{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FrenziedFlame Kernel for Redmi Note 4 (Mido)based on Zeelogs 4.9 Kernel
Android Rom Support: AOSP / LineageOS based
Android Version Support: 11, 12, 12.1, 13
(there can be some Roms, that dont work with this kernel, due their different device trees)
- standard I/O Scheduler: Anxiety
- undervolted the heck out of it
- 2,2 GHz CPU Overclock
- 1 GHz GPU Overclock
- 1,3 GHz RAM Overclock
- 60 Hz and 66 Hz Versions (Screen Overclock)
- optimized for faster boot and app launches
- not tested on MIUI
- Antutu Score over 155000 points (can differ, depending on how used your EMMc storage is)
compiled with latest GCC and WeebX 17 Clang
!!! ALWAYS MAKE A BACKUP OF YOUR BOOT.IMG, INCASE SOMETHING GOES WRONG !!!
I'm not responsible for any damage on your device.
HOW TO INSTALL:
- boot into your recovery
- make backup of your boot.img
- flash FrenziedFlame.zip
- wait for it to finish
- wipe cache
- reboot
- enjoy performance
! for Screen overclock to take place, you need to lock and unlock your screen after booting !
if you have magisk installed, it will be automatically reinstalled, no need to reflash magisk
LATEST UPDATE HERE
Kernel Zip made with AnyKernel3
--> Kernel Source <--
flashed 66HZ version .. no problem so far .. no heating spikes .. all good
appreciate this amazing work .. <3
Oh, 66hz kernel for mido, that's something! Thank you
Fabulous !
crDroid 9.2 Android 13 + FrenziedFlame Kernel 66Hz
Hardware & software work without issues & bugs. No self-reboots.
Temps & charging are going marvelous & battery backup is quite good also.
Mido at its best. Stable, smooth & faster than ever
Thank you Kami !
for those interested in antutu score (my emmc storage is in good condition)
KamiKaonashi said:
for those interested in antutu score (my emmc storage is in good condition)
Click to expand...
Click to collapse
do i need to change governor with kernel apps or just flash and forget? thx btw for your hard work.
- using the normal 60hz
- 3/32 mido variant
inalam022 said:
View attachment 5865755
do i need to change governor with kernel apps or just flash and forget? thx btw for your hard work.
- using the normal 60hz
- 3/32 mido variant
Click to expand...
Click to collapse
Just flash and forget governors set by default, nice score
new update:
- reduce different log spam
- increase charging speed
- increase thermal threshold
- little more undervolt
- specific kernel optimization
- some other random changes not worth mentioning
as always, make backup, incase something goes wrong
Download
Frenzied Flame 66HZ
Frenzied Flame 60HZ
KamiKaonashi said:
new update:
- reduce different log spam
- increase charging speed
- increase thermal threshold
- little more undervolt
- specific kernel optimization
- some other random changes not worth mentioning
as always, make backup, incase something goes wrong
Download
Frenzied Flame 66HZ
Frenzied Flame 60HZ
Click to expand...
Click to collapse
updating. i think you need to have version so people can refer to and try previous version if something unstable. what do you think?
inalam022 said:
updating. i think you need to have version so people can refer to and try previous version if something unstable. what do you think?
Click to expand...
Click to collapse
Yeaaahhh gonna do that
KamiKaonashi said:
new update:
- reduce different log spam
- increase charging speed
- increase thermal threshold
- little more undervolt
- specific kernel optimization
- some other random changes not worth mentioning
as always, make backup, incase something goes wrong
Download
Frenzied Flame 66HZ
Frenzied Flame 60HZ
Click to expand...
Click to collapse
going to try .. im curious do we gonna see some more OC on CPU ?
also mentioning more details will be welcoming .. e.g. how much charging speed was and how much incresed or UnderVolt amount change ..
some tip .. i think editing first post (updating) will be better cuz people see it better ..
KamiKaonashi said:
new update:
- reduce different log spam
- increase charging speed
- increase thermal threshold
- little more undervolt
- specific kernel optimization
- some other random changes not worth mentioning
as always, make backup, incase something goes wrong
Download
Frenzied Flame 66HZ
Frenzied Flame 60HZ
Click to expand...
Click to collapse
Is it possible to adapt it for Android 10 as well?
Update 27-03-2023
- compiled using latest Neutron Clang 17
- added Boeffla Wakelock Blocker with mido specific wakelock blocks preconfigured
- added K-Lapse (https://github.com/tanish2k09/KLapse-Livedisplay) into kernel
- added K-profiles, set performance as standard
- deleted obsolete GPU governors
- fine tuned CPU boost
- reduced different kernel log spams
- optimized memory handling
- optimized fingerprint unlock, for faster unlocking
- faster charging when under 90% battery
- optimize thermals
- optimize touchscreen handling
- relax CPU latency requirements
- optimize battery even more
- built with RELR, LTO, Polly
- few other microoptimizations
- and few other stuff
- works on MIUI ports
DOWNLOAD 60Hz
DOWNLOAD 66Hz
Lord Sithek said:
Is it possible to adapt it for Android 10 as well?
Click to expand...
Click to collapse
I can try to
KamiKaonashi said:
Update 27-03-2023
- compiled using latest Neutron Clang 17
- added Boeffla Wakelock Blocker with mido specific wakelock blocks preconfigured
- added K-Lapse (https://github.com/tanish2k09/KLapse-Livedisplay) into kernel
- added K-profiles, set performance as standard
- deleted obsolete GPU governors
- fine tuned CPU boost
- reduced different kernel log spams
- optimized memory handling
- optimized fingerprint unlock, for faster unlocking
- faster charging when under 90% battery
- optimize thermals
- optimize touchscreen handling
- relax CPU latency requirements
- optimize battery even more
- built with RELR, LTO, Polly
- few other microoptimizations
- and few other stuff
- works on MIUI ports
DOWNLOAD 60Hz
DOWNLOAD 66Hz
Click to expand...
Click to collapse
does live display enabled by default? any way to disable it?
inalam022 said:
does live display enabled by default? any way to disable it?
Click to expand...
Click to collapse
Its disabled by default, if you want to use it, you need a kernelanager + root to edit and enable
does this kernel works with pixel experience rom 13?
