Database Info

Rooting and Flashing a custom ROM

I flashed the leaked froyo firmware I897UCJI6 on my samsung captivate using odin 1-click method. I have a working 2.2 now. My phone is not rooted. I am planning to flash a custom ROM and try other custom ROMs out there in the market. I've gone through a three part video series by mobiletechvideos on how to root and flash a custom ROM (http://forum.xda-developers.com/showthread.php?t=884364). But, i still have a few questions.
1. For rooting, do i need to flash the phone back to the stock JF6?
2. In the xda link given above, i am fine until step #4. Step #5 is a little bit confusing to me. After i copy the root file to the root directory in the internal sd card on my phone, i rename it to update.zip. Also, i copy the clockworkrecovery to the root directory in the internal sd card in the phone and rename it to update.zip. Now, after i am doing with rooting and clockworkrecovery, i have to proceed further to flash the custom ROM. Now, the steps mentioned in the xda forum does not say anything about moving the custom ROM file to the root directory in the internal sd card on the phone. My question is: Do i need to copy the custom ROM zip file into the root directory of the phone? Do i need to rename the custome ROM file to update.zip as well?
Someone please help.

Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist

mcord11758 said:
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
Click to expand...
Click to collapse
Thanks for the reply. What is 3e recovery by the way? I am able to flash back to stock (jf6) using odin 1-click by following the volume up + down method to download. My build number is not in that 1000 series. Are you referring to s/n number found under the battery? In many threads I have seen ppl saying if u r under 1009 build # then you need to use 3 key combo method. You are saying the opposite. I am confused now. Sorry sir but I think I need.more explanation. I thank you for your time
Sent from my SAMSUNG-SGH-I897 using XDA App

Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate

mcord11758 said:
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
Click to expand...
Click to collapse
Pls clarify if s/n # found under battery is actually the build number. Also, according to many posts in this forum, three buttom combo is
1. Vol up
+
2. Vol down
+
3. Press Power button
Since when USB slot became a button? I am sorry but I dont understand.
Sent from my SAMSUNG-SGH-I897 using XDA App

Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008

mcord11758 said:
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
Click to expand...
Click to collapse
Thank you. Mine is 1007. So, now back to the question. I need to flash back to stock JF6 using odin 1-click. Then,i need to root the phone and install.clockworkmod recovery using the info found in the 3 part video series by mobiletechvideos. And,proceed with the custom ROM flash. Is my understanding correct? Thanks for replying patiently to all my queries. Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App

No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy

mcord11758 said:
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
Click to expand...
Click to collapse
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App

antonyvijai said:
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
When you open my files app you are looking at the root of your sd. You will see your download folder, go to it long press either file select move phone will direct you to root if sd, select paste.
You are correct you need root to run programs like titanium backup to backup your apps, but when you flash stock they will all be gone either way. So unless you are rooted now you can not back up your apps. You can dl them again do not restore any system data just user apps. Backup contacts by exporting to ext sd, or sim
I am checking out so I won't be responding again for the night. Good luck

The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.

^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.

bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
also very true^^ his toolbox program has everything you would need in one spot

MaximumPotential said:
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
Click to expand...
Click to collapse
Thanks a lot. This helps a lot. I also saw thw video on toolbox from bay_wolf on mobiletechvideo series. That looks pretty simple for an, amateur like me. The explanation you gave me is also superb. Thank you very much
Sent from my SAMSUNG-SGH-I897 using XDA App

bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
Thank you. I have your toolbox program installed in my computer running 64 bit windows 7 home.premium edition. I have a few questions. My phone is running the leaked JI6 2.2 rightnow. What should I choose first from the toolbox? If I choose, flash to stock then do I need to select thw JF6 firmware file from somewhere or the tool itself will do the job? Sameway, if I click root, then do I need to select a root / clockwork files to finish rooting or again the tool itself will do the job? I understand for flashing the custom ROM I need to choose the the ROM .zip file. I watched the video about your program on mobiletechvideos on youtube. I think I need to watch it again or if you don't mind then can you give me the steps to use your toolbox (given what firmware I have currently running). Thank you
Sent from my SAMSUNG-SGH-I897 using XDA App

Why ji6? What are the benefits other than the audience chip will work?

[q] need original rom spice-mi700 build 5012_3_16p

Hi
I wonder if anyone here can help me out, I just damage the original rom of my Spice Mi700 build 5012_3_16P (Indonesian Version) I cant make a phone call, browse internet, etc. Now I need the original ROM of it to flash it back to my device. I couldn't go to the store to get it fix cause i'm too far away from the store (needs 2 flights to get there).
So if anyone here got the device and can dump the clean ROM for me or if anyone had the original ROM would you please share it to me??
BIG THANKS,
ps: mods, if this is the wrong place to ask please move it to the right place, tq.

Did u tried to flash a custom ROM or damaged it while using?
Before flashing try factory reset ur device.Follow the steps below.
---->IF U CAN BOOT INTO RECOVERY VIA KEY THEN SKIP THE 1) N 2) 3) STEP.
IF NOT THEN FOLLOW ALL THE 4 STEPS.
1)Turn on ur pc n search for quick boot app on the internet.
2)Install it run it.
3)Select the recovery boot.(This will boot ur device with inbuilt recovery mode present in ur device.)
4)Then select the wipe date or factory reset something like that.
Wait until it is finished.Then reboot ur device n check weather the prob is solved or not.
Here's the quick boot app:
I am not allowed to post link but here's the path for it:
Google for quickboot.apk u will see the mediafire link download it.

