Q&A for [MOD][5.0.1 hboot][no red writing]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MOD][5.0.1 hboot][no red writing]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
does this work on 5.1? im using a GPE edition rom.. Thank you.
sinfulmatik said:
does this work on 5.1? im using a GPE edition rom.. Thank you.
Click to expand...
Click to collapse
Are you running just a GPE ROM or did you convert your phone to full gpe?
I updated firmware to VZM 5.0.1 (S-Off) then fully wiped dalvik, data, etc.. and then finally flashed Digital High's LolliGPE rom. Will it still work? My preferred method will be flashing the zip via TWRP Recovery. Thanks!
sinfulmatik said:
I updated firmware to VZM 5.0.1 (S-Off) then fully wiped dalvik, data, etc.. and then finally flashed Digital High's LolliGPE rom. Will it still work? My preferred method will be flashing the zip via TWRP Recovery. Thanks!
Click to expand...
Click to collapse
Yea you will be fine to flash this hboot unfortunately it's via fastboot only. Have you ever used fastboot before?
I see. Good to know. Thanks tiger. As for fastboot, i have done simple commands before thanks to great tutorials here on XDA.
Related
[Q&A] [KERNEL] (013) KK442 GSM(3.4+ Hybrid/OC/Intelliplug/active/FauxSound)[08-02-20
Q&A for [KERNEL] (013) KK442 GSM(3.4+ Hybrid/OC/Intelliplug/active/FauxSound)[08-02-2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] (013) KK442 GSM(3.4+ Hybrid/OC/Intelliplug/active/FauxSound)[08-02-2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Rebooting Error
I flashed the zip file on KK 4.4.4, boots successfully but cant get beyond lock screen it just reboots the phone. Tried wiping cache and dalvik cache before flashing but to no avail.
Any help from you guys will be appreciated...
Bhatyasirr said:
I flashed the zip file on KK 4.4.4, boots successfully but cant get beyond lock screen it just reboots the phone. Tried wiping cache and dalvik cache before flashing but to no avail.
Any help from you guys will be appreciated...
Click to expand...
Click to collapse
Which kernel version?
Which firmware (region)?
BTW I suggest to download again and flash the same zip.
remo0073 said:
Which kernel version?
Which firmware (region)?
BTW I suggest to download again and flash the same zip.
Click to expand...
Click to collapse
falcon_umts-faux123-kk-443-014m.zip
Im on Asian Stock 4.4.4 (Xt1033)
Downloaded again and flashed same problem again..
No OC
I have flushed the latest release for kitkat and everything seems to be fine except the OC. it still has the max freq of 1.19ghz...
any sloutions:crying::crying::crying:
dipro_tanvir said:
I have flushed the latest release for kitkat and everything seems to be fine except the OC. it still has the max freq of 1.19ghz...
any sloutions:crying::crying::crying:
Click to expand...
Click to collapse
No solution
OC is not possible
alsom my zram on doesnt stick......what can i do
I reverted back to stock kernel, but wifi is not working now any suggestions?
Q&A for [4.2.2][MIUIv5 4.2.7] XT926
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [4.2.2][MIUIv5 4.2.7] XT926. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bootloop
Hi guys. Umpteenth time i tried to flash my xt926 with my favorite os miui, but i just have a bootloops, with moto logo.
I did all necessary wipes before and after flash, and i tried without wipe after flash but result is the same.
During flashing i have some message like md5 check skipped or failed, cant remeber all text.
Give me please precious advice, how to solve problem.
I had miui on defy+, and i can say that miui is the best that happened with android.
Recovery- last twrp, kitkat.
Sorry, but unfortunately my english is not perfect.
Motorola XT926 32Gb
VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF - Firmware
Bootloader Unlocked
TWRP 2.7.1.0
1) Full wipe
2) Instal zip
3) Wipe Cashe/Dalvik
4) Reboot
About 5 min I see motorola dual core technology boot logo, reboot and logo again. What I did wrong?