Neeraj097 said:
does this kernel works with pixel experience rom 13?
Click to expand...
Click to collapse
It should, just make a backup of your boot.img and try
Any progress on cpu ocing beyond 2.2 ghz?
T3sla said:
Any progress on cpu ocing beyond 2.2 ghz?
Click to expand...
Click to collapse
sir is busy on developing for other devices .. be patient :/
Related
About
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Following the popular franco.Kernel series I present you the new .35 tree based kernel for the 2.3.3 from LG and for the CM testing releases from mik.
(Because people keep flashing this **** with the wrong roms and come here crying "HALP" enjoy the big letter warning)
This kernel is not for 2.2 roms and I will laugh at you if you flash it together with 2.2. Not either will it work on miks 6.5.8 nor void forever...
franco.Kernel facebook group page: https://www.facebook.com/franco.Kernel
Features & Changelog
#4
* Added 652, 672, 691, 710 cpu frequencies
* Doubled busses frequencies - system will go faster but you'll possible lose some overclocking capabilities. Busses frequency OC > cpu OC.
* Added and tweaked Simple IO scheduler as it proved to be the fastest one for this device
* Added tun.ko and cifs.ko
* Added camera flicker bug fix
* Cleaned up some more debug ****
* One or two small tweaks
#3
* Completely rebased kernel
* No more blackscreen
* Based on CM's source
* All the tweaks and ****s you've been known about from me
* Franco magic?
* POWER
* BATTERY
* Well...I'll write a more detailed post later, too busy at the moment =)
08122011
- Touchscreen driver improved
- Same changes as the 27/11 release but now with wifi working
27112011
- Major speed up because fsyncs are not disabled
- SLUB memory allocator tweaked and made default
- Wifi Tethering fix attempt
- One or two other small tweaks and optimizations
- This release is labeled as a testing version
22112011
- Bye vsync toggle, it's not possible to change vsync without a kernel recompile
- Blackscreen bug fix attempt
- Touchscreen drivers optimized with the axis inversion workaround - changes by paolo, fserve, and me
12112011
- Vsync on/off toggle added. This is what I need be checked, I don't know if it's working: run this command via terminal or init.d script
Code:
echo "0" > /sys/module/mddi_hitachi_hvga/parameters/vsync_on
Echoing 0 it will disable vsync, echoing 1 will enable it.
- FSB/BUS overclock is lower, it will lower benchmarks a bit, but you won't notice any difference during normal usage and it will increase stability
- Obviously all the changes from the latest testing version are included
- This release is labeled as a testing version
02102011
- Smartass2 tuning
- Ck2 patch - system more responsive and noticeably faster
- Compiled with the latest Linaro 4.5.4 2011.09 toolchain
- Fix camera flicker - thanks Turducken
- Add Simple I/O scheduler and made the default - should fix the slow USB transfer bug
- net: Reorder incoming packets in PPPoLAC and PPPoPNS
- Misc fixes
- Should provide some extra battery power
19092011
- A lot of reverts to increase overall stability
- Smartass2 improvements
- BFQ i/o scheduler added and made default. VR scheduler makes the USB transfers slow
- Wifi change to drain less battery
- Clear RAM feature in Andy's rom works now
- Add Jhash3
- vfs_cache from 100 to 25
- init/calibrate backported from 2.6.39
- Some other improvements that can be seen in my github
29082011
- Reducing VM_READAHEAD from 4096 to 512. Should fix the occasional music stutter
- Some .config changes from fserve to increase battery life
- Tweaks and code cleanups from CAF to increase stability, battery and performance
- Cleaned up some governors
- Add SmartassV2 added yesterday from the original Smartass creator
- Re-written InteractiveX
- Vsync enabled by popular demand
- dirty_writeback_interval = 1500 centisecs
- Some reverts that should fix the reboots or random crashes
- Thanks across for the testing
- This release is labeled as a testing version
24082011
- Strange behavior with ext3/ext4 fixed
- More ARM architecture specific code
- Internet/data speed majorly increased
- **** legacy drivers removed
- Dunno what else
- This release is labeled as a testing version
21082011
- Filesystem tweaks from Code Aurora. Mainly ext3 and ext4 improved code
- Power management tweaks from Code Aurora
- Two Power management patches from Arco's kernel
- A lot of ARM architecture specific tweaks and improved code
- Some other small ****s
- This release is labeled as a testing version
16082011
- Battery display bug is fixed
- Terminal ****ting itself when closing fixed
- Headset button should work now too
- Some reverts to provide some extra stability
03082011
- Patched with 2.6.35.14 from upstream
- Tweaks in the touchscreen driver
- Lots of reverts from backported code to improve stability
- USB should be fixed
- CFS scheduler updates
- Wi-fi should be finally fine (I hope because I haven't touched wi-fi **** code)
- Camera should work fine now too
01082011
This is a complete re-written kernel from scratch featuring all the performance and battery patches from the last version plus a lot of new code.
The changes are all in my github so I don't need to list them here. I need you guys to test the kernel and tell me what is working and what is not working, which bugs do you find, if the performance is good, if battery is good etc etc. I don't want posts like "BLUETOOH HANDS FREE DOESN'T WORK FIX PLX" or "WAHT IS THE BAST GOVERNOR AND OC HALP PLOX" I want informative posts about your conclusions, if it kernel paniced what is your environment, your OC, your governor... stupid and non helpful posts will be ignored. If you want a good kernel, do you job as an user and help me too.
Click to expand...
Click to collapse
Take note of this, I don't care nor will pay attention if you say you're having battery drain if: you flashed the kernel sooner than 24hours of your complain post, if you didn't wipe your cache partition before or after flashing it, or if you didn't wipe your battery stats. If any of these three conditions are met at the time of your posting I will simply ignore it.
