[Q] Have Problem after flash new Rom - ONE Q&A, Help & Troubleshooting

need help.. i try to flash Rom CM12 on my oneplus one but it didnt work and now my phone dont have any Rom. i already wipe the data on system,data and cache. what should i do?

eyepatch93 said:
need help.. i try to flash Rom CM12 on my oneplus one but it didnt work and now my phone dont have any Rom. i already wipe the data on system,data and cache. what should i do?
Click to expand...
Click to collapse
http://forum.xda-developers.com/one...olkit-wugs-bacon-root-toolkit-v1-0-0-t2947627
Read the post, install the driver as its tool and reinstall the COS 12 with this tool, easy and fast ..ricorda never to wipe system. Connect the cell to the PC and the tool does everything that you click, in this case follow the procedure to install the COS 12

Related

Galaxy Ace GT-S7500 CM 11.0: Is It Possible To Provide Backups?

is possible to provide cm11 backup?
Is possible to provide backups?
I'm asking this because the CyanogenMod 11.0 for GT-S7500 rom that i was using got corrupted and my clean backup too, so I was thinking if was possible to provide backups?
I also tried to re-flash but it got in to boot loop.
sorry for my bad english
Had you try to wipe data cache and dalvik ?? Do youe use TWRP or CWM ?
zyxw-androidiani said:
Had you try to wipe data cache and dalvik ?? Do youe use TWRP or CWM ?
Click to expand...
Click to collapse
i use twrp and yes i had wiped data cache and dalvik
put on your sd card the cm11, and wipe data, cache, dalvik, boot and system partition (deleting system and boot partition you will haven't no rom so no system) and re-flash the rom, or go on download mode flash stock rom and re-try.
zyxw-androidiani said:
put on your sd card the cm11, and wipe data, cache, dalvik, boot and system partition (deleting system and boot partition you will haven't no rom so no system) and re-flash the rom, or go on download mode flash stock rom and re-try.
Click to expand...
Click to collapse
sorry but i didn't understand what you say because i am not very good with english.
so i wipe data, cacha, dalvik , system and boot?but where is boot?
and what happens if it fails?
Do you speak italian ?
Sorry, "boot" option don't exist, go on recovery Wipe-->Advance wipe and select "Dalvik Cache", "System","Cache" and "Data". when you will delete them you will not have any thing on the phone just the download mode and recovery so you must flash a rom to boot up the phone, select the cm11 and flash it.
zyxw-androidiani said:
Do you speak italian ?
Sorry, "boot" option don't exist, go on recovery Wipe-->Advance wipe and select "Dalvik Cache", "System","Cache" and "Data". when you will delete them you will not have any thing on the phone just the download mode and recovery so you must flash a rom to boot up the phone, select the cm11 and flash it.
Click to expand...
Click to collapse
i don't speak italian
it didn't work, appeared a box saying something about superus
Click "don't install" or something like this go back and reboot, wait 5-10 minutes for the first boot. it's not possible that it didn't work, are you sure that you are making the correct steps for install a rom ?
First make the 4 wipe and after go back on the menu e and install the rom.
zyxw-androidiani said:
Click "don't install" or something like this go back and reboot, wait 5-10 minutes for the first boot. it's not possible that it didn't work, are you sure that you are making the correct steps for install a rom ?
First make the 4 wipe and after go back on the menu e and install the rom.
Click to expand...
Click to collapse
i followed this video:
youtube.com/watch?v=ix7rrKS4keI
yes follow this guide you must resolve else flash the stock rom via odin follow the guide in the forum.
zyxw-androidiani said:
yes follow this guide you must resolve else flash the stock rom via odin follow the guide in the forum.
Click to expand...
Click to collapse
i couldn't find the stock rom.
can you link the stock rom?
follow this guide http://forum.xda-developers.com/showthread.php?t=2563607 you will find the stock rom and how to flash it first see which variant you have GT-S7500, GT-S7500L or GT-S7500W

