Database Info

[Q&A] [ROM][5.X][XT1028/XT1031] CyanogenMod 12.1 for Moto G [METICULUS]

Q&A for [ROM][5.X][XT1028/XT1031] CyanogenMod 12.1 for Moto G [METICULUS]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.X][XT1028/XT1031] CyanogenMod 12.1 for Moto G [METICULUS]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

no calls or data
I have an xt1031 flashed to page plus. I have bootloader 41.19 from a failed lollipop update attempt. I flashed the 4/8 build and I can't make calls and do not have 3g. The network shows as 31000. What should I do?

I have been trying each of his builds and anything newer than 4/8 data hasnt worked I'm on boost if that makes any difference

Verizon?
Good morning,
I'm on an XT1028 still with service through Verizon Prepaid; my bootloader is unlocked and I'm on an optimized KK stock ROM at the moment. I've been following the development of Meticulus' CM12.1 through the primary thread and there has been a lot of discussion as to problem solving and issues on the XT1031 and various carriers but little mention as to the status of the latest weekly builds on the XT1028 still on Verizon in terms of functionality or hiccups from users. Does anyone have the latest versions running on their 1028? Are any of the data or service issues present when running it on Verizon?
Thanks.

Followup: Installed the latest 4/25 weekly on my XT1028 on Verizon Prepaid. Installed fine, got phone and SMS, but the network is identified as Boost Mobile and I have no mobile data. Is there a fix? Is a build.prop edit necessary for Verizon? Thanks.

Reboot then bootloop
Hi, I've been trying to get my installation of this ROM working for two days now, but keep running into an issue that I cannot seem to solve
My device is a 2013 Moto G XT1031 (Boost Mobile) with Bootloader version 41.05 and the latest CWM recovery.
The issue has been occurring on build 4/8, 4/25, and 5/2.
The exact steps I have been taking to install this ROM (for all builds) and then what happens:
Bootloader is unlocked
Going into recovery and wiping dalvik cache then factory reset (wipe)
Installing CM11 (latest snapshot) [on my first attempts only, not afterwards since it made no difference anymore]
Factory reset again (just to be certain)
Installing the zip for a build specified above
Installation always succeeds with no errors
Installing gapps-L-3-28-15 with success
Reboot into android
First boot always succeeds (and takes appropriate length of time)
Set up the phone (connect to wifi, google account, restore my apps [18 of them, just common popular ones, mostly Google actually], and apply a theme
Use it for a couple minutes (enable root and usb debug in Developer Settings, set my apps up, etc)
Restart two or three times without any hiccups
Suddenly, after a random reboot, the boot animation happens twice (instead of only once how it supposed to be)
Phone boots and shows "Android is starting..." and optimizes the apps (104 of them) one by one
Goes to "Starting apps..." and succeeds
The phone shows the lockscreen, but only for approximately 1-2 seconds
Phone reboots
CM boot animation runs twice, once for a long time then again for a shorter period of time
Phone goes through process described above (Android is starting, optimizes, then flashes lockscreen)
This just happens again and again and again
Steps I've taken to try and remedy the issue:
Run: "adb reboot" from computer while phone is optimizing apps
Hard reset the phone by holding the power button for 15 seconds
Run: "adb reboot bootloader" from computer when possible, then go into recovery and wipe both dalvik and normal cache
Swipe on the lockscreen as soon as I see it to see if I can get in (lockscreen does not respond though)
Go into recovery and shut the phone off, then start again
Let it loop for about 2 hours
I had also tried leaving the phone overnight looping, and when I woke, it was still looping, but after a eight or so more hours, I came back and found that it had booted and stayed on (and was working completely normally).
The phone was running stock 4.4.2 completely fine before this (with no reboot issues). I attempted installing the latest version of BlissPop, which exhibits a similar but still different issue (it would always boot into android [and not loop], but after a couple restarts, it showed an error about the System UI crashing that would pop up every time I dismissed it, and continued doing so after each restart after that). CM11 seems to be running well on the phone (but only in my very limited test while transitioning between ROMs and such).
I unfortunately cannot provide a log due to not being able to run any logging app during bootup, but hopefully I have provided enough details above to allow understanding of the issue and maybe bring suggestions on how to fix it. I can provide any more information needed on request. I really would like to get this phone back up and running (and especially on this ROM as I do love the work the creator has put into it).
Sorry for the very large wall of text :| Thank you in advance for any suggestions on how to proceed from here

tartilc said:
My device is a 2013 Moto G XT1031 (Boost Mobile) with Bootloader version 41.05 and the latest CWM recovery.
Click to expand...
Click to collapse
Having not experienced your issue I can't say for certain, but it may be possible you need to update the bootloader to at least 41.13, which is the 4.4.4 KitKat BL? I'd run it past @Meticulus and see if he might have some direction, there. Also, does the theme you apply have a different bootanimation, by any chance? There is a known issue/potential memory leak related to large boot animations on Lollipop that can cause failures at boot or bootloops.