Thanks for the reply,
I have done repairing the device, I search all over the net finnally I have solution flash back using custom ROM.
Here's what happen that make my OS broken, at the time my phone was temporary rooted, then I do a Factory Reset (while it still rooted). After the reset there's when a lot of my device features can't be use. I can't make a phone call, lost my browser, can't install apps, my builtin file browser was not installed. So I'm almost can not do anything. I even tried to install the apps using ADB and still failed. So in my confusion status i search here the any possibilities to fix it, what i found is a custom ROM but its for 5012_3_16I (mine is 16P). I'm afraid it will not work for my device. But anyway what's the worst it can be, so i do this way :
1. Install clokwordrecovery.img
2. Reboot to the recovery (using adb commands)
3. Backup the last state of my device
4. Then install the custom ROM from this XDA (i cannot post a link too, just search it with a thread title "[REQ] Developers Interest NEEDED: Samsung Tab Alternative - Spice Mi700 DroidPad")
5. Aaannnndddd it works, my phone got all the function back.
6. Oooo, I also overclock the Proc to 864mhz (using a solution from the neighbours forum)
7. I found out about yaffs2expert in the market.
8. Using yaffs tool I extract the system img from my backup files earlier
9. I remove the folder system and boot.img in the custom ROM that i got before and change it with my extracted folder from the extracted img and the backup boot.img too (the original backup boot.img was not extracted).
10. I compressed it using zip
11. Using recovery mod install the ROM that i have just build before.
12. And again it now back to its original (like new from the store) state of the device.
13. The proc is still OC to 864mhz.
Do what I have just done is a bad idea (customizing a moded ROM with my original ROM)????
Ok now I have a new problem, everytime I turn the wifi on the device is restarted, is there any solution??
Thanks,

[TUT] Install CWM on Micromax funbook pro p500

Hello guys I recently tried many recovery.img on Funbook pro and bricked it! but finally found 1 working CWM of Micromax funbook p300 that works on our tab too..!!
Source : http://forum.xda-developers.com/showthread.php?t=1702299
Things Required -
1. Data Connection on your Tablet. (via WIFI)
2. An archieve supported file manager. Eg ES File Explorer.
3. A Usable and working mind.
Steps -
1. Download the file from the link below. ( PLEASE READ BELOW BEFORE FLASHING)
2. Extract the file to the root of your "internal sd card" and you will get 2 file First "Novotools_v1.0" and the Second "recovery.img".
3. Install the app Novotools_v1.0.
4. Run Novotools and you will see and option Flash Recovery
5. Click it and the recovey will be flashed onto your phone.
6. Reboot in recovery with the help of the application.
7. Now you have fully functional CWM recovery. ( PLEASE READ BELOW BEFORE FLASHING )
BUT WAIT ARE U STUCK ON MMX LOGO? MAKE SURE YOU DOWNLOAD THE STOCK BACKUP GIVEN BELOW PLACE IT YOUR SD CARD BEFORE FLASHING CWM UNDER external sd card ie; ext sd clockworkmod\backup\
1) AFTER INSTALLING RECOVERY
2) DO A RESTORE OF THE GIVEN BACKUP
Download -
Recovery - http://www.mediafire.com/?6wn2dow0lz9qoot
Backup - http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Credits:-
Geno for Novotools v1.0
Developer of the Recovery.img
XDA community for all the information and resources.
All the thanks hitter for all the Motivation.
Disclaimer:-
The file is not a flashable zip. Do not try and flash it.
I am not responsible in any way of this makes you tablet unusable.
HIT THANKS if u like my work

Good
At last you found it

cool.gautam said:
Hello guys I recently tried many recovery.img on Funbook pro and bricked it! but finally found 1 working CWM of Micromax funbook p300 that works on our tab too..!!
Source : http://forum.xda-developers.com/showthread.php?t=1702299
Things Required -
1. Data Connection on your Tablet. (via WIFI)
2. An archieve supported file manager. Eg ES File Explorer.
3. A Usable and working mind.
Steps -
1. Download the file from the link below.
2. Extract the file to the root of your "internal sd card" and you will get 2 file First "Novotools_v1.0" and the Second "recovery.img".
3. Install the app Novotools_v1.0.
4. Run Novotools and you will see and option Flash Recovery
5. Click it and the recovey will be flashed onto your phone.
6. Reboot in recovery with the help of the application or the old method by Holding the Home/Options and the Power button.
7. Now you have fully functional CWM recovery.
Download -
http://www.mediafire.com/?6wn2dow0lz9qoot
Credits:-
Geno for Novotools v1.0
Developer of the Recovery.img
XDA community for all the information and resources.
All the thanks hitter for all the Motivation.
Disclaimer:-
The file is not a flashable zip. Do not try and flash it.
I am not responsible in any way of this makes you tablet unusable.
HIT THANKS if u like my work
Click to expand...
Click to collapse
Great stuff. I'll write this on my blog. Is there any chances of getting your devices bricked?

ujjwalk308 said:
Great stuff. I'll write this on my blog. Is there any chances of getting your devices bricked?
Click to expand...
Click to collapse
We need a tester to assure that! didn't brick mine

cool.gautam said:
We need a tester to assure that! didn't brick mine
Click to expand...
Click to collapse
Gautam, You should provide the link and tutorial of Livesuit with Chinese firmware in case of brick. so testers can take risk of trying this..
and as i know you and joby both are successfully installed CWM from Chinese ROM aren't you?
so as a suggestion please include that tutorial in this post just in case..
-Susheel

thatsgamer said:
Gautam, You should provide the link and tutorial of Livesuit with Chinese firmware in case of brick. so testers can take risk of trying this..
and as i know you and joby both are successfully installed CWM from Chinese ROM aren't you?
so as a suggestion please include that tutorial in this post just in case..
-Susheel
Click to expand...
Click to collapse
Will do buddy....!! New method is tried by one member at facebook so i think its working but still will create it!

