Related
Heres the dealio- I have a Charge I want to root and put a custom rom on. I have done this before, with my Inc and my Archos tablet so I'm not a complete idiot.
I did use Odin and thought everything went fine, followed directions to install a zip from the card but the recovery menu never gave me that option. I am unable to get to the sdcard from the recovery menu. I got the option to install the update.zip but thats all. (I followed one of the many thousand "how to root your charge" threads)
Can someone tell me what happened?
Also, the first time I tried to do it, I realized I didn't have the right file, so I pulled the plug on my Charge while in Odin, also because it kept looping. Now Windows XP on that machine won't recognize the phone anymore.
Anyone have any ideas on that?
One more, I read that you need to downgrade the EE4 in order to root? Is that why recovery didn't work the first time, because I have the EE4? (I did see that info AFTER I installed the recovery)
I've been over these threads hundreds of times but I just don't have alot of time and there is alot of redundant information that makes it hard to get anywhere so I'd appreciate if someone could help me out.
willowave said:
Heres the dealio- I have a Charge I want to root and put a custom rom on. I have done this before, with my Inc and my Archos tablet so I'm not a complete idiot.
I did use Odin and thought everything went fine, followed directions to install a zip from the card but the recovery menu never gave me that option. I am unable to get to the sdcard from the recovery menu. I got the option to install the update.zip but thats all. (I followed one of the many thousand "how to root your charge" threads)
Can someone tell me what happened?
Also, the first time I tried to do it, I realized I didn't have the right file, so I pulled the plug on my Charge while in Odin, also because it kept looping. Now Windows XP on that machine won't recognize the phone anymore.
Anyone have any ideas on that?
One more, I read that you need to downgrade the EE4 in order to root? Is that why recovery didn't work the first time, because I have the EE4? (I did see that info AFTER I installed the recovery)
I've been over these threads hundreds of times but I just don't have alot of time and there is alot of redundant information that makes it hard to get anywhere so I'd appreciate if someone could help me out.
Click to expand...
Click to collapse
1) don't choose the option to select 'update.zip', that option doesn't work on the Charge... also it sounds like you were in the stock recover, you do flashing/wiping in ClockWorkMod recovery (CWM)
2) NEVER pull the cord out during an Odin flash unless its been like 30+ minutes and it looks like it froze or nothings happening, this is probably why your phone can't be recognized now (that is a good way to brick your phone and it sounds like you've got one)... now you will need to get the phone into download mode (if it still will) and flash the stock EE4 rom with the Charge PIT file (can't link from phone but these are in the How To Fix Your Phone sticky in Development) and start over
3) I don't quite understand your last question but no you don't need to be on EE4 to root and you can put CWM on any rom with Odin, EE4 at this point is mostly a 'return to stock' rom
blazing through on my 4G Droid Charge
The phone seems to be working fine, but maybe that is why I was in stock recovery mode, because it looks fine, but won't download now. Because I just tried to install a rom and I get an error. I had tried to install CWM, and thought thats what I was going to when I ended up in the stock recovery. I will try the Charge PIT file that you mentioned and see if that fixes anything, and then start over from there. If not I may be returning the phone since it's fairly new.
Thanks for your time
willowave said:
The phone seems to be working fine, but maybe that is why I was in stock recovery mode, because it looks fine, but won't download now. Because I just tried to install a rom and I get an error. I had tried to install CWM, and thought thats what I was going to when I ended up in the stock recovery. I will try the Charge PIT file that you mentioned and see if that fixes anything, and then start over from there. If not I may be returning the phone since it's fairly new.
Thanks for your time
Click to expand...
