Hello Everybody
i have account in 4pda but i cant pass the captcha for login process
so i cant download latest ultimate kernel for Galaxy Note 4
but @arbi97 came with solution :
solution from @arbi97 :
-----------------------------------------------------------------------------
Download it on my MEGA link: REMOVED
P.S I always update this link. Last versions always be here. Good luck-----------------------------------------------------------------------------
Creators:
me and @arbi97 are not creators of this kernel we're just trying to help others to access and use it
you can found creators of this amazing kernel and original thread in : REMOVED
p.s thanks @masaichris too for his help
Attention:
Flash delete_synapse_CWM.zip first if you have previous Ultimate kernel versions for minimizing problems
This kernel is for Samsung GALAXY Note 4 (N910C/N910H) with Lollipop only
Optimal Settings For Best Power consumption / Performance
-75mV all A57 and A53 Frequencies (From CPU VOLT tab in synapse)
-75mV all Gpu frequencies (From GPU tab in synapse)
Interactive governer for A57 cores & Gpu (from GOV tab in synapse)
Lionhearth governer for A53 cores (from GOV tab in synapse)
set MIN frequency of Both A53 & A57 clusters to 200 MHZ (From CPU FREQ tab in synapse)
set MIN frequency of GPU7 clusters to 100 MHZ (From GPU tab in synapse)
Because of lot's of wakelocks of samsung apps , it's highly recomended to use Greenify with ultimate kernel
you can set maximum number of online cores to 7 or 6 for extended battey life (Not Recommended)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note : If you experienced random Restarts after applying these settings you should test more safe settings
for example -50mV all cores and Gpu and set MIN frequency to 400 MHz
Change List :
Ultimate_Kernel_v. 38
-Linux 3.10.82
-Added disabling CPU cores (author of halaszk)
-Patches and/sensorhub drivers/media/platform/exynos, affect the operation of camera, missions should not be (for firmwares based on VOE3)
-Removed the Forced Fast charge control and replaced by a much more advanced SEC Charge Control (author Andreilux)
-Reconfigured delays and GPU load thresholds to improve responsiveness and reduce mikrolagov
-Patched and reconfigured governor Interactive, now he again default
-Added governory Ondemand and Conservative
-Optimized Wi-Fi and reduced his wakelocks
Full Change List (i'm working on translation) :
-patched to Linux 3.10.76
-have been collected for new Linaro 4.9.3 GCC SaberMod 6.0
-optimization of the Graphite and neon-vfpv4
-peresobrano on the updated samsungovskih source VOS5
-updated ramdisk
-Wolfson Sound Control by AndreiLux-management via Synapse
-Async Fsync()
A57-CPU cluster-200-2200MGc (loaded on default on stock frequencies 700-1900 MHz)
-CPU A53 cluster-200-1500MGc (loaded on default on stock frequencies 400-1300 MHz)
-GPU Freq Control
-Significantly increased frequency throttling GPU for improved performance
-patches from Nvidia to improve energy efficiency
-tweaks to improve the performance of the file system
-updated many device drivers
-touchscreen driver
-new internal Kernel tweaks and optimization
-changed samsungovskij input_boost driver for a better fluidity/interface responsiveness
-optimization flags changed for better performance
-ondemand governor replaced with an improved version that is compatible with the architecture of the big. Little
-added Scheduler BFQ-v7r6 and is installed by default
-all schedulers reconfigured for system optimization
-added test for schedulers SIO, SIOPLUS, FIOPS, FIFO, VR, ZEN, TRIPNDROID (part of them is not working properly, dopilû them in the future)
-activated all TCP control algorithms-bic, westwood, reno, cubic, highspeed, hybla, htcp, vegas, veno, scalable, lp, Yes, illinois
-added governory dancedance, Lionheart, smartmax, ondemandplus, smartassV2, wheatley, adaptive, nightmare, darkness, alucard, conservativex, intelliactive and other
-THERMAL Control
-KSM
-added USB Mass Storage mode (only for external USB drive)
-added mode USB keyboard/mouse (you can use your phone as a full-fledged keyboard/mouse for notebooks/computers). Need activation mode in the Synapse and use additional progs https://play.google.co...te.hid.keyboard.client after activation normal mode MTP will shut down, including don't forget to disable it when naigraetes′.
-ported cpu_touch_boost and added the appropriate settings in the Synapse
-completely off Samsung Rooting Restriction Feature
-PowerEfficient Workqueues configuring in the Synapse (ulučšenâ)
-Gentle Fair Sleepers interface at the Synapse
-manage ARCH POWER in Synapse
-Force Fast Charge by ktoonsez, at the Synapse configuration
-DriveDroid patch
-Sweep2Sleep (default is off-enables/disables the Synapse)-shutdown screen svajpami from left to right and from right to left along the bottom edge of the screen
-PowerSuspend v. 1.5
-XZ (tweaked) kernel compression
- KERNEL_MODE_NEON
- multiple patches kernel/sched
- cifs: enable mounting cifs drives visible to all apps
- ntfs support is activated
- net: tcp: optimization
- sched: disable GENTLE_FAIR_SLEEPERS by default - to improve UI responsiveness
- disable add_random for more performance on SSD's
- Dynamic read-ahead
- FS Sync On/Off control
- Dynamic Fsync
- ramdisk reconfigured
- Init.d support
- Synapse embedded in the installer
- Frandom (Enabled by default)
- Full SE Linux Permissive SE Linux full Disable
- Disable KNOX
- System partition RW (read/write)
- Secure Storage Disable
- Write protection off for external flash drive
- Screen Mirroring Fix
Good Luck[/B]
Ultimate Kernel v37.2
mrgspeed said:
Hi every one
i have account in 4pda but i cant pass the captcha for login proccess
so i cant download ultimate kernel 37.2 for Note 4
is there any one who can help me on this ?
all helps are appriciated
sorry for bad english
Click to expand...
Click to collapse
REMOVED
Enjoy yourself.
Ban not too far
My english bad too
@masaichris
THANK YOU MAN !!!!!!!!!!!
mrgspeed said:
Hi every one
i have account in 4pda but i cant pass the captcha for login proccess
so i cant download ultimate kernel 37.2 for Note 4
is there any one who can help me on this ?
all helps are appriciated
sorry for bad english
Click to expand...
Click to collapse
Man, the author has updated it to 38 with more and more good features! Check it on my MEGA link: REMOVED
P.S I always update this link. Last versions always be here. Good luck
Which kernel is better
Googy 1.3 or ultimate v38? Why?
murtadha50 said:
Which kernel is better
Googy 1.3 or ultimate v38? Why?
Click to expand...
