Related
Hello guys I recently tried many recovery.img on Funbook pro and bricked it! but finally found 1 working CWM of Micromax funbook p300 that works on our tab too..!!
Source : http://forum.xda-developers.com/showthread.php?t=1702299
Things Required -
1. Data Connection on your Tablet. (via WIFI)
2. An archieve supported file manager. Eg ES File Explorer.
3. A Usable and working mind.
Steps -
1. Download the file from the link below. ( PLEASE READ BELOW BEFORE FLASHING)
2. Extract the file to the root of your "internal sd card" and you will get 2 file First "Novotools_v1.0" and the Second "recovery.img".
3. Install the app Novotools_v1.0.
4. Run Novotools and you will see and option Flash Recovery
5. Click it and the recovey will be flashed onto your phone.
6. Reboot in recovery with the help of the application.
7. Now you have fully functional CWM recovery. ( PLEASE READ BELOW BEFORE FLASHING )
BUT WAIT ARE U STUCK ON MMX LOGO? MAKE SURE YOU DOWNLOAD THE STOCK BACKUP GIVEN BELOW PLACE IT YOUR SD CARD BEFORE FLASHING CWM UNDER external sd card ie; ext sd clockworkmod\backup\
1) AFTER INSTALLING RECOVERY
2) DO A RESTORE OF THE GIVEN BACKUP
Download -
Recovery - http://www.mediafire.com/?6wn2dow0lz9qoot
Backup - http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Credits:-
Geno for Novotools v1.0
Developer of the Recovery.img
XDA community for all the information and resources.
All the thanks hitter for all the Motivation.
Disclaimer:-
The file is not a flashable zip. Do not try and flash it.
I am not responsible in any way of this makes you tablet unusable.
HIT THANKS if u like my work
Good
At last you found it
cool.gautam said:
Hello guys I recently tried many recovery.img on Funbook pro and bricked it! but finally found 1 working CWM of Micromax funbook p300 that works on our tab too..!!
Source : http://forum.xda-developers.com/showthread.php?t=1702299
Things Required -
1. Data Connection on your Tablet. (via WIFI)
2. An archieve supported file manager. Eg ES File Explorer.
3. A Usable and working mind.
Steps -
1. Download the file from the link below.
2. Extract the file to the root of your "internal sd card" and you will get 2 file First "Novotools_v1.0" and the Second "recovery.img".
3. Install the app Novotools_v1.0.
4. Run Novotools and you will see and option Flash Recovery
5. Click it and the recovey will be flashed onto your phone.
6. Reboot in recovery with the help of the application or the old method by Holding the Home/Options and the Power button.
7. Now you have fully functional CWM recovery.
Download -
http://www.mediafire.com/?6wn2dow0lz9qoot
Credits:-
Geno for Novotools v1.0
Developer of the Recovery.img
XDA community for all the information and resources.
All the thanks hitter for all the Motivation.
Disclaimer:-
The file is not a flashable zip. Do not try and flash it.
I am not responsible in any way of this makes you tablet unusable.
HIT THANKS if u like my work
Click to expand...
Click to collapse
Great stuff. I'll write this on my blog. Is there any chances of getting your devices bricked?
ujjwalk308 said:
Great stuff. I'll write this on my blog. Is there any chances of getting your devices bricked?
Click to expand...
Click to collapse
We need a tester to assure that! didn't brick mine
cool.gautam said:
We need a tester to assure that! didn't brick mine
Click to expand...
Click to collapse
Gautam, You should provide the link and tutorial of Livesuit with Chinese firmware in case of brick. so testers can take risk of trying this..
and as i know you and joby both are successfully installed CWM from Chinese ROM aren't you?
so as a suggestion please include that tutorial in this post just in case..
-Susheel
thatsgamer said:
Gautam, You should provide the link and tutorial of Livesuit with Chinese firmware in case of brick. so testers can take risk of trying this..
and as i know you and joby both are successfully installed CWM from Chinese ROM aren't you?
so as a suggestion please include that tutorial in this post just in case..
-Susheel
Click to expand...
Click to collapse
Will do buddy....!! New method is tried by one member at facebook so i think its working but still will create it!
Video of Rooting/CWM
Gautam do you have the video of CWM installation? Want to view before I go ahead with the process..
kirankowshik said:
Gautam do you have the video of CWM installation? Want to view before I go ahead with the process..
Click to expand...
Click to collapse
Nope....If u somehow brick the device! ( u wont if u follow my steps clearly)
then just follow my how to unbrick tutorial!
cool.gautam said:
Nope....If u somehow brick the device! ( u wont if u follow my steps clearly)
then just follow my how to unbrick tutorial!
Click to expand...
Click to collapse
Can you provide the unbrick tutorial link? http://forum.xda-developers.com/search.php?searchid=78222300 is not working.
+1
I have rooted my P500 by 'unlock root' methoed. can I install this CWM following above procedure. I have read in some post here, following installation method of P300, may result in some brick for P500. thanks in advance.
I have rooted P500 biu now I want to go back and flash original ROM. how to do ?
dsmas said:
I have rooted P500 biu now I want to go back and flash original ROM. how to do ?
Click to expand...
Click to collapse
Have u installed any custom rom? which ? There in only one
But if you simply rooted it nothing else! you are already on stock rom!
cool.gautam said:
Have u installed any custom rom? which ? There in only one
But if you simply rooted it nothing else! you are already on stock rom!
Click to expand...
Click to collapse
Thanks. there are 2 models of funbook p300 and p500. most of the posts are for p300 since p500 is relatively new. As you said it is stock rom but after rooting and with the help of romtoolbox pro, I have removed most of the applications including educative lessions. therefore I wish to have a device as it was given at the showroom.. I hope you got my point.
dsmas said:
Thanks. there are 2 models of funbook p300 and p500. most of the posts are for p300 since p500 is relatively new. As you said it is stock rom but after rooting and with the help of romtoolbox pro, I have removed most of the applications including educative lessions. therefore I wish to have a device as it was given at the showroom.. I hope you got my point.
Click to expand...
Click to collapse
Ohk...Currently we dont have full stock rom! but apps can be recovered! Just install CWM and restore backup provided by me!