Click to collapse
when using the pit file be sure to have the repartition box checked in Odin
blazing through on my 4G Droid Charge
I don't have a PIT option on my Odin, or a repartition. It's version 4.13...is there a better version of Odin to work with and stick with? I'm working with 3 different computers here, so I know I have an Odin at home that was working but this one doesn't seem to connect. It's easier to troubleshoot whats going wrong if the proggies I'm using are at least a consistent version number. I DO know I had PIT on the Odin at home but version I'm using (at work) doesn't have it.
willowave said:
I don't have a PIT option on my Odin, or a repartition. It's version 4.13...is there a better version of Odin to work with and stick with? I'm working with 3 different computers here, so I know I have an Odin at home that was working but this one doesn't seem to connect. It's easier to troubleshoot whats going wrong if the proggies I'm using are at least a consistent version number. I DO know I had PIT on the Odin at home but version I'm using (at work) doesn't have it.
Click to expand...
Click to collapse
You need Odin3 1.82 (not just plain Odin). You can get it from http://forum.xda-developers.com/showthread.php?t=1160580
Thanks for the help guys. I got everything back to normal. Drivers and sdcard working properly now. Rooted. Now I just need to get Clockwork back on, and a different rom. Anyone have any fav roms so far? Would love some input on what everyone sees with the different radio builds.
If anyone can answer this, can we get mobile hotspot working on this? Thats a big part of why I need to root and rom this thing.
willowave said:
Thanks for the help guys. I got everything back to normal. Drivers and sdcard working properly now. Rooted. Now I just need to get Clockwork back on, and a different rom. Anyone have any fav roms so far? Would love some input on what everyone sees with the different radio builds.
If anyone can answer this, can we get mobile hotspot working on this? Thats a big part of why I need to root and rom this thing.
Click to expand...
Click to collapse
Everyone will have an opinion on ROM's and radios. My setup is in my sig. As for hotspot, android-wifi-tether works fine on all rooted roms. I've found 3.0pre12 to work the best. 3.1beta6 requires a reboot to get wifi working normally after tethering, but I don't have that issue on 3.0pre12. Be sure to immediately reboot after you install it, and then go in and set your phone type to Samsung Fascinate, and you should be good to go.
bought sidekick sght839 from friend and it worked fine b4 doing reset. now, when it starts, the tutorial comes up on home screen and can`t press arrow to proceed to next page. firmware 2.2.1-kernal 2.6.32.9-build froyo uvkj2. the wireless works and connects to internet fine. can`t use phone as 456 keys dont work and worked b4. can change settings OK. have rooted it. still doesnt want to work as b4. am new here so if someone could let me know if they have any ideas, I would appreciate it. am also new to android phones. I cant find heimdall file to download. Know how to set phone to download and use Odin but cant find proper files online.
Use the search bar on XDA to search for the kj2 stock Odin files, follow the directions given closely, download them, make sure you have the correct drivers so that Odin recognizes your phone, then boot into download mode using the method found in the forums, just do a quick search for download mode. You should have everything operational after download from Odin is finished, hope this helps
Sent from my SGH-T839 using XDA App
trouble installing odin
I have tried numerous times to install Odin but all I get is unregistered device...that is as far as it goes. Dont know how to get around that. 456 keys also work then dont work otherwise the phone works fine as far as internet and making calls goes. Crazy device!
Try this:
http://forum.xda-developers.com/showthread.php?t=1350060&highlight=heimdall
I soft-bricked my phone and this was the only method that worked.
if you havent reflashed your firmware yet, i have a suggestion. install clockworkmod recovery. there is a thread in the sk4g development section of this website. the title is something like cwm for the sk4g. enjoy! so look for that and follow the instructions in the first post of that thread. make sure you grab the update.zip file from that thread and do not flash cwm through rom manager. trust me on this. after you have followed the instructions in that thread, boot into cwm (boot into stock recovery and select reinstall packages. you should then boot into cwm recovery), select advanced, and then select fix permissions. when it finishes, it will say done. reboot your device and see if any of the problems have been fixed. i did this and it stopped my phone from randomly rebooting every 15 to 30 minutes. it might fix the problems on your device. if not, i would move to the next step, reflashing the firmware. flash the kj2 build and then learn how to remove bloatware. kj2 is less buggy to start with. still buggy, but less buggy than KD1, KG2, or the other version (KI2?). if you reflash firmware, you will need to re-root in order to remove bloatware. removing bloatware is key for optimal performance with the stock firmware. you can also flash a custom rom if you wish. most of the custom roms on this site have minimal bloatware, so if you wish to go that route, bloatware shouldnt be much of an issue. i personally am on the stock firmware and dont suggest flashing roms for someone so new to android. but if you feel confident enough, thats your decision. i also suggest booting into cwm and running fix permissions after removing bloatware. i theorize that removing system apps causes permissions errors similar to registry errors in windows.