Downloads
Download:franco.Kernel-4
franco.Kernel updater app: https://market.android.com/details?id=com.franco.kernel.p500
Installation
1 - Reboot intro recovery
2 - Flash the latest kernel version from this topic
3 - Reboot
4 - Enjoy
People remember this is a pre-release, it's a gift for you all to test and play in the next days while I make it better, faster, more stable and the likes. Now I'll retire for a nice beach day after a hard nights work
wow downloading and will flash it right away!!!! cant wwait for it so test. thanks franco you are genious!
franciscofranco said:
People remember this is a pre-release, it's a gift for you all to test and play in the next days while I make it better, faster, more stable and the likes. Now I'll retire for a nice beach day after a hard nights work
Click to expand...
Click to collapse
go ahead man. you deserve the best. your v18 is still as stable as rock so I can wait for the final version of this. i will flash this now.
I know testing isn't all abt posting quadrant scores ...but anyways this kernel gives [email protected] mhz
Sent from my LG-P500 using XDA App
thx franco.
downloading....
Rotation not fixed...not a huge problem anyways. Thanks
Sent from my LG-P500 using XDA App
Flashed it, seems stable at 710Mhz (which is the maximum my phone can get). Neocore [email protected]/Smartass running on official 2.3.3. That is 10FPS higher than stock kernel and 2 fps higher than stock OC'[email protected] stock kernel.
Will test further and post.
Neocore 55.1 [email protected] 806 MHz running on void forever
Sent from my LG-P500 using XDA App
franciscofranco said:
People remember this is a pre-release, it's a gift for you all to test and play in the next days while I make it better, faster, more stable and the likes. Now I'll retire for a nice beach day after a hard nights work
Click to expand...
Click to collapse
Are you using the LG Userspace Drivers?
can i know how much quandrant score for 3D of this kernel with overclock to 768mhz in stock 2.3.3 rom and non stock rom?
RevengeFNF said:
Are you using the LG Userspace Drivers?
Click to expand...
Click to collapse
As Franco said in the other topic, these drivers are not in the kernel but integrated in roms so we have to wait for mik, andy or Noejn to update their roms
Quadrant score after freeing my memory card is 1960
Sent from my LG-P500 using XDA App
thankxx man..
sajjan said:
Quadrant score after freeing my memory card is 1960
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
what rom are u using? are u on the new baseband?
dark-k said:
As Franco said in the other topic, these drivers are not in the kernel but integrated in roms so we have to wait for mik, andy or Noejn to update their roms
Click to expand...
Click to collapse
Ok, and just for curiosity, in what consist those drivers, that give a huge boost in 3D?
franco,just wanna say thank you. I can see your passion in making our O1 better than ever. thanks a lot man. Know that your hard work is very much appreciated. More power. (^^,)
Sent from my LG-P500 using XDA App
I can boot v.2.2 with this kernel, can see some notifications in "toast",
but there is almost immediate shutdown with "Battery overheated"
RevengeFNF said:
Ok, and just for curiosity, in what consist those drivers, that give a huge boost in 3D?
Click to expand...
Click to collapse
Yes, a huge boost :
mik_os said:
kernel: 2.6.35 @ 600mhz
Click to expand...
Click to collapse
Just to inform I'm in stock v20g with just very few modifications by me and the kernel it's working without the bugs you describe
BD-Ace Kernel
This kernel is my daily driver on my Inspire. This is also my first development effort on any device/platform. If it doesn't work on my device, you will never see it available here. I plan on having something that works smoothly, but is hopefully universal and appealing to a wide audience
This kernel originated from HTC released GB 2.6.35 source code for the Inspire4G -(Ace). It was initially build for use with ClearDroid Rom, but in the interest of FOSS its now for everyone
From 1.1.4 on you will notice two versions
"Safe" Version is to be used on release builds, the Maximum Overclock is capped at 1.3GHz to stifle hot CPU issues
"I'm a BigBoy, I'll do what I want" Version is exactly like "Safe", EXCEPT max overclock is set to 1.8GHz
Starting with 1.1.7 there will now be 3 versions
Safe (capped at 1.3Ghz O/C), BigBoy (capped at 1.8Ghz O/C), and WCH Rage (2.2Ghz O/C)
Install
Download, flash zip in CWM (Clear Dalvik), wait for first boot (sometimes takes a while), enjoy!!!!
Thanks to:
ClearDroid - Initial Encouragement, ClearDroid Rom
Erasmux - Smartass2 implementation
Koush - AnyKernel
Inspired By:
Those before me who were nice enough to make how-to's or show their work for me to learn from
LeeDroid
LorD ClockaN
Erasmux
RichardTrip
Cyanogen Team
and more
Warranty:
Yeah right. Consider any form of warranty Voided from here on out.
Sourcecode
Changelogs and Downloads
V 1.1.7 - Built 2/3/12 ----Safe ---- BigBoy ---- WCHRage
Iron out bugs
Create WCH Rage -- O/C to 2.2Ghz <Not for normal use , but still neat>
Prox Sensor Permission Fix
Lower wifi connect min to -108
Allow flash to work at lower battery level
"200" Magic lines" linux patch
Add Interactivex Governor
Decrease Idle time before sleep
Decrease Idle time before cpu rampdown
Boost BT Audio Max Output
Remove 2 way Call Record - It burns battery
CIFS Support
v 1.1.6 - Testing, had random reboot issues - Dead, not for release
v 1.1.5 - Built 11/15/11 - "Safe"
v 1.1.5 - Built 11/15/11 - "BigBoy"
Add call Recoring Support - From Here
Make 1.3GHz be the breaking point from "Safe" to "BigBoy"
v 1.1.4 - Built 11/09/11 - "Safe"
v 1.1.4 - "BigBoy"
Remove Conservative and userspace Governors
Add 'CPU VDD levels Sysfs interface'
ARM: 6989/1: perf: do not start the PMU when no events are present
Implement easy ways to cap OC at 1420800KHz while easy to add back
Remove 200000 MHz Freq (never would set)
v 1.1.31 - Built 10/31/11
GPU Tweaks
Allocate More Memory to GPU
Boost Battery Charged Info
Boost Dalavik VM Readahead Memory size to 4096MB Max From 128 MB
Removed latest Undervoltage tweak
v 1.1.3 - Built 10/31/11 -Too Undervolted - Fail
GPU Tweaks
Allocate More Memory to GPU
Boost Audio
Boost Battery Charged Info
Boost Dalavik VM Memmory size to 4096MB Max From 128 MB
Tweaked Undervoltage by -25 more
v 1.1.2 - Built 10/30/11 - included in ClearDroid 1.3.1
Reduced Min Clock Speed to 200Mhz
v1.1.1 - Built 10/16/11 - included in ClearDroid 1.3.0
Overclocked to 1.8GHz and undervolt
CPU Scale up on system input
v1.0.7 - Built 10/16/11
GPU+ Patch
v 1.0.6 -Built 10/15/11
Add SmartassV2
v 1.0.51 - Built 10/13/11
CPU Min Max set to 1036800/245760
Default Govenor set to ‘Interactive’
ext4 file system support - built in
v 1.0.5 - Fail
Overclock
v 1.0.4 - Included in ClearDroid 1.2.4
added Tun Driver - Module
set Conservative Governor as default
added Interactive Governor
v 1.0.3
Change Version Naming
Bumped Up max CPU Frequency - Failed - But still there
v0.0.2
CPU Power Management - powersave, and conservative enabled
v0.0.1 - Released Cleardroid 1.2.3 - Called Version 1.00
Initial Working Build
Only thing changed from HTC stock is perflock removal
Questions
[Q] Is this a sense kernel?
