TESTER)
Click to expand...
Click to collapse
hey bro i did as said in description but i m kinda stuck on start wrting imei i installed the driver n than run as admin load files for 6589 remove battery then insert again then connect phone boots up then write imei startes n nothin moves forwrd even after 20min of waiting plz help i hav installed a custom rom n dont want to restore bk to my stock rom plz help bro plzzzz.....
---------- Post added at 06:03 PM ---------- Previous post was at 05:58 PM ----------
dhruv chandhok said:
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Click to expand...
Click to collapse
plz help mate when i do it in engg mode it says at fails to send it worked with my stock rom but dont really want stock rom n now used imei writer i got all drivers n stuff with me install n working just problem is that imei writer is idling at the start of write imei i waited for like 30min n no progress still at wrtie imei plz help i m really pissed

stuck
Stuck on enter modemmeta and then failed
What to do?

i lost my canvas lite imei number can you plz do the same with canvas lite

dhruv chandhok said:
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Click to expand...
Click to collapse
at command failed to send
????

good work manish bro...

[email protected] said:
PERMANENT SOLUTION OF IMEI IN CANVAS 2+
MANY PEOPLE ALWAYS SUFFER PROM THIS PROBLEM INVALID IMEI IN CUSTOM ROM OR STOCK ROM
SO,HERE I BROUGHT PERMANENT SOLUTION OF IMEI ON CANVAS 2+ 
**DOWNLOAD-LINKS**
1. IMEI_FILES;- http://d-h.st/L5N
2. IMEI_TOOL;- http://d-h.st/WDg
3. Cdc Driver :- http://d-h.st/riS
**REQUIREMENT**
1. PC
2. MINE UPLOADED FILES
3. LITTLE KNOWLEDGE AND MIND
**PROCEDURE**
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....[/SIZE][/FONT]
NOTES:-
1. THIS WILL NEVER GIVE U INVALID IMEI ERROR DURING FLASHING ANY ROM OR CHANGING ANY ROM.
2. WHEN U FORMAT UR CELL THROUGH SP FLASH TOOL THEN ONLY IT WILL SHOW INVALID IMEI..
3. THIS IS UNIVERSAL METHOD SO IT WILL WORK ON ALL MEDIATEK CHIPSET WHOSE GETTING INVALID IMEI.
4. FOR OTHER MEDIATEK CHIPSET USER U NEED UR STOCK DATABASE FILE (BASEBAND FILE AND AP FILE)
5. THIS WILL ONLY WORK WHEN U GET INVALID IMEI THEN DO THIS PROCESS AND U GET FREE FROM INVALID IMEI PROBLEM
CREDITS:-
1. [email protected]
2. IMEI TOOL MAKER (DON'T KNOW WHO MAKE THIS WONDERFUL IMEI TOOL)
3. PRATEEK SINGH (TESTER)
Click to expand...
Click to collapse
sir when i press the start button..and connect my mobile in switch off mode the the mobile is not start up and in the software it show enter meta mod fail...what to do sir please help me....

dhruv chandhok said:
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Click to expand...
Click to collapse
Wow........Wow......Wow...... I was actually messed up with all the methods.... And this tutorial is just awesome.... Thanks a ton...... Amazing solution.... Worked like a charm....Many Many thanks..... Salute youuuuuuuu

Many thanks working for me..........

