Database Info

[Q] F1 : CAMERA FAILED : F1 help plz (Samsung Wave S8500)

hi guys
i have a big problem with my camera because of camera failed plz help me
i tryed to update my camera fw through the ( *#197328640# ) when the update finished and i want to use my camera this error apear (camera failed!) then i decided to change the firmware of the phone to fix this problem but any attempt failed again and again i see camera failled at the next stage i tried STUNE to fix the camera file but it didnt work
now every time i want to see the sw ver of camera this error apear ( can not read camera version )
plz help me to fix this problem
thanx a lot

-- deleted --

http://forum.xda-developers.com/showthread.php?p=12790055#post12790055
Try to read here.
I've never played with CAM Firmware... toooo dangerous.
No idea if you can reanimate CAM.
Best Regards

Eken T01A not working after FW Update.

Hi I got Eken T01A tablet. But last night I forgot to switch off the device, hence the battery got drained completely. After that I charged the device, but when I turn it on I have the battery picture with an exclamation mark.
I searched in Google and found that, reflashing the device will fix the issue. So I re-flashed the device with this FW : t01a-zx-0329_worked-1.img
The battery issue get resolved after this FW update and device get switched ON. But the Display is splitted in to 2 parts ( see the attached image) and touch is not working. The device was completely useless.
So I searched again and downloaded and re-flashed with this FW :sun4i_crane-T01A-V1.4_m7660-20120731. But the issues are not fixed.
The dispaly is showing splitted and the touch is working in opposite direction. That is when I drag horizontally, the device is sensing it as vertical movement and vice-versa. The camera is not working. The screen rotation is working perfectly. When I connect a mouse it will work.
I have attached the screen shots of the device.
Here is the complete details of the device.
Model Number : T01A
Android Version : 4.0.4
Base Band Version : 1.4rc3
Kernel Version : 3.0.8+ [email protected] #53 Jul26 16:44:59 CST2012
Build Number : crane_m 1003h6-eng 4.0.4 IMM76D 20120731
Please help me fixing the issue.
Thanks,
Arun S

arunssasidhar said:
Hi I got Eken T01A tablet. But last night I forgot to switch off the device, hence the battery got drained completely. After that I charged the device, but when I turn it on I have the battery picture with an exclamation mark.
I searched in Google and found that, reflashing the device will fix the issue. So I re-flashed the device with this FW : t01a-zx-0329_worked-1.img
The battery issue get resolved after this FW update and device get switched ON. But the Display is splitted in to 2 parts ( see the attached image) and touch is not working. The device was completely useless.
So I searched again and downloaded and re-flashed with this FW :sun4i_crane-T01A-V1.4_m7660-20120731. But the issues are not fixed.
The dispaly is showing splitted and the touch is working in opposite direction. That is when I drag horizontally, the device is sensing it as vertical movement and vice-versa. The camera is not working. The screen rotation is working perfectly. When I connect a mouse it will work.
I have attached the screen shots of the device.
Here is the complete details of the device.
Model Number : T01A
Android Version : 4.0.4
Base Band Version : 1.4rc3
Kernel Version : 3.0.8+ [email protected] #53 Jul26 16:44:59 CST2012
Build Number : crane_m 1003h6-eng 4.0.4 IMM76D 20120731
Please help me fixing the issue.
Thanks,
Arun S
Click to expand...
Click to collapse
I have Supervox Your Tab, this is clone of Eken T01A. I flashed with FW sun4i_crane-T01A-V1.4_m6225-20120731, and work OK.
Link for FW:
Code:
ftp://202.105.131.8/T01A-V1.4_6225.rar

[Q] [MT6573] Clear Flash Accidentally on Beyond BPad at Recovery Mode

Hello at all,
Please Help Me..........
I bought one tablet called Beyond BPad made in Indonesia with MT6573 CPU.
Why ? Because I'm Indonesian. It has two Sim Cards
Is not the best phone in the world, but it's enough for me for every basics days
So, After install all my applications, and working well... I want make the device better
accidentally, i entered "Recovery Mode" by pressing Back+Down Vol+Power buttons.
I dont know what i'm doing, I choose "Clear Flash". And suddenly, this device cannot start at all. Im tryng to reenter "Recovery Mode" but i cant. Its only showing Android Logo and Triangle with "!".
My questions is:
1. What is happened?
2. How to fix it?
3. Its any hope for me to solve it by tools anyway?
For adds: Ive been to solve it myself. by connected the device to my Notebook Acer Aspire 4730z. I also install the USBdrivers. But, it cannot read the device. Im trying to find the problem. It shows in devices properties that Android Composite Devices said "Currently, this hardware device is not connected to the computer. (Code 45)". is it because i install wrong drivers? Is there anyway to fix this?
when i'm trying to "Factory Mode" it still works.
After I have one menu with:
- Full Test
- Item Test
- Test Report
- Clear Flash
- Version
- Reboot
I choose - Version and it shows:
bb chip : mt6573
ms board. : qishang73_gb
imei1: unknown
imei2: unknown
modem ver.: MAUI.11AMD.W11.37.SP.V8.F2. 2012/03/28 18:04
Bar Code: 040501234567890123456710
Build Time: Fri Apr 13 2012, 12:10:05
UBoot ver: 2010.06
Kernel Ver: 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) #2 PREEMPT Fri Apr 13 2012, 14:04:31 CST
Android Ver.: 2.3.6
SW Ver.: ALPS.GB.FDD2.MP.V3.14
Custom Ver.: release.v2.02
anyone can help my problem? i love this android so much.
thank you for help me.