[A] It is my daily driver on my Inspire using Cleardroid (A stock based sense ROM)
[Q] Will this work on XYZ super duper awesome rom?
[A] Maybe, try it and please post if it does or doesn't work
[Q] My battery life isnt as awsome as everyone else makes it out to be
[A] I personally have found that preforming a battery stats wipe in cwm and then a few dead/fully charged cycles seems to help mine out on reporting correctly.
[Q] Why do you really need 2 versions, with just the Overclock changed?
[A] I and some other users have had some random reboot issues while running at higher speeds. So, "Safe" is to help stop that for stable builds. See Here
[Q] But I dont like not having the maximum capability, let me have 1.8GHz
[A] Then download the current BigBoy version an have at it.
[Q] While trying to set my speed above a high 1.4GHz, my phone locks up......WTF
[A] To use 1.4GHz and up: 1st set your govenor to "Performance", the move the slider higher
[Q] What if I dont want call recording
[A] Dont install any app that records calls
What Roms does this kernel work with?
Confirmed to work -
ClearDroid 1.2.4 and above
CoreDroid
Doesn't work -
Any AOSP Based (non-sense)
Has complications with - /
BinDroid - Mic doesnt work on speaker phone
Energy ROM w/Sense 3.5 - Mic doesnt work on speaker phone
GB Sense 3.0i / Stock GB 2.3.5 - Video playback and usb settings
RCMix3D Runny v3.3. - No Sound out
Funzy ROM - No Sound Out
Any ROM based on DHD instead of Inspire. ~ There is just enough of a difference to cause issues
Score! Well done bro! This is my favorite kernel to date. Everything just... Works!
ClearD said:
Score! Well done bro! This is my favorite kernel to date. Everything just... Works!
Click to expand...
Click to collapse
I agree I'm Loving this Big Boy...Nice!
I've been making some Headline Banners to Post to Threads 1st Page, would you like a BD-Ace?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah, Ill hit you up on talk
Has anybody from other ROM's tried this? Any feedback is great.
It's Saturday, I'm bored, so I downloaded a new kernel and tried it.
I used this on RCMix3D Runny v3.3. It works fine as far as I can tell, haven't done extensive testing yet because I have to make some dinner. However, the first thing I noticed is that the rear speaker doesn't work. No music, no ringtone, etc. Earpiece works fine.
Other than that, it seems nice and snappy.
Do you know if that is Inspire Based or DHD?
<warning>**** I Void Warranties ****</warning>
bdaman80 said:
Do you know if that is Inspire Based or DHD?
<warning>**** I Void Warranties ****</warning>
Click to expand...
Click to collapse
Don't know. Model is listed as Inspire under settings. How would I find out?
If you wouldn't mind sending me a copy of your /proc/config.gz I'll see if its compatible at all
<warning>**** I Void Warranties ****</warning>
Sorry, I backed up to my previous rom. It seems that the microphone didn't work either. Couldn't use it.
If I have time tomorrow, I'll get the info for you if you still want it.
Ephemeralness said:
Sorry, I backed up to my previous rom. It seems that the microphone didn't work either. Couldn't use it.
If I have time tomorrow, I'll get the info for you if you still want it.
Click to expand...
Click to collapse
Yes that would be great, thank you
Working on Some fresh baked newness.
call recording here we go. Its in testting now
Out of curiosity does this Rom support 3way calling. I tried it the other day and couldn't figure it out.
Sent from my CLEARDROID Inspire thanks to AT&T's string and a cup method.
Should be all good on the kernel side
Make call to first person > tap menu - select add call > pick second number - dial > tap menu - select merge calls > enjoy
http://www.multiupload.com/PUOD4FJ3UC
Sweet. I'm excited about the recording.
Sent from my CLEARDROID Inspire thanks to AT&T's string and a cup method.
See that teaser did ya?
<warning>**** I Void Warranties ****</warning>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nebula kernel is for AOSP based KitKat android 4.4+ ROMs
and AOSP based Lollipop android 5.0+ ROMs
Supports both GT-i9105 and GT-i9105P
Original nebula kernel thread for i9082 is HERE
I do not own Samsung Galaxy S2 Plus
Download the latest PERFORMANCE CONTROL APP to utilize the full potential of the kernel.
Brief explanation of few of the features in nebula can be found in the third post. For more info, use Google.
FEATURES
Compiled using Linaro 4.9.1 2014-05 toolchain
Based on kernel version 3.0.101
Additional Governors: SmartassV2, SmartassH3, Lulzactive, LulzactiveQ
Additonal I/O Schedulers: ROW, SIO, SIOPLUS, VR, ZEN, BFQ
Overclock: 1.3 Ghz, 1.4 Ghz, 1.5 Ghz, 1.6 Ghz
F2FS support
CPU Boost driver
UKSM (Ultra KSM) support (enable it in Performance Control app)
Frandom
Dynamic Sync Control (enable it in Performance Control app)
Asynchronous FSync ported from HTC One
Cross Memory Attach
Entropy tweaks
Increased read-ahead from 16/128 to 32/2048 (can be customized in Performance Control app)
Disabled Cyclic Redundancy Checks (CRC) for better performance
Many patches, fixes and improvements from codeaurora
Many more performance and battery friendly tweaks
INSTALLATION
Download the latest nebula zip
Flash using CWM recovery
Wipe cache
Wipe dalvik cache
Reboot
DOWNLOADS
nebula kernel
(Please don't make mirror links of the kernel)
SOURCE
Source code of the kernel can be found at my Gihub.
