Database Info

[Q] how do i bring back root on my i9023 ics 4.0.4

I have just updated my nexus s to the latest 4.0.4 update..now i want to bring back root access .. as we all know were going to loose root access if we updated. anyway i previously used this method http://nexusshacks.com/nexus-s-root/how-to-root-nexus-s-or-nexus-s-4g-on-ics-or-gingerbread/ now im wondering if this also applies to 4.0.4 update and what is the best recovery to flash on this update?

The only thing i did was upgrade to 4.04, dont reboot but flash superuser, all clear, root is back.

[Q](solved) how do i bring back root on my i9023 ics 4.0.4
willemt158 said:
The only thing i did was upgrade to 4.04, dont reboot but flash superuser, all clear, root is back.
Click to expand...
Click to collapse
hmn... what i did was
i went to adb
open cmd
flashed recovery3101.img
after that i installed superuser using CWM recovery . if your using the stock recovery it will only show an error msg. didnt wipe anything ... all is ok and well hehehe cheers!

I have issue with CWM and Root. I've follow the guide here.
I manage to successfully do up to step 4 without error. After that, when I reboot the device, it have a message "android installing update". I installed titanium backup and it says no root access. Superuser is available. When I tried to update on Play "Update for Superuser could not be downloaded due to an error (941)"
I tried to go back to recovery, it is the stock recovery instead of CWM. I've updated my 9023 from 4.0.3 (stock non root) to 4.0.4 using CWM. I've installed superuser using CWM as well. But when I reboot the device, it went back to stock recovery. I've tried fastboot CWM, turn off, then turn back on to go recovery, it is using CWM. But when I reboot, and try to go back to recovery, it goes to the stock recovery.
Appreciate some help. Hope my explanation is clear.
Will

First try flashing the latest Superuser than reboot, then open rootexplorer
Rename "/system/etc/install-recovery.sh" to "/system/etc/install-recovery.sh.bak".
All Stock ROMs replace the recovery on each Boot if it isn't the stock one. Renaming this script stops that. After you do this, flash CWM one more time and it'll stick.
Thanks to harbb who helped me with the same isseu

not sure if this is legit... I found a few sites with the same tutorial but different backup apps same file download though... can anyone varify?
filename: Superuser-3.0.7-efghi-signed, from a mediafire download (/?57iroxlzh8bb5qi)
from tutorial: Root Nexus S with Android 4.0.4 ICS IMM76 Firmware, from androidlot.com
(sorry can't post link)
it just said to do a recovery from bootloader, no other tampering needed... was thinking of using it if it worked as I just did the Nexus S 19023 OTA update 2.3.6 - 4.0.4 found on this forum but wanted to root to use voodoo sound... first timer and dont want to mess around with roms or cwm... figure no harm rooting as Nexus S probably won't get anymore official updates

Signature verification failed
well i have tried to install the superuser from recovery (apply update from SDcard) but every time i try to install the zip file it gives me signature verification error .

Mansuur said:
well i have tried to install the superuser from recovery (apply update from SDcard) but every time i try to install the zip file it gives me signature verification error .
Click to expand...
Click to collapse
That means your not in CWM Recovery. You have to follow the guide and use fastboot to flash a custom recover. Thats why we use a custom recovery, to bypass the signiture check

so wats da final result?
in ics 4.04 how to flash cwm and root and install vodoo?

ended up using m.sabra's one click root and flash cwm tool (/showthread.php?t=1544940) worked a charm, downloaded voodoo sound plus so i didnt have to flash new kernel, putting music back on phone now (had to unlock bootloader) to see how it sounds
also used appbackup&restore, copied backup folder from sd to computer, used the root tool, redownloded appbackup&restore, copied folder back from computer to phone, allowed install from non market, reinstalled all apps
now have superuser and cwm and all my apps back

Hope this may help. it's the way a did it on my Nexus S
Download fastboot for Windows or Mac.
Make sure you have the Android SDK installed.
Download ClockworkMod Recovery.
Download the Rooted Su Binary for 4.0.4
Make sure you have the necessary drivers installed for your device
Put your device into Bootloader Mode (turn your device off, then hold Volume Up + Power).
Once in Bootloader Mode, type the following into your Command Window
fastboot oem unlock
You should now see a couple of lines go through on your Window.
Then Type the following:
fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img
Provided this went correctly (it should), you now want to cycle down to “Recovery” on your device using the Volume buttons and press Power to confirm. This should boot you into ClockworkMod.
Select Recovery again, navigate to “Mounts & Storage” and then to “Mount USB Storage”. Once this has been done, your SD Card should appear on your PC.
Copy the Rooted Su Binary you have downloaded to your SD Card, and then Unmount USB Storage on your device.
Navigate back to the main menu of ClockworkMod and select “Install zip from sdcard”, then “Choose zip from sdcard” and select the package you just copied across, and then confirm the installation. This should install the package and root your device.