Click to collapse
Both are good as it depends on users need but ultimate v38 is banned On XDA because of GPL conflict But you may use it on your own risk as the Developer for Ultimate do not agree on sharing his source
BTW : Googy 1.3 is more stable in my personal opinion and uses Less complicated or usless tweaks :good:
djmax81 said:
Both are good as it depends on users need but ultimate v38 is banned On XDA because of GPL conflict But you may use it on your own risk as the Developer for Ultimate do not agree on sharing his source
BTW : Googy 1.3 is more stable in my personal opinion and uses Less complicated or usless tweaks :good:
Click to expand...
Click to collapse
Thanks for the explaination
Can I flash googy over ultimate kernel without problems?
Thank you !!
@arbi97
tnx dude
i will inform other note 4 users
we're counting on you
Great. ...... Counting on how much time moderators will take to ban this thread. ?????
And for 4.4.4?
the development progress of this kernel is great cant ask for more on this kernel having an update evry week, i am one of your ultimate user of this kernel for now, by the way i want to save more on battery i am not that gaming type person, most i do is just browsing using FB app, taking pics, texting. . may i ask if anybody here has synapse settings for battery saving? i tried other kernel in terms of straight mobile data (H+) and stock kernel form 100% down to 10% it just only took 4hrs screen time. hope someone will share thanks
Thanks for this post @mrgspeed and @arbi97 for the MEGA link.
@Near_07
Near_07 said:
the development progress of this kernel is great cant ask for more on this kernel having an update evry week, i am one of your ultimate user of this kernel for now, by the way i want to save more on battery i am not that gaming type person, most i do is just browsing using FB app, taking pics, texting. . may i ask if anybody here has synapse settings for battery saving? i tried other kernel in terms of straight mobile data (H+) and stock kernel form 100% down to 10% it just only took 4hrs screen time. hope someone will share thanks
Click to expand...
Click to collapse
under volt All A53 + A57 cores and GPU (-75mV each should be good for start )
Use greenify as a companion app for hibernating useless apps, you'll see results
https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
@avercros
And for 4.4.4?
Click to expand...
Click to collapse
Sorry, original creator just stopped development of Kit Kat version
Good Luck
mrgspeed said:
@Near_07
under volt All A53 + A57 cores and GPU (-75mV each should be good for start )
Use greenify as a companion app for hibernating useless apps, you'll see results
https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
@avercros
Sorry, original creator just stopped development of Kit Kat version
Good Luck
Click to expand...
Click to collapse
i see -75 is -12 grades . . how about a53 core governor and a57 core governor and what wud be my scheduler thanks
---------- Post added at 11:50 AM ---------- Previous post was at 11:10 AM ----------
mrgspeed said:
@Near_07
under volt All A53 + A57 cores and GPU (-75mV each should be good for start )
Use greenify as a companion app for hibernating useless apps, you'll see results
https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
Click to expand...
Click to collapse
How about this. . Some of the cores stopped.. i believe this will save more of battery juice now
Sent from Glamour S6 ROM
---------- Post added at 12:21 PM ---------- Previous post was at 11:50 AM ----------
murtadha50 said:
Which kernel is better
Googy 1.3 or ultimate v38? Why?
Click to expand...
Click to collapse
since u ask i made battery test between the two kernels (later versions) and i got this. straight data connection from 100 down to 7%. i choose ktoonservative and conservativex as a governor in ultimate which is i didnt find in googymax. . maybe the governors handle the batterylife.
@Near_07
i just updated first post
check it, you'll find information you need
mrgspeed said:
@Near_07
under volt All A53 + A57 cores and GPU (-75mV each should be good for start )
Use greenify as a companion app for hibernating useless apps, you'll see results
https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
@avercros
Sorry, original creator just stopped development of Kit Kat version
Good Luck
Click to expand...
Click to collapse
Thanks for you answer, i'll wait until 5.1.1 to taste this kernel.
Near_07 said:
i see -75 is -12 grades . . how about a53 core governor and a57 core governor and what wud be my scheduler thanks
---------- Post added at 11:50 AM ---------- Previous post was at 11:10 AM ----------
How about this. . Some of the cores stopped.. i believe this will save more of battery juice now
Sent from Glamour S6 ROM
---------- Post added at 12:21 PM ---------- Previous post was at 11:50 AM ----------
since u ask i made battery test between the two kernels (later versions) and i got this. straight data connection from 100 down to 7%. i choose ktoonservative and conservativex as a governor in ultimate which is i didnt find in googymax. . maybe the governors handle the batterylife.
Click to expand...
Click to collapse
In my test ktoonservative governor is not battery friendly altough some cores sometimes stop. But it has very good performance. (Geekbench test = 4500)
I think cores restart consumes much battery than steady works
Regards
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi
aydink_1903 said:
In my test ktoonservative governor is not battery friendly altough some cores sometimes stop. But it has very good performance. (Geekbench test = 4500)
I think cores restart consumes much battery than steady works
Regards
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
I was able to hit 1400/4990 in Geekbench with ktoonservative and some tweaks to it. It's fast but eats battery like crazy. Oh, the phone gets hotter as well.
@aydink_1903 @Tauras
Check out first post and try recommended settings (Optimal Settings For Best Power consumption / Performance section)
after doing lot's of tests , i found those settings best
I hope they work for you as well
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nebula kernel is for AOSP based KitKat android 4.4+ ROMs
and AOSP based Lollipop android 5.0+ ROMs
Supports both GT-i9105 and GT-i9105P
Original nebula kernel thread for i9082 is HERE
I do not own Samsung Galaxy S2 Plus
Download the latest PERFORMANCE CONTROL APP to utilize the full potential of the kernel.
Brief explanation of few of the features in nebula can be found in the third post. For more info, use Google.
FEATURES
Compiled using Linaro 4.9.1 2014-05 toolchain
Based on kernel version 3.0.101
Additional Governors: SmartassV2, SmartassH3, Lulzactive, LulzactiveQ
Additonal I/O Schedulers: ROW, SIO, SIOPLUS, VR, ZEN, BFQ
Overclock: 1.3 Ghz, 1.4 Ghz, 1.5 Ghz, 1.6 Ghz
F2FS support
CPU Boost driver
UKSM (Ultra KSM) support (enable it in Performance Control app)
Frandom
Dynamic Sync Control (enable it in Performance Control app)
Asynchronous FSync ported from HTC One
Cross Memory Attach
Entropy tweaks
Increased read-ahead from 16/128 to 32/2048 (can be customized in Performance Control app)
Disabled Cyclic Redundancy Checks (CRC) for better performance
Many patches, fixes and improvements from codeaurora
Many more performance and battery friendly tweaks
INSTALLATION
Download the latest nebula zip
Flash using CWM recovery
Wipe cache
Wipe dalvik cache
Reboot
DOWNLOADS
nebula kernel
(Please don't make mirror links of the kernel)
SOURCE
Source code of the kernel can be found at my Gihub.
CREDITS
- pawitp - nebula is based on his kernel source for CM11
- to all the developers whose mods I have included in my kernel
- @k2wl - for his extensive guide on kernel compilation. Big thanx to him.