CREDITS
- pawitp - nebula is based on his kernel source for CM11
- to all the developers whose mods I have included in my kernel
- @k2wl - for his extensive guide on kernel compilation. Big thanx to him.
- @CoolDevelopment - for maintaining the kernel source at SamsungBCM-Cyanogenmod repo and testing the 1st build
- @beastaki23 - for vibration fixes
- @SH1M4BD3 - for testing the 1st build
CHANGELOG
Changelog is available on nebula kernel wiki too
v3.20
- Fixes to network related kernel code
---x---x---x---
v3.18
- Stability fixes (check source code commits for details)
---x---x---x---
v3.16
- Backport timed General-Purpose Input/Ouput from hammerhead (Nexus 5)
- Improve multi-touch event handling
- Improve compiled kernel code
- Other fixes and improvements
---x---x---x---
v3.14
- Fix CVE-2014-3153
---x---x---x---
v3.13
- Add support for s2ve (GT-i9105)
(This and all future versions will work on both, GT-i9105 and GT-i9105P)
---x---x---x---
v3.12
- Compiled using the latest Linaro 4.9.1 - 2014.05 toolchain
- New I/O scheduler - BFQ (latest version - v7r4 - released on 18th May 2014)
- Memory Management: pass readahead info down to the I/O scheduler
- lib/memcopy: use glibc version
---x---x---x---
v3.10
- Compiled using the latest Linaro 4.9.1 - 2014.04 toolchain
- Memory management - lazy cache flushing on non-mapped pages
- Many updates to Device Mapper
- Use proper memory barriers for bitops
- softirq: reduce latencies
- sync: don't block the flusher thread waiting on IO
- ext4: Speed up FITRIM by recording flags in ext4_group_info
- ext4: speed up truncate/unlink by not using bforget() unless needed
- vmscan: add customisable shrinker batch size
- Other fixes and performance tweaks
---x---x---x---
v3.04
- CPU boost driver - set tunables
- New governor - LulzactiveQ
- New I/O scheduler - SIOPLUS
- Wait just 1 second, instead of 4 seconds for other CPU core to halt
- Other fixes and performance tweaks
---x---x---x---
v3.00
- Initial release
---x---x---x---
BRIEF EXPLANATION ABOUT KERNEL FEATURES
UKSM
UKSM is about de-duplication of data in system memory rather than being another de-duplicating file-system. This improves RAM usage.
Dynamic Sync Control
The dynamic sync control interface uses Android kernel's unique early suspend / late resume interface. While screen is on, file sync is disabled. When screen is off, a file sync is called to flush all outstanding writes and restore file sync operation as normal.
Frandom
Frandom is a Linux kernel random number generator, which is 10-50 times faster than what you get from Linux' built-in /dev/urandom. It uses very little (/dev/frandom) or none (/dev/erandom) of the kernel's entropy pool, so it is very useful for applications that require a handy source for lots of random data.
CPU Boost driver
When certain bursty and important events take place, it might take a while for the current cpufreq governor to notice the new load and react to it. That would result in poor user experience. To alleviate this, the cpu-boost driver boosts the frequency of a CPU for a short duration to maintain good user experience while the governor catches up.
FAQ
On which ROM can I install nebula?
- nebula can be used on any AOSP kitkat 4.4+ based ROM. (Carbon, SlimKat, CM11)
What is the best and most stable configuration for nebula?
- Configuration depends from user to user. Still, the most stable configuration according to me and that I use is below. It might differ for you.
- Governor: SmartassV2
- Max. freq: 1.2 Ghz (OCing doesn't really have an increased and noticeable performance, rather it heats the processor and wastes battery for a marginal gain in performance as well as creates instability - random reboots etc. Google more about OC.) (Read the description on this commit.)
- I/O Scheduler - SIO
- Enable UKSM (from Performance Control app)
- Enable Dynamic FSync (from Performance Control app)
- I'll update this configuration as more tweaks are added to nebula
I get random reboots, what should I do?
- I am working on the kernel for myself and the kernel is quite stable for me. Still, if you face reboots see below:
- Make sure you followed the installation instruction written in Post #1.
- Make sure you "Fix permissions".
- OCing will always cause instability. Try reducing the max frequency to 1.2 Ghz
- It is quite possible that you don't know how to use a custom kernel. Not everything needs to be set at HIGHEST. Just because an "option" is there doesn't mean you have to select it. Try changing the configuration that meets your needs and satisfies you. If you set up the kernel properly, it would stop giving you random reboots.
- The only way to get things fixed is to provide logs. I cannot fix that I cannot see. Google, how to take logs to find and solve kernel issues. (kmsg/last_kmsg)
- Tell me a way in which I can reproduce the issue on my phone.
Thank you very much
Sent from my SM-T210 using XDA Free mobile app
Works great, thanks :3
Gonna try with ur remix rom
No problems yet and looks good. Thanks
I wanna ask about cpu boost option, where i can enbale it?
rs tony said:
Gonna try with ur remix rom
No problems yet and looks good. Thanks
I wanna ask about cpu boost option, where i can enbale it?
Click to expand...
Click to collapse
It is already enabled.
It is always nice to see something new to our device. Great work!
YezZz finally nebula kernel for S2+
Is for gt-i9105
Inviato dal mio GT-I9105 utilizzando Tapatalk
deleted*
how i can enable Ultra-Kernel Samepage Merging(UKSM) ?? i can't find in performance control app
anastasiszn said:
how i can enable Ultra-Kernel Samepage Merging(UKSM) ?? i can't find in performance control app
Click to expand...
Click to collapse
Sent from my GT-I9082 using Tapatalk
Hi,
thanks for a new kernel!