a_gert said:
Having not experienced your issue I can't say for certain, but it may be possible you need to update the bootloader to at least 41.13, which is the 4.4.4 KitKat BL? I'd run it past @Meticulus and see if he might have some direction, there. Also, does the theme you apply have a different bootanimation, by any chance? There is a known issue/potential memory leak related to large boot animations on Lollipop that can cause failures at boot or bootloops.
Click to expand...
Click to collapse
Thank you for the advice I have downloaded a file with the name of falcon_boost_user_4.4.4_KXB21.14-L1.57_57_release-keys-cid9.xml.zip, unzipped it, then flashed according to the directions posted on how to restore the stock firmware. Everything during installation seemed to go smoothly, but at this point, I am stuck again. When I try to boot up, it just shows the splash screen ("Warning Bootloader Unlocked") and stays there indefinitely :| I have hard reset the phone and got into boootloader, which states that I am now on 41.13, but it just stays at that splash screen Should I boot into TWRP and try flashing an update.zip of the stock 4.4.4 Boost ROM? What else can I try?
EDIT: Flashing the stock update did not work, but I was able to install CM11 (so I'm am on bootloader 41.13 with CM11 currently)
EDIT TWO: Yes! I'm on bootloader 41.19 now and official CM12.1 nightly is booting!!
EDIT THREE: NOOOO It just started bootlooping again! CM animation twice, "Android is starting...", lockscreen, then cycle again. It happened after I changed my DPI from 320 to 280 (never restarted, just looped from then on).

I now have a logcat! I'm having trouble understanding what it is talking about, but I started logging as soon as the "Android is starting..." box changed status from "Optimizing apps x of x" to "Starting apps" and then stopped logging after a couple seconds of the boot animation. It is attached below (split into three parts).
EDIT: Attached what might be a better logcat reading (recording started right before lockscreen showed, I tried unlocking it, then stopped as soon as I saw the blue animation)

tartilc said:
Thank you for the advice I have downloaded a file with the name of falcon_boost_user_4.4.4_KXB21.14-L1.57_57_release-keys-cid9.xml.zip, unzipped it, then flashed according to the directions posted on how to restore the stock firmware. Everything during installation seemed to go smoothly, but at this point, I am stuck again. When I try to boot up, it just shows the splash screen ("Warning Bootloader Unlocked") and stays there indefinitely :| I have hard reset the phone and got into boootloader, which states that I am now on 41.13, but it just stays at that splash screen Should I boot into TWRP and try flashing an update.zip of the stock 4.4.4 Boost ROM? What else can I try?
EDIT: Flashing the stock update did not work, but I was able to install CM11 (so I'm am on bootloader 41.13 with CM11 currently)
EDIT TWO: Yes! I'm on bootloader 41.19 now and official CM12.1 nightly is booting!!
EDIT THREE: NOOOO It just started bootlooping again! CM animation twice, "Android is starting...", lockscreen, then cycle again. It happened after I changed my DPI from 320 to 280 (never restarted, just looped from then on).
Click to expand...
Click to collapse
Whoa, that's a lot of jumps! Be careful with the bootloader, as once you're on the Lollipop BL (and it appears you've already made that jump), you're kind of locked into LP ROMs from this point out. The point you were failing on the 4.4.4 stock would probably have been a good time to go in and manually restore things via fastboot just to make sure all your partitions were straight. What did you use to update your bootloader to 41.19? And have you tried a ROM specifically designated for the CDMA-only XT1031/Boost? I've only used the Meticulus and the unofficial Linaro CM12.1 buld by Cody on my XT1028 specifically because I know they're CDMA compatible, so I'm not sure where the official CM12.1 sits on that right now.
I know there exists an actual legitimate stock 5.0.2 Boost ROM and it's possible that may be able to be restored manually as a last resort, so don't move too hastily.

XPOSED on Meticulous Rom?
Is there any way to get XPOSED working? I really want gravity box for LL.

Awesome. I was going to download this from your site today but it is showing an error with connecting to its database. None of the computers i have access to can get on your site.

no wifi no cellular network
and after i flashed cynogenmod 12.0 in my moto g 2014, there is no wifi nor network :'( what am i suppose to do now?