can't revert back after cm14

I had installed cm14 but now when I try to install any other ROM it installs but It is bootlooped. I have tried to full wipe but it doesn't work... Someone help.
Arcade said:
I had installed cm14 but now when I try to install any other ROM it installs but It is bootlooped. I have tried to full wipe but it doesn't work... Someone help.
Click to expand...
Click to collapse
First of all try to install stock firmware using fastboot and then install ROM
Arcade said:
I had installed cm14 but now when I try to install any other ROM it installs but It is bootlooped. I have tried to full wipe but it doesn't work... Someone help.
Click to expand...
Click to collapse
did u do a advanced clean wipe? system, data, internal storage, cache and dalvik . also u should be on the latest twrp check the build number not the upload date on the forum.
valkaizer2594 said:
did u do a advanced clean wipe? system, data, internal storage, cache and dalvik . also u should be on the latest twrp check the build number not the upload date on the forum.
Click to expand...
Click to collapse
Thats what was causing problem I dont know why but when I tried to clean install it didnt worked then I flashed cm14 again it did boot up then I flashed cm13 it also boot usp without clean flash... Thanks for your help

Moto G5 | Constant TWRP Recovery Loop |

So today, I came into this issue.
I've had flashed ROM on my device(s) for awhile, and today I have completely lost any hope and knowledge I had of my device.
I came across, TWRP saying no OS, then being unable to mount to system/ and mount data/
Now I have managed to flash a custom ROM on it, and flash the GAPPS but still, I get booting into TWRP Recovery.
Help?
Try wipe cache & dalvick in twrp then flash stock ROM, sometimes it work for me i hope this work for you too.give it try my friends
armuttaqin said:
Try wipe cache & dalvick in twrp then flash stock ROM, sometimes it work for me i hope this work for you too.give it try my friends
Click to expand...
Click to collapse
Can you link me to the stock ROM please.
imLiamMacdonald said:
Can you link me to the stock ROM please.
Click to expand...
Click to collapse
Try this and follow the instruction http://www.stechguide.com/download-stock-firmware-of-moto-g5/ DWYOR

How to perform a clean install?

How to do a clean install(no rom installed just recovery)? I want to format everything and flash my rom thru otg. Shud I wipe everything when I boot to recovery?
I think internal storage is the correct option then though it also removes all media on the device. Otherwise clear system, data, cache, bootloader, dalvik. Then install the rom from external source.
Should I flash from fastboot the recovery(twrp)? It might get wiped once the wipe everything.
I have same doubts....
Mord0rr said:
I have same doubts....
Click to expand...
Click to collapse
So do I... You necro'd a 8 month old thread...
I tried to go through few thereds however I was unable to find an answer.
I'm still on 5.11 oreo a d official TWRP. I would like to update to newest pie, however I would go for clean flash.
How should I do it?
I already backed up all app+ data using titanium.
Should I just go to TWRP
1. Factory default
2. Wipe all
3. Wipe system. Data, davlik and cache
4 flash latest pie and don't reboot
5 reboot to twrp
6 flash twrp
7 reboot to TWRP and flash magisk
It it right?
Thank you
netgar said:
I tried to go through few thereds however I was unable to find an answer.
I'm still on 5.11 oreo a d official TWRP. I would like to update to newest pie, however I would go for clean flash.
How should I do it?
I already backed up all app+ data using titanium.
Should I just go to TWRP
1. Factory default
2. Wipe all
3. Wipe system. Data, davlik and cache
4 flash latest pie and don't reboot
5 reboot to twrp
6 flash twrp
7 reboot to TWRP and flash magisk
It it right?
Thank you
Click to expand...
Click to collapse
Swap 5 and 6
Flashing this phone looks like sorcery....
Miss all days we could go to TWRP, erase all **** and then just flash rom. Period.
Now, doing this can even brick the dam phone.
It sucks!
EDIT*
Did Nuke 9.0.5 and install fresh 9.0.3.:angel:
Mord0rr said:
Flashing this phone looks like sorcery....
Miss all days we could go to TWRP, erase all **** and then just flash rom. Period.
Now, doing this can even brick the dam phone.
It sucks!
EDIT*
Did Nuke 9.0.5 and install fresh 9.0.3.:angel:
Click to expand...
Click to collapse
That also happened to me. I do not know how to go to another custom ROM from another custom ROM without going to MsmDownloadToolV4 to unbrick my device. Actually i did unbrick my device twice already because of trying various custom ROM.
Also, is there a way to just restore from recovery then flash another custom ROM. Then if we want to change custom ROM again we can just restore from recovery again then flash another custom ROM?
Please help us guys. Thanks.