- @CoolDevelopment - for maintaining the kernel source at SamsungBCM-Cyanogenmod repo and testing the 1st build
- @beastaki23 - for vibration fixes
- @SH1M4BD3 - for testing the 1st build
CHANGELOG
Changelog is available on nebula kernel wiki too
v3.20
- Fixes to network related kernel code
---x---x---x---
v3.18
- Stability fixes (check source code commits for details)
---x---x---x---
v3.16
- Backport timed General-Purpose Input/Ouput from hammerhead (Nexus 5)
- Improve multi-touch event handling
- Improve compiled kernel code
- Other fixes and improvements
---x---x---x---
v3.14
- Fix CVE-2014-3153
---x---x---x---
v3.13
- Add support for s2ve (GT-i9105)
(This and all future versions will work on both, GT-i9105 and GT-i9105P)
---x---x---x---
v3.12
- Compiled using the latest Linaro 4.9.1 - 2014.05 toolchain
- New I/O scheduler - BFQ (latest version - v7r4 - released on 18th May 2014)
- Memory Management: pass readahead info down to the I/O scheduler
- lib/memcopy: use glibc version
---x---x---x---
v3.10
- Compiled using the latest Linaro 4.9.1 - 2014.04 toolchain
- Memory management - lazy cache flushing on non-mapped pages
- Many updates to Device Mapper
- Use proper memory barriers for bitops
- softirq: reduce latencies
- sync: don't block the flusher thread waiting on IO
- ext4: Speed up FITRIM by recording flags in ext4_group_info
- ext4: speed up truncate/unlink by not using bforget() unless needed
- vmscan: add customisable shrinker batch size
- Other fixes and performance tweaks
---x---x---x---
v3.04
- CPU boost driver - set tunables
- New governor - LulzactiveQ
- New I/O scheduler - SIOPLUS
- Wait just 1 second, instead of 4 seconds for other CPU core to halt
- Other fixes and performance tweaks
---x---x---x---
v3.00
- Initial release
---x---x---x---
BRIEF EXPLANATION ABOUT KERNEL FEATURES
UKSM
UKSM is about de-duplication of data in system memory rather than being another de-duplicating file-system. This improves RAM usage.
Dynamic Sync Control
The dynamic sync control interface uses Android kernel's unique early suspend / late resume interface. While screen is on, file sync is disabled. When screen is off, a file sync is called to flush all outstanding writes and restore file sync operation as normal.
Frandom
Frandom is a Linux kernel random number generator, which is 10-50 times faster than what you get from Linux' built-in /dev/urandom. It uses very little (/dev/frandom) or none (/dev/erandom) of the kernel's entropy pool, so it is very useful for applications that require a handy source for lots of random data.
CPU Boost driver
When certain bursty and important events take place, it might take a while for the current cpufreq governor to notice the new load and react to it. That would result in poor user experience. To alleviate this, the cpu-boost driver boosts the frequency of a CPU for a short duration to maintain good user experience while the governor catches up.
FAQ
On which ROM can I install nebula?
- nebula can be used on any AOSP kitkat 4.4+ based ROM. (Carbon, SlimKat, CM11)
What is the best and most stable configuration for nebula?
- Configuration depends from user to user. Still, the most stable configuration according to me and that I use is below. It might differ for you.
- Governor: SmartassV2
- Max. freq: 1.2 Ghz (OCing doesn't really have an increased and noticeable performance, rather it heats the processor and wastes battery for a marginal gain in performance as well as creates instability - random reboots etc. Google more about OC.) (Read the description on this commit.)
- I/O Scheduler - SIO
- Enable UKSM (from Performance Control app)
- Enable Dynamic FSync (from Performance Control app)
- I'll update this configuration as more tweaks are added to nebula
I get random reboots, what should I do?
- I am working on the kernel for myself and the kernel is quite stable for me. Still, if you face reboots see below:
- Make sure you followed the installation instruction written in Post #1.
- Make sure you "Fix permissions".
- OCing will always cause instability. Try reducing the max frequency to 1.2 Ghz
- It is quite possible that you don't know how to use a custom kernel. Not everything needs to be set at HIGHEST. Just because an "option" is there doesn't mean you have to select it. Try changing the configuration that meets your needs and satisfies you. If you set up the kernel properly, it would stop giving you random reboots.
- The only way to get things fixed is to provide logs. I cannot fix that I cannot see. Google, how to take logs to find and solve kernel issues. (kmsg/last_kmsg)
- Tell me a way in which I can reproduce the issue on my phone.
Thank you very much
Sent from my SM-T210 using XDA Free mobile app
Works great, thanks :3
Gonna try with ur remix rom
No problems yet and looks good. Thanks
I wanna ask about cpu boost option, where i can enbale it?
rs tony said:
Gonna try with ur remix rom
No problems yet and looks good. Thanks
I wanna ask about cpu boost option, where i can enbale it?
Click to expand...
Click to collapse
It is already enabled.
It is always nice to see something new to our device. Great work!
YezZz finally nebula kernel for S2+
Is for gt-i9105
Inviato dal mio GT-I9105 utilizzando Tapatalk
deleted*
how i can enable Ultra-Kernel Samepage Merging(UKSM) ?? i can't find in performance control app
anastasiszn said:
how i can enable Ultra-Kernel Samepage Merging(UKSM) ?? i can't find in performance control app
Click to expand...
Click to collapse
Sent from my GT-I9082 using Tapatalk
Hi,
thanks for a new kernel!
Does anyone know whether calls via bluetooth (not the same as music via bt) work?
DeKiesel said:
Hi,
thanks for a new kernel!
Does anyone know whether calls via bluetooth (not the same as music via bt) work?
Click to expand...
Click to collapse
It would be nice if someone tests it, because it's compiled with grands sources
Sent from my GT-I9105P using XDA Premium 4 mobile app
CoolDevelopment said:
It would be nice if someone tests it, because it's compiled with grands sources
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I wont be at home before 21h tonight. In case no one beats me to it I will try it then.
nebula kernel
Gov : ondemand
i/o : sio
cpu : 1600
antutu score : 11880
moshkernel
Gov : ondemand
i/o : sio
cpu : 1300
antutu score : 12180
1st release broh, just hold a sec till next version release, he work on it
Sent from my GT-I9105P
anastasiszn said:
nebula kernel
Gov : ondemand
i/o : sio
cpu : 1600
antutu score : 11880
moshkernel
Gov : ondemand
i/o : sio
cpu : 1300
antutu score : 12180
Click to expand...
Click to collapse
Higher cpu level doesn't always give u better scores in benchmark
rs tony said:
Higher cpu level doesn't always give u better scores in benchmark
Click to expand...
Click to collapse
ok tell me your best score with this kernel or show me
First Custom Kernel for Micromax Canvas Magnus A117
WARNING:
Code:
I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
FEATURES :
As of now basic features added. Will keep updating new version regularly.