Ui crash
Is there anything special i need to do to flash this update? i'm running on the 408 build and every time i try ti go the next version there is an issue. Either data stops working or i get a system Ui crash like on the 530 build. I would love to get this issue fixed with the 606 build. Besides that, great job.

a_gert said:
Whoa, that's a lot of jumps! Be careful with the bootloader, as once you're on the Lollipop BL (and it appears you've already made that jump), you're kind of locked into LP ROMs from this point out. The point you were failing on the 4.4.4 stock would probably have been a good time to go in and manually restore things via fastboot just to make sure all your partitions were straight. What did you use to update your bootloader to 41.19? And have you tried a ROM specifically designated for the CDMA-only XT1031/Boost? I've only used the Meticulus and the unofficial Linaro CM12.1 buld by Cody on my XT1028 specifically because I know they're CDMA compatible, so I'm not sure where the official CM12.1 sits on that right now.
I know there exists an actual legitimate stock 5.0.2 Boost ROM and it's possible that may be able to be restored manually as a last resort, so don't move too hastily.
Click to expand...
Click to collapse
Yeah that is a lot of jumps I'd be hella nervous myself lol
K well guys today is your day , as a_gert stated there is a boost 5.02 , and it does work fine on any cdma xt1031 so first flash that
-depending on signal you may wish to update your modem also there is only 4.4 modem for boost public
Buuuutttt nvm all that for now
The problem the ONLY problem I have had when bootlooping was that it was not prepped correctly and my phone came with 41.19 and came unlocked-
1.) Make sure you are on c/O SuperR-Developer -- PhilZ-Touch-6.59.0_LPK .img OR twrp * twrp-2.8.6.0.1-falcon_STOCK.img
**Notice For Even PhilZ I only Named the -IMG- Version which means flash it with adb properly please
***if ever after you flash it via recovery it will show partition mismatch which apparently is no problem just that the custom recovery does not match the factory one is all.. ..
1.) Download PhilZ-Touch-6.59.0-LPK.img to PC
2.) Reboot to bootloader
3.) Plug phone into PC
4.) Open terminal in directory where the img is located
5.) Issue the following command:
Code:
fastboot flash recovery twrp-2.8.6.0.1-falcon_STOCK.img
2.) Do a format of System w/EXT4 AND REBOOT INTO RECOVERY
3.) Format dalvik/art + Cache + Data w/EXT4 & REBOOT INTO RECOVERY
4.) Format Data PLUS data/media with f2fs then Do the 'factory wipe' then manually format data/media with f2fs again please ..
- SIDELOAD THE ATTACHED STOCK LOLLIPOP NO GAPPS GIVE IT TEN MINUTES REBOOT FEW TIMES/ POWER DOWN ONCE & REBOOT AGAIN
5.) Reboot into recovery and flash the first zip I have attached (I_nomodem is just IF you find your 4.4 radio baseband worked better and want to format it for LP again in the future WITHOUT LP radio included)
****EDIT - SEE VERY BOTTOM OF POST CENTERED AREA LOL
6.) Power off & reboot into recovery manually
7.) Flash your Rom (OR STOCK LOLLIPOP DEBLOATED AGAIN) + Kernel(if any custom one) + Gapps -wait 5-15 minutes for initial boot
* I recommend AeroKernel for the included stock lollipop 5.0 debloated if not the stock kernel or after flashing and few reboots to settle ,just follow instructions from that thread if any are needed..
Please anyone with any moto g don't think updating your bootloader is needed or even really safe whatsoever it is THE main reason moto phones get bricked or messed up otherwise it is not necessary or any kind of improvement yes once you are on an LP one leave it be..
Other flashing yeah okay, bootloader no if so proceed with utmost caution.
After this your modem will be updated with the cdma LolliPop one, if you have any signal issues or what not go to the stock modems section for your specific phone and flash the one for your specific carrier and/or find the "update RIL" flash thingie on here in moto G section and follow instructions but the boost modems work on all cdma variants of Moto G..
For whatever reason I could not upload files to xda I tried five times it kept dying so here there are on googldrive :good:
**Do not Click individual Item Use the Download Arrow At the Very Top of Page to DL the zip properly plz
1.) Falcon LolliPop Part Updater + Modem
2.) Falcon LolliPops Part Updater (No Modem)​
_____________________________________________________________________________________________________________________________
--EDIT #2-- LolliPop 5.0 Falcon XT1031 debloated
SIDENOTE: IF YOU FORMAT DATA/MEDIA & DO NOT KNOW HOW TO SIDELOAD THE ABOVE STOCK DEBLOATED ZIP I'M PRETTY SURE YOU'RE NOT GONNA LIVE TO TELL BOUT IT
BE PREPARED TO SIDELOAD - REBOOT IMMEDIATELY AFTER SIDELOAD THE ZIP ROM IS COMPLETE NOT INTO RECOVERY NOT ANYWHERE ELSE SYSTEM REBOOT
-And wait 5-10 Minutes For First Boot - You Only Need to Do this for the first LP rom loadin after that normal flashing do NOT format data/media anymore after this initial setup
--You can try to just use the script, but it did not work for me after many tries the above was the real solution and has been perfect since
2,3,4,5,6,7
·Install flashable (Boost Mobile/CDMA XT1031 only):
·Download falcon_PhilZ-Touch-6.59.0_LPK.zip to phone
·Reboot into current custom recovery
·Flash zip
·Enjoy!
Use the script again to prepare you partition properly anytime you are about to flash a new rom clean after factory wipe/ format is done..
As I said before data/media is never necessary again after this and MAY not be this time but it is the only thing that kept me out of bootloops ,and if you do it yeah it will force you to sideload your rom it erases all leftovers and your rom zips off the internal card and formats them for fresh start The script does not format /media guys k no worries
------TWRP 2.8.6..1 does not seem to restore properly- -system write only thing .. PhilZ-Touch is fine as is twrp-2.8.6..0 also