twrp bootloop

Hi,
after pitchblack test I have softbriqued my poco.
I used miflash pro for reinstall and everything was good.
but, after unlock again my phone, flash the recovery, (everything was good at this time) flash my rom, the rom doesn't want to boot.
I tried many rom , change the twrp, nothing.
If anaybody have a solution for this issue, you're welcome.
Thanks a lot.
may be flash again with MIFLASH(clean all ) and go to the end of the configuration and check if everything is good .
https://xiaomiflashtool.com/
have you done...
format data in TWRP after flash TWRP and before install ROM again?
best TWRP for me...
recovery-TWRP-3.4.2B-0623-REDMI_K30PRO-CN-wzsx150
start twrp, only via fastboot with my rom version xiaomi.eu_multi_HMK30Pro_20.10.16_v12-11
Thanks for your response.
I've got a first issue with miflash, but the second time was good.
I don't know why it was impossible to connect with fastboot! That's the game of flashing..
I forgot one thing during my flashing session.. : after unlock my bootloader, and reflash a new rom, I didn't set pattern password...... It was the issue!
edit: after miflash session I could repare my phone to stock global. But after this I want to change my rom, and the twrp bootloop became.really strange.
This morning I use miflashtools another time and I keep this version of miui.
I don't know why it impossible to reinstall another rom after complete miflafh process!
Always and always back in recovery, each time!
Lethalben said:
I don't know why it impossible to reinstall another rom after complete miflafh process!
Always and always back in recovery, each time!
Click to expand...
Click to collapse
Can you describe precisely how you proceed to install the rom and which twrp are you using?
NOSS8 said:
Can you describe precisely how you proceed to install the rom and which twrp are you using?
Click to expand...
Click to collapse
Twrp used: all! China twrp 0328, and maunofrio
Install rom: format data, always, reboot to recovery, always, flash, succeed, done.
Wipe cache dalvik.
Reboot, and it became to twrp.
With my Poco, I flashed maybe 30 or 40 times for test some roms.
But since I tested pitch-black twrp everything gone wrong!
Lethalben said:
Twrp used: all! China twrp 0328, and maunofrio
Install rom: format data, always, reboot to recovery, always, flash, succeed, done.
Wipe cache dalvik.
Reboot, and it became to twrp.
With my Poco, I flashed maybe 30 or 40 times for test some roms.
But since I tested pitch-black twrp everything gone wrong!
Click to expand...
Click to collapse
Which rom do you want to install?
NOSS8 said:
Which rom do you want to install?
Click to expand...
Click to collapse
Mmx 12.0.8.0.
I've not tried xiaomi.eu, maybe I could do it.
Lethalben said:
Mmx 12.0.8.0.
I've not tried xiaomi.eu, maybe I could do it.
Click to expand...
Click to collapse
So you must flash miui V12.0.3.0.QJKMIXM with miflash. (no need to configure it just restart in fasboot and install trwp chinesse)
format data(if red lignes reboot twrp format again)->reboot twrp flash MMX rom, format data->reboot system
(do not use WIPE).
NOSS8 said:
So you must flash miui V12.0.3.0.QJKMIXM with miflash. (no need to configure it just restart in fasboot and install trwp chinesse)
format data(if red lignes reboot twrp format again)->reboot twrp flash MMX rom, format data->reboot system
(do not use WIPE).
Click to expand...
Click to collapse
That's what I did!
I'm on stock 12.0.3.0 now, with maunofrio twrp. I tested with chinese to.
I can root the rom, use magisk as well.
I did may be, 3 or 4 miflash for flash stock rom.,and always the same issue.
When I flash I haven't any issues with redlines, everything gone fine.
With stock its OK, with custom not.
Lethalben said:
That's what I did!
.
Click to expand...
Click to collapse
No you forget to format after install mmx rom and you wipe Wipe cache dalvik.
Dont use magisk.
NOSS8 said:
No you forget to format after install mmx rom and you wipe Wipe cache dalvik.
Dont use magisk.
Click to expand...
Click to collapse
I didn't do that ever! I format before flash, never after! And it worked.
Lethalben said:
I didn't do that ever! I format before flash, never after! And it worked.
Click to expand...
Click to collapse
But now it's not working so format data before and after.
NOSS8 said:
But now it's not working so format data before and after.
Click to expand...
Click to collapse
Thanks for your help mate!
It's just incredible and I don't understand why I need to format data after install now!
One month ago, wipe cache dalvik was enough to launch boot!
Big up!
https://forum.xda-developers.com/poco-f2-pro/how-to/pitchblack-recovery-project-oneos-t4189133

Categories

Resources