Database Info

[Q] HELP! bricked what to do?

I tried going back to stock and this is the screen i get now... can anyone help me? I have tried just about everything...
Thanks

bays2112 said:
I tried going back to stock and this is the screen i get now... can anyone help me? I have tried just about everything...
Thanks
Click to expand...
Click to collapse
I think you put wrong pit and pda files during odin process...follow steps here how to odin back to stock...
Download all the files needed here:
http://forum.xda-developers.com/showthread.php?t=1116251
See video on Youtube how to get to download mode and how to odin back to stock:
http://www.youtube.com/watch?v=y1HgcZrYR_4

Try pulling battery
Replace battery
Hold the volume down button while plugging in a usb cable (already attached to computer) into the phone...
See if you can get into download mode
Were you using odin or heimdall to go back to stock?
Sent from my SAMSUNG-SGH-I997 using XDA

Is that a manual driver install? Im at work right now because i did download the kies software with drivers like months ago before this even happened. Odin will see it and it stops on setup connection...
Sent from my ZTE-Z990 using xda premium

bays2112 said:
Is that a manual driver install? Im at work right now because i did download the kies software with drivers like months ago before this even happened. Odin will see it and it stops on setup connection...
Sent from my ZTE-Z990 using xda premium
Click to expand...
Click to collapse
then try Hemiball if odin is not working. I remember somewhere that drivers are particular to the port you are using. With hemi if you are asked you might not see the driver the first time. click the dropdown and located from there

Samsung usb driver.
for Windows 32bit
for Windows 64bit
Your computer remove all samsung driver and kies, restart completed.
Install samsung usb driver and connecting usb test.

Had exact thing happen to me !!! not bricked!
as the others have said need to try and get it into dl mode! need a GOOD data cable "thats how i got that pretty screen" your data cable caused this issue odin says i see phone then all at once say just 7 seconds into update odin says ooopsie no phone. then when you go to redo poof you get that screen i freaked! turns out it was data cable!
you may need i think its called a "jig" if buttons wont allow you !
once you get that yellow triangle your good to go !

help!!!!!!!!!!!!!!!!!!!!!!

i was on ics but I planned to go back to gb my usb port had some problems so I had to put usb wire tightly to flash 2.3.6 firware from odin but it did not boot because it could not mount data that is I could not factory reset now the phne is not being recognized by the computer please is there a way of rooting from Samsung recovery so that I can go back to ics

http://forum.xda-developers.com/showthread.php?t=1822626
Heimdall>Odin

One heck of a sentence you had there!
Sent from my SGH-T959V using xda app-developers app

phone is not being recognised by the pc so how can i use heimdall

So can you not get into download mode?

I can get into the download mode but when I connect the phone there is no response from the computer

I've been trying to get people here to download mobile Odin lite and run it...send their file to chainfire so our device could get the support for it but....I guess they just don't understand what we are missing out on.
I've sent him what was asked for but if others wont jump in and do their part....I give up.
All he asks for is a .pit,a kernal,and the mobileodin.txt that is generated from the mobile Odin program

I think you need to connect your phone in download mode go into device manager and delete all the drivers under the USB section and try these steps
TwitchyEye said:
1. Go here and download heimdall suite.
https://github.com/Benjamin-Dobell/Heimdall/downloads
2. Extract and open drivers folder.
3. Connect your phone in download mode.
4. Run zadig and click show all devices, your phone should then show up in the list.
5. Click install drivers, it should say drivers successfully installed.
6. Try running the heimdall one-click of your choice.
7. Go back to step 3 and flash it again this time with bootloaders.
If it still fails, uninstall whatever USB drivers you have (one guy says he had to uninstall all of them, usually just the phone will do) reboot the pc and try again.
Actually you should go ahead and do this last thing first.
Godspeed
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse

Hi Carl
Did you open a thread for this?
I'm not sure it will be possible to odin straight to MTD.
sent from me

Shortbus-Driver said:
I've been trying to get people here to download mobile Odin lite and run it...send their file to chainfire so our device could get the support for it but....I guess they just don't understand what we are missing out on.
I've sent him what was asked for but if others wont jump in and do their part....I give up.
All he asks for is a .pit,a kernal,and the mobileodin.txt that is generated from the mobile Odin program
Click to expand...
Click to collapse
Why don't you do it? Lol jk. How do I do it though? And will it brick my phone?

itzik2sh said:
Hi Carl
Did you open a thread for this?
I'm not sure it will be possible to odin straight to MTD.
sent from me
Click to expand...
Click to collapse
No its in magda623 thread in general where he claims it works on his phone .
Its basically Odin on your phone so you can flash back to stock for what ever reason....whether returning back to bml from mtd or a soft brick etc. Without having to hook up to your computer.
Lol no it won't brick you it simply creates a txt file that you send to chain fire so he can see what he needs to do to make our device compatable.

[Q] Apx Device and USB device not found. Please help!