Help Meee
i bricked my device then recovered it by using livesuit nd insallin de chinese firmware....nd then recovered the stock ROM....nw my wifi driver is not working....some one pls give me a stock FIRMWARE of Micromax funbook Pro....or some other compatible firmware.....
not working for me ! i downloaded the .zip file and extracted it in sd card(not externel i m talking about internet 8 gb) via pc aand i saw two files novotools.apk and recovery.img and i installed the apk and den clicked on flash recovery and after clicking on flash recovery below came flash recovery and nothing happened den i thought i must check and den clicked on reboot to recovery den also nothing happened ! so i switched off my tab and den went o recovery manually der it was android system recovery ! plzz help me !
i am stuck at funbook logo. please help. now it doesn't move further. please tell me the solutions for it!
Thanks!
yooray said:
i am stuck at funbook logo. please help. now it doesn't move further. please tell me the solutions for it!
Thanks!
Click to expand...
Click to collapse
Chill bro see how to unbrick funbook pro thread And follow the steps ! I also bricked my funbook pro but recovered it back if u need any help or u r stuck at any step just PM ME
Stock backup
cool.gautam said:
Hello guys I recently tried many recovery.img on Funbook pro and bricked it! but finally found 1 working CWM of Micromax funbook p300 that works on our tab too..!!
Source : http://forum.xda-developers.com/showthread.php?t=1702299
Things Required -
1. Data Connection on your Tablet. (via WIFI)
2. An archieve supported file manager. Eg ES File Explorer.
3. A Usable and working mind.
Steps -
1. Download the file from the link below. ( PLEASE READ BELOW BEFORE FLASHING)
2. Extract the file to the root of your "internal sd card" and you will get 2 file First "Novotools_v1.0" and the Second "recovery.img".
3. Install the app Novotools_v1.0.
4. Run Novotools and you will see and option Flash Recovery
5. Click it and the recovey will be flashed onto your phone.
6. Reboot in recovery with the help of the application.
7. Now you have fully functional CWM recovery. ( PLEASE READ BELOW BEFORE FLASHING )
BUT WAIT ARE U STUCK ON MMX LOGO? MAKE SURE YOU DOWNLOAD THE STOCK BACKUP GIVEN BELOW PLACE IT YOUR SD CARD BEFORE FLASHING CWM UNDER external sd card ie; ext sd clockworkmod\backup\
1) AFTER INSTALLING RECOVERY
2) DO A RESTORE OF THE GIVEN BACKUP
Download -
Recovery - http://www.mediafire.com/?6wn2dow0lz9qoot
Backup - http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Credits:-
Geno for Novotools v1.0
Developer of the Recovery.img
XDA community for all the information and resources.
All the thanks hitter for all the Motivation.
Disclaimer:-
The file is not a flashable zip. Do not try and flash it.
I am not responsible in any way of this makes you tablet unusable.
HIT THANKS if u like my work
Click to expand...
Click to collapse
did this stock backup files must always be there or I can delete this after installation of new rom
If you are facing any software problem with your tablet or the tablet is not booting don't worry. You don't have to go to the LAVA Service Center. I am here to help you. Follow the following steps to format your tablet. It will remove everything from your tablet and make it as a new tablet like factory reset.
Requirements-
1. SD Card (It will be formatted, Please backup your data)
2. SD Card Reader
3. Your PC
4. Your Tablet
5. Data Cable
Steps-
1. Download these two zip files.
From all links remove "X" from "adf.Xly" or visit my blog for links.
a) Flash tool for SD card ( ) or Mirror ( ) or Mediafire ( )
b) Image file ( ) or Mirror ( )
Mediafire Link
part1 ( )
part2 ( )
part3 ( )
From all links remove "X" from "adf.Xly" or visit my blog for links.
2. Extract the "Flash tool umedia tablet.zip".
3. Open the "PhoenixCard.exe".
4. Click on "Image File" & browse to where you have downloaded the image file "LAVA_Z7H_S005_20120829_withoutcontent.img".
5. Insert your sd card to the card reader & insert in the usb port of your PC.
6. Click on "Format to Normal", then click Burn.
7. After finishing the above step completely remove the SD Card from card reader & insert it in your tablet. Make sure the tablet is off. Then power on it.
OR
Insert a small pin in the reset hole.
8. Now you can see a red progress bar moving. After it is completed the tablet will be switched off.
9. Now remove the SD Card and Turn on your tablet.
10. Bingo!! You got your new Tablet.
. :good: :good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
Rooting tutorial for LAVA E-tab 7ZH Tablet[/URL]
PRESS THANKS IF I HELP YOU IN ANY MEANS.
Mod Edit: ADfly links removed.
need help
Is there any way to delete the useless content from there, which is provided by lava.
any good custom ROM ?
fresconwebmaster said:
Is there any way to delete the useless content from there, which is provided by lava.
any good custom ROM ?
Click to expand...
Click to collapse
There is no custom ROM. You can delete the system apps manually using ES Explorer.
Thanks
Thanks for ur reply.
Just to know the image that u provided in ur post is it without content of its the same which come with tab
fresconwebmaster said:
Thanks for ur reply.
Just to know the image that u provided in ur post is it without content of its the same which come with tab
Click to expand...
Click to collapse
Yes it is same as the original one & is given by LAVA company only. Without content means The movie & other e-books which are there in the original rom is not included in this version of image file.
helloansuman said:
Yes it is same as the original one & is given by LAVA company only. Without content means The movie & other e-books which are there in the original rom is not included in this version of image file.
Click to expand...
Click to collapse
image file not available for download,plz upload it in mediafire or any reliable website,billionupload sucksa
Plz try tomorrow the rapidshare traffic is exhausted. It will be available for download. I am trying to upload in mediafire.
LuckyDzire said:
image file not available for download,plz upload it in mediafire or any reliable website,billionupload sucksa
Click to expand...
Click to collapse
Mediafire link added. Njoy.
You Are Awesome
Mod Edit: quote of OP removed
Thanx Bro.................... This one Really Help Us to Restore our Customers Tablet...... Thanx Again
farid.saiyed said:
Thanx Bro.................... This one Really Help Us to Restore our Customers Tablet...... Thanx Again
Click to expand...
Click to collapse
welcome bhai. njoy...
bro does it work on too many patterns attempted device?
raffazila said:
bro does it work on too many patterns attempted device?
Click to expand...
Click to collapse
Ya sure. If your hardware is good then it can solve any software problem. Just go for it.