some success with sk4g
don`t know how or why but I got frustrated with the phone and threw it in the trash on top of coffee grounds...changed my mind and pulled it out and cleaned it and charged it and...voila...it worked. banged it against the sink a couple times. weird! so, now I am trying to install custom rom and keep running into everification error when I try to flash. 456 buttons still dont work and cant take a video with it but it will probably work better if I can find a work-around for these errors I get. I am on a mission now and I cant give up. Hope someone can help me. I think there may be hope for this thing. Thanks for whatever help I can get.
i told you, install clockworkmod and fix permissions. it will probably fix the problems you are having. if you choose not to listen, thats. your choice. but my advice will probably help you without having to through the pain in the rear of reflashing the firmware. reflashing the firmware itself isnt really that difficult, but once you do it, your back to square one with your device. starting from scratch is the frustrating part. i bricked my phone and had to reflash, and it took me a couple weeks to get the phone where i needed it again. im staying on the stock firmware for this reason.
how does one fix permissions
OK OK dont yell. How do I fix permissions? Newbie on board here so I need a little more help than the rest. I dont necessarily want to do the rom thing myself. Thanks.
copy and paste this into your browser: forum.xda-developers.com/showthread.php?t=1124453 and follow the instructions in the first post. after you have followed those instructions, boot into recovery mode. the stock recovery will apear. scroll down and select reinstall packages. the clockworkmod recovery should boot up. the text in the screen will be orange. scroll down and select advanced. scroll down again and select fix permissions. when it finishes, it will say done. reboot your device and see if you have any of the issues you were having. i am not guaranteeing this will fix the issues, but i think it might. if it doesnt, my next suggestion will be reflashing the stock firmware. but try this and post back when finished and let me know if it works.
sk4g problem
didnt work. did exactly what you said and no go. any other suggestions. it works so well for some things like wifi and calling except 456 buttons on and off. it is funky indeed. thanks for the help also, cant take video or manage photo or use front camera as the left side button to choose options doesnt work either. seems like something is up with the rom. cant install anything from samsung or tmobile as it is an unregistered phone.
were you able to boot into clockworkmod recovery?
boot up
yes I did.
then you need to reflash your firmware. you need odin, you need the samsung vibrant drivers, and you need the firmware files. do a search on odin in the dev thread for this device and you should be able to find everything you need, including instructions.
Have tried that too
have the drivers, have odin and have tried that too. that didnt work as the phone is unregistered and not recognized. it is used and I cant register it.
on your phone, go to settings>about phone and scroll down to where it says baseband version. the last 3 characters under that will say either kd1, kg2, or kj2. if its not kj2, then i have a suggestion for you. but post back and lmk.
phone setting
it is kj2. now what? this is all confusing as it has been updated I believe by previous owner. thanks for your time. i am going to try the odin method again. i first did it on a 64bit puter with windows 7 so i can try it on my 32bit machine. have read that sometimes odin doesnt work well on 64bit. am willing to try anything. will let you know. thanks again. cant get the stock rom download anywhere. will just try flashing custom rom.
you cant odin a custom rom unless the dev makes an odin file, which they usually dont. you have to flash through clockworkmod. you can head over to the dev section and pick from many roms that are listed. follow the developers instructions for flashing very carefully or you will brick your device.
Thanks for advice.