Does anyone know whether calls via bluetooth (not the same as music via bt) work?
DeKiesel said:
Hi,
thanks for a new kernel!
Does anyone know whether calls via bluetooth (not the same as music via bt) work?
Click to expand...
Click to collapse
It would be nice if someone tests it, because it's compiled with grands sources
Sent from my GT-I9105P using XDA Premium 4 mobile app
CoolDevelopment said:
It would be nice if someone tests it, because it's compiled with grands sources
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I wont be at home before 21h tonight. In case no one beats me to it I will try it then.
nebula kernel
Gov : ondemand
i/o : sio
cpu : 1600
antutu score : 11880
moshkernel
Gov : ondemand
i/o : sio
cpu : 1300
antutu score : 12180
1st release broh, just hold a sec till next version release, he work on it
Sent from my GT-I9105P
anastasiszn said:
nebula kernel
Gov : ondemand
i/o : sio
cpu : 1600
antutu score : 11880
moshkernel
Gov : ondemand
i/o : sio
cpu : 1300
antutu score : 12180
Click to expand...
Click to collapse
Higher cpu level doesn't always give u better scores in benchmark
rs tony said:
Higher cpu level doesn't always give u better scores in benchmark
Click to expand...
Click to collapse
ok tell me your best score with this kernel or show me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
for Note 4 & Note Edge & Note 4 S-LTE
Requirements for using the kernel
Model Variants: SM-N910S/K/L, SM-N915S/K/L, SM-N916S/K/L
Tested Device: SM-N910S/K/L & SM-N915S/K/L & SM-N916S/K/L
Installed OS: TouchWiz M 6.0.1, M Base Note7 and All Porting ROMs
Main Features
• All porting ROM support.
• Fixed a screen-touch issue that occurred while waking from sleep mode.
-- Problems exist in stock(samsung) firmware.
• Synapse support.
• SELinux Permissive.
• Linux 3.10 upstream.
• Compile with UBERTC 7.2.1 toolchain.
• F2FS fully support.
• Gametuner-Mod: Game Booster Mode, Provides intelligent performance enhancement mode in conjunction with Samsung-Gametuner.
• Apply Fake KNOX.
• Apply chacha20 to random (entropy).
• Linaro LSK-v3.18-Energy-Aware Scheduler (EAS) Backport.
- EAS simplifies power and performance management through scheduler-driven tuning to manage more efficiently.
• Improved storage performance and longevity by applying lazytime mount options.
- Similar to Dynamic Fsync, but operates at the file system level and has no risk of data loss.
• CPU/GPU UC & OC.
• CPU/GPU/BUS voltage regulation.
• R12P0 GPU Driver(Stock is R7P0) & Performance Tuning.
• NVIDIA cpu relax patch, reduced heat & increased battery life.
• HMP tuning Interface.
• Enable NEON in kernel mode.
• Detail charging circuit control allows faster charging.
• Added I/O Scheduler 'bfq, fifo, fiops, row, sio, zen'.
• Enable Westwood tcp/ip congestion control.
• LED FADE control.
• Qualcomm interactive (renamed cafactive) cpu governor porting @by arter97.
• Added battery-friendly impulse governor and more powerful ironactive (interactive in the Qualcomm 4.4 kernel) governor.
• Provides an add-on that keep kernel settings on un-rooted devices.
• Synapse: System Tweak add-on available.
• Synapse: Provides configuration profile separated by performance / battery / stability.
• Many other optimization applications.
Credit (Thanks. to)
• AndreiLux - Perseus5433 kernel.
• UpInTheAir - SkyHigh Kernel.
• halaszk - Perseus-halaszk-universal5433 kernel.
• arter97, gokhanmoral, faux123, yank555.lu
• RaymanFX (AOSP Kernel & Vendor).
• [email protected] Cafe, 시아씨@Develoid Cafe.
• All members of the G+ PRIME-BETA User's Community.
• And all of commited in sources & all of xda developers.
Change Log
Detail(Korean): http://enfree.com/prime/?page=changelog&device=N910
Download
Source Code
https://github.com/dwander/Linaro-base/tree/trelte_mm
reserved
Oh! Great! Big thanks!!!!!!!
I may have missed it but couldn't see if it supports extended batteries. Can you clarify? Also thank you for sharing.
Sorry for reporting this but kernel is not booting in My N910C.Its stuck at samsung logo screen.
EvilKing009 said:
Sorry for reporting this but kernel is not booting in My N910C.Its stuck at samsung logo screen.
Click to expand...
Click to collapse
Good thing I read this part:
Tested Device: SM-N910S/K/L & SM-N915S/K/L & SM-N916S/K/L
Thanks for the feedback. :good:
EvilKing009 said:
Sorry for reporting this but kernel is not booting in My N910C.Its stuck at samsung logo screen.
Click to expand...
Click to collapse
did you wiped cache/dalvik after installed?
mine is stucked too, reverting to suemax xD - ROM Nemesis Refined.
i would utilize that kernel, the improvements got me
EvilKing009 said:
Sorry for reporting this but kernel is not booting in My N910C.Its stuck at samsung logo screen.
Click to expand...
Click to collapse
It's not working for my N910H... I'm on AirROM 2.1 Final
The n910c did not work on my phone. air v 2.1 final is installed.
it is not working on n910c with air rom, it stuck on boot logo
kozgel said:
it is not working on n910c with air rom, it stuck on boot logo
Click to expand...
Click to collapse
The kernel for Korean Note 4 ( 910 916 S/L/K). Pls read the title
Minhkyo said:
The kernel for Korean Note 4 ( 910 916 S/L/K). Pls read the title
Click to expand...