Thank you helloansuman.It worked well.Guys it works on too many pattern attempted sets too.Thanks a lot.
raffazila said:
Thank you helloansuman.It worked well.Guys it works on too many pattern attempted sets too.Thanks a lot.
Click to expand...
Click to collapse
Welcome Great to hear that. There is no problem in lava tablet at all, other than hardware.
Hallo,
I was trying to find custom ROMS for the Canvas 4 -A210 Micromax mobile in this forum and my search yielded one custom Rom which I experimented and met with the difficulties.
I thought I can try some other custom ROM of the same type or equivalent type mobiles. Luckily I came across the "Thread By: bgcngm" which normally read regularly.
I picked up the V3.0MOD Rom and edited and and experimented with the A210 canvas4. Luckily it gave me a good performance except that of the "Video call" facility did not show up. My IMEI was also vanished. This happended to me on previous experiments also.
Hence who ever is going to use this Custom Rom has to back up there IMEI and restore it using Mobileuncle Tool or what ever they feel easier.
I submit and reiterate here all the credit for this ROM to "bgcngm" and also request him further help us to some more modification to ease the application. I am only a learner and new entrant. Based on my use below I provided the details: You should have a Rooted Phone..
1. Find here the CWM recovery that was obtained using the MTKDroid Tool 2.4.8.
2. Use SPFT above 119. I have used 139.
3. Download the stock ROM and click on the Scatter file. This will load up all the files required for the stock rom. Un-**** all the items. Now click preloader and take your curser to the recovery. Click it and point it to the extracted CWM recovery you have downloaded from this.
4. This will install the CWM recovery 5.5.0.4 to your mobile. Also you can try with Mobileuncle tool to install the cwm recovery.
5.Download and copy the Custom Rom to your external or internal sdcard. The url is here:
MMX-XXX-JB_210_ROM => https://docs.google.com/file/d/0B6mi3aQy8tz9TVlJWWJ5SnJMRDA/edit?usp=sharing
6. Before installing please back up every thing using the CWM recovery.
7. Using CWM recovery you select the custom ROM form the location you have copied and install from the AROMA installer.
8. Please back up your IMEI, some time it may be required if you loose yours, this can be restored using Mobileuncle Tool.
9. It is advisable to use custom installation and select what ever application you like.
10. Install and enjoy.
If you like my efforts, please hit thanks.
with best wishes
Please wait Camera is not seen/ working I am recasting it. I am trying. An port it tonight. Please wait
puduraja said:
Hallo,
I was trying to find custom ROMS for the Canvas 4 -A210 Micromax mobile in this forum and my search yielded one custom Rom which I experimented and met with the difficulties.
I thought I can try some other custom ROM of the same type or equivalent type mobiles. Luckily I came across the "Thread By: bgcngm" which normally read regularly.
I picked up the V3.0MOD Rom and edited and and experimented with the A210 canvas4. Luckily it gave me a good performance except that of the "Video call" facility did not show up. My IMEI was also vanished. This happended to me on previous experiments also.
Hence who ever is going to use this Custom Rom has to back up there IMEI and restore it using Mobileuncle Tool or what ever they feel easier.
I submit and reiterate here all the credit for this ROM to "bgcngm" and also request him further help us to some more modification to ease the application. I am only a learner and new entrant. Based on my use below I provided the details: You should have a Rooted Phone..
1. Find here the CWM recovery that was obtained using the MTKDroid Tool 2.4.8.
2. Use SPFT above 119. I have used 139.
3. Download the stock ROM and click on the Scatter file. This will load up all the files required for the stock rom. Un-**** all the items. Now click preloader and take your curser to the recovery. Click it and point it to the extracted CWM recovery you have downloaded from this.
4. This will install the CWM recovery 5.5.0.4 to your mobile. Also you can try with Mobileuncle tool to install the cwm recovery.
5.Download and copy the Custom Rom to your external or internal sdcard. The url is here:
MMX-XXX-JB_210_ROM => https://docs.google.com/file/d/0B6mi3aQy8tz9TVlJWWJ5SnJMRDA/edit?usp=sharing
6. Before installing please back up every thing using the CWM recovery.
7. Using CWM recovery you select the custom ROM form the location you have copied and install from the AROMA installer.
8. Please back up your IMEI, some time it may be required if you loose yours, this can be restored using Mobileuncle Tool.
9. It is advisable to use custom installation and select what ever application you like.
10. Install and enjoy.
If you like my efforts, please hit thanks.
with best wishes
Please wait Camera is not seen/ working I am recasting it. I am trying. An port it tonight. Please wait
Click to expand...
Click to collapse
Man, does the recovery works perfectly in your canvas4 ? have you tried it?
Reply soon
sexydjb said:
Man, does the recovery works perfectly in your canvas4 ? have you tried it?
Reply soon
Click to expand...
Click to collapse
Many time i used the the recovery obtained through Mtk Droid tool and it is working fine. I used the patched recovery provided by MTK Droid Tool.
This worked fine. But the recovery saved inside the mobile in the clockworkbackup created some problem.
Patched recovery provided in the recovery file in the MTK DROID Tool is functioning good and I am using that currently. Whether it is perfect or not I do not know. In what contact you are asking i could not guess.
It suffice the need and operation is normal and good like many other which I have used in the past.
If you meet with any difficulties. You write in this forum. I or any one
will reply.
Sent from my A210 using xda app-developers app
CAN U MAKE a video for INSTALLING CMW i am new to canvas PHONES
Shane said:
CAN U MAKE a video for INSTALLING CMW i am new to canvas PHONES
Click to expand...
Click to collapse
I can narrate step by steps. To make a video I may have to borrow my son's mobile.
Could you please wait for a day or two. Now I am out of Chennai. And after 2 days only I will return.
Sent from my A210 using xda app-developers app
I will try to give you the screen shots from laptop first if you could not be able to follow I shall try the video.
Screen copy is also possible only after I reach Chennai, may be day after.
Kindly bear with till then
Sent from my A210 using xda app-developers app
NO PROB I will give U THE SS just upload here OOK
screen pictures how to install CWM Recovery to Canvas 4
Shane said:
NO PROB I will give U THE SS just upload here OOK
Click to expand...