Lots of governors & I/O schedulers added ( Check below for list )
LZMA Compression for zImage and Gzip for ramdisk.
Google Snappy compression mode (v5)
Clean Cache Enabled
MTK Vermagic Hack
Optimized ARM algorithm ( Credits to @faux123 )
NTFS support.
Governors added :
Lulzactiveq
Nightmare
Smartass2
Nightmare
Pegasusq
Sakuractive
Intellidemand
zzmoove
Performance
Powersave
I/O schedulers added :
SIO
Fifo
Fiops
Row
Vr
Zen
Sioplus
Click to expand...
Click to collapse
Use Trickster mod App to change governors. For more detailed review on governors read post #3
Installation instructions :
Copy zip to your Sd card / Internal memory & reboot to recovery
Mount system ( mounts & storage -> Mount system )
Install zip
Reboot :laugh:
DOWNLOADS :
Xtreme Sandy kernel V 1.2
Note
Anyone who wants to include the Kernel in custom ROM's feel free to include after informing me. Also just link back to this thread
Older versions
V 1.0 : http://p.pw/babqRW ( Only compatible with Blu ROM
CREDITS :
@kashifmin for his support and guidance
@Siddhesh.K15 for working with me for months
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel sources :
https://github.com/sandymanu/A117_MT6589_kernel
XDA:DevDB Information
[KERNEL][3.4.5][Xtreme Sandy Kernel ][Smoothness] for Micromax A117, Kernel for the Micromax Canvas Magnus A117
Contributors
Santhosh M
Kernel Special Features:
Version Information
Status: Alpha
Current Stable Version: V 1.2
Stable Release Date: 2014-07-17
Created 2014-07-03
Last Updated 2014-07-23
FAQ's on Kernel :
What is a kernel? Why should I install it?
A: Click here to know the answer.
Will this work on all MT6589 / 6589T Phones?
A: NO
Is this kernel compatible with all ROMs?
A: This kernel works only on Stock ROM as of now. Other ROM's have to replace ramdisk.
Will this work on other clones of these devices such as Blu life One M ?
A: YES. It will work
Is this kernel recommended for daily use?
A: Yes!
What are the best governor+io combinations?
A: Hotplug+cfq, Smartassv2+cfq, Sakuractive+cfq. Read about governors & i/o schedulers & try them and give feedback on the thread so that others can know.
Explanation on Governors & I/O schedulers :
Read the below links for everything
http://forum.xda-developers.com/showthread.php?t=1767797 ( All governors & schedulers explained )
http://forum.xda-developers.com/showthread.php?t=2301294 ( All governors & schedulers explained )
For people who are lazy i have put through some here
Performance governor helps gaming according to people who tried my kernel in A250. I can't confirm the same here since i am not a gamer. So try that for gaming and let people know.
Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors)
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
Sakuractive:
This driver mimics the frequency scaling behavior in "on demand" but with several key differences. First is that frequency transitions use the CPUFreq table directly, instead of incrementing in a percentage of the maximum available frequency. Second "sakuractive" will offline auxillary CPUs when the system is idle, and online those CPUs once the system becomes busy again. This last feature is needed for architectures which transition to low power states when only the "master" CPU is online, or for thermally constrained devices
ZZmoove
ZZmove Governor optimized for low power consumption with the screen off, with particular attention to the limitation of consumption applications in the background with the screen off, such as listening to music. It has three settings: battery saver, balanced and performance. In addition to a performance boost, there is also the governor zzmove optimized.
Pegasusq/Pegasusd
The Pegasus-q / d is a multi-core based on the Ondemand governor and governor with integrated hot-plugging.
Ongoing processes in the queue, we know that multiple processes can run simultaneously on. These processes are active in an array, which is a field called "Run Queue" queue that is ongoing, with their priority values arranged (priority will be used by the task scheduler, which then decides which process to run next).
To ensure that each process has its fair share of resources, each running for a certain period and will eventually stop and then again placed in the queue until it is your turn again. If a program is terminated, so that others can run the program with the highest priority in the current queue is executed.
SmartassV2:
Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.
I/O Schedulers :
I/O Schedulers Explained
1: Noop:
Inserts all the incoming I/O requests to a First In First Out queue and implements request merging. Best used with storage devices that does not depend on mechanical movement to access data (yes, like our flash drives). Advantage here is that flash drives does not require reordering of multiple I/O requests unlike in normal hard drives.
Advantages:
Serves I/O requests with least number of cpu cycles. (Battery friendly?)
Best for flash drives since there is no seeking penalty.
Good throughput on db systems.
Disadvantages:
Reduction in number of cpu cycles used is proportional to drop in performance.
2: Deadline:
Goal is to minimize I/O latency or starvation of a request. The same is achieved by round robin policy to be fair among multiple I/O requests. Five queues are aggressively used to reorder incoming requests.
Advantages:
Nearly a real time scheduler.
Excels in reducing latency of any given single I/O.
Best scheduler for database access and queries.
Bandwidth requirement of a process - what percentage of CPU it needs, is easily calculated.
Like noop, a good scheduler for solid state/flash drives.
Disadvantages:
When system is overloaded, set of processes that may miss deadline is largely unpredictable.
3: CFQ:
Completely Fair Queuing scheduler maintains a scalable per-process I/O queue and attempts to distribute the available I/O bandwidth equally among all I/O requests. Each per-process queue contains synchronous requests from processes. Time slice allocated for each queue depends on the priority of the 'parent' process. V2 of CFQ has some fixes which solves process' i/o starvation and some small backward seeks in the hope of improving responsiveness.
Advantages:
Considered to deliver a balanced i/o performance.
Easiest to tune.
Excels on multiprocessor systems.
Best database system performance after deadline.
Disadvantages:
Some users report media scanning takes longest to complete using CFQ. This could be because of the property that since the bandwidth is equally distributed to all i/o operations during boot-up, media scanning is not given any special priority.
Jitter (worst-case-delay) exhibited can sometimes be high, because of the number of tasks competing for the disk.
5: SIO:
Simple I/O scheduler aims to keep minimum overhead to achieve low latency to serve I/O requests. No priority quesues concepts, but only basic merging. Sio is a mix between noop & deadline. No reordering or sorting of requests.
Advantages:
Simple, so reliable.
Minimized starvation of requests.
Disadvantages:
Slow random-read speeds on flash drives, compared to other schedulers.
Sequential-read speeds on flash drives also not so good.
6: V(R):
Unlike other schedulers, synchronous and asynchronous requests are not treated separately, instead a deadline is imposed for fairness. The next request to be served is based on it's distance from last request.
Advantages:
May be best for benchmarking because at the peak of it's 'form' VR performs best.
Disadvantages:
Performance fluctuation results in below-average performance at times.
Least reliable/most unstable.
I congratulate you on your amazing work. Looking forward to more from you.
Grounded for long; its time now to fly...
Click to expand...