Click to collapse
in title n910c is in the supported model list only not tested on it, you must read title again:
Requirements for using the kernel
Model Variants: SM-N910S/K/L/C/H/U, SM-N915S/K/L, SM-N916S/K/L
Tested Device: SM-N910S/K/L & SM-N915S/K/L & SM-N916S/K/L
Installed OS: TouchWiz M 6.0.1, M Base Note7 and All Porting ROMs
Would be better to rename the Thread title to the actual supported variants, most people dont read the entire thread and look at "tested on"
if we look at bootimg.tar.xz using winrar, there is two separate kernels for n910ch(n910c and n910h) and n910kor (assuming korean version?)
so im pretty sure n910c is supposed to be supported, its just @Hyunwoo AHN doesnt have the device to test it on
i was waiting for this kernel thank u @dwander i am a fan from tunisia ....
i am using this kernel on my n910s and its awsome so fluid and doing great gob but its seems need some extra feature that is missing
i have some suggestion :
audio driver to improve the audio qualiy and boost it
batterie calibration tool
more battrie friendly govs
i cant see any NVIDIA cpu relax patch sysfs switchs
cortexbrain script for more automated behaviour
led brightness control
DOZE controle
adaptive screen brightness
mdnie controle
Energy-Aware Scheduling
Hotplug Governor control for more cpu cores control........... i guess this will be the best for batterie
i dont know maybe i have suggest somthing wrong
anyway i am in love with ur work sir @dwander and i wich i can donate
thank u
waelchateur said:
i was waiting for this kernel thank u @dwander i am a fan from tunisia ....
i am using this kernel on my n910s and its awsome so fluid and doing great gob but its seems need some extra feature that is missing
i have some suggestion :
audio driver to improve the audio qualiy and boost it
batterie calibration tool
more battrie friendly govs
i cant see any NVIDIA cpu relax patch sysfs switchs
cortexbrain script for more automated behaviour
led brightness control
DOZE controle
adaptive screen brightness
mdnie controle
Energy-Aware Scheduling
Hotplug Governor control for more cpu cores control........... i guess this will be the best for batterie
i dont know maybe i have suggest somthing wrong
anyway i am in love with ur work sir @dwander and i wich i can donate
thank u
Click to expand...
Click to collapse
audio driver to improve the audio quality and boost it
The audio chip of Note4 does not have a custom driver. To do that, need the help of a professional hardware engineer. If you find it in another kernel it will not work properly or there will be a known error.
batterie calibration tool
The battery information of note 4 is not compensated, so unnecessary function.
more battrie friendly govs
Note4 is based on HMP. There is no custom governor compatible with HMP yet. Present is the best choice. I will not include the wrong governor.
i cant see any NVIDIA cpu relax patch sysfs switchs
Sorry, I deleted it unnecessary.
cortexbrain script for more automated behavior
You may think it looks good, but it is a very unnecessary function. I'm already doing optimization in some other way.
led brightness control
I did not work properly when I tested it. (Not supported by chip)
DOZE controle
Unnecessary function. There are a lot of third party apps that are better and more comfortable to use.
adaptive screen brightness
Samsung Firmware is already supported by default.
mdnie controle
To do that, need the help of a professional hardware engineer.
Energy-Aware Scheduling
What are you talking about? This is the only benefit of this kernel that can not be seen by any other linux-3.10 base kernels.
Hotplug Governor control for more CPU cores control.
- Samsung-Hotplug does not have control method. I've ported the S6 hot-plug driver, but it's been buggy and I gave up because it takes too much time to be perfect.
- The Samsung-hotplug driver in Note 4 operates when the display power is turned off, and stops when the display is turned on.
- If you want custom hotplugs like Thunder-Hotplug, it's a lot slower because it works too slowly on Exynos.
Thanks for your interest in my kernel.
I have maintained this kernel for two years, testing it with a lot of features in it.
If there are no minor functions or are lacking, it is determined by deep anxieties.
HOLY **** THIS KERNEL IS SO FAST !(;ﾟoﾟ)o/￣￣￣￣￣￣￣~ >ﾟ))))彡
So, err, just want to say thank you for this awesome kernel. Coming from the S5 Broadband LTE-A (where the lack of kernel is a real thing and thermal throttling and lag is also stronk), your kernel combined with the Exynos Note 4's excellent hardware is a life saver. Thanks again (◕‿◕✿)
So @Hyunwoo AHN you have no plans to add n910c support? Just change the title?
Look at the 1st page there are a lot of n910c users here. You are the most silence dev I have ever seen wtf
Look at Spacelemon kernel thread the dev release test versions for us other exynos note4 users to test. Then if it boots and/or working he releases it
robert1337 said:
So @Hyunwoo AHN you have no plans to add n910c support? Just change the title?
Look at the 1st page there are a lot of n910c users here. You are the most silence dev I have ever seen wtf
Look at Spacelemon kernel thread the dev release test versions for us other exynos note4 users to test. Then if it boots and/or working he releases it
Click to expand...
Click to collapse
Sorry I do not know English well, I'm getting help from translator.
So feedback is hard.
Support for the N910C is planned.
However, this kernel is a complete kernel with no improvement, and I am focusing on the kernel for S7.
It's not easy to focus on both kernels, and testing for non-booting needs to build many test builds.
And, when the test build comes out, I need a tester that gives feedback right away.
There are no N910C users around me and they are all Koreans(S/K/L users).
If someone has an N910C/U/H user who will provide fast feedback to emails or telegrams, contact us. [email protected]
FINALLY ........ Prime kernel is on XDA, finally. Well done mate.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DarkMoon Kernel for Redmi Note 4 (Mido)based on Zeelogs 4.9 Kernel
Android Rom Support: AOSP / LineageOS based
Android Version Support: 11, 12, 12.1, 13
(there can be some Roms, that dont work with this kernel, due their different device trees)
optimized for battery and performance
- standard I/O Scheduler: Anxiety
- undervolted the heck out of it
2 Versions
one with stock frequencies
one with just RAM overclock (1,3GHz)
compiled with latest GCC and WeebX Clang
!!! ALWAYS MAKE A BACKUP OF YOUR BOOT.IMG, INCASE SOMETHING GOES WRONG !!!
I'm not responsible for any damage on your device.
HOW TO INSTALL:
- boot into your recovery
- make backup of your boot.img
- flash DarkMoon.zip
- wait for it to finish
- wipe cache
- reboot
- enjoy battery life and smoothness
if you have magisk installed, it will be automatically reinstalled, no need to reflash magisk
DOWNLOAD KERNEL
DOWNLOAD RAM OC KERNEL
Download 08/04/23 update
Kernel Zip made with AnyKernel3
--> Kernel Source <--
can i flash for mi max 2,hardly the cpu is the same
unicunic8 said:
can i flash for mi max 2,hardly the cpu is the same
Click to expand...