[email protected] said:
PERMANENT SOLUTION OF IMEI IN CANVAS 2+
MANY PEOPLE ALWAYS SUFFER PROM THIS PROBLEM INVALID IMEI IN CUSTOM ROM OR STOCK ROM
SO,HERE I BROUGHT PERMANENT SOLUTION OF IMEI ON CANVAS 2+ 
**DOWNLOAD-LINKS**
1. IMEI_FILES;- http://d-h.st/L5N
2. IMEI_TOOL;- http://d-h.st/WDg
3. Cdc Driver :- http://d-h.st/riS
**REQUIREMENT**
1. PC
2. MINE UPLOADED FILES
3. LITTLE KNOWLEDGE AND MIND
**PROCEDURE**
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....[/SIZE][/FONT]
NOTES:-
1. THIS WILL NEVER GIVE U INVALID IMEI ERROR DURING FLASHING ANY ROM OR CHANGING ANY ROM.
2. WHEN U FORMAT UR CELL THROUGH SP FLASH TOOL THEN ONLY IT WILL SHOW INVALID IMEI..
3. THIS IS UNIVERSAL METHOD SO IT WILL WORK ON ALL MEDIATEK CHIPSET WHOSE GETTING INVALID IMEI.
4. FOR OTHER MEDIATEK CHIPSET USER U NEED UR STOCK DATABASE FILE (BASEBAND FILE AND AP FILE)
5. THIS WILL ONLY WORK WHEN U GET INVALID IMEI THEN DO THIS PROCESS AND U GET FREE FROM INVALID IMEI PROBLEM
CREDITS:-
1. [email protected]
2. IMEI TOOL MAKER (DON'T KNOW WHO MAKE THIS WONDERFUL IMEI TOOL)
3. PRATEEK SINGH (TESTER)
Click to expand...
Click to collapse
Step 8 says ". NOW SWITCH OFF UR CELL AND CONNECT "
Step 12 says "AGAIN CLICK ON START AND CONNECT UR PHONE ....NOW IT WILL WRITE IMEI PERMANENTLY"
A little confused here..................
Between 8 and 12 when should we removed the phone's connection ?

[Q] Need help radio-off no sim card detected,imei not valid

Anyone can upload me firmware folder /system/etc/firmware from lenovoA850,i am having some issues related to my baseband radio maybe this can help me fixing that?

The solution to the problem
If the IMEI lost / invalid last flash ROM
Dial * # 06 # out "invalid IMEI"
Copy / indicate the IMEI of the phone box or from the bottom / top of the battery.
Use MobileUncle Tool:
1. The Run MobileUncle
2. Joined Enginering Mode
3. Choose Enginering Mode (MTK)
4. Choose Tab connectifity
5. Choose CDS Information
6. Choose Radio Information
7. Choose Phone 1, Write on the row:
AT + EGMR = 1.7, "IMEI_1 PARKING HERE"
- Press SEND AT COMMAND
8. For Phone 2, write:
AT + EGMR = 1.10, "IMEI_2 PARKING HERE"
- Press SEND AT COMMAND
9. Restart Phone ... DONE
Dial * # 06 #
====================

nnnor.98015 said:
The solution to the problem
If the IMEI lost / invalid last flash ROM
Dial * # 06 # out "invalid IMEI"
Copy / indicate the IMEI of the phone box or from the bottom / top of the battery.
Use MobileUncle Tool:
1. The Run MobileUncle
2. Joined Enginering Mode
3. Choose Enginering Mode (MTK)
4. Choose Tab connectifity
5. Choose CDS Information
6. Choose Radio Information
7. Choose Phone 1, Write on the row:
AT + EGMR = 1.7, "IMEI_1 PARKING HERE"
- Press SEND AT COMMAND
8. For Phone 2, write:
AT + EGMR = 1.10, "IMEI_2 PARKING HERE"
- Press SEND AT COMMAND
9. Restart Phone ... DONE
Dial * # 06 #
====================
Click to expand...
Click to collapse
A good sharing, thanks

sim was not detecting duto imei
powerwoot said:
A good sharing, thanks
Click to expand...
Click to collapse
for single sim users...?
this comand was not working and "SEND AT COMMAND" failed...
please help me...
my devise is single sim