Video of Rooting/CWM
Gautam do you have the video of CWM installation? Want to view before I go ahead with the process..

kirankowshik said:
Gautam do you have the video of CWM installation? Want to view before I go ahead with the process..
Click to expand...
Click to collapse
Nope....If u somehow brick the device! ( u wont if u follow my steps clearly)
then just follow my how to unbrick tutorial!

cool.gautam said:
Nope....If u somehow brick the device! ( u wont if u follow my steps clearly)
then just follow my how to unbrick tutorial!
Click to expand...
Click to collapse
Can you provide the unbrick tutorial link? http://forum.xda-developers.com/search.php?searchid=78222300 is not working.

+1

I have rooted my P500 by 'unlock root' methoed. can I install this CWM following above procedure. I have read in some post here, following installation method of P300, may result in some brick for P500. thanks in advance.

I have rooted P500 biu now I want to go back and flash original ROM. how to do ?

dsmas said:
I have rooted P500 biu now I want to go back and flash original ROM. how to do ?
Click to expand...
Click to collapse
Have u installed any custom rom? which ? There in only one
But if you simply rooted it nothing else! you are already on stock rom!

cool.gautam said:
Have u installed any custom rom? which ? There in only one
But if you simply rooted it nothing else! you are already on stock rom!
Click to expand...
Click to collapse
Thanks. there are 2 models of funbook p300 and p500. most of the posts are for p300 since p500 is relatively new. As you said it is stock rom but after rooting and with the help of romtoolbox pro, I have removed most of the applications including educative lessions. therefore I wish to have a device as it was given at the showroom.. I hope you got my point.

dsmas said:
Thanks. there are 2 models of funbook p300 and p500. most of the posts are for p300 since p500 is relatively new. As you said it is stock rom but after rooting and with the help of romtoolbox pro, I have removed most of the applications including educative lessions. therefore I wish to have a device as it was given at the showroom.. I hope you got my point.
Click to expand...
Click to collapse
Ohk...Currently we dont have full stock rom! but apps can be recovered! Just install CWM and restore backup provided by me!

Help Meee
i bricked my device then recovered it by using livesuit nd insallin de chinese firmware....nd then recovered the stock ROM....nw my wifi driver is not working....some one pls give me a stock FIRMWARE of Micromax funbook Pro....or some other compatible firmware.....

not working for me ! i downloaded the .zip file and extracted it in sd card(not externel i m talking about internet 8 gb) via pc aand i saw two files novotools.apk and recovery.img and i installed the apk and den clicked on flash recovery and after clicking on flash recovery below came flash recovery and nothing happened den i thought i must check and den clicked on reboot to recovery den also nothing happened ! so i switched off my tab and den went o recovery manually der it was android system recovery ! plzz help me !

i am stuck at funbook logo. please help. now it doesn't move further. please tell me the solutions for it!
Thanks!

yooray said:
i am stuck at funbook logo. please help. now it doesn't move further. please tell me the solutions for it!
Thanks!
Click to expand...
Click to collapse
Chill bro see how to unbrick funbook pro thread And follow the steps ! I also bricked my funbook pro but recovered it back if u need any help or u r stuck at any step just PM ME

Stock backup
cool.gautam said:
Hello guys I recently tried many recovery.img on Funbook pro and bricked it! but finally found 1 working CWM of Micromax funbook p300 that works on our tab too..!!
Source : http://forum.xda-developers.com/showthread.php?t=1702299
Things Required -
1. Data Connection on your Tablet. (via WIFI)
2. An archieve supported file manager. Eg ES File Explorer.
3. A Usable and working mind.
Steps -
1. Download the file from the link below. ( PLEASE READ BELOW BEFORE FLASHING)
2. Extract the file to the root of your "internal sd card" and you will get 2 file First "Novotools_v1.0" and the Second "recovery.img".
3. Install the app Novotools_v1.0.
4. Run Novotools and you will see and option Flash Recovery
5. Click it and the recovey will be flashed onto your phone.
6. Reboot in recovery with the help of the application.
7. Now you have fully functional CWM recovery. ( PLEASE READ BELOW BEFORE FLASHING )
BUT WAIT ARE U STUCK ON MMX LOGO? MAKE SURE YOU DOWNLOAD THE STOCK BACKUP GIVEN BELOW PLACE IT YOUR SD CARD BEFORE FLASHING CWM UNDER external sd card ie; ext sd clockworkmod\backup\
1) AFTER INSTALLING RECOVERY
2) DO A RESTORE OF THE GIVEN BACKUP
Download -
Recovery - http://www.mediafire.com/?6wn2dow0lz9qoot
Backup - http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Credits:-
Geno for Novotools v1.0
Developer of the Recovery.img
XDA community for all the information and resources.
All the thanks hitter for all the Motivation.
Disclaimer:-
The file is not a flashable zip. Do not try and flash it.
I am not responsible in any way of this makes you tablet unusable.
HIT THANKS if u like my work
Click to expand...
Click to collapse
did this stock backup files must always be there or I can delete this after installation of new rom

