[Q&A] [KERNEL] (013) KK442 GSM(3.4+ Hybrid/OC/Intelliplug/active/FauxSound)[08-02-20 - Moto G Q&A, Help & Troubleshooting

[Q&A] [KERNEL] (013) KK442 GSM(3.4+ Hybrid/OC/Intelliplug/active/FauxSound)[08-02-20
Q&A for [KERNEL] (013) KK442 GSM(3.4+ Hybrid/OC/Intelliplug/active/FauxSound)[08-02-2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] (013) KK442 GSM(3.4+ Hybrid/OC/Intelliplug/active/FauxSound)[08-02-2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Rebooting Error
I flashed the zip file on KK 4.4.4, boots successfully but cant get beyond lock screen it just reboots the phone. Tried wiping cache and dalvik cache before flashing but to no avail.
Any help from you guys will be appreciated...

Bhatyasirr said:
I flashed the zip file on KK 4.4.4, boots successfully but cant get beyond lock screen it just reboots the phone. Tried wiping cache and dalvik cache before flashing but to no avail.
Any help from you guys will be appreciated...
Click to expand...
Click to collapse
Which kernel version?
Which firmware (region)?
BTW I suggest to download again and flash the same zip.

remo0073 said:
Which kernel version?
Which firmware (region)?
BTW I suggest to download again and flash the same zip.
Click to expand...
Click to collapse
falcon_umts-faux123-kk-443-014m.zip
Im on Asian Stock 4.4.4 (Xt1033)
Downloaded again and flashed same problem again..

No OC
I have flushed the latest release for kitkat and everything seems to be fine except the OC. it still has the max freq of 1.19ghz...
any sloutions:crying::crying::crying:

dipro_tanvir said:
I have flushed the latest release for kitkat and everything seems to be fine except the OC. it still has the max freq of 1.19ghz...
any sloutions:crying::crying::crying:
Click to expand...
Click to collapse
No solution
OC is not possible

alsom my zram on doesnt stick......what can i do

I reverted back to stock kernel, but wifi is not working now any suggestions?

Related

[Q&A] [4.2.2][MIUIv5 4.2.7] XT926

Q&A for [4.2.2][MIUIv5 4.2.7] XT926
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [4.2.2][MIUIv5 4.2.7] XT926. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bootloop
Hi guys. Umpteenth time i tried to flash my xt926 with my favorite os miui, but i just have a bootloops, with moto logo.
I did all necessary wipes before and after flash, and i tried without wipe after flash but result is the same.
During flashing i have some message like md5 check skipped or failed, cant remeber all text.
Give me please precious advice, how to solve problem.
I had miui on defy+, and i can say that miui is the best that happened with android.
Recovery- last twrp, kitkat.
Sorry, but unfortunately my english is not perfect.
Motorola XT926 32Gb
VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF - Firmware
Bootloader Unlocked
TWRP 2.7.1.0
1) Full wipe
2) Instal zip
3) Wipe Cashe/Dalvik
4) Reboot
About 5 min I see motorola dual core technology boot logo, reboot and logo again. What I did wrong?
Wanted to check if anyone knew about a gsm build of miui for JB...I really liked this roms interface but couldn't play with it much as the sms is screwed up.... USSD codes for my carrier wont work... I don't want to upgrade to kk because it doesn't work as a daily driver for me.... Currently i am on the nexesque 3.6

[Q&A] [ROM][MOD]OnePlus One Official AOSP Unofficially flappified! v4.4.4 Updated 9/

[Q&A] [ROM][MOD]OnePlus One Official AOSP Unofficially flappified! v4.4.4 Updated 9/
Q&A for [ROM][MOD]OnePlus One Official AOSP Unofficially flappified! v4.4.4 Updated 9/1/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][MOD]OnePlus One Official AOSP Unofficially flappified! v4.4.4 Updated 9/1/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I tried clean flash..
Device just kept rebooting. I think its a radio or carrier issues. When ever my bars come upbas connected on tmoible it reboots the phone. Seems to work for about 20-40 seconds before that point. Did clean flash wiped internal storage just to check. Well tried everything I couod think of.... Any suggestions would be great.
I see that I'm not the one, who has problems with bootloop. I have tried the aosp rom from Jamal2367 and then this rom, after flashing both rooms my device does a reboot while booting or if I have luck in the language settings :/ does anyone have an idea, how to fix it?
P.S. I have already tried different versions of TWRP... wiping internal storage didn't help too
Boot loops
Rom installed and booted up but after 5 sec it starts restarting ...
Happens everytime it boots up running cm11s 44s stock kernel latest twrp recovery also tried installing it over cm12s but same problem consits i really want a kitkat AOSP rom