I know I can`t odin a custom rom. I can`t seem to odin anything on this machine. I have cwm and have tried using it to flash a rom but I keep getting everification and such error msgs. Gonna let it sit for awhile and think about this. I have the update.zip file on sdcard but can`t seem to get that to install no matter what I do. Very puzzling deal. Thanks anyway for your help.
do you have android sdk installed on your computer? google it and install it, then try odin again.
got sdk
sdk installed and will try odin again...seems a little more complicated than the last time I tried...will google a bit more on this. Thanks.
Hey Guys,
ive been looking all over for a solution cant find anything.
I'm fairly new to this.. I have this prism 2 i have been messing around on. anyways i tried flashing stock rom and completely messed it up.i dont know what is wrong. the phone wont boot at all. ive lost recovery.
the phone is rooted and bootloader unlocked. i got the unlock code from huawei.
also when i connect the phone to my laptop. i get 2 devices named linux Files-cd gadget
i was going to just repartion the whole phone and reinstall everything.
but when i try and repartion i get an error saying /dev not found
if there is any else you need me to post let me know
also if this is in the wrong area i apologize.
Thanks
a pity for all phones compared to computers is that they don't have bios or similar, so when it's broken the rom firmware also flash fail is very difficult to fix especially for self tinker like me.
This should work on all Qualcomm Snapdragon based Samsung galaxy SIII's, if it doesn't, PM me the model and I'll try and find a solution.
WHILE THIS IS VERY LIKELY TO WORK FOR ANY BOOTLOADER/MODEM/FIRMWARE BRICKED PHONE, THERE IS NO UNCONDITIONAL GUARANTEE THAT THIS WILL WORK FOR YOUR PARTICULAR SITUATION, THERE IS A POSSIBILITY THAT THERE ARE SOME BRICK STATES THAT THIS WILL NOT WORK FOR, but in my experience, almost all cases can be resolved by rewriting the sdcard with correct partitioning.
Disclaimer out of the way, let us begin.
Needed Materials and Files:
EDIT: if you have another phone or know someone else with the same phone have them run this and the output will be a debrick image you can use: busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=200 if it does not work then change the last number (count=) to something larger and try it. If you create an image please upload it so I can put it into a repository I'm creating
16GB or 32GB class10 microSD card
A hard bricked Samsung galaxy S3 US Cellular
The debrick image for your device:
[[Here is the drive image for a folder containing all the debrick images that I currently have uploaded, more will be coming: https://drive.google.com/folderview?id=0B612qYHFMILfWUlMTTEwdUstcXM&usp=sharing ]]
If you have any images that I missed, please send me a link or, better yet, upload them to drive, make them publicly shared, and share them with me at [email protected], I will put them in this folder for all to use
US Cellular R530: ftp://sdbruington.us/d2usc/SCH-R530_ALIVE_MJA_200MB_16GB.bin
Sprint L710: http://www.mediafire.com/download/23...ph_l710.img.xz
AT&T I747: http://d-h.st/iEy
T-mobile T999: http://www.mediafire.com/download/gr...k_SGH-T999.img
---I did not upload these images, I have simply collected the links over time, please thank Cnexus for his help in finding these and
---helping me to originally unbrick my S3
Your computer
A card reader that will accept the card (another phone will not work as this is an image, and it needs to repartition the SD card)
Either a partition editor (I've heard that you can use dd or something on linux, but I haven't tried) or this: View attachment win32diskimager-v0.9-binary.zip
A wall charger (computer charging isn't as reliable)
Procedure:
1. Take the sdcard and insert it into your computer
2. Download the mentioned image and the software to put it onto the sdcard
3. Use your computer to pull the data already on the card onto your computer hard drive, as the sdcard will be wiped when the image is put onto it
4. use the software that you downloaded earlier to burn the image to the sdcard
5. Remove the battery from the SGS3
6. insert the sdcard into the S3
7. Put the battery into the S3
8. The S3 may boot automatically, or you may have to manually boot it by holding down the power button for 5< seconds
9. If the update that bricked your phone also messed up /system, then you'll have to coerce Odin mode to shove a stock firmware image to your phone, though I've had more than just SOME trouble with that in the past (in other words I haven't been able to get back to stock yet...), if you simply had a radio update or something go wrong, then proceed to the next step.