Hey guys sorry i was on vacation, thats why it took me so long time to come back, anyways... here is the link of the step by step procedure on rooting your nexus s, this is what i followed, http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
but what i did was ;
1. after updating i lost root
2. open adb tool
3. flash new recovery3101.img ( this is to replace default recovery from the stock ics 4.0.4)
4.then installed superuser from the new recovery that i installed ( CWM)
i wont go through all the details since , the link already explained that there....so cheers and hope this works for you , all the needed files is in the link also.

Mrbalders said:
Hope this may help. it's the way a did it on my Nexus S
Download fastboot for Windows or Mac.
Make sure you have the Android SDK installed.
Download ClockworkMod Recovery.
Download the Rooted Su Binary for 4.0.4
Make sure you have the necessary drivers installed for your device
Put your device into Bootloader Mode (turn your device off, then hold Volume Up + Power).
Once in Bootloader Mode, type the following into your Command Window
fastboot oem unlock
You should now see a couple of lines go through on your Window.
Then Type the following:
fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img
Provided this went correctly (it should), you now want to cycle down to “Recovery” on your device using the Volume buttons and press Power to confirm. This should boot you into ClockworkMod.
Select Recovery again, navigate to “Mounts & Storage” and then to “Mount USB Storage”. Once this has been done, your SD Card should appear on your PC.
Copy the Rooted Su Binary you have downloaded to your SD Card, and then Unmount USB Storage on your device.
Navigate back to the main menu of ClockworkMod and select “Install zip from sdcard”, then “Choose zip from sdcard” and select the package you just copied across, and then confirm the installation. This should install the package and root your device.
Click to expand...
Click to collapse
wow very detailed cheers man!

Glad to help, and hope you've got your Nexus back to root

KARBONN TITANIUM S20 deVLEOPmENT

HERE IS THE FIRST OFFICIAL
CWM FOR KARBONN TITANIUM S20
ORIGINAL BOOT N RECOVERY .IMG
join FB GROUP:::<ww.facebook.com/groups/323894334469784>
sTOCK ROM (SOON BE UPLOADING)
Site ::: karbonnts20.blogspot.in/
nEWBIE PROBLEM THATS WHY LINKS ARE NOT ALLOWED TO POST

Rooting KArbonn Titanium s20
#Requirements:
"I am not responsible if you brick your phone"
CWM recovery (Link)
SU & Binary files (Link)
Use SP Flasher v 5.0xx to flash (Link) .
Download the scatter file MT6582(Link)
#Procedure :
Open SP flasher and choose scatter file Mt6582_android_emmc.txt
Goto recovery link and choose the CWM recovery (downloaded).
Now connect your device in switch off Mode with its battery inside and Download it
Now open CWM by pressing Vol up+Power Key
Choose "Install zip from sd card" >Choose zip from Sd card > select the update SU.zip
Reboot and we are done rooting.
for links check the site!!

Repartition Internal SDCARD
As we know this device {MTK6582}comes with 4GB ROM with APP data to be 1GB and user Storage 1.59 GB.
Such small APP space cause a lots of problems Thus best way is to repartition it with HKRom Manager.
For links visit the site :-htp://karbonnts20.blogspot.in/
"I am not responsible if u brick your phone , dead internal sd or so n so .Better do it on your own risk"
Requisites:
Hk rom manager.apk
CWM /TPRW recovery
A full backup CWM or TPRW.
Procedure:
Before you proceed take a full CWM or TPRW backup as phone internal partition may not work or respond sometimes.
Now install the app
Open the app and select mt6582 fast runner (2nd option) ::it will be the only highlighted option .
Choose your required data size (say 2GB , its fine ) and hit apply and now wait.
It will show boot into recovery ,hit yes
After 3 mins you are done. ReBoot it
Now You have 1.8GB APP space and 540MB for storage
"Remember all your phone data will be lost as phone is re-partitioned and Formatted. "
thanks to XDA