Click to collapse
keep on crossing your limits.. Keep flying my friend .....
Rht555 said:
keep on crossing your limits.. Keep flying my friend .....
Click to expand...
Click to collapse
Thanks a lot bro
Excellent work !!
Android Original development was the only place there was not activity in magnus dashboard, you have unleashed it with the bang. ! Hope it can be used on magnus stock rom in coming days. !! Cheers :cyclops::highfive:
Finally *wipes tears* an awesome work by an awesome dev ! thnkz for all the support.... :good::good::good: keep developing gr8 :highfive:
waiting for more
Was waiting for this thanks a lot
Sent from my Micromax A117 using XDA Premium 4 mobile app
rubenhardy said:
Android Original development was the only place there was not activity in magnus dashboard, you have unleashed it with the bang. ! Hope it can be used on magnus stock rom in coming days. !! Cheers :cyclops::highfive:
Click to expand...
Click to collapse
Hey Did You Checked In Stock ROM And XLD,SLD,PureXpriaZ2 Rom ???
Please make it available for stock rom
Xtreme Sandy kernel V 1.2 released
Now compatible with A117 stock ROM
Changelogs
Compatible with A117 stock ROM
Lulzactiveq and nighmare governors added ( Lulzactive gives great performance. Can be used for gaming )
Xtreme smoothness
DOWNLOADS :
Xtreme Sandy kernel V 1.2
Post feedback &give your suggestions in the thread if you are trying kernel so that others can benefit from it.
Thanks
Santhosh
Can this be used in other custom roms or only for stock?
Sent from my A117 using XDA Free mobile app
Link is not working plz fix
Sent from my Micromax A117 using XDA Premium 4 mobile app
Siddk007 said:
Can this be used in other custom roms or only for stock?
Sent from my A117 using XDA Free mobile app
Click to expand...
Click to collapse
Hope you have read Post #2
vikash118 said:
Link is not working plz fix
Sent from my Micromax A117 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It does work. Checked even now
Santhosh M said:
It does work. Checked even now
Click to expand...
Click to collapse
Link not working! Has been blocked by my ISP (Airtel)
Please give the direct link!
Cant download
Santhosh M said:
Xtreme Sandy kernel V 1.2 released
Now compatible with A117 stock ROM
Changelogs
Compatible with A117 stock ROM
Lulzactiveq and nighmare governors added ( Lulzactive gives great performance. Can be used for gaming )
Xtreme smoothness
DOWNLOADS :
Xtreme Sandy kernel V 1.2
Post feedback &give your suggestions in the thread if you are trying kernel so that others can benefit from it.
Thanks
Santhosh
Click to expand...
Click to collapse
Cant download..............
Santhosh M said:
Xtreme Sandy kernel V 1.2 released
Now compatible with A117 stock ROM
Changelogs
Compatible with A117 stock ROM
Lulzactiveq and nighmare governors added ( Lulzactive gives great performance. Can be used for gaming )
Xtreme smoothness
DOWNLOADS :
Xtreme Sandy kernel V 1.2
Post feedback &give your suggestions in the thread if you are trying kernel so that others can benefit from it.
Thanks
Santhosh
Click to expand...
Click to collapse
I'm glad you got it working on the STOCK ROM. But I do have a request? Can you please add features like Sweep2Wake and all? I know it eats battery, but options can be available. Just a request. Thanks. I appreciate your work, the kernel is really smooth.Can we?
Full Regards.
Geek-DROID said:
I'm glad you got it working on the STOCK ROM. But I do have a request? Can you please add features like Sweep2Wake and all? I know it eats battery, but options can be available. Just a request. Thanks. I appreciate your work, the kernel is really smooth.Can we?
Full Regards.
Click to expand...
Click to collapse
Thanks for the review. Ya s2w is possible. Need to edit touch panel driver codes and it comes to lot of lines. Personally no interest to work on it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
for Note 4 & Note Edge & Note 4 S-LTE
Requirements for using the kernel
Model Variants: SM-N910S/K/L, SM-N915S/K/L, SM-N916S/K/L
Tested Device: SM-N910S/K/L & SM-N915S/K/L & SM-N916S/K/L
Installed OS: TouchWiz M 6.0.1, M Base Note7 and All Porting ROMs
Main Features
• All porting ROM support.
• Fixed a screen-touch issue that occurred while waking from sleep mode.
-- Problems exist in stock(samsung) firmware.
• Synapse support.
• SELinux Permissive.
• Linux 3.10 upstream.
• Compile with UBERTC 7.2.1 toolchain.
• F2FS fully support.
• Gametuner-Mod: Game Booster Mode, Provides intelligent performance enhancement mode in conjunction with Samsung-Gametuner.
• Apply Fake KNOX.
• Apply chacha20 to random (entropy).
• Linaro LSK-v3.18-Energy-Aware Scheduler (EAS) Backport.
- EAS simplifies power and performance management through scheduler-driven tuning to manage more efficiently.
• Improved storage performance and longevity by applying lazytime mount options.
- Similar to Dynamic Fsync, but operates at the file system level and has no risk of data loss.
• CPU/GPU UC & OC.
• CPU/GPU/BUS voltage regulation.
• R12P0 GPU Driver(Stock is R7P0) & Performance Tuning.
• NVIDIA cpu relax patch, reduced heat & increased battery life.
• HMP tuning Interface.
• Enable NEON in kernel mode.
• Detail charging circuit control allows faster charging.
• Added I/O Scheduler 'bfq, fifo, fiops, row, sio, zen'.
• Enable Westwood tcp/ip congestion control.
• LED FADE control.
• Qualcomm interactive (renamed cafactive) cpu governor porting @by arter97.
• Added battery-friendly impulse governor and more powerful ironactive (interactive in the Qualcomm 4.4 kernel) governor.
• Provides an add-on that keep kernel settings on un-rooted devices.
• Synapse: System Tweak add-on available.
• Synapse: Provides configuration profile separated by performance / battery / stability.
• Many other optimization applications.
Credit (Thanks. to)
• AndreiLux - Perseus5433 kernel.
• UpInTheAir - SkyHigh Kernel.
• halaszk - Perseus-halaszk-universal5433 kernel.
• arter97, gokhanmoral, faux123, yank555.lu
• RaymanFX (AOSP Kernel & Vendor).
• [email protected] Cafe, 시아씨@Develoid Cafe.
• All members of the G+ PRIME-BETA User's Community.
• And all of commited in sources & all of xda developers.
Change Log
Detail(Korean): http://enfree.com/prime/?page=changelog&device=N910
Download
Source Code
https://github.com/dwander/Linaro-base/tree/trelte_mm
reserved
Oh! Great! Big thanks!!!!!!!
I may have missed it but couldn't see if it supports extended batteries. Can you clarify? Also thank you for sharing.
Sorry for reporting this but kernel is not booting in My N910C.Its stuck at samsung logo screen.