Nice, got 41.19 BL!
I tested this and works fine, now i have my shiny new moto g running AICP. Thanks @shoobiedoobiiwhompwop!

rammsteinaus said:
I tested this and works fine, now i have my shiny new moto g running AICP. Thanks @shoobiedoobiiwhompwop!
Click to expand...
Click to collapse
K welcome
Arrite guys for a little clearer step by step see here please apologies carrying on and on I have been gone quite some time here http://forum.xda-developers.com/mot...-moto-g-xt1031-lollipop-t3132974#post61346260
It actually Runs really nice, really REALLY nice once the system app package I am adding shortly was used and tweaked out ..

Is it safe to flash cyanogenmod onto the verizon moto G - 1028 4.3 plus
Hello community ,
I had serious problems flashing cyanogenmod onto a galaxy S3 that was running stock 4.3 , verizon bricked my S3 , and said that the software was not authorized by Verizon. Does this problem exist across the board for any verizon phone running 4.3 or higher ?? If so ... then anything to do with flashing cyanogenmod onto a verizon phone should have warnings in BIG RED LETTERS ... because you cannot even buy a new phone with 4.2 on it anymore.

Issues flashing cm12.1 on XT1031 Please Help
Tried flashing the second to last release on 2 of my moto g xt1031's and I keep getting diff issues. This is what I did:
I had complete stock 4.4.4
unlocked bootloaders,
flashed latest TWRP,
Did a factory wipe
Flashed CM12.1
Flashed Gapps
Rebooted
Stuck in boot loop--> waited over 30mins and rebooted a few times. No luck.
I heard to try flashing CM11 first, then flashing 12.1 so I did this:
Back to TWRP -->factory wipe
Flash cm11
reboot to cm11
reboot to TWRP -->factory wipe
Flash CM12.1
Now I can get past the boot logo and begin setup, however, it will randomly reboot to the boot logo and then back to setup after a minute or so- erasing anything I've already input. Sometimes I could make it through the setup to the desktop, but then it would do the same thing. Had this same exact issue on both of my xt1031s with the same process used for both.
After this I tried doing a factory wipe and then also wiping /data and /system in the advanced wipe options and then flashing cm12.1 and still had the same issue of the rebooting. At some point I must have done somthing, but I started trying to just flash cm12.1 several times over to see if it would stick and I noticed when I did the factory wipe I was getting a parsing error so I tried doing a full data format, and fix data filesystem. I'm not sure what format it was supposed to be so I did a ex4. THat stopped the parsing error, but still having the same issues.. any help would be appreciated.

Moto G CDMA issues
citizen3rased said:
Tried flashing the second to last release on 2 of my moto g xt1031's and I keep getting diff issues. This is what I did:
I had complete stock 4.4.4
unlocked bootloaders,
flashed latest TWRP,
Did a factory wipe
Flashed CM12.1
Flashed Gapps
Rebooted
Stuck in boot loop--> waited over 30mins and rebooted a few times. No luck.
I heard to try flashing CM11 first, then flashing 12.1 so I did this:
Back to TWRP -->factory wipe
Flash cm11
reboot to cm11
reboot to TWRP -->factory wipe
Flash CM12.1
Now I can get past the boot logo and begin setup, however, it will randomly reboot to the boot logo and then back to setup after a minute or so- erasing anything I've already input. Sometimes I could make it through the setup to the desktop, but then it would do the same thing. Had this same exact issue on both of my xt1031s with the same process used for both.
After this I tried doing a factory wipe and then also wiping /data and /system in the advanced wipe options and then flashing cm12.1 and still had the same issue of the rebooting. At some point I must have done somthing, but I started trying to just flash cm12.1 several times over to see if it would stick and I noticed when I did the factory wipe I was getting a parsing error so I tried doing a full data format, and fix data filesystem. I'm not sure what format it was supposed to be so I did a ex4. THat stopped the parsing error, but still having the same issues.. any help would be appreciated.
Click to expand...
Click to collapse
Hello Citizen 3 , You are farther along than me. I have only successfully flashed cyanogenmod once , and that was on an S3 so it was straightforward. I still have not unlocked my bootloader. I have not been able to copy and paste the long strings of characters from motorola , inside command prompt. It would be so nice if Meticulus or one of the other developers could get this to be an official release. The Moto G , and a few other inexpensive phones ( LG realm , Kyocera Hydro latest version ) would work like greased lightning , if they were running CM12. Any help that you could offer with pasting the strings of unlock code would be so appreciated.