Click to collapse
Gentle man,
Please find the screen shots for installing the CWM recovery on Canvas 4
1. Download keep ready the SP_Flash_Tool_exe_v3.1312.0.139.zip extract it to a separate folder on your desk top.
2. Double click the blue coloured .exe file as shown below
http://forum.xda-developers.com/attachment.php?attachmentid=2201502&stc=1&d=1376999658
3.Immediately the Smart Phone Flash Tool will pop up. You click on the scatter loading row by taking the courser there, AS SHOWN IN THE SCREEN SHOT BELOW.
http://forum.xda-developers.com/attachment.php?attachmentid=2201517&stc=1&d=1377000012
4. Once you clkick the scatter file your window will ask for the location of the scatter file from the ROM. Hence you should have the SPFT flashable rom file reaqdy in hand. Hope you will be having one or you google it in this from search and down load and keep ready.
5. Take your curser to the MT6589-Android_scatter_emmc.txt file as shown in the picture below and click it.
http://forum.xda-developers.com/attachment.php?attachmentid=2201539&stc=1&d=1377000609
6. Immediately after clicking, the tool will download all the required files from the folder and a tick mark will be seen against the files name as seen here
http://forum.xda-developers.com/attachment.php?attachmentid=2201546&stc=1&d=1377000844
7. Now un-tick all the boxes except the preloader file. Then go to Recovery file and tick it. Now do a sigle click of the recovery file. A window eill pop up and ask for the location of the file in your stock Rom folder. Now take your courser to the location where you have saved your CWM recovery file and click/ open or do a double click. The stock recvery file will be replaced by the CWM Recovery file as seen in the shot below.
http://forum.xda-developers.com/attachment.php?attachmentid=2201559&stc=1&d=1377001277
8. Similarly if you want you can upload the patched Boot.img file also. It has been recommended by the senior developer of the MTK Tools to flash the patched boot.img also for a better shell performance of the phone. It can be done on a trial and error basis. I have upload this .img also into my phone during the flash. You can do a separate flash or single flash of both the files together. No other files are required.
9. After ticking stay awake and usb debugging in your phone your put off your phone. Remove the batter. Connect the phone to your PC/ Lap top using the USB cable provided along with the phone. After connecting your phone now put your batter into the phone again. For some PC or Lap top you may have to put after clicking the download button. It depends on how you have installed the drivers or framwork of driver loading. Normally I connect the batter before clicking download section.
9.After downloading the required file, just look above the 5 white rows of the SPFT tool you can notice, four different components, vice ----Format----, firmware upgrade-----, download------- and DA DL all with check sum. Just click on the Download section there as shown in the pictures below
http://forum.xda-developers.com/attachment.php?attachmentid=2201573&stc=1&d=1377001862
a window will pop up asking you yes or now withe warning as seen in the above shot. Ignore the warning and click yes.
10. Depending up on the RAM and other features of your PC/Laptop first yellow flash across the bottom most row will glowing through as shown in the shot below and followed by a Purple/indigo micture glowing flash and finally a yellow beam that ends with a green circle as you seen in the shots below.
Though the CWM and Boot.img file file has already been uploaded by me in this portal for making it holistic I am up loading the files here.
https://docs.google.com/file/d/0B6mi3aQy8tz9XzhyZmFmQUtqWVk/edit?usp=sharing .... Patched boot.img file.
https://docs.google.com/file/d/0B6mi3aQy8tz9MldBYUlCdkxIRW8/edit?usp=sharing ----- CWM Recovery file
https://docs.google.com/file/d/0B6mi3aQy8tz9bHdXUWtYMUZPZTQ/edit?usp=sharing ---- SPFT 139 file
Extractthese files and keep it separatedly and use it
With bewst of my wishes.
u r patched bootIMAGE is not working PLZ DO IF U CAN MAKE SIZE LARGER OF FONT or if u can provide me kernel files SO MY FRND CAN ADD FEATURES IN IT not img file
Canvas 4 A210 boot.img
Shane said:
u r patched bootIMAGE is not working PLZ DO IF U CAN MAKE SIZE LARGER OF FONT or if u can provide me kernel files SO MY FRND CAN ADD FEATURES IN IT not img file
Click to expand...
Click to collapse
Dear Sir,
I am porting the stock Boot.img and also stock recovery.img. If further improvements takes place. I will be very happy. I do not know how to extract the kernel. The files are in 7z format and kindly extract them.
I am unable to upload directly due to the reasons as below
"Your submission could not be processed because a security token was missing.
If this occurred unexpectedly, please inform the administrator and describe the action you performed before you received this error"
Please use this google drive url.
https://docs.google.com/file/d/0B6mi3aQy8tz9ZGxjbXJGVG1hUm8/edit?usp=sharing ;;;;; boot.img file
https://docs.google.com/file/d/0B6mi3aQy8tz9NFpra3hWUmJmSzQ/edit?usp=sharing .... recovery file
Regards,
puduraja said:
Hallo,
I was trying to find custom ROMS for the Canvas 4 -A210 Micromax mobile in this forum and my search yielded one custom Rom which I experimented and met with the difficulties.
I thought I can try some other custom ROM of the same type or equivalent type mobiles. Luckily I came across the "Thread By: bgcngm" which normally read regularly.
I picked up the V3.0MOD Rom and edited and and experimented with the A210 canvas4. Luckily it gave me a good performance except that of the "Video call" facility did not show up. My IMEI was also vanished. This happended to me on previous experiments also.
Hence who ever is going to use this Custom Rom has to back up there IMEI and restore it using Mobileuncle Tool or what ever they feel easier.
I submit and reiterate here all the credit for this ROM to "bgcngm" and also request him further help us to some more modification to ease the application. I am only a learner and new entrant. Based on my use below I provided the details: You should have a Rooted Phone..
1. Find here the CWM recovery that was obtained using the MTKDroid Tool 2.4.8.
2. Use SPFT above 119. I have used 139.
3. Download the stock ROM and click on the Scatter file. This will load up all the files required for the stock rom. Un-**** all the items. Now click preloader and take your curser to the recovery. Click it and point it to the extracted CWM recovery you have downloaded from this.
4. This will install the CWM recovery 5.5.0.4 to your mobile. Also you can try with Mobileuncle tool to install the cwm recovery.
5.Download and copy the Custom Rom to your external or internal sdcard. The url is here:
MMX-XXX-JB_210_ROM => https://docs.google.com/file/d/0B6mi3aQy8tz9TVlJWWJ5SnJMRDA/edit?usp=sharing
6. Before installing please back up every thing using the CWM recovery.
7. Using CWM recovery you select the custom ROM form the location you have copied and install from the AROMA installer.
8. Please back up your IMEI, some time it may be required if you loose yours, this can be restored using Mobileuncle Tool.