Click to collapse
No, its for mido only, sorry
KamiKaonashi said:
No, its for mido only, sorry
Click to expand...
Click to collapse
Ok thz u
What is the default ram speed of mido?
T3sla said:
What is the default ram speed of mido?
Click to expand...
Click to collapse
932mhz
KamiKaonashi said:
932mhz
Click to expand...
Click to collapse
Wow, that's a huge improvement, well done!
T3sla said:
Wow, that's a huge improvement, well done!
Click to expand...
Click to collapse
We could go higher, but theres not much improvement after 1.5ghz, so i stick to 1.3. as there is an improvement in UI and no difference in battery consumption
KamiKaonashi said:
We could go higher, but theres not much improvement after 1.5ghz, so i stick to 1.3. as there is an improvement in UI and no difference in battery consumption
Click to expand...
Click to collapse
Can we oc cpu too? I mean beyond 2.2 which some kernels do. It would be a whole different mido if we had 30-35% oc on cpu.
Oh it seems we have sth new to try !
what combo u suggest with this ? i mean i have LOS now .. wanna try CrDroid maybe
how much mV did u undervolted CPU ? (ive seen some kernel with -50 mV stable)
can we have CPU OC version too ?
T3sla said:
Can we oc cpu too? I mean beyond 2.2 which some kernels do. It would be a whole different mido if we had 30-35% oc on cpu.
Click to expand...
Click to collapse
i have another kernel with cpu overclock to 2,2ghz, gpu 1ghz and ram 1,3ghz. this kernel has 60hz or 66hz screen refresh rate, which i will release soon here.
on cpu side, we MAYBE can hit 2,4ghz, but thats the limit.
BigDaddyUnique said:
Oh it seems we have sth new to try !
what combo u suggest with this ? i mean i have LOS now .. wanna try CrDroid maybe
how much mV did u undervolted CPU ? (ive seen some kernel with -50 mV stable)
can we have CPU OC version too ?
Click to expand...
Click to collapse
this release here has an undervolt of around -30mV, but in my tg group i have one with around -55mV stable, i try to get lower, but dont have much time to test right now.
for the gpu overclock, i will soon release a overclocked version of my kernel, (2,2ghz cpu, 1ghz gpu, 1,3ghz ram and either 60hz or 66hz screen refresh rate)
KamiKaonashi said:
this release here has an undervolt of around -30mV, but in my tg group i have one with around -55mV stable, i try to get lower, but dont have much time to test right now.
for the gpu overclock, i will soon release a overclocked version of my kernel, (2,2ghz cpu, 1ghz gpu, 1,3ghz ram and either 60hz or 66hz screen refresh rate)
Click to expand...
Click to collapse
OH it will be super kernel .. very hype to try that one
BigDaddyUnique said:
OH it will be super kernel .. very hype to try that one
Click to expand...
Click to collapse
released it
KamiKaonashi said:
i have another kernel with cpu overclock to 2,2ghz, gpu 1ghz and ram 1,3ghz. this kernel has 60hz or 66hz screen refresh rate, which i will release soon here.
on cpu side, we MAYBE can hit 2,4ghz, but thats the limit.
Click to expand...
Click to collapse
If you release an unlocked kernel for cpu with the option to play with voltages, i can play around to achieve 2.4 or more.Let me know
Testing the stock kernel and for the moment very fast, I will start to follow your work after the withdrawal of zeelog.
Update 19/03/2023
DarkMoon Kernel
Download Here
Changelog:
- switch to RAM OC as default, since it has no drawback
- reduce different log spam
- increase charging speed
- increase thermal threshold
- little more undervolt
- specific kernel optimization
- some other random changes not worth mentioning
as always, make backup, incase something goes wrong
Update 26/03/2023
Download: GoogleDrive
Notes:
- Anxiety I/O scheduler as standard
- Battery focused kernel
- Stock frequencies (2GHz CPU, 650MHz GPU)
- overclocked RAM to 1.3 GHz (doesnt affect battery)
- undervolted perfectly, now no random reboots anymore for those 3-4 people that had it lol
- tested on some A11, A12 and A13 roms, worked fine
- compiled using latest Neutron Clang 17
- added Boeffla Wakelock Blocker with mido specific wakelock blocks preconfigured
- added K-Lapse into kernel
- added K-profiles, set performance as standard
- deleted obsolete GPU governors
- fine tuned CPU boost
- reduced different kernel log spams
- optimized memory handling
- optimized fingerprint unlock, for faster unlocking
- faster charging when under 90% battery
- optimize thermals
- optimize touchscreen handling
- relax CPU latency requirements
- optimize battery even more
- built with RELR, LTO, Polly
- few other microoptimizations
- and few other stuff
- works on MIUI ports
KamiKaonashi said:
Update 26/03/2023
Download: GoogleDrive
Notes:
- Anxiety I/O scheduler as standard
- Battery focused kernel
- Stock frequencies (2GHz CPU, 650MHz GPU)
- overclocked RAM to 1.3 GHz (doesnt affect battery)
- undervolted perfectly, now no random reboots anymore for those 3-4 people that had it lol
- tested on some A11, A12 and A13 roms, worked fine
- compiled using latest Neutron Clang 17
- added Boeffla Wakelock Blocker with mido specific wakelock blocks preconfigured
- added K-Lapse into kernel
- added K-profiles, set performance as standard
- deleted obsolete GPU governors
- fine tuned CPU boost
- reduced different kernel log spams
- optimized memory handling
- optimized fingerprint unlock, for faster unlocking
- faster charging when under 90% battery
- optimize thermals
- optimize touchscreen handling
- relax CPU latency requirements
- optimize battery even more
- built with RELR, LTO, Polly
- few other microoptimizations
- and few other stuff
- works on MIUI ports
Click to expand...
Click to collapse
waiting for FF kernel update too
BigDaddyUnique said:
waiting for FF kernel update too
Click to expand...
Click to collapse
Will be updated tomorrow, havent had time to merge