In a right mess trying to return to stock

Please could someone help ! I'm trying to unlock my XT1032. I have the correct Sim-Unlock (network unlock) code from my old telco, but... it won't work because the phone is rooted, bootloader unlocked (S-ON) running CM13.
I figured that returning it to a stock build would allow me to unlock the phone, then I could re-root and return to CM13 on my new network.
However..... there are about a dozen guides on returning a Moto G to stock and the first one I tried left the phone stuck on the 'Warning: Bootloader is unlocked' message. Since then, I've tried several other guides and have got nowhere fast. I've been on this for four hours now and the only thing I seem to be able achieve is to get TWRP or CWM recovery on there by flashing from fastboot. Every other image I try either gives 'preflash validation failed' messages, sticks on the Bootloader Unlocked screen or gets it stuck in a bootloop!
I just want to switch networks... Why is this so bloody difficult ?

What Firmware did your XT1032 originally come with? or which Carrier?

Kitkat I think, and it's Tesco (UK).
I subsequently did the OTA update to Lollipop and then.... WHOAAAAA.... hold on... it's booting !!!
I don't know how, or what I've done to get this far, but the only thing I can think of that's changed is that the battery is now at 100% charge. It appears as though it's successfully flashed the 5.1 untouched ROM from http://forum.xda-developers.com/devdb/project/?id=7981#downloads
But, I've tried flashing that loads of times this evening and it's failed everytime.
Having said that it's booting, it's sitting here on the Motorola logo - and it hasn't got that far in the last five hours.... I'll be back shortly !
Update: It worked ! It completed the boot, I put the new SIM in, it asked for the unlock code and this time it worked OK. Now I'm tackling putting CM13 back on it. I think I'll stick with TWRP rather than CWM recovery, as long as TWRP can handle the automatic updating for the CM nightlies.
I have no idea what went wrong there - maybe it was just that the battery had to be at 100% ?? Who knows... Thankfully I doubt I'll be tackling that again !

I don't know if things have changed, but I would be careful with OTA Updates in CM. People have hard-bricked (phone is effectively destroyed) applying updates in this way. I also suggest you avoid official Motorola updates, rather use the factory firmware images available here: (which already include the content of OTA Updates)
[INDEX] Moto G [Falcon][Peregrine] Factory Firmware Images​

Thanks for replying anyway mate. In the end, it's all good now. Unlocked and back on CM13 and on my new network !

Ahhh... not so good after all. The phone reboots every time you try to uninstall an app. I've tried flashing back to CM12.1, the latest stable release, and it does the same, so I've obviously screwed something up along the way.
Could someone help me flatten this thing completely and get it working normally please?
I've tried reflashing loads of times, even tried Cyanogen Recovery instead of TWRP but nothing I do gets rid of this reboot problem.
Can anyone assist please?

OK, so I've followed the procedure detailed here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 and flashed the Untouched 5.0.2. EU Stock ROM successfully, but it still reboots when you try to uninstall any app.
Whatever it is that's causing this is not getting overwritten by the flashing procedures I'm using is it ?
HELP !!!!!

@aneng64 - You have not done what I told you to do. Read my post again.

Yes I did... and I still had the same problem. It was only once I stopped trying to flash zips from TWRP and used mfastboot to flash the whole set individually (non-hlos, motoboot etc) that I got it to behave. The issue, incidentally, seemed to be the same one mentioned elsewhere here that also causes settings to crash when you try to go into settings, security.
Once it was stable with a stock ROM, I was able to flash CM13 again and it's now sorted. Thanks for your help anyway.

Every Custom ROM crashes at system setup wizard in Verizon Galaxy S3

I have a Verizon Galaxy SCH-I535, it had Android 4.3, but I downgraded it to 4.1.2 creating a custom-stock ROM.
Now I rooted it, unlocked the bootloader, installed TWRP 3.0.0 and tested other recoveries as well, and also flashed several ROMs, all of them correctly but when the ROMs starts, just about to show the FIRST SCREEN of the Setup Wizard, the image crashes and shows blinking colored dots.
At the end the only ROM I can have booted is the 4.1.2 that I saved.
Can anyone tell me how can I do to have a different ROM installed, and thta is correctly booted,thanks.

aaronkish said:
I have a Verizon Galaxy SCH-I535, it had Android 4.3, but I downgraded it to 4.1.2 creating a custom-stock ROM.
Now I rooted it, unlocked the bootloader, installed TWRP 3.0.0 and tested other recoveries as well, and also flashed several ROMs, all of them correctly but when the ROMs starts, just about to show the FIRST SCREEN of the Setup Wizard, the image crashes and shows blinking colored dots.
At the end the only ROM I can have booted is the 4.1.2 that I saved.
Can anyone tell me how can I do to have a different ROM installed, and thta is correctly booted,thanks.
Click to expand...
Click to collapse
I have my old S3 running CleanRom and I've for the most part never had an issue with the setup wizard on that device. On others have. Are you clearing the cache and the dalvik after flashing the rom?
Sent from my Nexus 6