9. It is advisable to use custom installation and select what ever application you like.
10. Install and enjoy.
If you like my efforts, please hit thanks.
with best wishes
Please wait Camera is not seen/ working I am recasting it. I am trying. An port it tonight. Please wait
Click to expand...
Click to collapse
I installed it but then there was nothing inside the rom.. Even the touch in the aroma installer was not working,somehow managed to install it.
You said you ll port again, when can we expect the new upload from your side which we can actually use not on experimental basis.
Thank you
sexydjb said:
I installed it but then there was nothing inside the rom.. Even the touch in the aroma installer was not working,somehow managed to install it.
You said you ll port again, when can we expect the new upload from your side which we can actually use not on experimental basis.
Thank you
Click to expand...
Click to collapse
The is 547 MB and why nothing inside.
AROMA installer problems is also felt by me. But using volume up and down key and power on switch we have to install the Rom Colour scheme in the touch is not working for volume up and down buttons.
Since I was busy with local works I could not improve it. Developers who are free can attempt it.. For another one week I have busy schedule and afterwards I will try to improve it.
Thanks for your attempts
puduraja said:
Hallo,
I was trying to find custom ROMS for the Canvas 4 -A210 Micromax mobile in this forum and my search yielded one custom Rom which I experimented and met with the difficulties.
I thought I can try some other custom ROM of the same type or equivalent type mobiles. Luckily I came across the "Thread By: bgcngm" which normally read regularly.
I picked up the V3.0MOD Rom and edited and and experimented with the A210 canvas4. Luckily it gave me a good performance except that of the "Video call" facility did not show up. My IMEI was also vanished. This happended to me on previous experiments also.
Hence who ever is going to use this Custom Rom has to back up there IMEI and restore it using Mobileuncle Tool or what ever they feel easier.
I submit and reiterate here all the credit for this ROM to "bgcngm" and also request him further help us to some more modification to ease the application. I am only a learner and new entrant. Based on my use below I provided the details: You should have a Rooted Phone..
1. Find here the CWM recovery that was obtained using the MTKDroid Tool 2.4.8.
2. Use SPFT above 119. I have used 139.
3. Download the stock ROM and click on the Scatter file. This will load up all the files required for the stock rom. Un-**** all the items. Now click preloader and take your curser to the recovery. Click it and point it to the extracted CWM recovery you have downloaded from this.
4. This will install the CWM recovery 5.5.0.4 to your mobile. Also you can try with Mobileuncle tool to install the cwm recovery.
5.Download and copy the Custom Rom to your external or internal sdcard. The url is here:
MMX-XXX-JB_210_ROM => https://docs.google.com/file/d/0B6mi3aQy8tz9TVlJWWJ5SnJMRDA/edit?usp=sharing
6. Before installing please back up every thing using the CWM recovery.
7. Using CWM recovery you select the custom ROM form the location you have copied and install from the AROMA installer.
8. Please back up your IMEI, some time it may be required if you loose yours, this can be restored using Mobileuncle Tool.
9. It is advisable to use custom installation and select what ever application you like.
10. Install and enjoy.
If you like my efforts, please hit thanks.
with best wishes
Please wait Camera is not seen/ working I am recasting it. I am trying. An port it tonight. Please wait
Click to expand...
Click to collapse
Did yu fix the Camera App.
Not yet.
I have some other urgent work on duty and could not concentrate on this.
Please if some one could help it is good.
I can attend to the fix only after 10th September due to duty work.
I am sorry.
Sent from my A210 using xda app-developers app
Screens??
Any screensots of the rom?
What are the screen shots required If you list I shall port it immediately.
It is stock based one.
I can load this custom ROM, which is in the sd card and take shots and post it immediately.
Thanks
Sent from my A210 using xda app-developers app
NeroD said:
Any screensots of the rom?
Click to expand...
Click to collapse
Sent from my A210 using xda app-developers app
Warning: This thread is for Karbonn smart tab 8 version 2
Version 2 tablets can be identified by S/N: ST*********** ver 2 at the back panel of the device
Root on Karbonn ST-8 Ver 2:
DISCLAIMER: ROOTING YOUR TABLET WILL PROBABLY VOID YOUR WARRANTY FROM THE MANUFACTURER. IF YOU DO NOT WISH TO ACCEPT FAULT FOR ANY ADVERSE EFFECTS OF ROOTING, THEN DO NOT READ ANY FURTHER. HERE BE DRAGONS.
Click to expand...
Click to collapse
Rooting
Download the utoo-root-signed.zip from here and copy it to a microSD card (do NOT extract it)
Charge up the battery in your Karbonn ST-8_version2, Power Off and remove the charger cable.
Insert the microSD card into your tablet
Get into Recovery mode( Power+volume down ) .
In the recovery you can move with the Volume down button, you can select with Power or Volume up
Select the apply update from EXT option
Select the utoo-root-signed.zip, this will install the package
Wait for the update to finish
Select reboot system now
This is a tried and tested method and has worked for everyone till now.
Attached zip credit goes to xda user @Lannig
Lag-free Tweak
Install SetCPU app
Download the file Setcpu.txt from here
Paste it into the root of your SD Card
Open SetCPU, first change the governor from "conservative" to "performance2"(This is the most important thing)
Click on options button(three dots) and then click Device Selection
Select Custom Frequencies
Now Set Min frequency to 48 MHz and Max frequency to anything according to your preference(Now you'll have the choice of setting the frequency upto 1.5 GHz)
Note:
When you wan't to conserve more battery lower the Max Frequency(while browsing or listening to music maybe) and when playing HD games up the Max Frequency(Most games will run perfectly with even 1200 MHz)
48MHz of Min frequency will give more battery in in standby mode.
Try not to Clock the CPU above 1.2 GHz for a long time as it could cause heat issues. The governor itself should speedup everything for you.
Low Internal Memory
The fact that our devices have only 1.51 GB of Internal Storage limits the capabilities of our devices. Especially with HD Games.
I recommend using GL2SD for games at the moment.
Get used to using the app, its pretty easy..