[Q&A] [ROM][OFFICIAL][Lollipop 5.0][Obake] PAC-ROM LP Beta-1

Q&A for [ROM][OFFICIAL][Lollipop 5.0][Obake] PAC-ROM LP Beta-1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][Lollipop 5.0][Obake] PAC-ROM LP Beta-1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
dogie425 said:
trying to install this on a droid ultra xt1080 4.4.4 bootloader unlocked with sunshine, twrp2.8.4.0 can't get it to boot this rom followed all instructions, downloaded multiple times and boot loop is all i get really could use some ideas if any1 could. if i don't do the factory reset it will boot but gives me the warning about the ustable system
Click to expand...
Click to collapse
The only way I was able to get CM12 roms working was to flash a CM11 rom and gapps, let it boot all the way through and then flash CM12 over it without doing any wipes. I noticed user morr22066 had the same issue and his post helped me fix it.
SnipeR_TT said:
The only way I was able to get CM12 roms working was to flash a CM11 rom and gapps, let it boot all the way through and then flash CM12 over it without doing any wipes. I noticed user morr22066 had the same issue and his post helped me fix it.
Click to expand...
Click to collapse
thanks for the heads up. let frustration set in and must have missed that post. I flashed the gummy rom i already had on hand gapps too and then flash the lp pac rom and gapps , I did do a factory reset and wiped the cache and dalvik tho will see how things work out for me
What are the main differences between PAC and CM12?
important question
Hello, I have a Droid Mini, as if I did not install CM12 me all outgoing contacts are set as "Unknown"! Much to ask, show me how to set the CM12 or purely whatever contacts had no problems? Thank you!
Best rom for my XT1080M so far.
It has one problem though. I don't seem to be able to remove built-in apps with root explorer. They all come back after every time I reboot the cell phone. Looking forward to a stable version.

[Q&A] [KERNEL] [15 May] [920F & 920S] [AOD8 Patch] StockMOD Kernel v02d

Q&A for [KERNEL] [15 May] [920F & 920S] [AOD8 Patch] StockMOD Kernel v02d
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] [15 May] [920F & 920S] [AOD8 Patch] StockMOD Kernel v02d. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
GPS does not work properly with Kernel v02d!..
* Please add GPS Fix to thanks ..
can confirm working on 920W8
Editosted in wrong thread by mistake. ignore post
Edit2: The thread I wish to post in redirects me here b/c I am under 10 post.
I wanted to post in the Unikernel thread.
I can confirm that v0.001d does not work with the Sprint G920P variant. Please remove the misleading info from topic title.
If you need a tester to help you get this variant supported, I would be more than happy to help.
Audio stopped working on test9.zip.
Tested on g920f. Back to test6.zip
Ram management is amazing compated to stock
prerelease3
No audio on AOCV
No audio on prerelease7
Stock rooted AOCV g920f
Hello i have a problem, no deep sleep for my s6. Why ? Thanks
Envoyé de mon SM-G925I en utilisant Tapatalk
I have the G925F with 5.1.1 G925FXXU2BOFJ. I was wondering if flashing this kernel is the only way to get root on 5.1.1 G925F as of right now? Is this going to trigger the KNOX fuse protection? I'm guessing I would need to flash this kernel via ODIN,and if so is that going to include TWRP recovery as well? Thanks in advance!
Hey guys. I'm curious does anyone use the USB audio out via otg cable? I know Android is a little picky when trying to connect to a USB DAC/Amp I've gotten it to work pretty well before by changing kernels but I can't remember which one was working out. Anyone have any advice I'd appreciate it. Thanks.
Edit: OK so I don't know what I did to have it working the other day after changing kernels, but I went back and tried every kernel I have previously installed, with no luck. Now I'm confused and disappointed.
Hi guys. Do anyone know that XtreStoLite gonna be based on newest release? And when we can expect it?
So my friend tried rooting his phone with this kernel
his phone kept bootlooping so he entered recovery mode and wiped cache but it didnt change a thing can anyone help
merza kheder said:
So my friend tried rooting his phone with this kernel
his phone kept bootlooping so he entered recovery mode and wiped cache but it didnt change a thing can anyone help
Click to expand...
Click to collapse
Just flash last stock using odin.
SHiFT! said:
Just flash last stock using odin.
Click to expand...
Click to collapse
Ok ill try thanks
Does this work for the galaxy s6 5.1.1 G920FXXU3COI9
With the latest Unikernel "V9" and Kernel Toolkit we can load different Settings Profiles. What settings can I safely use as a Battery Saving profile?
I found that the "interactive" CPU scaling is: 800/2100 for a57 and 400/1500 for a53. Will it lower the battery usage when I adjust those CPU scalings?
Cheers,
Martin
Who has te stock kernel ? I want to recover some files from private mode then flashing this kernel again

[Q&A] [MOD][5.0.1 hboot][no red writing]

Q&A for [MOD][5.0.1 hboot][no red writing]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MOD][5.0.1 hboot][no red writing]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
does this work on 5.1? im using a GPE edition rom.. Thank you.
sinfulmatik said:
does this work on 5.1? im using a GPE edition rom.. Thank you.
Click to expand...
Click to collapse
Are you running just a GPE ROM or did you convert your phone to full gpe?
I updated firmware to VZM 5.0.1 (S-Off) then fully wiped dalvik, data, etc.. and then finally flashed Digital High's LolliGPE rom. Will it still work? My preferred method will be flashing the zip via TWRP Recovery. Thanks!
sinfulmatik said:
I updated firmware to VZM 5.0.1 (S-Off) then fully wiped dalvik, data, etc.. and then finally flashed Digital High's LolliGPE rom. Will it still work? My preferred method will be flashing the zip via TWRP Recovery. Thanks!
Click to expand...
Click to collapse
Yea you will be fine to flash this hboot unfortunately it's via fastboot only. Have you ever used fastboot before?
I see. Good to know. Thanks tiger. As for fastboot, i have done simple commands before thanks to great tutorials here on XDA.

Categories

Resources