10. Do a victory dance with your phone in your pocket not the repair bench, or on second thought, make sure you don't drop it, don't create another problem.
11. After that, you can just use your device normally with the sdcard in it without worry of bricking it, though it will not be able to boot if you remove the sdcard;
the only known method of getting it to boot without the sdcard is reflashing stock firmware, which completely wipes the phone and resets everything back to complete stock. Also, Odin mode has, at least for me, objected when I've tried to flash the stock image back onto it, and even if Odin mode was sure of working, backing up ~16GB of data isn't a fast process, especially with the most reliable means being ADB. If you try to flash a stock image and it fails, your device will almost definitely come up with a version of dmode when you try to turn it on with the sdcard (still bricked otherwise) that says something about Kies update failure, the only way of correcting this that I've had success with is flashing an image that won't do much, such as the same recovery that you already had, over odin mode from that special dmode, as while that won't correct the actual brick, it will at least make you able to boot from the sdcard again. I will provide links to the stock images in a little while, once someone gets that far, as I will have to find all but the one from the US Cellular version.
I am currently looking for firmware images that will only flash the bootloader/modem, if anyone knows of an odin file that could do that, please let me know as soon as possible, in the meantime, I will try and create an update.zip that will flash the necessary files; as most bricks are likely cause by an update.zip that was meant for a different device, I am very confident that it can be fixed with another .zip file.---Stay tuned!
---Don't forget, that thanks button won't bite your finger off if you push it:fingers-crossed:
If any of the links are not fully functional, PM me to let me know, and if you have the link to another debrick image for another device, send me the link so I can include it here!
Please note: While there is a similar procedure for Xynos based S3's, they apparently require a physical modification that requires an amount of soldering, so it is most likely best for them to simply take them in for Jtagging and then just not brick them after that.
EDIT: here is the link to a full youtube tutorial that I made, just for those of you who like watching a video instead of getting lost in a written guide https://www.youtube.com/watch?v=-RTAbLBVfMI
EDIT AGAIN: I'm sorry about both of the mediafire links being down, I will try and find some more and upload them to my google drive, along with the others just to make sure they exist somewhere safe.I'm downloading the images now and uploading some that I already have, they will be available in this folder (https://drive.google.com/folderview?id=0B612qYHFMILfWUlMTTEwdUstcXM&usp=sharing) on google drive and will be available by email upon request
here is a sprint image that should work, sorry I haven't tested it http://www.mediafire.com/download/231uhy6l80jx74n/debrick_sph_l710.img.xz
for the t999 4.1: https://www.copy.com/s/xSAswQZbhQX8/t999_debrick.zip for the t999 4.3: https://www.copy.com/s/7ICfKXMC3ccr/T999_4.3_debrick.zip
I know this is becoming a mess of links but here is a link to an xda post that has t999 variant images http://forum.xda-developers.com/showthread.php?t=2439367
here is a sprint 4.4 debrick image: http://www.androidfilehost.com/?fid=23329332407591176
If you want to get your phone to operate without an sd card in there for every boot, stay tuned, I'll have a guide to return to stock soon, though a quick google search shouldn't be that hard if you're desperate
I will clean up this guide in a little bit but currently I have school and such to attend to so it may not be immediate
I know this is getting unwieldy but (big thanks to youdoofus) I have a way to completely debrick and fix it so it doesn't require even the sd to boot.
"Restoring stock bootloader
1) You were able to boot into the ROM
2) Plug your phone into a computer and use MTP mode
3) Move the debrick file onto your internal sdcard (/sdcard/debrick.bin)
4) Disconnect your phone
5) Open up a Terminal Emulator on your phone and input this code
Code:
su
dd if=/sdcard/debrick.bin of=/dev/block/mmcblk0
6) Reboot"
Of course this should be modified for the different versions and types of debrick image as some are img, some are bin, I think there might even be an ISO hanging around somewhere
EDIT: As of October 10th I'm working on a tool that will get an image directly from a stock rom/tar and put it on the SDcard. This is pretty complex so it will probably take a little while, but it should make it easier to get images if all that's required is a stock tar.