Also SEE THIS
Battery Tips
Build.prop edits
hw.nophone=true(was false)
hw.hasdata=false(was commented out and true)
ro.carrier=wifi-only(was unknown)
wifi.supplicant_scan_interval=240(was commented out)
hw.hasethernet=false(was true)[ I dont use ethernet ]
I use Greenify a lot
Also i had
1)phone.apk and odex
2)telephony.apk and odex
I removed them ( to stop displaying of cell signal usage in battery stats )
Also for ppl who want to unbrick st8-v2
Get the stock firmware package from HERE
Get the amlogic flash tool from HERE or HERE
Follow the instructions for the flash tool using the instruction manual from HERE or HERE
See the above posts and remember...........do not do things blindly........read the details completely and understand and then implement
Press Thanks if I helped U..........cheers
Stock Karbonn ST-8 Ver 2
Karbonn ST-8 v2 Stock ROM Dump And Unbricking ur bricked tablet
For a complete dump head to :
Mirror 1 [Box.com]
Mirror 2 [Mediafire.com]
For ppl who have flashed wrong TWRP in a hurry SEE THIS
also attached to this post is the Stock Recovery for Karbonn ST-8 Ver 2
Press Thanks if I helped U..........cheers
TWRP ON ST-8 V2
1. TWRP Testing for interested ppl
2. Partially tested TWRP
Link1
Link2
Press Thanks if I helped U..........cheers
Reserved...
waiting for twrp
TWRP Recvoery For smart tab 8 ver 2 Stock flashable
The attached file contains TWRP for Smart tab8 ver2.
It is initial release so it contains many bugs.
As i'm very lazy to do so myself so, if u tell me i'll resolve the bugs accordingly.
AND PLEASE NOTE I Don't have the tab so u have to check the releases yourself. My friend needs the twrp because he screwed his tablet. So i just made one for him to recover his tablet Just As is basis.
fizzy177 said:
The attached file contains TWRP for Smart tab8 ver2.
It is initial release so it contains many bugs.
As i'm very lazy to do so myself so, if u tell me i'll resolve the bugs accordingly.
AND PLEASE NOTE I Don't have the tab so u have to check the releases yourself. My friend needs the twrp because he screwed his tablet. So i just made one for him to recover his tablet Just As is basis.
Click to expand...
Click to collapse
EDIT: ur zip dosent flash in stock recovery....i got the recovery.img from zip and flashed it using flash_image binary
1. TWRP menu is visible and can be navigated
2. All buttons working
3. Reboot and settings menu fully working
4. Backup and Restore working ( tried system and data backup )
5. Mount menu ....only external sdcard can be mounted
6. Advanced menu copy log to sd working ....terminal command and file manager not working( flickering of recovery -->slide to unlock then black out)
7. Didnt try install and wipe options
need help.. please, White screen boot
I had just received my 'smart tab 8 Ver 2' two days ago and i was trying to root and install fuser-invent custom rom in it.. one thing led to another and by the time i realized the firmware of ver1 is diff than ver 2, the damage was already done.. now my tab displays a white screen and nothing else.. it wont even boot into stock recovery. can some one please help me. :crying::crying:
Root.....Check!
Thanks for the Root dude! It worked Awesome!!
Now if only we can have the Custom bugless roms the V1 users have and then it would be an icing on the cake!
I'm prepared to help out in anyway to be able to experience that goodness!! :fingers-crossed:
I am also facing the same problem , but when i connect my tablet to pc it shows "M3 CHiP" a new hard ware found . But i dont know how to fix my tablet . i knows M3 chip is amlogic processor and AML flash tool can be used to flash it ( i found it from google) . Somebody please help me to fix my tablet .
UP
unbrick
Aviast11 said:
I am also facing the same problem , but when i connect my tablet to pc it shows "M3 CHiP" a new hard ware found . But i dont know how to fix my tablet . i knows M3 chip is amlogic processor and AML flash tool can be used to flash it ( i found it from google) . Somebody please help me to fix my tablet .
Click to expand...
Click to collapse
Steps to unbrick ur tab:
Unbrick st-8-V2
1. Download the above zip extract the above zip to the root of an empty sdcard. It should look like this
2. Put the sdcard in your tablet
3. Press Power+Volume down and let it update the tablet
for furthur assistance see this link
the method i mentioned is the first one,sdcard one ....report after ur trial so that it may help others...
2012katas said:
Steps to unbrick ur tab:
1. Download the above zip extract the above zip to the root of an empty sdcard. It should look like
2. Put the sdcard in your tablet
3. Press Power+Volume down and let it update the tablet
for furthur assistance see
the method i mentioned is the first one,sdcard one ....report after ur trial so that it may help others...
Click to expand...
Click to collapse
Hi
I tried the way u mentioned , but nothing happend , still its showing white screen.
the way i did is :-
1. extract the zip and put all files inside my SD card (same as the image u showed)
2. put SD card in my tablet and pressed vol down+power (i tried with all key combinations)
3. only white screen.
also i downloaded "usb image tool" but i dont have image file to load ..
please help me to fix my tablet.
i am a newbie, I wanted to know if there is any method to upgrade Smarttab ver-2 to android 4.2.2
I want to use multiple useraccount feature in 4.2.2
I have read the forum threads and it isnt quite clear if such an upgrade is possible and tested.
recovery
the above method aborted after starting update.please guide to recover my karbon velox smat tab 8 v2 .it is always booting to recovery screen.
unbricking st8 version2
nickrulez13789 said:
I had just received my 'smart tab 8 Ver 2' two days ago and i was trying to root and install fuser-invent custom rom in it.. one thing led to another and by the time i realized the firmware of ver1 is diff than ver 2, the damage was already done.. now my tab displays a white screen and nothing else.. it wont even boot into stock recovery. can some one please help me. :crying::crying:
Click to expand...
Click to collapse
Aviast11 said:
I am also facing the same problem , but when i connect my tablet to pc it shows "M3 CHiP" a new hard ware found . But i dont know how to fix my tablet . i knows M3 chip is amlogic processor and AML flash tool can be used to flash it ( i found it from google) . Somebody please help me to fix my tablet .
Click to expand...
Click to collapse
assipposi said:
the above method aborted after starting update.please guide to recover my karbon velox smat tab 8 v2 .it is always booting to recovery screen.
Click to expand...
Click to collapse
Ok guys,This the first and last time I am posting this....
To unbrick ur tab......
1. Post what u did
2. What is wrong with the tablet according to your understanding
If you want to be helped the above two points really matter........