i done it but....
nnnor.98015 said:
The solution to the problem
If the IMEI lost / invalid last flash ROM
Dial * # 06 # out "invalid IMEI"
Copy / indicate the IMEI of the phone box or from the bottom / top of the battery.
Use MobileUncle Tool:
1. The Run MobileUncle
2. Joined Enginering Mode
3. Choose Enginering Mode (MTK)
4. Choose Tab connectifity
5. Choose CDS Information
6. Choose Radio Information
7. Choose Phone 1, Write on the row:
AT + EGMR = 1.7, "IMEI_1 PARKING HERE"
- Press SEND AT COMMAND
8. For Phone 2, write:
AT + EGMR = 1.10, "IMEI_2 PARKING HERE"
- Press SEND AT COMMAND
9. Restart Phone ... DONE
Dial * # 06 #
====================
Click to expand...
Click to collapse
i done it but i m not able to send to command...
when i press send to command it do nothing...
why ??
plz help me sir.!!

ankush_pathania said:
Anyone can upload me firmware folder /system/etc/firmware from lenovoA850,i am having some issues related to my baseband radio maybe this can help me fixing that?
Click to expand...
Click to collapse
Hey...i will give u a backup of my nvram file...just restore using droidtools...i will give u it tomorrow...i m working on it so...just remind me tomorrow

Same problem lenovo s850
Please help me. When i type the commands you said it says me "AT command is mSent". What can i do please i am very sad about it.

don't working command in radio information
this command is not allowed in userbuild

accindantally format all
android_digger said:
Hey...i will give u a backup of my nvram file...just restore using droidtools...i will give u it tomorrow...i m working on it so...just remind me tomorrow
Click to expand...
Click to collapse
Hey Can anyone help me?
I accidently format/all when using sptools and didn't have a backup.
Currently chnaging imei doesn't work (get error send) and mi radio is off at the moemnt. Reflashed multiple times with format all (stock rom) to no succes.
What should i do?

Where can i get the IMEI 2 no.?

Hi i have a elephone p8000 and the radio is state off .
Is there a AT command that fix that problem? thanks