Root canvas 2 running on ics

WELL WITHOUT WASTING MUCH OF THE TIME IN RAMBLING LET US SIMPLY START THE TUTORIAL:HOW TO ROOT CANVAS 2 RUNNING ON / WITH ICS......WHICH IS AS SIMPLE AS PLAYING SNAKE AND LADDER.
ROOTING.....
first of all enable USB DEBUGGING in your phone.
now connect your phone to your pc.
slide down the notification bar and select'touch for other options'.
now select MEDIA DEVICE option from that menu.
THEN DOWNLOAD bin4ry rooting tool from here..
extract it to any folder and open that folder.
now open runme.bat file from there.
it looks like a green coloured command prompt.
now just press 1 and hit enter.
then it will take about 1-2 mins as it is coping files to your phone.
(during this process your phone may reboot several times.)
THEN AFTER SOME TIME YOU WILL SEE THAT YOUR PHONES SCREEN HAS LIT UP.
IT WILL ASK YOU TO ENTER ENCRYPTION PASSWORD AND THEN FULL RESTORE YOUR PHONE.
IF YOU HAVEN'T SET UP ANY ENCRYPTION PASSWORD THEN JUST SELECT FULL RESTORE.
then after completing the process it will say press any key to continue.
now close this tool and switch on your phone.
you will find an app named superuser in your phone phone.
INSTALLING CLOCKWORK RECOVERY.
DOWNLOAD CLOCKWORK MOD RECOVERY FROM HERE.
put that downloaded recovery file (image) in the root of your sd card i.e. outside any folders otherwise mobile uncle tools won't detect it.
install an app named mobile uncle tools. YOU CAN DOWNLOAD IT FROM HERE.
open it and select recovery update option.
it will look for recovery file in your phone and display the result.
from there click on the recovery file and then select yes.
this will flash clockwork recovery in your phone.
And with dis u r done wid al d procedure..
Cill out
Hit thanx if i helped

Link of bin4ry rooting tool- www.mediafire.com/?wadbxnnxa8kf4b4
Hit thx if i helped

Link of cwm recovery (already renamed to recovery.img)
www.mediafire.com/download/ued9c4iqn6cr086/recovery.img

Good one.
Thx...:thumbup:

Please help..
Hello Jatin, I have followed all the above steps carefully but still I'm unable to root my device. Please refer the following screenshots and help me as early as possible. Thanks in advance.

CM Punk said:
Hello Jatin, I have followed all the above steps carefully but still I'm unable to root my device. Please refer the following screenshots and help me as early as possible. Thanks in advance.
Click to expand...
Click to collapse
First thing that please do not quote the whole post especially the main one....as it simply makes the thread ugly.
when you ask any question in a particular thread it is obvious that you will be asking question related to that only...:cyclops:
AND REGARDING THE ERROR.....IT LOOKS AS THERE ARE MORE THAN ONE EMULATORS RUNNING AND IT IS GIVING ERROR BECAUSE OF IT.
DISCONNECT ALL OTHER REMOVABLE DEVICES CONNECTED WITH YOUR PC...
HAVE YOU FOLLOWED ALL THE STEPS AS DESCRIBED IN THE THREAD? AND DOWNLOADED ALL THE FILES FROM THIS THREAD ONLY??IF NOT SIMPLY DOWNLOAD THEM FROM HERE AND PLS FOLLOW ALL THE STEPS STRICTLY AS GIVEN IN THE POST..
TRY AND REPORT.
BEST OF LUCK.:good:

[email protected] said:
First thing that please do not quote the whole post especially the main one....as it simply makes the thread ugly.
when you ask any question in a particular thread it is obvious that you will be asking question related to that only...:cyclops:
AND REGARDING THE ERROR.....IT LOOKS AS THERE ARE MORE THAN ONE EMULATORS RUNNING AND IT IS GIVING ERROR BECAUSE OF IT.
DISCONNECT ALL OTHER REMOVABLE DEVICES CONNECTED WITH YOUR PC...
HAVE YOU FOLLOWED ALL THE STEPS AS DESCRIBED IN THE THREAD? AND DOWNLOADED ALL THE FILES FROM THIS THREAD ONLY??IF NOT SIMPLY DOWNLOAD THEM FROM HERE AND PLS FOLLOW ALL THE STEPS STRICTLY AS GIVEN IN THE POST..
TRY AND REPORT.
BEST OF LUCK.:good:
Click to expand...
Click to collapse
Thanks for the quick response.
What does more than one emulator means?
I don't have any other removable device connected to my pc, and yes, I downloaded all the files from this thread only. What else can I do? Where am I missing out?

CM Punk said:
Thanks for the quick response.
What does more than one emulator means?
I don't have any other removable device connected to my pc, and yes, I downloaded all the files from this thread only. What else can I do? Where am I missing out?
Click to expand...
Click to collapse
Emulator is a hardware or software used for duplication of behavior of main system to host system.
In short your pc is main system here and device is emulated system.
I think you should than turn on usb debugging and set device as media storage and try.
IF YOU ARE STILL UNABLE TO ROOT THEN TELL ME AND I HAVE ANOTHER METHOD FOR YOU.:beer: cheers.