3. See this link
4. All info about unbricking various types of bricks can be found on the thread....
5. Also i would suggest you go through the thread fully and understand every detail
6. Another alternative for you guys would be Karbonn service center, But I feel it is useless as they take minimum 30-45 days to repair things
7. The method i mentioned is the first one,sdcard one
At this moment we have an experimental unbrick package with us thanks to developer @fuser-invent
This package is to be used in the STEP 3 of SOFT BRICK UNBRICK SDCARD method
Step 3
This only works if the first method completed far enough to allow you into the Stock Recovery or if the Alternative Methods worked and you now need to install the correct firmware.
0. Restore your SD card back to normal capacity with the SD Formatter software. This can take a long time, be patient. Choose the following options:
- FORMAT TYPE -> FULL (Overwrite)
- FORMAT SIZE ADJUSTMENT -> ON
1. Get THIS firmware package
2. Download the above zip extract the above zip to the root of an empty sdcard( less than 2gb ). It should look like this all four files should be in the root of the sdcard.
3. Just FYI, the zip folder among those four files is the stock rom ( it has boot.img,bootloder.img,system,recovery.img,aml_logo.img,logo.img )
Also this package is a recovery package for soft bricks....
4. Put the sdcard in your tablet
5. Hold down the Power and Vol - buttons to enter the Stock Recovery
6. Flash your firmware package and reboot the tablet.
7. If it worked, either plug your tablet into the computer and use USB mode or shut down your tablet and remove the SD card, then remove the "u-boot.bin" and "uImage_recovery" files from your SD card.
8. Boot back into recovery and make sure that the firmware package correctly installed the Stock Recovery on your device.
Your tablet is now back to it's original Factory Settings.
6. For furthur assistance see this link
7. If you are successful plz report back...........it will help others
2012katas said:
Ok guys,This the first and last time I am posting this....
To unbrick ur tab......
1. Post what u did
2. What is wrong with the tablet according to your understanding
If you want to be helped the above two points really matter........
At this moment we have an experimental unbrick package with us thanks to developer @fuser-invent
1. Get THIS frimware package
2. Download the above zip extract the above zip to the root of an empty sdcard( less than 2gb ). It should look like this
3. Just FYI, the zip folder among those four files is the stock rom ( it has boot.img,bootloder.img,system,recovery.img,aml_logo.img,logo.img )
Also this package is a recovery package for soft bricks....
4. Put the sdcard in your tablet
5. Press Power+Volume down and let it update the tablet
6. For furthur assistance see this link
The method i mentioned is the first one,sdcard one ....report after ur trial so that it may help others...
7. All info about unbricking various types of bricks can be found on the thread....
8. Also i would suggest you go through the thread fully and understand every detail
9. If you are successful plz report back...........it will help others
10. Another alternative for you guys would be Karbonn service center, But I feel it is useless as they take minimum 30-45 days to repair things
Click to expand...
Click to collapse
As 2012katas said, it's very important to go to the thread he links in #6. Yes, it is a HUGE thread, but it is detailed for a reason. 99% of your questions will be answered in that thread.
For example, the thread clearly says to use the ELF2 rescue image and the USB image tool to prepare your card first, then delete the ELF2 files from it and replace them with the files for your tablet. It also says that if that doesn't work you can try the SD Formatter software with my suggested settings to try and prep your card. I have no idea if the package will work until someone tries it the correct way and reports back.
On another note. If it doesn't work the first time, try to delete the u-boot.bin file only and then try again. Also mentioned in the thread, some people need to press and hold the power and vol- buttons and then when the tablet starts lighting up, start pressing the power button repeatedly, but that is rare.
As for the people with deep bricked tablets (showing the M3/M6 chip), you don't have anything to loose at this point so you best bet is to download the ST10_20121129.zip package, remove the patch.zip and update.zip, put the ST8 v2 firmware package zip I made in that folder, edit the config_progress.xml so the firmware package name is correct and no longer called update.zip, delete the part for the patch.zip, renumber the remaining steps, zip the whole thing back up and load it into the AML USB Burning software.
That might work or it might not work. You have to intelligently experiment because there is no official release for the tablet. Also you will notice that in the unbricking thread I say that if you can get the tablet showing some signs of life after the M3/M6 chip deep brick, you can then move to the SD card method. So if the usb_spl.bin and u-boot-orig.bin for the ST10 work with the ST8 to at least get the tablet out of M3/M6 mode then you could use the SD card method.
Lastly, to 2012katas, I'm rarely on XDA so if you have more questions, I see them more often on DragonDevs. You seem into this Dev stuff and smart, so feel free to get in touch to troubleshoot more.
Awesome TAB
I love this tab...
Runs Asphalt 8 flawless on 1.5ghz OC'ed.............totally awesome no lags..
btw OC'ed for battery=100% to battery=6%
tablet heats up a little on back side...........but okay for gaming........
Hi All,
I accidentally flashed TWRP recovery before routing. On Karbon Smart tab 8 Ver 2
Now, I can't do any thing...
I tried factory reset it not working.
Also failed to get into fastboot mode...
Need help to go back and flash stock recovery..
if anyone have all he junks that is pre-installed in the tab, please upload.
Hello gc2 users,
first as usaual im not responsible for bricked devices and dead sd cards if u dont any thing wrong contact me in youtube by commenting
BACK UP FIRST INCASE ANYTHING HAPPEN.......
+required =
+galaxy core 2 phone
+rooted and required TWRP RECOVERY
MOST NEEDED A BRAIN;;;;;
AS I CAN NOT UPLOAD LINK IM REQUESTING GC2 USERS TO SEARCH IN YOU TUBE [yadurobo] in youtube from first results' select first video based on this custom rom in comment section i posted a link that would lead to download in google drive...from there download the file
+ if any senior members can post the link from the video as i mentioned above as a reply will be appreciated
EXTRACT ZIP YOU HAVE DOWNLOADED
PASTE IT INTO UR EXTSD.CARD IN TWRP FOLDER
BOOT INTO TWRP RECOVERY
CHOOSE RESTORE IN MAIN MENU OF TWRP
CHOOSE BACKUP FILE YOU HAVE DOWNLODED
THEN WOLA,,,,
IT STARTS TO INSTALL WAIT FOR 10 MINS MAX
[
REBOOT TWO TIMES AFTER INSTALLATION
NO START UP WIZARD AS IT IS MY BACKUP
IT IS SIMPLE TO DO THAN ZIP FLASHING
WORKING EVERYTHING
NOT WORKING=NIL
ENJOY.........
this rom is made by 90 percentage blind user thats me
hit tnx button if this worked for you ...........
and if any devolopers can support me to make this backup to a flashablezip will be a great help indeed
do inform me if this doesnt work
i inserted a link so pls flash that file too after flashing rom
yadu123 said:
Hello gc2 users,
first as usaual im not responsible for bricked devices and dead sd cards if u dont any thing wrong contact me in youtube by commenting
BACK UP FIRST INCASE ANYTHING HAPPEN.......