EvilKing009 said:
Sorry for reporting this but kernel is not booting in My N910C.Its stuck at samsung logo screen.
Click to expand...
Click to collapse
Good thing I read this part:
Tested Device: SM-N910S/K/L & SM-N915S/K/L & SM-N916S/K/L
Thanks for the feedback. :good:
EvilKing009 said:
Sorry for reporting this but kernel is not booting in My N910C.Its stuck at samsung logo screen.
Click to expand...
Click to collapse
did you wiped cache/dalvik after installed?
mine is stucked too, reverting to suemax xD - ROM Nemesis Refined.
i would utilize that kernel, the improvements got me
EvilKing009 said:
Sorry for reporting this but kernel is not booting in My N910C.Its stuck at samsung logo screen.
Click to expand...
Click to collapse
It's not working for my N910H... I'm on AirROM 2.1 Final
The n910c did not work on my phone. air v 2.1 final is installed.
it is not working on n910c with air rom, it stuck on boot logo
kozgel said:
it is not working on n910c with air rom, it stuck on boot logo
Click to expand...
Click to collapse
The kernel for Korean Note 4 ( 910 916 S/L/K). Pls read the title
Minhkyo said:
The kernel for Korean Note 4 ( 910 916 S/L/K). Pls read the title
Click to expand...
Click to collapse
in title n910c is in the supported model list only not tested on it, you must read title again:
Requirements for using the kernel
Model Variants: SM-N910S/K/L/C/H/U, SM-N915S/K/L, SM-N916S/K/L
Tested Device: SM-N910S/K/L & SM-N915S/K/L & SM-N916S/K/L
Installed OS: TouchWiz M 6.0.1, M Base Note7 and All Porting ROMs
Would be better to rename the Thread title to the actual supported variants, most people dont read the entire thread and look at "tested on"
if we look at bootimg.tar.xz using winrar, there is two separate kernels for n910ch(n910c and n910h) and n910kor (assuming korean version?)
so im pretty sure n910c is supposed to be supported, its just @Hyunwoo AHN doesnt have the device to test it on
i was waiting for this kernel thank u @dwander i am a fan from tunisia ....
i am using this kernel on my n910s and its awsome so fluid and doing great gob but its seems need some extra feature that is missing
i have some suggestion :
audio driver to improve the audio qualiy and boost it
batterie calibration tool
more battrie friendly govs
i cant see any NVIDIA cpu relax patch sysfs switchs
cortexbrain script for more automated behaviour
led brightness control
DOZE controle
adaptive screen brightness
mdnie controle
Energy-Aware Scheduling
Hotplug Governor control for more cpu cores control........... i guess this will be the best for batterie
i dont know maybe i have suggest somthing wrong
anyway i am in love with ur work sir @dwander and i wich i can donate
thank u
waelchateur said:
i was waiting for this kernel thank u @dwander i am a fan from tunisia ....
i am using this kernel on my n910s and its awsome so fluid and doing great gob but its seems need some extra feature that is missing
i have some suggestion :
audio driver to improve the audio qualiy and boost it
batterie calibration tool
more battrie friendly govs
i cant see any NVIDIA cpu relax patch sysfs switchs
cortexbrain script for more automated behaviour
led brightness control
DOZE controle
adaptive screen brightness
mdnie controle
Energy-Aware Scheduling
Hotplug Governor control for more cpu cores control........... i guess this will be the best for batterie
i dont know maybe i have suggest somthing wrong
anyway i am in love with ur work sir @dwander and i wich i can donate
thank u
Click to expand...
Click to collapse
audio driver to improve the audio quality and boost it
The audio chip of Note4 does not have a custom driver. To do that, need the help of a professional hardware engineer. If you find it in another kernel it will not work properly or there will be a known error.
batterie calibration tool
The battery information of note 4 is not compensated, so unnecessary function.
more battrie friendly govs
Note4 is based on HMP. There is no custom governor compatible with HMP yet. Present is the best choice. I will not include the wrong governor.
i cant see any NVIDIA cpu relax patch sysfs switchs
Sorry, I deleted it unnecessary.
cortexbrain script for more automated behavior
You may think it looks good, but it is a very unnecessary function. I'm already doing optimization in some other way.
led brightness control
I did not work properly when I tested it. (Not supported by chip)
DOZE controle
Unnecessary function. There are a lot of third party apps that are better and more comfortable to use.
adaptive screen brightness
Samsung Firmware is already supported by default.
mdnie controle
To do that, need the help of a professional hardware engineer.
Energy-Aware Scheduling
What are you talking about? This is the only benefit of this kernel that can not be seen by any other linux-3.10 base kernels.
Hotplug Governor control for more CPU cores control.
- Samsung-Hotplug does not have control method. I've ported the S6 hot-plug driver, but it's been buggy and I gave up because it takes too much time to be perfect.
- The Samsung-hotplug driver in Note 4 operates when the display power is turned off, and stops when the display is turned on.
- If you want custom hotplugs like Thunder-Hotplug, it's a lot slower because it works too slowly on Exynos.
Thanks for your interest in my kernel.
I have maintained this kernel for two years, testing it with a lot of features in it.
If there are no minor functions or are lacking, it is determined by deep anxieties.
HOLY **** THIS KERNEL IS SO FAST !(;ﾟoﾟ)o/￣￣￣￣￣￣￣~ >ﾟ))))彡
So, err, just want to say thank you for this awesome kernel. Coming from the S5 Broadband LTE-A (where the lack of kernel is a real thing and thermal throttling and lag is also stronk), your kernel combined with the Exynos Note 4's excellent hardware is a life saver. Thanks again (◕‿◕✿)
So @Hyunwoo AHN you have no plans to add n910c support? Just change the title?
Look at the 1st page there are a lot of n910c users here. You are the most silence dev I have ever seen wtf
Look at Spacelemon kernel thread the dev release test versions for us other exynos note4 users to test. Then if it boots and/or working he releases it
robert1337 said:
So @Hyunwoo AHN you have no plans to add n910c support? Just change the title?
Look at the 1st page there are a lot of n910c users here. You are the most silence dev I have ever seen wtf
Look at Spacelemon kernel thread the dev release test versions for us other exynos note4 users to test. Then if it boots and/or working he releases it
Click to expand...
Click to collapse
Sorry I do not know English well, I'm getting help from translator.
So feedback is hard.
Support for the N910C is planned.
However, this kernel is a complete kernel with no improvement, and I am focusing on the kernel for S7.
It's not easy to focus on both kernels, and testing for non-booting needs to build many test builds.
And, when the test build comes out, I need a tester that gives feedback right away.
There are no N910C users around me and they are all Koreans(S/K/L users).