i think i have the same tablet
rpplt said:
Hello at all,
Please Help Me..........
I bought one tablet called Beyond BPad made in Indonesia with MT6573 CPU.
Why ? Because I'm Indonesian. It has two Sim Cards
Is not the best phone in the world, but it's enough for me for every basics days
So, After install all my applications, and working well... I want make the device better
accidentally, i entered "Recovery Mode" by pressing Back+Down Vol+Power buttons.
I dont know what i'm doing, I choose "Clear Flash". And suddenly, this device cannot start at all. Im tryng to reenter "Recovery Mode" but i cant. Its only showing Android Logo and Triangle with "!".
My questions is:
1. What is happened?
2. How to fix it?
3. Its any hope for me to solve it by tools anyway?
For adds: Ive been to solve it myself. by connected the device to my Notebook Acer Aspire 4730z. I also install the USBdrivers. But, it cannot read the device. Im trying to find the problem. It shows in devices properties that Android Composite Devices said "Currently, this hardware device is not connected to the computer. (Code 45)". is it because i install wrong drivers? Is there anyway to fix this?
when i'm trying to "Factory Mode" it still works.
After I have one menu with:
- Full Test
- Item Test
- Test Report
- Clear Flash
- Version
- Reboot
I choose - Version and it shows:
bb chip : mt6573
ms board. : qishang73_gb
imei1: unknown
imei2: unknown
modem ver.: MAUI.11AMD.W11.37.SP.V8.F2. 2012/03/28 18:04
Bar Code: 040501234567890123456710
Build Time: Fri Apr 13 2012, 12:10:05
UBoot ver: 2010.06
Kernel Ver: 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) #2 PREEMPT Fri Apr 13 2012, 14:04:31 CST
Android Ver.: 2.3.6
SW Ver.: ALPS.GB.FDD2.MP.V3.14
Custom Ver.: release.v2.02
anyone can help my problem? i love this android so much.
thank you for help me.
Click to expand...
Click to collapse
i hope u found a solution for ur problem.... my tablet has the same information u provided ..is there a way i can update its android version?

MT6572 clone M7 screen problem...Please help!

Hello to all. I would like to ask you advice/ opinion regarding my case. I own a Lenovo clone M7 MT6572 with those features:
Hardware : MT6572
Model : M7
Build number : A10E_AX_CHT_S7_MTH_V02_10042015
Build date UTC : 20150410-100306
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V36.P3, 2015/01/08 16:13
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Apr 10 18:01:07 CST 2015
It's rooted, but it still retains it's original ROM.
Suddenly ,out of the blue, the upper part of the screen (the area around the clock) started to blink or to flick, like in a PC monitor when you set the frequency to high.
The worst part was ,after a while , the 9/10 part of the screen went black (black out) except the small upper flickering part,which was still responsive to touch.If i close it for a couple minutes it is restored but for a short period of time.
I tried a lot like reseting and restoring the factory settings, formating the system and cache,but nothing seems to be the solution.
It's any way to boot it in safe mode? Do you believe is a software or a hardware problem? Any suggestion will be welcome

Please type *#2663# and phone touch key fw is what???

Hi;
My phone soft key not working. I think it is a software issue.
please type *#2663# and say about phone touch key fw number.
my phone is SM-J700H/DS ;
phone's tsp fw version : ME005205
part's tsp fw version : ME005205
tsp threshold : 55
config tsp fw version : J7_ME_2132
tsp checksum data : 64
phone's touch key fw version : 0x02
parts's touch key fw version : 0x02

Here (Mine is J700m)

[email protected] said:
Hi;
My phone soft key not working. I think it is a software issue.
please type *#2663# and say about phone touch key fw number.
my phone is SM-J700H/DS ;
phone's tsp fw version : ME005205
part's tsp fw version : ME005205
tsp threshold : 55
config tsp fw version : J7_ME_2132
tsp checksum data : 64
phone's touch key fw version : 0x02
parts's touch key fw version : 0x02
Click to expand...
Click to collapse
Last time I did tsp firmware update on my pocket plus I ended up changing the entire touch
Sent from my SM-J700H using XDA-Developers mobile app