Ways to extract stock rom
How to Extract Stock Rom {Detailed procedure with Video tutorial}
FOR LINKS PLEASE VISIT THE SITE :- []ttp://karbonnts20.blogspot.in/[/url]
"This Tutorial is applicable MTK devices "
Required :-
SP flasher- [ttp://sh.st/o9xC5[/url]
MTK Droid Tools- [tp://sh.st/o895X[/url]
Scatter file
ABD Drivers
Ways to extract stock rom:- Video Links
1.Case I:- "If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled "
Tutorial Visit:- ttp://sh.st/ocUme[/url]
2. Case II :- An Android Phone having CWM (with or without Root)
Tutorial Visit:- ttp://sh.st/ocOaC[/url]
3. Case III :- "A rooted Android phone (with or without CWM) USB Debugging Enabled"
Tutorial Visit :- ttp://sh.st/ocOBw[/url]
Thanks to XDA , and the Developers
Procedure:-
Case-I :If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled
First TURN ON the USB Debugging Option :: ie , Settings>Developer options>USB debugging and install ADB drivers
Start MTK Droid Tools <Provided above> ,Grant the USB debugging request and wait till device get discovered .
Then click on BLOCKs Map and you will get all partition and their length .Here you can create a scatter file also. and minimise the window .\, We would require the location later.
Then TURN OFF the phone . OPEN SP flasher , Choose the scatter file you made or provided in the link.
Then Goto READBACK tab and add a readback file ie ROM_0
Click on ROM_0 and choose the destination Folder .
Now a Box will open and ask for Start address and length ,SET it in hex and do the following
start address:0x0000000 and length 0x7FB80000 [The length of FAT as in scatter file] ,Remember if you want the length shown in block map then just ADD 0x [length] .
Now HIT readback. Connect the Phone using USB with battery inside the phone and wait till its get discovered and yellow bar will represent the work.
It would nearly take 30-45 mins and we got our ROM_0 file.
Again Turn ON the phone and connect with USB debugging ON.
Open Minimised MTK Droid tools and Goto Root,backup tab and Hit Process ROM_0.
It will ask to make CWM recovery from original recovery ,if u want CWM fro your phone here you can get it HIT Yes.
After Processing finished we will get our SP flashable STOCK Rom Files in mtkdroidtools>backup
Hence we are done . And In RESULT we get ,ScAtter File ,SP Flashable STOCK Rom images and CWM Recovery for the phone.
Thank You
Case II:-An Android Phone having CWM (with or without Root)
Here we get CWM Backup For Stock Rom which is good for Porting like purposes.
Keep 3 GB of space empty in SD card.
First Turn OFF the Phone and HOLD UP+ Power Key
Enter to Recovery Menu>Backup and Restore
Hit Backup
After it completes Goto SDCARD>CLOCKWORKMOD>BACKUP
Result we get CWM Backup of STOCK ROM which can be flashed By CWM on Hitting restore in Backup and Restore.
Case-III:-A rooted Android phone (with or without CWM) USB Debugging Enabled
Here we can get CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Connect the phone phone to PC via USB and turn ON the USB Debugging.Keep 3GB SDcard Space
Then start MTK Droid Tools and let it detect your Phone.
Then Hit ROOT button just at Down right.
Let it connect to phone and Grant the SU Permission in the phone.
The yellow mark in down left corner will turn Green .
Goto Root, Backup Tab and Select userdata and cache in Bacup option.
Now hit Backup. It would take and hour or so.
Then click on" prepare blocks for flash tools" and wait .
After it Finishes you have CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Mtkdroidtools>backups>"[Phone name]">!imagesfor flashtool
Hope it help You
Hit like and Share