Ohkay I am trying to restore my g2x using oneclickrecovery. I successfully do all the steps until I click on flash stock rom. I'm the beginning, when my hold both volume up and down and plug it in to the computer it will not say Apx Device. It would say like USB device not installed. But then I follow the steps anyway and it says Nvidia boot for mobile devices then I take it out open oneclickrecovery then I select flash stock rom. There would be a blue window and it would say USB device not found. I would look at my phone it wouldn't say S/W upgrade.
Is there anyone who can resolve this problem? I need my phone back.

xnooeelx said:
Ohkay I am trying to restore my g2x using oneclickrecovery. I successfully do all the steps until I click on flash stock rom. I'm the beginning, when my hold both volume up and down and plug it in to the computer it will not say Apx Device. It would say like USB device not installed. But then I follow the steps anyway and it says Nvidia boot for mobile devices then I take it out open oneclickrecovery then I select flash stock rom. There would be a blue window and it would say USB device not found. I would look at my phone it wouldn't say S/W upgrade.
Is there anyone who can resolve this problem? I need my phone back.
Click to expand...
Click to collapse
I am assuming you have taken out the battery before the two button APX mode connect attempt. Try that if not. Also the first time you connect in APX mode you have to wait until driver install fails, then install the driver manually, then reconnect and it should work.
Sent from my HTC Amaze 4G using xda app-developers app

mansa_noob said:
I am assuming you have taken out the battery before the two button APX mode connect attempt. Try that if not. Also the first time you connect in APX mode you have to wait until driver install fails, then install the driver manually, then reconnect and it should work.
Sent from my HTC Amaze 4G using xda app-developers app
Click to expand...
Click to collapse
How do I manually install the driver?

[Completed] HELP me unbrick my GT-I9300

Hello xda members
I have an GT-I9300 device which stucks on TWRP Recovery (teamwin logo excatly) and flashes about after 4 or 5 seconds.
No twrp options , my pc doesnt react when i plug in my phone , only download mode available and an SD Card.
Can i unbrick my phone or not ?

Hello,
Yes, you can flash your stock firmware through Odin 3.10 and fix your device. Look in the thread linked below for instructions, if the download link for your stock firmware is dead then try going to Sammobile.com and search for your stock firmware using your model number GT-I9300, download it and then follow the instructions below.
http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Good luck.

styno said:
Hi,
you can recover the GT-I9300 completely with Samsung's own Kies. It will ask for the serial number of the phone and will download all files needed and flash it for you.
You'll end up with a complete stock phone (but with latest modem )
Good luck!
Click to expand...
Click to collapse
Kies and Odin dont recognize my device
Any other suggestions?

Edixh said:
Kies and Odin dont recognize my device
Any other suggestions?
Click to expand...
Click to collapse
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.

Droidriven said:
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Click to expand...
Click to collapse
Yes bro i have installed them so many times and restarted PC but nothing happens when i plug in my device

styno said:
Just to be sure: you used kies3 - emergency recovery and got the phone into download mode?
Click to expand...
Click to collapse
Yes but kies and also kies3 doesnt start the process .

TDizzle329 said:
Are you putting the device into download mode?
Power the device off (pull the battery, then put the battery back in), then hold VOL DOWN + HOME KEY + POWER KEY
Once in download mode plug into your PC. Also make sure that you have the Samsung drivers installed. Check your device manager on your PC to make sure Windows is seeing the device.
Click to expand...
Click to collapse
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also

Edixh said:
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Click to expand...
Click to collapse
Try different USB ports, make sure you have the stock cable.

[HELP]Galaxy Note 2(GT-N7100) bricked plz help!!

I was very excited about playing PUBG but found out that it isnt compatible. Since then I've been trying to find a way to run pubg on my phone.I found a post instructing to edit the build.prop file.....I changed the model number in it..still Play Store was showing it incompatible...so i replaced the entire build.prop file of my phone with that of a compatible phone(GalaxyJ7).The phone was working fine...but when I restarted it it wont boot up...stuck on boot logo...
I'm able to enter recovery and download mode.
It wont read any sd card so cant flash anything from there
Tried flashing using adb ..but am getting a error
Phone isnt being added to Odin neither to Heimdall even though I can see my device in Device Manager.
Plzzzzzzz Help....Will I have to use Jtag???????????:

ShubhamS156 said:
I was very excited about playing PUBG but found out that it isnt compatible. Since then I've been trying to find a way to run pubg on my phone.I found a post instructing to edit the build.prop file.....I changed the model number in it..still Play Store was showing it incompatible...so i replaced the entire build.prop file of my phone with that of a compatible phone(GalaxyJ7).The phone was working fine...but when I restarted it it wont boot up...stuck on boot logo...
I'm able to enter recovery and download mode.
It wont read any sd card so cant flash anything from there
Tried flashing using adb ..but am getting a error
Phone isnt being added to Odin neither to Heimdall even though I can see my device in Device Manager.
Plzzzzzzz Help....Will I have to use Jtag???????????:
Click to expand...
Click to collapse
Did you have USB debugging enabled in settings? If not, that may be why you can't get Odin to recognize your device.
Have you tried using the Samsung Kies or Smart Switch software to perform an emergency recovery?
Sent from my LGL84VL using Tapatalk

Droidriven said:
Did you have USB debugging enabled in settings? If not, that may be why you can't get Odin to recognize your device.
Have you tried using the Samsung Kies or Smart Switch software to perform an emergency recovery?
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Yes bro debugging was enabled..but never mind I solved the problem...my phone is working now...
I read somewhere that if Odin isn't recognizing your phone ...boot it in download mode connect USB and then remove the battery.... Still Odin didn't ..but my PC recognized the device (do you mind telling me the logic behind this?). Then I switched to Linux and did the same 'battery removal' thing on Heimdall ...and it detected my phone and I flashed Twrp successfully. Then flashed a new rom and its working perfectly now

Are you using SP Flash Tools
Sent from my [device_name] using XDA-Developers Legacy app

2ISAB said:
Are you using SP Flash Tools
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Sp Flash tools for what??

Nah bro..not using sp flash tool.
You too having the same problem