[Q] ROM not booting! - HTC Inspire 4G

I have htc inspire. It was S-Off. I updated bootloader and the first line of "S-OFF" changed to "AAHK"... also recovery was changed to CWM. I did these both by flashing of a PD98IMG.zip file. Then I downloaded and installed FALLEN v4.9 Shinra...
Now, after the installation completed, I reboot my phone. I also tried to remove battery and reinsert it then reboot. But the result is same. The phone vibrates 3 time and orange notification light began to blink. Moreover, now phone also don't boot to hboot (or whatever)...
Sorry for my bad english, I hope you understand my problem... Thanks

Related

[Q] sensation stuck on white screen with htc green letters

I've made the s-off, installed clockwork, and got root, and I wanted to install a new rom. I downloaded InsertCoin Sense Android 2.3.4 STABLE 1.2, turned off the phone, installed from zip, and everything went ok.
But when I rebooted the phone it remained stuck on the white screen with the green htc letters!
I tryed to enter the bootloader, but I can't! It always starts the white screen!
Plz help!
EDIT: ok, I've found a way to access the bootloader again, in this post:
http://forum.xda-developers.com/showthread.php?t=1137311
where it says: "My Phone Died and i can't turn it back on!!!"

Please help I am so screwed! SBF Issue

So from the beginning: I SBF'd my phone back to stock a couple days ago and it was working fine. I was rooted bootstraped all that I tried to flash one of the Liberty roms and I was stuck at the liberty fist screen.
I figured the problem was I was on stock 2.3 or whatnot and I tried to flash back to 2.2. SBF again right? Well little did I know my battery was semi low and during the flash process my battery fell below the threshold and now it has an error message on the phone bootloader update screen that says "CODE INVALID."
When I try to SBF it with RSDLite and the 2.3.20 SBF file I get an error that says: Phone is not compatible with multi-interface superfile. (0x703B)
It also doesn't detect what kind of phone it is when I plug it in either. It just says phone[0000].
Am I totally screwed?
boot into recovery (shutdown or remove battery, put battery back into place, press Power+X on the keybroard) and do a full data wipe then reboot.

[Q] bricked after install CM9 on xperia S ?

Hello There!
Being anything but an expert I carefully read instructions on how to unlock my SONY XPERIA S (LT26i) as I wanted to install CM9. This worked, but installing cm9 I f...ed up.... All seemed to go well, but after the final boot nothing happened, the screen stayed black.
When I try to unzip the file with cm9 from root again I get: 'installation aborted', '(status 7)' and the anouncement that the zip.file has an error in it.
If I try to start in normal mode (after a hard reset) i get freexperia logo for a short while, then the small led turns purple (i think) and the bottom, bar lights up for a sec or two. Then everything turns black again...
The led turns red all right when i try fastboot mode, but my computer no longer recognizes the phone.
Help me please!
Hey,
flash a new firmware with fastboot (up volume key + start button) at boot
VincentKnife said:
Hello There!
Being anything but an expert I carefully read instructions on how to unlock my SONY XPERIA S (LT26i) as I wanted to install CM9. This worked, but installing cm9 I f...ed up.... All seemed to go well, but after the final boot nothing happened, the screen stayed black.
When I try to unzip the file with cm9 from root again I get: 'installation aborted', '(status 7)' and the anouncement that the zip.file has an error in it.
If I try to start in normal mode (after a hard reset) i get freexperia logo for a short while, then the small led turns purple (i think) and the bottom, bar lights up for a sec or two. Then everything turns black again...
The led turns red all right when i try fastboot mode, but my computer no longer recognizes the phone.
Help me please!
Click to expand...
Click to collapse
Hello!
I have an identical problem. Is there a working version of [FXP117_update-cm-9.0.0-RC0-nozomi-UNOFFICIAL-signed.zip]? There appears to be no access to the phone's SD storage, so how do i flash it?
Have you tried wiping/flashing new firmware from windows, using for example Fastboot Commander? Maybe this will work
I had similar promlem with CM9 on my xperia pro. I solved it with total reinstall of phone. so I wiped cache, Dalvik cache, factory reset (through Clockwork recovery), flashed stock kernel, then stock firmware..after I saw, that phone is working and my heart slowed back to normal, i did the same steps, but with CM9 kernel and CM9 ROM and it is working like charm now..

HTC Touch Pro2, Bootloader Crashed?

Hi and please help as right now I dont even have a backup phone.
I tried to install android on my phone by following the procedure from here
http://forum.xda-developers.com/showthread.php?t=1566955
I copied RHODIMG.NBH and CM7****.zip in the root of the SD card and restarted my phone with vol -, went into bootloader and installed successfully, since then my phone starts with official HTC screen and then goes black. I tried installing it again couple of times and it ended successfully but still no progress but something happened.
Current Status of the phone.
1. I can get in bootloader with vol- key but it keeps saying no image found where as I have tried putting different RHODIMG.NBH of different ROMs, even stock rom too but it just not read it.
2. Phone starts, shows HTC logo and then black screen.
3. I was running a custom ROM before with Hard-SPL bootloader, so its not stock SPL.
Please help, I would greatly appreciate....

stuck in the library need serious help. htc rezound stuck hboot,specific questions

here are the steps i've done so far. im trying to get my phone back on stock with the verizon htc rezound and its now stuck on the white screen and my computer is no longer recognizing my phone. plz help me.
here are the steps ive done so far..... here are my setting
TAMPERED
RELOCKED
vifor pvt ship S-on RL
Hboot-2.225.0000
radio-1.22.10.0421r,1.22.10.0424r
opendsp-v13.6.0.7611.00.0104
emmc-bot
apr 12 2012,16:47:46
fastboot.usb
vol up etc....
bootloader
roboot
reboot bootloader
power down
here is the update. when i went into the bootloader. i wiped everything clean then i went the ext sd card and went to install the ROM PH98IMG.zip , after doing so i received an error message inside the android logo. inside of the bootloader, i did the update and got an error message. then tried to install PH98IMG.zip ROM. and still got an error message. when i was in the reboot mode the white screen. the PH98IMG.zip popped up in green and it said no file or wrong file as it loaded up. then i went into the bootloader. i did the update and this message popped up
E.can't open /sdcard/update zip (no such file or directory)
then when i went to flash it, it said that there is no file. installation aborted.then i was told i need to lock the bootloader first. so i used hasoon2000 all in one htc toolkit and clicked on the command prompt to relock bootloader. once i did that i was stuck on the white screen and cannot get out of this bootloop. now the message up top is as it reads now. what can i do to get out of this loop.
additional steps ive done, ive taken the battery out and the ext sd card out and hit the power button numerous times. nothing. i also did a factory reset on the phone while in the white screen hoping that would kick it out of the bootloop, also nothing. plz help me. im at the library with no using internet here until i can get my phone up and running before work....i have been here for hours working on this, im at my witts end.
one more thing. when i do a fastboot reboot a green heading pops up saying PH98IMG.zip saying no image or wrong image if that helps at all and then fades off. if that helps at all.

Categories

Resources