I've followed all these guides and haven't had any luck. I did use a CM 4.4 rom and some people are saying i need a debrick.img of a 4.4 to get it working again. i'm on an i-747. can you help?
derget1212 said:
I've followed all these guides and haven't had any luck. I did use a CM 4.4 rom and some people are saying i need a debrick.img of a 4.4 to get it working again. i'm on an i-747. can you help?
Click to expand...
Click to collapse
You don't need a debrick.img of a 4.4 to get it working, you need a debrick.img of the correct bootloader. If you bricked your phone by flashing an older bootloader after upgrading to the 4.3 bootloader, then you need a debrick.img with the 4.3 bootloader.
polobunny said:
You don't need a debrick.img of a 4.4 to get it working, you need a debrick.img of the correct bootloader. If you bricked your phone by flashing an older bootloader after upgrading to the 4.3 bootloader, then you need a debrick.img with the 4.3 bootloader.
Click to expand...
Click to collapse
how do i find out the correct bootloader? i was using this rom http://forum.xda-developers.com/showthread.php?t=2518998 for a couple months and randomly got hard bricked yesterday. any help is greatly appreciated.
Thanks for sharing this
derget1212 said:
how do i find out the correct bootloader? i was using this rom http://forum.xda-developers.com/showthread.php?t=2518998 for a couple months and randomly got hard bricked yesterday. any help is greatly appreciated.
Click to expand...
Click to collapse
Explain your situation. Randomly bricked is very vague. Did you flash anything? Do you remember doing anything? It's important. Phones don't go and "randomly brick" unless of a HW problem, and to either confirm or eliminate that possibility we need more details.
polobunny said:
Explain your situation. Randomly bricked is very vague. Did you flash anything? Do you remember doing anything? It's important. Phones don't go and "randomly brick" unless of a HW problem, and to either confirm or eliminate that possibility we need more details.
Click to expand...
Click to collapse
Like i said, it was totally random. My phone froze and rebooted yesterday. It got to the Samsung logo so i thought everything was okay. I fell asleep and woke up to a bricked phone. After all of my attempts, I got one debrick.img to show something on my screen and it shows "BOOT RECOVERY MODE". Odin sees my phone and tries to fix the PIT and the Bootloader but it always fails. From what i gather, it seems to be a hardware issue.
derget1212 said:
Like i said, it was totally random. My phone froze and rebooted yesterday. It got to the Samsung logo so i thought everything was okay. I fell asleep and woke up to a bricked phone. After all of my attempts, I got one debrick.img to show something on my screen and it shows "BOOT RECOVERY MODE". Odin sees my phone and tries to fix the PIT and the Bootloader but it always fails. From what i gather, it seems to be a hardware issue.
Click to expand...
Click to collapse
Whoa whoa there, if your phone still boots in either recovery or download mode, then you don't need to use a debrick.img.
If you have a custom recovery, you can flash your custom rom. If you don't, you can flash a stock ROM using ODIN in download mode.
polobunny said:
Whoa whoa there, if your phone still boots in either recovery or download mode, then you don't need to use a debrick.img.
If you have a custom recovery, you can flash your custom rom. If you don't, you can flash a stock ROM using ODIN in download mode.
Click to expand...
Click to collapse
It is hard bricked. Without the sd with a debrick.img installed, I get no response at all. And I've tried all the i747 debrick.img files I could find here with no success.
I can get to boot recovery mode with one .img I could find but boot recovery os different than recovery mode. It's essentially useless and Odin doesn't like it.
derget1212 said:
Like i said, it was totally random. My phone froze and rebooted yesterday. It got to the Samsung logo so i thought everything was okay. I fell asleep and woke up to a bricked phone. After all of my attempts, I got one debrick.img to show something on my screen and it shows "BOOT RECOVERY MODE". Odin sees my phone and tries to fix the PIT and the Bootloader but it always fails. From what i gather, it seems to be a hardware issue.