[Guide] [How to] Repair IMEI Invalid | NV RAM Warning | Micromax Unite 2

REQUIREMENTS
Rooted Device
Custom Recovery
(CTR, CWM Recommended)
Click to expand...
Click to collapse
One week after i brought my phone, I accidently formatted my device using sp flash tools and lost the IMEI/NVRAM. It has been a real pain for me to repair it because i was new to an mtk device. Finally figured out how to repair by doing many search. So I made this thread to share the working methods to help those people who are suffering from invalid IMEI
So let's start.
Always remember "Prevention is better than cure". If you are planning to flash a custom rom, First of all Backup your IMEI. Don't Trust that a custom ROM flash will not delete your IMEI number. because odds are it will. It's important to store your backup to external SD because some ROM flashing techniques will erase your internal SD. so the best way to keep your IMEI number is to take my advise and make a backup.
Some Video tutorials will be added soon
DISCLAIMER: Do not do try any of these methods unless your IMEI has been lost! Doing so may permanently corrupt your imei partition.
IMEI Backup & Restore Methods:
1. Mobile Uncle Tools:
1. Open the App,
2. Select IMEI BACKUP RESTORE (MTK)
3. Choose BACK UP TO SDCARD (MTK)
4. Reboot
>> (to restore, choose restore from sd card)
2. MTK Droid Tools [PC Required]:
1. Switch on the phone and connect it to pc.
2. Go to settings->about phone.
3. Tap build number for 7 times.
4. Go back and enter developers options, and check usb debugging on.
5. Start MTK Driod Tools and click root. grant root permission in phone.
6. Click IMEI/NVRAM and click backup or restore as required.
>> (to restore, choose the backup file from nvram backup folder)
Temporary IMEI Restore (without Backup):
(These are Temporary Methods, so you need to do this every time you upgrade Firmware, install a new rom, or doing a factory reset.)
1. Chamelephon
1. Install Chamelephon.apk
2. Open App
3. Type both IMEI Numbers
4. Click "Apply new IMEIs"
5. Reboot
Video Tutorial
2. MTK Droid Tools [PC, ADB Drivers Required]
1. Enable USB debugging
2. Open MTK Droid tools in PC
3. Allow USB debugging in phone if asked
4. Click ROOT button in MTK droid tools
5. Click Yes and Grant/Authorize root permission in phone
6. Click IMEI/NVRAM option in MTK droid tools
7. Type both IMEI numbers
8. Select "Replace IMEI"
9. Click OK
10. Reboot!
Video Tutorial
2. NVRAM Wifi Error
1. Download "NVRAM Wifi Fix.zip"
2. Enter Recovery
3. Install the zip
4. Reboot
Permanent IMEI Restore(without Backup):
1. Maui META 3G Tool
1. Install "Maui META 3G Tool" on your PC
2. Open it.
3. Click "Options ↦ Connect Smart phone into META mode"
4. Click on Reconnect button
5. Switch off your phone
6. Connect via USB Cable
7. Change "Get Version" to "IMEI Download"
8. Click "Change NVRAM Database file"
9. Download & extract "NV Ram Database Files.rar"
10. Select "BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V5_1_wg_n"
11. Type both IMEI numbers
12. Click "Download to flash"
13. Click "Upload from flash"
14. Close the IMEI Download Tab
15. Disconnect
16. Switch on the phone.
2. IMEI&SN Writer
Didn't tried this method. Hope this too will work!
1. Flashing NVRAM.bin (Recommended for Lolipop Roms )
1. Install SP flash tool
2. Load Scatter file
4. Now press download
5. Connect your phone without battery
6. Insert battery & turn on your device when you see the green tick.
new blog under construction:
for broken links, and other video guides, click here
DOWNLOADS
MOD EDIT - ALL THE LINKS ARE REMOVED SINCE XDA RULES DO NOT PERMIT PAY PER CLICK.
I really worked hard to make this thread. Hit THANKS button if you found this useful
You can add your experience in fixing imei below on this thread. It may help many others! Always remember, Sharing is caring! Thank You.

Reserved
Reserved
USB VCOM Driver installing guide: http://forum.xda-developers.com/showthread.php?t=2206421

NVRAM Error and Serial Number fix with SN WRITE STATION TOOL on unite 2
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.

cdc drivers....
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz

No Sim card detect in my UNITE 2
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.

dark_x said:
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz
Click to expand...
Click to collapse
I didnt have it right now. Don't know that where did i find those drivers. Search it in google. I will try to figure it out as i got some free time.

viru_192 said:
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.
Click to expand...
Click to collapse
What about your imei number???

I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x

rahulsingla said:
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.
Click to expand...
Click to collapse
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?

answer
nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Yes i select same file for twice name of file is given above in my post and i never try to write other things like bt address, imei same time but i want to say don't try to write bt address because it will show error every time when you try to write and i also want to say that imei number can be written with this tool but select only imei don't other things like sn number, wifi mac address.......etc. try one thing only at same time. means when you want to write imei then select only imei but you can choose sn and wifi mac address at same time it can be flashed successfully......
---------- Post added at 04:48 AM ---------- Previous post was at 04:41 AM ----------
dark_x said:
I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2206421
find drivers in this link ..... thanks to kumar abhishek for his guide for driver and installation procedure.......

nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Hey i have the same problem. Did you find any solution?

girrafe said:
Hey i have the same problem. Did you find any solution?
Click to expand...
Click to collapse
I got this issue while running on lolipop firmware, trying to write imei with my PC running Windows XP, but for kitkat, it works.. These applications didn't worked for me in Windows 8.1 and 10

Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.

johnygeorge said:
Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.
Click to expand...
Click to collapse
try the permanent imei repair method mentioned in the first post.

ajiththiruvatta said:
try the permanent imei repair method mentioned in the first post.
Click to expand...
Click to collapse
Bro thanks for helping me. I hv one last question i hv nv ram.bin file of my stock rom ok but when i load scatter file in sp flash tool there is no option to flash nvram.bin if u try figure it out i will appreciate.