If someone has an N910C/U/H user who will provide fast feedback to emails or telegrams, contact us. [email protected]
FINALLY ........ Prime kernel is on XDA, finally. Well done mate.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DarkMoon Kernel for Redmi Note 4 (Mido)based on Zeelogs 4.9 Kernel
Android Rom Support: AOSP / LineageOS based
Android Version Support: 11, 12, 12.1, 13
(there can be some Roms, that dont work with this kernel, due their different device trees)
optimized for battery and performance
- standard I/O Scheduler: Anxiety
- undervolted the heck out of it
2 Versions
one with stock frequencies
one with just RAM overclock (1,3GHz)
compiled with latest GCC and WeebX Clang
!!! ALWAYS MAKE A BACKUP OF YOUR BOOT.IMG, INCASE SOMETHING GOES WRONG !!!
I'm not responsible for any damage on your device.
HOW TO INSTALL:
- boot into your recovery
- make backup of your boot.img
- flash DarkMoon.zip
- wait for it to finish
- wipe cache
- reboot
- enjoy battery life and smoothness
if you have magisk installed, it will be automatically reinstalled, no need to reflash magisk
DOWNLOAD KERNEL
DOWNLOAD RAM OC KERNEL
Download 08/04/23 update
Kernel Zip made with AnyKernel3
--> Kernel Source <--
can i flash for mi max 2,hardly the cpu is the same
unicunic8 said:
can i flash for mi max 2,hardly the cpu is the same
Click to expand...
Click to collapse
No, its for mido only, sorry
KamiKaonashi said:
No, its for mido only, sorry
Click to expand...
Click to collapse
Ok thz u
What is the default ram speed of mido?
T3sla said:
What is the default ram speed of mido?
Click to expand...
Click to collapse
932mhz
KamiKaonashi said:
932mhz
Click to expand...
Click to collapse
Wow, that's a huge improvement, well done!
T3sla said:
Wow, that's a huge improvement, well done!
Click to expand...
Click to collapse
We could go higher, but theres not much improvement after 1.5ghz, so i stick to 1.3. as there is an improvement in UI and no difference in battery consumption
KamiKaonashi said:
We could go higher, but theres not much improvement after 1.5ghz, so i stick to 1.3. as there is an improvement in UI and no difference in battery consumption
Click to expand...
Click to collapse
Can we oc cpu too? I mean beyond 2.2 which some kernels do. It would be a whole different mido if we had 30-35% oc on cpu.
Oh it seems we have sth new to try !
what combo u suggest with this ? i mean i have LOS now .. wanna try CrDroid maybe
how much mV did u undervolted CPU ? (ive seen some kernel with -50 mV stable)
can we have CPU OC version too ?
T3sla said:
Can we oc cpu too? I mean beyond 2.2 which some kernels do. It would be a whole different mido if we had 30-35% oc on cpu.
Click to expand...
Click to collapse
i have another kernel with cpu overclock to 2,2ghz, gpu 1ghz and ram 1,3ghz. this kernel has 60hz or 66hz screen refresh rate, which i will release soon here.
on cpu side, we MAYBE can hit 2,4ghz, but thats the limit.
BigDaddyUnique said:
Oh it seems we have sth new to try !
what combo u suggest with this ? i mean i have LOS now .. wanna try CrDroid maybe
how much mV did u undervolted CPU ? (ive seen some kernel with -50 mV stable)
can we have CPU OC version too ?
Click to expand...
Click to collapse
this release here has an undervolt of around -30mV, but in my tg group i have one with around -55mV stable, i try to get lower, but dont have much time to test right now.
for the gpu overclock, i will soon release a overclocked version of my kernel, (2,2ghz cpu, 1ghz gpu, 1,3ghz ram and either 60hz or 66hz screen refresh rate)
KamiKaonashi said:
this release here has an undervolt of around -30mV, but in my tg group i have one with around -55mV stable, i try to get lower, but dont have much time to test right now.
for the gpu overclock, i will soon release a overclocked version of my kernel, (2,2ghz cpu, 1ghz gpu, 1,3ghz ram and either 60hz or 66hz screen refresh rate)
Click to expand...
Click to collapse
OH it will be super kernel .. very hype to try that one
BigDaddyUnique said:
OH it will be super kernel .. very hype to try that one
Click to expand...
Click to collapse
released it
KamiKaonashi said:
i have another kernel with cpu overclock to 2,2ghz, gpu 1ghz and ram 1,3ghz. this kernel has 60hz or 66hz screen refresh rate, which i will release soon here.
on cpu side, we MAYBE can hit 2,4ghz, but thats the limit.
Click to expand...
Click to collapse
If you release an unlocked kernel for cpu with the option to play with voltages, i can play around to achieve 2.4 or more.Let me know
Testing the stock kernel and for the moment very fast, I will start to follow your work after the withdrawal of zeelog.
Update 19/03/2023
DarkMoon Kernel
Download Here
Changelog:
- switch to RAM OC as default, since it has no drawback
- reduce different log spam
- increase charging speed
- increase thermal threshold
- little more undervolt
- specific kernel optimization
- some other random changes not worth mentioning
as always, make backup, incase something goes wrong
Update 26/03/2023
Download: GoogleDrive
Notes:
- Anxiety I/O scheduler as standard
- Battery focused kernel
- Stock frequencies (2GHz CPU, 650MHz GPU)
- overclocked RAM to 1.3 GHz (doesnt affect battery)
- undervolted perfectly, now no random reboots anymore for those 3-4 people that had it lol
- tested on some A11, A12 and A13 roms, worked fine
- compiled using latest Neutron Clang 17
- added Boeffla Wakelock Blocker with mido specific wakelock blocks preconfigured
- added K-Lapse into kernel
- added K-profiles, set performance as standard
- deleted obsolete GPU governors
- fine tuned CPU boost
- reduced different kernel log spams
- optimized memory handling
- optimized fingerprint unlock, for faster unlocking
- faster charging when under 90% battery
- optimize thermals
- optimize touchscreen handling
- relax CPU latency requirements
- optimize battery even more
- built with RELR, LTO, Polly
- few other microoptimizations
- and few other stuff
- works on MIUI ports
KamiKaonashi said:
Update 26/03/2023
Download: GoogleDrive
Notes:
- Anxiety I/O scheduler as standard
- Battery focused kernel
- Stock frequencies (2GHz CPU, 650MHz GPU)
- overclocked RAM to 1.3 GHz (doesnt affect battery)
- undervolted perfectly, now no random reboots anymore for those 3-4 people that had it lol
- tested on some A11, A12 and A13 roms, worked fine
- compiled using latest Neutron Clang 17
- added Boeffla Wakelock Blocker with mido specific wakelock blocks preconfigured
- added K-Lapse into kernel
- added K-profiles, set performance as standard
- deleted obsolete GPU governors
- fine tuned CPU boost
- reduced different kernel log spams
- optimized memory handling
- optimized fingerprint unlock, for faster unlocking
- faster charging when under 90% battery
- optimize thermals
- optimize touchscreen handling
- relax CPU latency requirements
- optimize battery even more
- built with RELR, LTO, Polly
- few other microoptimizations
- and few other stuff
- works on MIUI ports
Click to expand...