ShapesBlue said:
I have my old S3 running CleanRom and I've for the most part never had an issue with the setup wizard on that device. On others have. Are you clearing the cache and the dalvik after flashing the rom?
Sent from my Nexus 6
Click to expand...
Click to collapse
Yes, I always clean cache, dalvik, system, data and even internal storage.
I have tried with:
(5.0.2)aicp_d2vzw_lp-8.0-RELEASE-20150210
(5.1.1)aicp_d2vzw_lp-9.0-NIGHTLY-20150605
(5.1.1)cm-12.1-20150606-NIGHTLY-d2vzw
(5.1.1)OCT-L-M6-FINAL-5.1.1-20151229-d2vzw
(5.1.1)Slim-d2vzw-5.1.1.beta.0.12-OFFICIAL-20151116-0147
(6.0.1)Broken-v4.6-d2vzw-6.0.1-OFFICIAL-20160503
(6.0.1)Slim-d2vzw-6.0.1.alpha.0.2-WEEKLY-20160628-0745
No luck with any of those, but I restored the backup I did before(Android 4.1.2), and everythings works fine. Funny thing is that it even shows the screen for "Updating apps 1 of 83" and so, but when it "wants" to start it crashes and reboots in a few seconds.
But, anyways, that is past now, I lost my mind and flashed the stock 4.3, it hardbricked my phone, I used the unbrick method for 4.4.2 and I don't know how I ended up with the wrong kernel so there is no going back now, I flashed stock 4.4.2, so no downgrade possible now.
I have read about JTAG solution to downgrade, is it possible?
I bought the Octoplus Dongle for Samsung Lite, but I don't think it works for this type of problem.
I will ask in a different thread. Thanks anyways.

aaronkish said:
Yes, I always clean cache, dalvik, system, data and even internal storage.
I have tried with:
(5.0.2)aicp_d2vzw_lp-8.0-RELEASE-20150210
(5.1.1)aicp_d2vzw_lp-9.0-NIGHTLY-20150605
(5.1.1)cm-12.1-20150606-NIGHTLY-d2vzw
(5.1.1)OCT-L-M6-FINAL-5.1.1-20151229-d2vzw
(5.1.1)Slim-d2vzw-5.1.1.beta.0.12-OFFICIAL-20151116-0147
(6.0.1)Broken-v4.6-d2vzw-6.0.1-OFFICIAL-20160503
(6.0.1)Slim-d2vzw-6.0.1.alpha.0.2-WEEKLY-20160628-0745
No luck with any of those, but I restored the backup I did before(Android 4.1.2), and everythings works fine. Funny thing is that it even shows the screen for "Updating apps 1 of 83" and so, but when it "wants" to start it crashes and reboots in a few seconds.
But, anyways, that is past now, I lost my mind and flashed the stock 4.3, it hardbricked my phone, I used the unbrick method for 4.4.2 and I don't know how I ended up with the wrong kernel so there is no going back now, I flashed stock 4.4.2, so no downgrade possible now.
I have read about JTAG solution to downgrade, is it possible?
I bought the Octoplus Dongle for Samsung Lite, but I don't think it works for this type of problem.
I will ask in a different thread. Thanks anyways.
Click to expand...
Click to collapse
Did you update the radio/baseband to NE1? No need to utilize a jtag as your flashing custom roms so the device is already bootloader unlocked
Edit: nevermind you updated to the latest stock so as you already know your bootloader is locked
Sent from my Nexus 6

Has Anyone Gotten a Custom ROM onto a BLN-L24 (US Variant)?

I have tried quite a few ROMs, and all ended up going back to stock firmware because they wouldn't boot. I know I have to format data, and some ROMs ask you to change the data partition as f2fs.
Still, I think that there may be no ROMs that currently work for the US variant. One guy said LOS 13 worked, but when I flashed it, it failed. If someone has gotten it to work, can you please post as many steps as you remember on how to get it work?

Debrand to BLN-L21 following this guide and you're ready to flash cooked ROMs https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050

RedSkull23 said:
Debrand to BLN-L21 following this guide and you're ready to flash cooked ROMs https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
Click to expand...
Click to collapse
Thanks, but wouldn't there be more issues down the line with a debranded phone? What if I soft-bricked my phone, it seems like it'd be really hard to restore? Has anyone actually ever done this on a BLN-L24?