How to Fix Invalid IMEI Problem of a MediaTek Android Phone

Usually Invalid IMEI error occurs after you flash your MediaTek device. No need to worry as there is a simple fix for this issue. No need of root privileges on either method.
Method 1: (Works even if your phone a single error of Invalid IMEI or both if you have a dual sim)
1. Open dialpad and input *#06# (If a single sim is working you can see an IMEI and another is invalid, you can find invalid IMEI under battery of your phone)
2. Copy IMEI number.
3. If no sim is working you can find those numbers just below your phone battery.
4. Open mobile uncle, click engineer mode and chose android or mtk.
5. Go to connectivity, CDS Information, then radio information and chose the sim that isn't working, either one or two.
6. For sim 1 press phone 1, Click on AT+ on the top and type these AT+EGMR=1,7,"XXXXXXXXXXXXXXX"..... Here "XX.....X" is your IMEI number. Type it (make sure its in quotes). Now click send then reboot.
7. If invalid sim is sim 2 then click phone 2 and type AT+EGMR=1,10,"XXXXXXXXXXXXXXX" , click send then reboot.
Method 2:
Dial “* # * # 3646633 # * # * 2- then follow that path –> CDS info –> Radio info –> Phone1 (for the first imei) 3- at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1? (instead of IMEI_1 put your first imei number) 4- hit send command 5-if you done just reboot the phone, if you change the second imei go to step 2 and select “Phone2? 6-and enter the code “AT +EGMR=1,10,”IMEI_2? (instead of IMEI_2 put your second imei number) hit send command 7-reboot 8-Dail ” *#06#” Check Imei(onlyshow the first one)

Baseband unknown and IMEI invalid in Micromax A120 jellybean
I tried this method on my Micromax A120 jellybean.
When I tap in send button it shows "AT command failed to send".
What to do now sir ?
Sent from my Micromax A089 using XDA Free mobile app

IMEI invalid in CCIT S8 pro
I have a CCIT S8 pro chinese phone. which i have flashed two weeks later but now the problem is phones imei is showing invalid what should i do plz help me. Thanks in advance. Plz help.

Thanks this helped me to restore the imei on my phone

Cds information didn't occur

I've got info for first time: "This command is not allowed in UserBuild" because my ERGO A500 add by himself this AT+ command without space
Then I made some research and it's important to add SPACE between AT and + so it must be AT + not just AT+ like exactly like @subodhpoudyal wrote above

psg said:
I've got info for first time: "This command is not allowed in UserBuild" because my ERGO A500 add by himself this AT+ command without space
Then I made some research and it's important to add SPACE between AT and + so it must be AT + not just AT+ like exactly like @subodhpoudyal wrote above
Click to expand...
Click to collapse
hi bro,
i put a space bitween + and E but i steel have the same ERROR "This command is not allowed in UserBuild"...
so how could i fix it

doc.hafedh said:
hi bro,
i put a space bitween + and E but i steel have the same ERROR "This command is not allowed in UserBuild"...
so how could i fix it
Click to expand...
Click to collapse
The best tool for fixing Invalid IMEI in MTK devices is Maui META. Google it.
When it is installed connect your device (make sure you have the correct USB drivers and debugging enabled in developer options)
The tool works on your phone whilst the device is in META mode.
There are many guides online on how to use it,
It works better than anything else and it is incredibly user friendly,
Rumble_Fish

The Engineering mode method doesn't work on all phones. Tools like SN Writer, Maui Meta and hardware boxes / dongles (e.g Infinity CM2, Miracle box, NCK box etc) would prove more reliable. You can read up mod edit - blog links removed for many other methods

i have a problem
now i have a problem i flashed my phone lenovo a7010 and i've invalid imei and when i enter the engineering mtk mode there is no cds information option i tried alot and no solution

Database Info

welcome