ZTE Blade Vec 4G - Guide - Links - FAQ - Discussion

General discussion topic and Guides for the ZTE Blade Vec 4G/Orange Rono/Sosphone 4G/Turkcell T50.
Root
1. Activate Developer Options, and tick USB Debugging.
2. Install from Google Play:
-BusyBox
-RootCheckerBasic
3.Install the 2 apps in the attached archive.
4. Open the app with a chinese name. Then press the only button on the screen, after that press the round button found next to the top.
5.Open the KingUser app, who will get root permission.
6. Enter busybox and wait for the initialization to finish. Then press install and give it root permission.
7. Install SUperSU from the playstore and press Update Binaries and then Normal. If you get an error, restart the phone and try again.
8.If it finished successfully, DON'T press restart but rather Delete the data of the 3 apps installed(2 chinese and one KingUser), and uninstall them.
9. ???
10. Profit. Now you haver permanent root and SuperSU as root manager. If everything was done corectly, RootCheckerBasic should show that the phone is rooted.
Archive:
https://drive.google.com/file/d/0B9WMSJf5LSatS3JlUzMtd3FxZjQ/view?usp=sharing
TWRP Recovery
You need to be rooted to try this.
1.Download and extract the "TWRP.img" file from the attached archive. Push it to the phone in the root directory of your sdcard.
2.Install "Flashify" from the Play Store.
3.Open the program and give it root access.
4.Select the "Backup/Restore" tab, then click "Backup Current Kernel" and "Backup Current Recovery". The app will backup your kernel and your recovery and will place them in "Android/data/com.cgollner.flashify".
5.Click on the "Flash" tab, Then click on "Flash Recovery", then on "Choose File". Select the "TWRP.img" file.
6.Press on "Yup!" and wait.
7.Now we can use TWRP Recovery by powering the phone up with Volume Up and Power.
Archive:
https://drive.google.com/file/d/0B9WMSJf5LSatZ0hpLTc1UmxtNDQ/view?usp=sharing
DemonROM by me - Deodexed - Cleaned - Based on the Norway ROM - Europe only ( International version comming soon)
Here is the LINK.
https://drive.google.com/file/d/0B9WMSJf5LSatOXRTb0dkNzV4NWM/view?usp=sharing
Be sure to make a full wipe before/after flashing for an optimal experience.
Tested on Orange Rono, but it should work on any device from Europe.
Be sure to flash some zips after that:
*GAPPS https://drive.google.com/file/d/0B9WMSJf5LSatT1lTWHZRZUhpZFE/view?usp=sharing
SuperSU https://drive.google.com/file/d/0B9WMSJf5LSatV1Z6Mk5YakZaT2s/view?usp=sharing
BusyBox https://drive.google.com/file/d/0B9WMSJf5LSatWTBtT1lSenE1aDg/view?usp=sharing
* MUST be flashed.
Have fun !
My Google Drive directory, dedicated for the ZTE Blade Vec 4G development.
https://drive.google.com/folderview...MzSnJtUlJsT1FBNWhYcGJJMnZtTTAwMHc&usp=sharing
MEGA directory with all of the Stock ROMs
https://mega.co.nz/#F!i8p3yLqA!ppd_x-aMyh4sce-8fJTffA
Post here any questions that you have.

I had a problem with TWRP .after flashing with flashify .vol up and power button works to boot in recovery but stuck in a logo" win team" for 2 mins and restart my phone.. Can't access my recovery

The ROM does not contains the kernel or i don't see it lol, great job anyway :good:

My Wifi Doesn't working but it was a good rom !

[Recovery][Root] VK World VK6735

Note this is not my work it comes from Fish on the MDForum Russia
This TWRP is currently in a mixture of Russian and English.
Do this at your own risk I take no responsibility for damage to your device or lost data.
To root VK6735 first install TWRP Recovery
Download https://onedrive.live.com/redir?resid=4FA54FB21684BE14!877&authkey=!AJP3IVPbExfzpwI&ithint=file%2crar
Install TWRP
1. Download the file TWRP_VKworld_VK6735.rar, unpack on your computer.
2. Install the driver from the Drivers folder by running the installer as Administrator.
3. Turn off the phone and disconnect from the PC and remove the battery.
4. Run SP Flash Tool (flash_tool.exe).
5 . Press the scatter-loading and select the file MT6735M_Android_scatter.txt from the TWRP folder.
6. Click the Download button and immediately connect your smartphone to your computer with the battery removed using the USB cable. The firmware will start downloading automatically.
7. Wait for the completion of the firmware download, a window will pop up with Download OK.
To boot to TWRP hold both buttons: vol + and power.
Install Root
1. Download the file BETA-SuperSU-v2.52.zip (can be found on this forum search for it) and place it without unpacking in the root of your SD card.
2. Boot into recovery TWRP.
3. Select Install, navigate to your ext sd card and select BETA-SuperSU-v2.52.zip and install (swipe to install ... ).
4. After installing the file select reboot system.
Your phone will now have root access.
Again this is not my work
All thanks go to Fish at MDforun Russia
http://mdforum.ru/showthread.php?t=31758

Awesome, it worked perfectly! Thanks so much! There's like no development for this device, so very happy to see root finally working.

Thank you very much! I've rooted the VK6735 with this for about a month now.
Although some root software said it could root this phone; it didn't. I kept searching and finally saw this method.
Everything is working fine (except it takes the phone a little longer to boot).
Installed a couple of root apps and Xposed modules en hadn't had a problem with them.

Thanks

[Resolved] How to root Vodafone Smart Tab 7 (Tablet) VFD 1100 (Solved)

Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100

DevOpsXDA said:
Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100
Click to expand...
Click to collapse
Hi, i can use this way Also for Vodafone Smart Tab 10?

DevOpsXDA said:
Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100
Click to expand...
Click to collapse
where is the archive?