Click to collapse
waiting for FF kernel update too
BigDaddyUnique said:
waiting for FF kernel update too
Click to expand...
Click to collapse
Will be updated tomorrow, havent had time to merge
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FrenziedFlame Kernel for Redmi Note 4 (Mido)based on Zeelogs 4.9 Kernel
Android Rom Support: AOSP / LineageOS based
Android Version Support: 11, 12, 12.1, 13
(there can be some Roms, that dont work with this kernel, due their different device trees)
- standard I/O Scheduler: Anxiety
- undervolted the heck out of it
- 2,2 GHz CPU Overclock
- 1 GHz GPU Overclock
- 1,3 GHz RAM Overclock
- 60 Hz and 66 Hz Versions (Screen Overclock)
- optimized for faster boot and app launches
- not tested on MIUI
- Antutu Score over 155000 points (can differ, depending on how used your EMMc storage is)
compiled with latest GCC and WeebX 17 Clang
!!! ALWAYS MAKE A BACKUP OF YOUR BOOT.IMG, INCASE SOMETHING GOES WRONG !!!
I'm not responsible for any damage on your device.
HOW TO INSTALL:
- boot into your recovery
- make backup of your boot.img
- flash FrenziedFlame.zip
- wait for it to finish
- wipe cache
- reboot
- enjoy performance
! for Screen overclock to take place, you need to lock and unlock your screen after booting !
if you have magisk installed, it will be automatically reinstalled, no need to reflash magisk
LATEST UPDATE HERE
Kernel Zip made with AnyKernel3
--> Kernel Source <--
flashed 66HZ version .. no problem so far .. no heating spikes .. all good
appreciate this amazing work .. <3
Oh, 66hz kernel for mido, that's something! Thank you
Fabulous !
crDroid 9.2 Android 13 + FrenziedFlame Kernel 66Hz
Hardware & software work without issues & bugs. No self-reboots.
Temps & charging are going marvelous & battery backup is quite good also.
Mido at its best. Stable, smooth & faster than ever
Thank you Kami !
for those interested in antutu score (my emmc storage is in good condition)
KamiKaonashi said:
for those interested in antutu score (my emmc storage is in good condition)
Click to expand...
Click to collapse
do i need to change governor with kernel apps or just flash and forget? thx btw for your hard work.
- using the normal 60hz
- 3/32 mido variant
inalam022 said:
View attachment 5865755
do i need to change governor with kernel apps or just flash and forget? thx btw for your hard work.
- using the normal 60hz
- 3/32 mido variant
Click to expand...
Click to collapse
Just flash and forget governors set by default, nice score
new update:
- reduce different log spam
- increase charging speed
- increase thermal threshold
- little more undervolt
- specific kernel optimization
- some other random changes not worth mentioning
as always, make backup, incase something goes wrong
Download
Frenzied Flame 66HZ
Frenzied Flame 60HZ
KamiKaonashi said:
new update:
- reduce different log spam
- increase charging speed
- increase thermal threshold
- little more undervolt
- specific kernel optimization
- some other random changes not worth mentioning
as always, make backup, incase something goes wrong
Download
Frenzied Flame 66HZ
Frenzied Flame 60HZ
Click to expand...
Click to collapse
updating. i think you need to have version so people can refer to and try previous version if something unstable. what do you think?
inalam022 said:
updating. i think you need to have version so people can refer to and try previous version if something unstable. what do you think?
Click to expand...
Click to collapse
Yeaaahhh gonna do that
KamiKaonashi said:
new update:
- reduce different log spam
- increase charging speed
- increase thermal threshold
- little more undervolt
- specific kernel optimization
- some other random changes not worth mentioning
as always, make backup, incase something goes wrong
Download
Frenzied Flame 66HZ
Frenzied Flame 60HZ
Click to expand...
Click to collapse
going to try .. im curious do we gonna see some more OC on CPU ?
also mentioning more details will be welcoming .. e.g. how much charging speed was and how much incresed or UnderVolt amount change ..
some tip .. i think editing first post (updating) will be better cuz people see it better ..
KamiKaonashi said:
new update:
- reduce different log spam
- increase charging speed
- increase thermal threshold
- little more undervolt
- specific kernel optimization
- some other random changes not worth mentioning
as always, make backup, incase something goes wrong
Download
Frenzied Flame 66HZ
Frenzied Flame 60HZ
Click to expand...
Click to collapse
Is it possible to adapt it for Android 10 as well?
Update 27-03-2023
- compiled using latest Neutron Clang 17
- added Boeffla Wakelock Blocker with mido specific wakelock blocks preconfigured
- added K-Lapse (https://github.com/tanish2k09/KLapse-Livedisplay) into kernel
- added K-profiles, set performance as standard
- deleted obsolete GPU governors
- fine tuned CPU boost
- reduced different kernel log spams
- optimized memory handling
- optimized fingerprint unlock, for faster unlocking
- faster charging when under 90% battery
- optimize thermals
- optimize touchscreen handling
- relax CPU latency requirements
- optimize battery even more
- built with RELR, LTO, Polly
- few other microoptimizations
- and few other stuff
- works on MIUI ports
DOWNLOAD 60Hz
DOWNLOAD 66Hz
Lord Sithek said:
Is it possible to adapt it for Android 10 as well?
Click to expand...
Click to collapse
I can try to
KamiKaonashi said:
Update 27-03-2023
- compiled using latest Neutron Clang 17
- added Boeffla Wakelock Blocker with mido specific wakelock blocks preconfigured
- added K-Lapse (https://github.com/tanish2k09/KLapse-Livedisplay) into kernel
- added K-profiles, set performance as standard
- deleted obsolete GPU governors
- fine tuned CPU boost
- reduced different kernel log spams
- optimized memory handling
- optimized fingerprint unlock, for faster unlocking
- faster charging when under 90% battery
- optimize thermals
- optimize touchscreen handling
- relax CPU latency requirements
- optimize battery even more
- built with RELR, LTO, Polly
- few other microoptimizations
- and few other stuff
- works on MIUI ports
DOWNLOAD 60Hz
DOWNLOAD 66Hz
Click to expand...
Click to collapse
does live display enabled by default? any way to disable it?
inalam022 said:
does live display enabled by default? any way to disable it?
Click to expand...
Click to collapse
Its disabled by default, if you want to use it, you need a kernelanager + root to edit and enable
does this kernel works with pixel experience rom 13?
Neeraj097 said:
does this kernel works with pixel experience rom 13?
Click to expand...
Click to collapse
It should, just make a backup of your boot.img and try
Any progress on cpu ocing beyond 2.2 ghz?
T3sla said:
Any progress on cpu ocing beyond 2.2 ghz?
Click to expand...
Click to collapse
sir is busy on developing for other devices .. be patient :/