[email protected] said:
Emulator is a hardware or software used for duplication of behavior of main system to host system.
In short your pc is main system here and device is emulated system.
I think you should than turn on usb debugging and set device as media storage and try.
IF YOU ARE STILL UNABLE TO ROOT THEN TELL ME AND I HAVE ANOTHER METHOD FOR YOU.:beer: cheers.
Click to expand...
Click to collapse
I was trying with usb debugging all the way through with media storage as default but still no success. What's the other method?

CM Punk said:
I was trying with usb debugging all the way through with media storage as default but still no success. What's the other method?
Click to expand...
Click to collapse
No just on usb debugging
And are you trying to run it as administrator?
Sent from my C1604 using XDA Premium 4 mobile app

icoolguy1995 said:
No just on usb debugging
And are you trying to run it as administrator?
Sent from my C1604 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope. I'm doing exactly as mentioned above.I even tried it on another os of windows 7 and another laptop too, but to no avail.

CM Punk said:
Nope. I'm doing exactly as mentioned above.I even tried it on another os of windows 7 and another laptop too, but to no avail.
Click to expand...
Click to collapse
So here comes the second method.
FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools
link: http://db.tt/3JhQmUWh
Password of sp flash [email protected]
2.recovery image
link: www.mediafire.com/download/2j9rlu41ksnz83z/recovery.zip
3.superuser binaries
link: download.chainfire.eu/310/SuperSU-v1.04.zip
Extract sp flash tools and recovery.zip to get recovery.img( .img is the file type)
open sp flash tools(run as administrator)
.
click on scatter loading option and browse for the file in that folder
where you have extracted flash tools.you will find a text file...select it.
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RECOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
close sp flash tools and disconnect ur fone from ur pc and put the battery back.
WITH THIS U HAVE FLASHED CLOCKWORK RECOVERY ON YOUR CANVAS 2.
place the superuser.zip file in your phone's sd card(prefferably internal)
but do not extract it.
now BOOT INTO CLOCKWORK RECOVERY MODE by holding power key+vol.up key+vol.down key.
select install zip from sd card
then choose zip from internal sd card(if you have placed it in internal sd or otherwise select choose zip from sd card)
select the above placed zip and flash it.....
go back and reboot system
AFTER REBOOTING YOU WILL FIND A SUPERUSER APP IN YOUR PHONE
THIS MEANS THAT YOUR PHONE HAS BEEN ROOTED
Hit thx...it wont cost u

[email protected] said:
So here comes the second method.
FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools
link: http://db.tt/3JhQmUWh
Password of sp flash [email protected]
2.recovery image
link: www.mediafire.com/download/2j9rlu41ksnz83z/recovery.zip
3.superuser binaries
link: download.chainfire.eu/310/SuperSU-v1.04.zip
Extract sp flash tools and recovery.zip to get recovery.img( .img is the file type)
open sp flash tools(run as administrator)
.
click on scatter loading option and browse for the file in that folder
where you have extracted flash tools.you will find a text file...select it.
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RECOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
close sp flash tools and disconnect ur fone from ur pc and put the battery back.
WITH THIS U HAVE FLASHED CLOCKWORK RECOVERY ON YOUR CANVAS 2.
place the superuser.zip file in your phone's sd card(prefferably internal)
but do not extract it.
now BOOT INTO CLOCKWORK RECOVERY MODE by holding power key+vol.up key+vol.down key.
select install zip from sd card
then choose zip from internal sd card(if you have placed it in internal sd or otherwise select choose zip from sd card)
select the above placed zip and flash it.....
go back and reboot system
AFTER REBOOTING YOU WILL FIND A SUPERUSER APP IN YOUR PHONE
THIS MEANS THAT YOUR PHONE HAS BEEN ROOTED
Hit thx...it wont cost u
Click to expand...
Click to collapse
I'm stuck at the point where I'm supposed to click the download option in the flash tool coz nothing is happening after that. A dialogue box pops up which reads "Not all images are correctly loaded which may cause boot up issue! Do you still want to go on downloading anyway?" And when I'm clicking on Yes, the download progress is remaining unmoved at 0%. plz help. Screenshot included.
EDIT : Looks like this method is for jellybean. I'm using stock ics.

I prefer you use binary4u method i think you are getting these error because when you were rooting a another device was connected or try to as admin
Sent from my C1604 using XDA Premium 4 mobile app

icoolguy1995 said:
I prefer you use binary4u method i think you are getting these error because when you were rooting a another device was connected or try to as admin
Sent from my C1604 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ya i also thought that this could be the reason but he told me that only one device is connected...that why i asked him to follow the method of rooting jellybean because it also works on ics.

CM Punk said:
I'm stuck at the point where I'm supposed to click the download option in the flash tool coz nothing is happening after that. A dialogue box pops up which reads "Not all images are correctly loaded which may cause boot up issue! Do you still want to go on downloading anyway?" And when I'm clicking on Yes, the download progress is remaining unmoved at 0%. plz help. Screenshot included.
EDIT : Looks like this method is for jellybean. I'm using stock ics.
Click to expand...
Click to collapse
YOUR PROBLEM IS SIMPLY THIS THAT PRE- LOADER DRIVERS FOR YOUR PHONE ARE NOT PROPERLY INSTALLED IN YOUR PC. That's why sp flash tools is unable to connect to your phone and flash recovery.and so there is no progress.
TO INSTALL PROPER DRIVERS GO TO THIS THREAD.
Link: http://forum.xda-developers.com/showthread.php?t=2370906
And i know that the method i suggested is to root jellybean but it works fine on ics also ( but you cannot root jellybean via ics method)
**After installing proper drivers try again the above mentioned method and it should work.
And regarding that message... it will always come because all the images required to flash a new firmware are not properly loaded.
Ignore it because you are after all not flashing a whole new firmware but simply recovery in your phone.
Best if luck.