Hello all,
I too am having issues with flashing roms to this device, US variant (BLN-L24). In my particular case, the rom boots up (EliteRom v7.1) and will actually function. However, wifi does not work, as well as I have no sound whatsoever. Youtube also will not play, nor will any videos, which I'm guessing is tied to whatever issue is with the sound. I have flashed multiple times per the step by step instructions, as well as following the Youtube video, all with the same result over the last few days. At this point, my phone is effectively useless to me, though cellular data does still work, just no calls can be answered. Anyone have any suggestions I might be able to follow? Also, even my TWRP backup that I made before installing the rom will not restore at this point. Any help is appreciated, thanks.

Jessooca said:
You must be missing a step or something, because [Elite ROM][EMUI 5.1] Elite ROM v7.1 for Honor 6X by HassanMirza01 works on the L24 us variant without issues, I have none.
Perhaps go back to stock and start over. I haven't had any issues with his rom and I didn't do anything more than what's needed to root/install twrp and flash the rom per his instructions.
Click to expand...
Click to collapse
I just followed the instructions; I believe to the best I could, and I'm stuck in a bootloop now. Which version of EMUI were you on before flashing? I was on EMUI 5.0 which may be my issue.
I started from EMUI 5.0
Unlocked my bootloader
Let it factory reset
Installed the Elite TWRP on the page
Booted to Elite TWRP
Formatted all partitions excpet for external sd card
Reformatted Data to f2fs
Re-wiped data
Checked that it was f2fs
Installed Elite ROM zip
Installed open gapps 7.0 ARM64
Installed the patch
Rebooted
Bootloop

i4ybrid said:
I just followed the instructions; I believe to the best I could, and I'm stuck in a bootloop now. Which version of EMUI were you on before flashing? I was on EMUI 5.0 which may be my issue.
I started from EMUI 5.0
Unlocked my bootloader
Let it factory reset
Installed the Elite TWRP on the page
Booted to Elite TWRP
Formatted all partitions excpet for external sd card
Reformatted Data to f2fs
Re-wiped data
Checked that it was f2fs
Installed Elite ROM zip
Installed open gapps 7.0 ARM64
Installed the patch
Rebooted
Bootloop
Click to expand...
Click to collapse
On one of the attempts that I did for installing, I installed the patch and it put me in a boot loop. Maybe not installing the patch can help you?

I cant get anything to work for the US version. Sure stuff boots but some of it is just broken. On octOS i am unable to use root unless i switch supersu to automatically grant root to apps. I cant get root access by using prompt because nothing pops up. On crdroid i have the same exact issue. Id rather have the prompt than allow any app root access without my knowledge. With ELITE ROM my first boot brings up a home screen with no keyboard. It completely skips any kind of setup screen. I can get the setup screen by flashing a keyboard from an aroma gapps installer but then i lose google services. The US version also seems to be forgotten as for most roms you wont see it anywhere under supported lists.

I've never been able to get a custom rom to work on my BLN-L24. Everything just ends in a never-ending bootloop of frustration.
Though, I have only ever tried with EMUI 5.0+. Maybe an earlier version of EMUI gets better results...?

code_name_duchess said:
I've never been able to get a custom rom to work on my BLN-L24. Everything just ends in a never-ending bootloop of frustration.
Though, I have only ever tried with EMUI 5.0+. Maybe an earlier version of EMUI gets better results...?
Click to expand...
Click to collapse
It really sucks that nothing seems to work. Ive tried flashing using multiple recoveries and ive tried all kinds of flashing to fix issues with the ROMS. Nothing helps. If anyone has successfully gotten a ROM fully working on BLN-L24 they need to tell people exactly what they did step by step.

It seems that for the roms located here, they seem to all assume that the phone has been debranded to bln-l21 variant. I don't know if it has any bearing on the current issues we're all experiencing, but I did notice that all twrps available for this device on the forums state they are the "Open Kirin Edition". It's been a while since I've rooted or rom'd a phone besides this one, but I've never encountered a twrp with a custom name like that.
I know that the developer of the EliteRom had his custom twrp, but is there a different twrp besides that one that does not state it is an "Open Kirin Edition"? Like I said, not sure if it has any bearing on things here, but I've been very confused about that.

TurtlePwr82 said:
It seems that for the roms located here, they seem to all assume that the phone has been debranded to bln-l21 variant. I don't know if it has any bearing on the current issues we're all experiencing, but I did notice that all twrps available for this device on the forums state they are the "Open Kirin Edition". It's been a while since I've rooted or rom'd a phone besides this one, but I've never encountered a twrp with a custom name like that.
I know that the developer of the EliteRom had his custom twrp, but is there a different twrp besides that one that does not state it is an "Open Kirin Edition"? Like I said, not sure if it has any bearing on things here, but I've been very confused about that.
Click to expand...
Click to collapse
For most phone i've ever owned you never had to change the recovery for each ROM. Its confusing. Most recoverys say Open Kirin Edition when booting. What confuses me is why we need to debrand to get the ROMS to work. If the phone pretty much run on the same hardware then why is L24 having so many issues? Why are the devs not testing on these devices?