+required =
+galaxy core 2 phone
+rooted and required TWRP RECOVERY
MOST NEEDED A BRAIN;;;;;
AS I CAN NOT UPLOAD LINK IM REQUESTING GC2 USERS TO SEARCH IN YOU TUBE [yadurobo] in youtube from first results' select first video based on this custom rom in comment section i posted a link that would lead to download in google drive...from there download the file
+ if any senior members can post the link from the video as i mentioned above as a reply will be appreciated
EXTRACT ZIP YOU HAVE DOWNLOADED
PASTE IT INTO UR EXTSD.CARD IN TWRP FOLDER
BOOT INTO TWRP RECOVERY
CHOOSE RESTORE IN MAIN MENU OF TWRP
CHOOSE BACKUP FILE YOU HAVE DOWNLODED
THEN WOLA,,,,
IT STARTS TO INSTALL WAIT FOR 10 MINS MAX
[
REBOOT TWO TIMES AFTER INSTALLATION
NO START UP WIZARD AS IT IS MY BACKUP
IT IS SIMPLE TO DO THAN ZIP FLASHING
WORKING EVERYTHING
NOT WORKING=NIL
ENJOY.........
this rom is made by 90 percentage blind user thats me
hit tnx button if this worked for you ...........
and if any devolopers can support me to make this backup to a flashablezip will be a great help indeed
do inform me if this doesnt work
Click to expand...
Click to collapse
what is the version of the rom?
355H? HN? M?
355H
Sent from my SM-G900F using XDA Free mobile app
@yadu123 Screenshots? Links? More details bro!!!
Hi, awesome work:good:
Video:
youtube.com/watch?v=NV5b2EElrIs
Download:
docs.google.com/uc?export=download&confirm=1IND&id=0Bytk4Z6klYZybG5SZFpUeFBBVU0
Regards.
SCREEN SHOTS......
Sent from my SM-G900F using XDA Free mobile app
yadu123 said:
SCREEN SHOTS......
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Not working with 355m , i changed the boot.img but no sucess
i'll stay with my modded rom, great work
cheers
tnx for info any way you got A nice rom there upload it brother
Sent from my SM-G900F using XDA Free mobile app
Looks so cool
i am downloading now
can i ask for a short description of how you made this, more like a bar story then a how to
thanks will let you know how it goes
i have SM-G355H and i allready have and use that exra zip init.d patch . i normaly install the apk as well. but i dont really use startup scripts that much
downloading
Hi im currently downloading your creation, i found 2 links, first is the one in mega and its around 400mb and another in google drive and its around 900mb.
Regarding the one in mega, this is the one that i need to copy in my twrp folder and then restore using twrp?
How about the one in google drive, is this flashable using twrp and install?
Thank you and i hope i can make it work, ive watched the video in youtube and its really nice you did a good job :good:
how to make it look like the one on youtube?
Hi im able to install this and please share the modifications you did, so that it will look like the one on your youtube video?
Thank you
yadu123 said:
Hello gc2 users,
first as usaual im not responsible for bricked devices and dead sd cards if u dont any thing wrong contact me in youtube by commenting
BACK UP FIRST INCASE ANYTHING HAPPEN.......
+required =
+galaxy core 2 phone
+rooted and required TWRP RECOVERY
MOST NEEDED A BRAIN;;;;;
AS I CAN NOT UPLOAD LINK IM REQUESTING GC2 USERS TO SEARCH IN YOU TUBE [yadurobo] in youtube from first results' select first video based on this custom rom in comment section i posted a link that would lead to download in google drive...from there download the file
+ if any senior members can post the link from the video as i mentioned above as a reply will be appreciated
EXTRACT ZIP YOU HAVE DOWNLOADED
PASTE IT INTO UR EXTSD.CARD IN TWRP FOLDER
BOOT INTO TWRP RECOVERY
CHOOSE RESTORE IN MAIN MENU OF TWRP
CHOOSE BACKUP FILE YOU HAVE DOWNLODED
THEN WOLA,,,,
IT STARTS TO INSTALL WAIT FOR 10 MINS MAX
[
REBOOT TWO TIMES AFTER INSTALLATION
NO START UP WIZARD AS IT IS MY BACKUP
IT IS SIMPLE TO DO THAN ZIP FLASHING
WORKING EVERYTHING
NOT WORKING=NIL
ENJOY.........
this rom is made by 90 percentage blind user thats me
hit tnx button if this worked for you ...........
and if any devolopers can support me to make this backup to a flashablezip will be a great help indeed
do inform me if this doesnt work
i inserted a link so pls flash that file too after flashing rom
Click to expand...
Click to collapse
not working on SM-G355HXXU0AOB1......also the tutorial, nothing is showing up after clicking the restore button in twrp recovery...i followed your instruction like after extracting the downloaded zipfile to put it inside the twrp folder under sd card storage....
i tried flashing your file and was stucked up to boot animation only...im also confused because you have 2 different files posted..one in mega which is around 400 mb and the other one in dropbox is 900 plus mb..both are not working ...
Grindher said:
Not working with 355m , i changed the boot.img but no sucess
i'll stay with my modded rom, great work
cheers
Click to expand...
Click to collapse
can post the tutorial to do this?
But i didnt post link to mega i only posted google drive link & i dont hv accountnin mega too
dwenski said:
Hi im currently downloading your creation, i found 2 links, first is the one in mega and its around 400mb and another in google drive and its around 900mb.
Regarding the one in mega, this is the one that i need to copy in my twrp folder and then restore using twrp?
How about the one in google drive, is this flashable using twrp and install?
Thank you and i hope i can make it work, ive watched the video in youtube and its really nice you did a good job :good:
Click to expand...
Click to collapse
Read carefully bro the one in google drive is correct link restore it