Wanted to check if anyone knew about a gsm build of miui for JB...I really liked this roms interface but couldn't play with it much as the sms is screwed up.... USSD codes for my carrier wont work... I don't want to upgrade to kk because it doesn't work as a daily driver for me.... Currently i am on the nexesque 3.6
Q&A for [ROM][OFFICIAL][Lollipop 5.0][Obake] PAC-ROM LP Beta-1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][Lollipop 5.0][Obake] PAC-ROM LP Beta-1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
dogie425 said:
trying to install this on a droid ultra xt1080 4.4.4 bootloader unlocked with sunshine, twrp2.8.4.0 can't get it to boot this rom followed all instructions, downloaded multiple times and boot loop is all i get really could use some ideas if any1 could. if i don't do the factory reset it will boot but gives me the warning about the ustable system
Click to expand...
Click to collapse
The only way I was able to get CM12 roms working was to flash a CM11 rom and gapps, let it boot all the way through and then flash CM12 over it without doing any wipes. I noticed user morr22066 had the same issue and his post helped me fix it.
SnipeR_TT said:
The only way I was able to get CM12 roms working was to flash a CM11 rom and gapps, let it boot all the way through and then flash CM12 over it without doing any wipes. I noticed user morr22066 had the same issue and his post helped me fix it.
Click to expand...
Click to collapse
thanks for the heads up. let frustration set in and must have missed that post. I flashed the gummy rom i already had on hand gapps too and then flash the lp pac rom and gapps , I did do a factory reset and wiped the cache and dalvik tho will see how things work out for me
What are the main differences between PAC and CM12?
important question
Hello, I have a Droid Mini, as if I did not install CM12 me all outgoing contacts are set as "Unknown"! Much to ask, show me how to set the CM12 or purely whatever contacts had no problems? Thank you!
Best rom for my XT1080M so far.
It has one problem though. I don't seem to be able to remove built-in apps with root explorer. They all come back after every time I reboot the cell phone. Looking forward to a stable version.
Q&A for [ROM] D801 TMO LP Extreme v1.0 4/16/15
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] D801 TMO LP Extreme v1.0 4/16/15. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Like the Rom, but I have a quick question. I noticed it now shows my phone as an F350k, so how can I access the engineering menu? The standard D801 code no longer works. Thanks again for posting this Rom.
How do I flash this?
Can I flash both the files with recovery or do I flash through fastboot?
bbtinc70 said:
Like the Rom, but I have a quick question. I noticed it now shows my phone as an F350k, so how can I access the engineering menu? The standard D801 code no longer works. Thanks again for posting this Rom.
Click to expand...
Click to collapse
It was changed to F350k to unlock the camera's 4k video and slow motion recording. Try 350 and see if that works.
vasanth_8788 said:
Can I flash both the files with recovery or do I flash through fastboot?
Click to expand...
Click to collapse
Both need to be flashed via TWRP.
MicroMod777 said:
It was changed to F350k to unlock the camera's 4k video and slow motion recording. Try 350 and see if that works.
Both need to be flashed via TWRP.
Click to expand...
Click to collapse
So when you say full wipe you mean everything except Internal memory?
vasanth_8788 said:
So when you say full wipe you mean everything except Internal memory?
Click to expand...
Click to collapse
If your coming from another rom other than 30b, then full wipe, but not internal memory. Never wipe internal memory.
Viper not universal
Is there anyway to get viper to work universally with all media?
In K.K viper could work with youtube and audible but with this ROM itll only work with music players.
I apologize if this has been discussed before , I couldnt find it.
Q&A for [ROM] D801 TMO G2 Lollipop 30b Stock rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] D801 TMO G2 Lollipop 30b Stock rom. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Does flashing the SuperSU give me root?
I flashed your Extreme Rom and want to check out your stock version. Do I follow the instructions exactly and flash bootstack again? Also, I'm not familiar with flashing SuperSU, will this give me root? I don't have computer access this weekend so I want to double check before I make a mistake. Thanks again for all your efforts.
bbtinc70 said:
I flashed your Extreme Rom and want to check out your stock version. Do I follow the instructions exactly and flash bootstack again? Also, I'm not familiar with flashing SuperSU, will this give me root? I don't have computer access this weekend so I want to double check before I make a mistake. Thanks again for all your efforts.
Click to expand...
Click to collapse
You only need to flash the 30b bootstack once and can dirty flash the stock rom without wiping anything. Flashing SuperSU will give you root as the stock rom is stock without root.