BakedOnSomeSour said:
For most phone i've ever owned you never had to change the recovery for each ROM. Its confusing
Click to expand...
Click to collapse
Right, that's what I was thinking. For any phone I've ever rom'd, there was always just one twrp that everyone worked from.
Edit: found this while looking through the roll back to stock forum. I don't know if it will help anyone else, but figured I'd put it here as well if it might. All credit for this goes to the original poster johnnyrichter:
johnnyrichter said:
Tried this method after being on LineageOS for a week or two and having poor LTE signal, no MMS, and voicemail issues so I'm trying to go back to stock so I can have a fully functional phone since I rely on it heavily for work. Followed all steps using BLN-L24 B360 firmware. On step 10 I rebooted to update and it went right to "5% Installing Update" and stuck there for 5 mins, then rebooted itself, has been sitting at "honor" boot screen for 14 minutes so I made it reboot to EMUI recovery, wiped/factory reset, rebooted, loaded EMUI afte 2 more minutes. Appears to have worked and hopefully my issues are fixed!
Edit: Signal, mms, and voicemail issues fixed.
Click to expand...
Click to collapse
Hopefully will benefit someone here as well.

When debranding the BLN-L24, and branding it to BLN-L21, are there any issues with the ROMs once they're installed? I imagine the radios, and such are different for the two models??

BakedOnSomeSour said:
Why are the devs not testing on these devices?
Click to expand...
Click to collapse
Devs can only test devices they have in possession. If they don't have your phone model, how are they going to test it?

galapagos said:
Devs can only test devices they have in possession. If they don't have your phone model, how are they going to test it?
Click to expand...
Click to collapse
well, many don't want to give them a phone because most developers here tend to stop work on a ROM and leave people hanging.

I have gotten several ROMs working on L24 variant...
Yes it seems to me any Elite kernel based ROM works or should work on the L24. But /data must be ext4 format. Then even that the ROM works, the fingerprint scanner never allows a complete successful scan. I think because it must be f2fs format for that encryption to work or something. This is the link to those ROMS https://hassanmirza01.blogspot.com/p/custom-roms.html?m=1
On the other hand the LOS based ROMs never work or at least they reboot and the screen is always black or the ROM branding just stays there flashing. This sucks cause I want to run the newest Resurrection ROM but I ask the developer about why I have that problem or how long that ROM takes to boot and I never get an answer. He also just put a new beta AOKP ROM up and it does the same black screen thing too.
I am also suspicious it has to do with the version of TWRP. I think some are capable of formatting f2fs correctly or the encryption or whatever. Point is some of the devs need to be a little more consistent answering questions at a minimum. I know it takes time to fix bugs but give us a little heads up.

Kernel and System UI Crash After Leaving Wi-Fi Range [Others?] [H990]

I've had a strange issue with my LG V20 ever since I got in last year and installed LineageOS 18.1 after rooting my H990 on LG firmware 10d (H990ds10d_00_OPEN_AU_DS_OP_1216.kdz) with DirtySanta and installing TWRP. Whenever I left the range of my Wi-Fi network, I would cause the System UI to become unresponsive while doing certain tasks - Unlocking, going to Settings -> Wi-Fi, expanding the Wi-Fi quick toggle in notifications, and probably a few more things.
This doesn't happen on the aforementioned stock firmware, nor on 10g AU 0117 stock firmware either.
For a while, I dealt with it by simply not using Wi-Fi. This sucked because I couldn't access computers over LAN, mobile data was slower, and it also had a data cap that I had to be wary of.
However, I decided I wanted to fix it.
I saw some recommendations involving installing every Lineage version since 14.1 sequentially until the latest. This didn't make sense to me, as clean flashing shouldn't leave any remnants behind, but dirty flashing that many versions went against everything I'd ever heard of regarding custom ROMs.
I also heard that it could be a modem firmware issue. Since I started on the last version of the stock OS for my region vulnerable to DirtySanta I thought surely not.
I later found out about KDZWriter, and used that to install the latest Nougat version of the stock rom available (also mentioned above). After installing that, I tried installing the latest LOS on top, which constantly informed me that com.android.media had stopped, I still had the LG sounds and wallpapers, and I didn't go through the initial setup - A sign of a dirty flash. I was still crashing in the same way too.
I formatted my data partition in TWRP (the "type yes to confirm" way), and tried again. Same crashes.
I've been awake for a little too long trying to fix this, but :
What I believe ended up working was backing up my /efs and /firmware partitions in TWRP while on rooted 10g firmware, dirty flashing LOS on top, formatting data as before, then flashing my /firmware backup in TWRP.
I'm hoping for this thread to document this issue as well as the fixes that worked for people. I saw tidbits of information spread out everywhere, so I'd like a central repository for it.
I hope this caffeine-induced writeup will help someone else with the same or similar issues.
If I have any more experiences with it, I'll do my best to write them down. Please share your experiences too!