[email protected] said:
YOUR PROBLEM IS SIMPLY THIS THAT PRE- LOADER DRIVERS FOR YOUR PHONE ARE NOT PROPERLY INSTALLED IN YOUR PC. That's why sp flash tools is unable to connect to your phone and flash recovery.and so there is no progress.
TO INSTALL PROPER DRIVERS GO TO THIS THREAD.
Link: http://forum.xda-developers.com/showthread.php?t=2370906
And i know that the method i suggested is to root jellybean but it works fine on ics also ( but you cannot root jellybean via ics method)
**After installing proper drivers try again the above mentioned method and it should work.
And regarding that message... it will always come because all the images required to flash a new firmware are not properly loaded.
Ignore it because you are after all not flashing a whole new firmware but simply recovery in your phone.
Best if luck.
Click to expand...
Click to collapse
I have already been into that link since even I thought that I'm having driver issues but my device is included under adb in device manager and when I tried to update the drivers, it said that the best drivers are already installed.
I'm lost in a limbo, don't know what to do.

CM Punk said:
I have already been into that link since even I thought that I'm having driver issues but my device is included under adb in device manager and when I tried to update the drivers, it said that the best drivers are already installed.
I'm lost in a limbo, don't know what to do.
Click to expand...
Click to collapse
Did you tried to run as admin

icoolguy1995 said:
Did you tried to run as admin
Click to expand...
Click to collapse
Yes.

CM Punk said:
Yes.
Click to expand...
Click to collapse
Ok My last suggestion.
Remove all the connected device(dongles, bluetooth device) from your comp except your mobile with Usb debugging on.
restart your comp.
now place it in C drive(just for caution) or if it was on C drive move it to another drive.
Now try to root if it doesn't root.
Try frameroot.
---------- Post added at 03:54 PM ---------- Previous post was at 03:49 PM ----------
icoolguy1995 said:
Ok My last suggestion.
Remove all the connected device(dongles, bluetooth device) from your comp except your mobile with Usb debugging on.
restart your comp.
now place it in C drive(just for caution) or if it was on C drive move it to another drive.
Now try to root if it doesn't root.
Try frameroot.
Click to expand...
Click to collapse
Another suggestion if the above method does not work.
Try with a different port or with different cable.

Karbonn Smart Tab 8 version 2 Root, Recovery,etc.

Warning: This thread is for Karbonn smart tab 8 version 2
Version 2 tablets can be identified by S/N: ST*********** ver 2 at the back panel of the device
Root on Karbonn ST-8 Ver 2:
DISCLAIMER: ROOTING YOUR TABLET WILL PROBABLY VOID YOUR WARRANTY FROM THE MANUFACTURER. IF YOU DO NOT WISH TO ACCEPT FAULT FOR ANY ADVERSE EFFECTS OF ROOTING, THEN DO NOT READ ANY FURTHER. HERE BE DRAGONS.
Click to expand...
Click to collapse
Rooting
Download the utoo-root-signed.zip from here and copy it to a microSD card (do NOT extract it)
Charge up the battery in your Karbonn ST-8_version2, Power Off and remove the charger cable.
Insert the microSD card into your tablet
Get into Recovery mode( Power+volume down ) .
In the recovery you can move with the Volume down button, you can select with Power or Volume up
Select the apply update from EXT option
Select the utoo-root-signed.zip, this will install the package
Wait for the update to finish
Select reboot system now
This is a tried and tested method and has worked for everyone till now.
Attached zip credit goes to xda user @Lannig
Lag-free Tweak
Install SetCPU app
Download the file Setcpu.txt from here
Paste it into the root of your SD Card
Open SetCPU, first change the governor from "conservative" to "performance2"(This is the most important thing)
Click on options button(three dots) and then click Device Selection
Select Custom Frequencies
Now Set Min frequency to 48 MHz and Max frequency to anything according to your preference(Now you'll have the choice of setting the frequency upto 1.5 GHz)
Note:
When you wan't to conserve more battery lower the Max Frequency(while browsing or listening to music maybe) and when playing HD games up the Max Frequency(Most games will run perfectly with even 1200 MHz)
48MHz of Min frequency will give more battery in in standby mode.
Try not to Clock the CPU above 1.2 GHz for a long time as it could cause heat issues. The governor itself should speedup everything for you.
Low Internal Memory
The fact that our devices have only 1.51 GB of Internal Storage limits the capabilities of our devices. Especially with HD Games.
I recommend using GL2SD for games at the moment.
Get used to using the app, its pretty easy..
Also SEE THIS
Battery Tips
Build.prop edits
hw.nophone=true(was false)
hw.hasdata=false(was commented out and true)
ro.carrier=wifi-only(was unknown)
wifi.supplicant_scan_interval=240(was commented out)
hw.hasethernet=false(was true)[ I dont use ethernet ]
I use Greenify a lot
Also i had
1)phone.apk and odex
2)telephony.apk and odex
I removed them ( to stop displaying of cell signal usage in battery stats )
Also for ppl who want to unbrick st8-v2
Get the stock firmware package from HERE
Get the amlogic flash tool from HERE or HERE
Follow the instructions for the flash tool using the instruction manual from HERE or HERE
See the above posts and remember...........do not do things blindly........read the details completely and understand and then implement
Press Thanks if I helped U..........cheers