Click to expand...
Click to collapse
It really sounds a lot like the BRICKBUG to me, anyone know how to tell if a chip is insane without it working? And did you have the 4.3 bootloader? If you got that you should have been safe, but if you didn't then the kernel may have burned out the chips from the "bug" (it really doesn't seem too much like a "bug", more like an issue worthy of recall)
Sorry I don't know exactly what's wrong off the top of my head
derget1212 said:
It is hard bricked. Without the sd with a debrick.img installed, I get no response at all. And I've tried all the i747 debrick.img files I could find here with no success.
I can get to boot recovery mode with one .img I could find but boot recovery os different than recovery mode. It's essentially useless and Odin doesn't like it.
Click to expand...
Click to collapse
If you get ANY response at all, then the debrick image is doing its job; what you need is a stock image, I'll try to find a link for you to use. Try using Kies or something, alternatively, as if you have the serial number you can apparently flash it quite cleanly, all data on the phone will be lost though, as it effectively wipes the eMMC.
polobunny said:
You don't need a debrick.img of a 4.4 to get it working, you need a debrick.img of the correct bootloader. If you bricked your phone by flashing an older bootloader after upgrading to the 4.3 bootloader, then you need a debrick.img with the 4.3 bootloader.
Click to expand...
Click to collapse
Exactly
This image gets you in the clear if the ONLY thing screwed up is the boot partition, meaning modem/firmware/bootloader, it does NOT get you fixed if you got your rom F***ed up, and do not expect it to, this will get you into dmode so you can use odin or something like fastboot to flash a /system image or a FULL stock rom if you want to get your bootloader fixed without the SD card being in all the time.
dreamwave said:
If you get ANY response at all, then the debrick image is doing its job; what you need is a stock image, I'll try to find a link for you to use. Try using Kies or something, alternatively, as if you have the serial number you can apparently flash it quite cleanly, all data on the phone will be lost though, as it effectively wipes the eMMC.
Click to expand...
Click to collapse
if anyone can find the correct debrick.img i need to use, i would greatly appreciate it. I have tried Kies and Odin without success. They can see the phone but seem not to be able to access it. I can't flash anything via odin or get to the CWM recovery or download mode. this is a really weird screen i haven't seen before.
derget1212 said:
if anyone can find the correct debrick.img i need to use, i would greatly appreciate it. I have tried Kies and Odin without success. They can see the phone but seem not to be able to access it. I can't flash anything via odin or get to the CWM recovery or download mode. this is a really weird screen i haven't seen before.
Click to expand...
Click to collapse
Is there any way at all to get into dmode? What is windows recognizing it as?
Thanks for sharing.
EvangelineX said:
Thanks for sharing.
Click to expand...
Click to collapse
no problem, I hope it helped!
derget1212 said:
I've followed all these guides and haven't had any luck. I did use a CM 4.4 rom and some people are saying i need a debrick.img of a 4.4 to get it working again. i'm on an i-747. can you help?
Click to expand...
Click to collapse
If you bricked the /system partition AND the boot partition you will need a stock rom as well, just use Odin or something if possible after using a 4.3 image, a 4.4 image is more or less the same as a 4.3 as far as I know, I mean I bricked mine after using cm11 by flashing the wrong rom, it's just that the rom you tried tried to flash a 4.1 bootloader, and thus tripped the eFUSE or something in the Knox bootloader, what you need is a 4.3 unbrick image, as 4.4 didn't really change the modems/bootloader from 4.3, and the unbrick image isn't really that much more than a collection of pieces from the boot partition that are used as an autoboot by the phone when the eMMC fails to load properly.
This is pretty neat..
does it always work?
It's nice to have such a recover method whenever something like this happens to you.
halfdead1993 said:
This is pretty neat..
does it always work?
It's nice to have such a recover method whenever something like this happens to you.
Click to expand...