Stock Karbonn ST-8 Ver 2
Karbonn ST-8 v2 Stock ROM Dump And Unbricking ur bricked tablet
For a complete dump head to :
Mirror 1 [Box.com]
Mirror 2 [Mediafire.com]
For ppl who have flashed wrong TWRP in a hurry SEE THIS
also attached to this post is the Stock Recovery for Karbonn ST-8 Ver 2
Press Thanks if I helped U..........cheers

TWRP ON ST-8 V2
1. TWRP Testing for interested ppl
2. Partially tested TWRP
Link1
Link2
Press Thanks if I helped U..........cheers

Reserved...

waiting for twrp

TWRP Recvoery For smart tab 8 ver 2 Stock flashable
The attached file contains TWRP for Smart tab8 ver2.
It is initial release so it contains many bugs.
As i'm very lazy to do so myself so, if u tell me i'll resolve the bugs accordingly.
AND PLEASE NOTE I Don't have the tab so u have to check the releases yourself. My friend needs the twrp because he screwed his tablet. So i just made one for him to recover his tablet Just As is basis.

fizzy177 said:
The attached file contains TWRP for Smart tab8 ver2.
It is initial release so it contains many bugs.
As i'm very lazy to do so myself so, if u tell me i'll resolve the bugs accordingly.
AND PLEASE NOTE I Don't have the tab so u have to check the releases yourself. My friend needs the twrp because he screwed his tablet. So i just made one for him to recover his tablet Just As is basis.
Click to expand...
Click to collapse
EDIT: ur zip dosent flash in stock recovery....i got the recovery.img from zip and flashed it using flash_image binary
1. TWRP menu is visible and can be navigated
2. All buttons working
3. Reboot and settings menu fully working
4. Backup and Restore working ( tried system and data backup )
5. Mount menu ....only external sdcard can be mounted
6. Advanced menu copy log to sd working ....terminal command and file manager not working( flickering of recovery -->slide to unlock then black out)
7. Didnt try install and wipe options

need help.. please, White screen boot
I had just received my 'smart tab 8 Ver 2' two days ago and i was trying to root and install fuser-invent custom rom in it.. one thing led to another and by the time i realized the firmware of ver1 is diff than ver 2, the damage was already done.. now my tab displays a white screen and nothing else.. it wont even boot into stock recovery. can some one please help me. :crying::crying:

Root.....Check!
Thanks for the Root dude! It worked Awesome!!
Now if only we can have the Custom bugless roms the V1 users have and then it would be an icing on the cake!
I'm prepared to help out in anyway to be able to experience that goodness!! :fingers-crossed:

I am also facing the same problem , but when i connect my tablet to pc it shows "M3 CHiP" a new hard ware found . But i dont know how to fix my tablet . i knows M3 chip is amlogic processor and AML flash tool can be used to flash it ( i found it from google) . Somebody please help me to fix my tablet .

UP

unbrick
Aviast11 said:
I am also facing the same problem , but when i connect my tablet to pc it shows "M3 CHiP" a new hard ware found . But i dont know how to fix my tablet . i knows M3 chip is amlogic processor and AML flash tool can be used to flash it ( i found it from google) . Somebody please help me to fix my tablet .
Click to expand...
Click to collapse
Steps to unbrick ur tab:
Unbrick st-8-V2
1. Download the above zip extract the above zip to the root of an empty sdcard. It should look like this
2. Put the sdcard in your tablet
3. Press Power+Volume down and let it update the tablet
for furthur assistance see this link
the method i mentioned is the first one,sdcard one ....report after ur trial so that it may help others...

2012katas said:
Steps to unbrick ur tab:
1. Download the above zip extract the above zip to the root of an empty sdcard. It should look like
2. Put the sdcard in your tablet
3. Press Power+Volume down and let it update the tablet
for furthur assistance see
the method i mentioned is the first one,sdcard one ....report after ur trial so that it may help others...
Click to expand...
Click to collapse
Hi
I tried the way u mentioned , but nothing happend , still its showing white screen.
the way i did is :-
1. extract the zip and put all files inside my SD card (same as the image u showed)
2. put SD card in my tablet and pressed vol down+power (i tried with all key combinations)
3. only white screen.
also i downloaded "usb image tool" but i dont have image file to load ..
please help me to fix my tablet.

i am a newbie, I wanted to know if there is any method to upgrade Smarttab ver-2 to android 4.2.2
I want to use multiple useraccount feature in 4.2.2
I have read the forum threads and it isnt quite clear if such an upgrade is possible and tested.

recovery
the above method aborted after starting update.please guide to recover my karbon velox smat tab 8 v2 .it is always booting to recovery screen.