Click to collapse
I believe it will work on basically anything, as in I haven't seen a case that can't be cured at least somewhat by this, I think it works like an alternative boot, as if the bootloader on the eMMC is corrupted, it seems to remove the boot flag, thus making it so that the phone does not detect a bootable partition, the unbrick image has a partition layout mirroring the one that is supposed to be on the phone, so it is used as the boot partition but then redirects control back to whatever is on the eMMC after the bootloader, think of it as a liveCD on windows, just one that hands control back to the system after it has gotten past booting the BIOS.
So following the instructions here I rooted my LG Tribute 5 when I got it with Kingroot. And everything was fine for months. Until System Updates started to pop up regularly but I could never get them to install(they would error out). After a quick search I learned the updates won't install cuz the device was rooted. And a quick unroot would get the install to work.
I just unrooted through the kingroot app and started the updated. Before, when I tried the update it would error out about a quarter of the way through. This time the bar made it all the way to the end and then error'd out. I didn't think much of it. So since the device was stuck I took my battery out and back in. The device went through the boot process, then a No Command error popped up. Never saw that before.
So I tinkered with it a bit and kept getting the error. So I got into the Recovery Menu to do a full wipe and factory reset. I did that, but the No Command still popped up.
I know I can put a custom rom file on my external sd card and install that through recovery, right? The thing is I would like to install Slimrom, but there are a ton of downloads on the sites download page. So I'm asking for a little help on directions on a slimrom that will work on the LG Tribute 5.
And if there isn't a custom rom that works with a tribute 5,can I get a recommendation of one a custom rom that does? I'm into lightweight and minimalistic. By the way, I didn't have a custom rom on my phone, just had it rooted.
Thank you so much in advance for any and all help
No-one has any advice for me?
A little more info, the phone was on Android 5.1.1 before it started erroring out.
No-one has any advice for me?
A little more info, the phone was on Android 5.1.1 before it started erroring out.
Do you have a custom recovery as well? If it is only the stock recovery, which blocks most zips, your very option may be to use LG UP and the stock dz file and return the device to stock. The process to update can be done from that point.
I'm pretty sure I only have the stock recovery. I knew i should have installed TWRP...
So just search for LG UP and the stock firmware and they should be easily accessible?
Thanks for the reply xanscorp.
https://drive.google.com/folderview?id=0B0KV4b0_G1PQZW95ZmloejU5dFk
The LG UP program and .dz file are in there.
That's awesome! Thank you very much for linking the files for me.
I'm gonna do this in a couple hours when I get home and I'll let you know how it went.
Much appreciated xanscorp
One last stupid question... Just the LG Up and.dz files are the only two I need right?
I'm guessing so, but just wanna be sure.
Yes. It'll put you back to stock.
Unfortunately I haven't yet found how to get the ZV5 firmware fully rooted (i.e. a custom recovery) but it can be partially rooted with KingRoot. (http://www.kingroot.net/wap)
I just finally got around to giving this a shot. Sheesh....
Anyways I downloaded the files, put them on my external SD card, popped my SD card into my phone, then booted my phone to recovery. I went to install update from SD, and the phone didn't find any files. Hmmm....
I'm definitely doing something wrong. The .msi file looks like an executable. So I hopped onto Windows to install it. It installed, but when I run the program it can't find my phone when I plug it in.
I'm about to just give up, trash this thing, switch to a different provider and get another new phone. This time I won't mess with Kingroot. I'm pretty positive that's the app that screwed things up. I've had three different phones, rooted all three through different methods, and never had a problem.
Things files are to restore from a pc using LG Up for Windows... that's why it's a Microsoft Installer (.msi) file.
Yeah I figured that. But when I plug my phone into the computer my phone isn't recognized. I'm assuming because it boots straight to a No Command screen.
So since the computer doesn't recognize it neither does LG Up. Any trick to get around this?
Still haven't gotten this phone back to working. This is the first time I've really been stumped after a brick.
Please...anymore help?
Sent from my KFFOWI using Tapatalk
You find annything cause my same phone did the same thing
Sure haven't bud.
I've tried the help in the thread with no success