unbricking st8 version2
nickrulez13789 said:
I had just received my 'smart tab 8 Ver 2' two days ago and i was trying to root and install fuser-invent custom rom in it.. one thing led to another and by the time i realized the firmware of ver1 is diff than ver 2, the damage was already done.. now my tab displays a white screen and nothing else.. it wont even boot into stock recovery. can some one please help me. :crying::crying:
Click to expand...
Click to collapse
Aviast11 said:
I am also facing the same problem , but when i connect my tablet to pc it shows "M3 CHiP" a new hard ware found . But i dont know how to fix my tablet . i knows M3 chip is amlogic processor and AML flash tool can be used to flash it ( i found it from google) . Somebody please help me to fix my tablet .
Click to expand...
Click to collapse
assipposi said:
the above method aborted after starting update.please guide to recover my karbon velox smat tab 8 v2 .it is always booting to recovery screen.
Click to expand...
Click to collapse
Ok guys,This the first and last time I am posting this....
To unbrick ur tab......
1. Post what u did
2. What is wrong with the tablet according to your understanding
If you want to be helped the above two points really matter........
3. See this link
4. All info about unbricking various types of bricks can be found on the thread....
5. Also i would suggest you go through the thread fully and understand every detail
6. Another alternative for you guys would be Karbonn service center, But I feel it is useless as they take minimum 30-45 days to repair things
7. The method i mentioned is the first one,sdcard one
At this moment we have an experimental unbrick package with us thanks to developer @fuser-invent
This package is to be used in the STEP 3 of SOFT BRICK UNBRICK SDCARD method
Step 3
This only works if the first method completed far enough to allow you into the Stock Recovery or if the Alternative Methods worked and you now need to install the correct firmware.
0. Restore your SD card back to normal capacity with the SD Formatter software. This can take a long time, be patient. Choose the following options:
- FORMAT TYPE -> FULL (Overwrite)
- FORMAT SIZE ADJUSTMENT -> ON
1. Get THIS firmware package
2. Download the above zip extract the above zip to the root of an empty sdcard( less than 2gb ). It should look like this all four files should be in the root of the sdcard.
3. Just FYI, the zip folder among those four files is the stock rom ( it has boot.img,bootloder.img,system,recovery.img,aml_logo.img,logo.img )
Also this package is a recovery package for soft bricks....
4. Put the sdcard in your tablet
5. Hold down the Power and Vol - buttons to enter the Stock Recovery
6. Flash your firmware package and reboot the tablet.
7. If it worked, either plug your tablet into the computer and use USB mode or shut down your tablet and remove the SD card, then remove the "u-boot.bin" and "uImage_recovery" files from your SD card.
8. Boot back into recovery and make sure that the firmware package correctly installed the Stock Recovery on your device.
Your tablet is now back to it's original Factory Settings.
6. For furthur assistance see this link
7. If you are successful plz report back...........it will help others

2012katas said:
Ok guys,This the first and last time I am posting this....
To unbrick ur tab......
1. Post what u did
2. What is wrong with the tablet according to your understanding
If you want to be helped the above two points really matter........
At this moment we have an experimental unbrick package with us thanks to developer @fuser-invent
1. Get THIS frimware package
2. Download the above zip extract the above zip to the root of an empty sdcard( less than 2gb ). It should look like this
3. Just FYI, the zip folder among those four files is the stock rom ( it has boot.img,bootloder.img,system,recovery.img,aml_logo.img,logo.img )
Also this package is a recovery package for soft bricks....
4. Put the sdcard in your tablet
5. Press Power+Volume down and let it update the tablet
6. For furthur assistance see this link
The method i mentioned is the first one,sdcard one ....report after ur trial so that it may help others...
7. All info about unbricking various types of bricks can be found on the thread....
8. Also i would suggest you go through the thread fully and understand every detail
9. If you are successful plz report back...........it will help others
10. Another alternative for you guys would be Karbonn service center, But I feel it is useless as they take minimum 30-45 days to repair things
Click to expand...
Click to collapse
As 2012katas said, it's very important to go to the thread he links in #6. Yes, it is a HUGE thread, but it is detailed for a reason. 99% of your questions will be answered in that thread.
For example, the thread clearly says to use the ELF2 rescue image and the USB image tool to prepare your card first, then delete the ELF2 files from it and replace them with the files for your tablet. It also says that if that doesn't work you can try the SD Formatter software with my suggested settings to try and prep your card. I have no idea if the package will work until someone tries it the correct way and reports back.
On another note. If it doesn't work the first time, try to delete the u-boot.bin file only and then try again. Also mentioned in the thread, some people need to press and hold the power and vol- buttons and then when the tablet starts lighting up, start pressing the power button repeatedly, but that is rare.
As for the people with deep bricked tablets (showing the M3/M6 chip), you don't have anything to loose at this point so you best bet is to download the ST10_20121129.zip package, remove the patch.zip and update.zip, put the ST8 v2 firmware package zip I made in that folder, edit the config_progress.xml so the firmware package name is correct and no longer called update.zip, delete the part for the patch.zip, renumber the remaining steps, zip the whole thing back up and load it into the AML USB Burning software.
That might work or it might not work. You have to intelligently experiment because there is no official release for the tablet. Also you will notice that in the unbricking thread I say that if you can get the tablet showing some signs of life after the M3/M6 chip deep brick, you can then move to the SD card method. So if the usb_spl.bin and u-boot-orig.bin for the ST10 work with the ST8 to at least get the tablet out of M3/M6 mode then you could use the SD card method.
Lastly, to 2012katas, I'm rarely on XDA so if you have more questions, I see them more often on DragonDevs. You seem into this Dev stuff and smart, so feel free to get in touch to troubleshoot more.

Awesome TAB
I love this tab...
Runs Asphalt 8 flawless on 1.5ghz OC'ed.............totally awesome no lags..
btw OC'ed for battery=100% to battery=6%
tablet heats up a little on back side...........but okay for gaming........

Hi All,
I accidentally flashed TWRP recovery before routing. On Karbon Smart tab 8 Ver 2
Now, I can't do any thing...
I tried factory reset it not working.
Also failed to get into fastboot mode...
Need help to go back and flash stock recovery..

if anyone have all he junks that is pre-installed in the tab, please upload.