Hello,
When i install "YNG1TAS1L7" with fastboot, the wifi work great, but when i install "YNG1TAS2L3" with OTA/fastboot/manualy the wifi dont want to connect, what can i do ?
PS: i'm french, sorry for my bad english :/
BiggPoppa said:
Hello,
When i install "YNG1TAS1L7" with fastboot, the wifi work great, but when i install "YNG1TAS2L3" with OTA/fastboot/manualy the wifi dont want to connect, what can i do ?
PS: i'm french, sorry for my bad english :/
Click to expand...
Click to collapse
Have you tried to download the whole ROM and reflash it to see what happens? :silly:
Same problem here. I flashed the whole ROM because I used a custom kernel and couldn't update. Very annoying... should've stayed with the old kernel of bauner :/
6875727a said:
Same problem here. I flashed the whole ROM because I used a custom kernel and couldn't update. Very annoying... should've stayed with the old kernel of bauner :/
Click to expand...
Click to collapse
Flash it complety with fastboot, Persist.img , boot.img etc. All of it .... or try to flash The right modem via fastboot ...it will fixed the problems?
I had 1L7, with proximity problems, and that is the radio. Then I flashed the radio only again with fastboot, proximity problems over.
Then, I flashed the whole 2L3 with twrp.
If I remember well, the radio was skipped during the flash.
Just flashing the radio with fastboot may solve your problem.
Related
Help i just flashed new radio but when i try to turn it on it goes up to the screen that says htc magic and reboots itself and does it again
i can access recover but it reboots too after a few seconds ><
helppppppppp
also i can enter fastboot no problem what do i do D:
boot into fast boot and follow http://forum.xda-developers.com/showthread.php?t=605239
wait do i have to change my rom all at once as well?
because i did have a old radio rom on it and i flashed the new radio while still using that rom
so if i flash a new radio rom will it work fine?
yeah your old rom wont work on the new one, so you need to change rom too
so if i change it all will be well?
and can i have the download link for cursorsense 32A
http://www.theandroidkitchen.com/fileshare/CursorSense/?download=CursorSense32A-1.2.4-signed.zip
thats the rom but check his post first: http://forum.xda-developers.com/showthread.php?t=592856
be sure to have the right recovery too
hey yeh thanks for the help i think i got it
hope it works for you
oh yeh one more thing
i just put the 1.2.4 rom on because it said that it needs that before the 1.2.6.1
so for that one do i just flash without wiping?
Yes wipe before CS 1.2.4... then you update to 1.2.6 without wiping since it's a incremental update.
ok thanks =D
capychimp said:
boot into fast boot and follow forum.xda-/showthread.php?t=605239[/url]
Click to expand...
Click to collapse
hey i've did the exact same thing yesterday and flashed a new radio but apparently had the wrong recovery img, anyway am stuck in a boot loop, can't get to fastboot..... any help please
Dragon365 said:
ok thanks =D
Click to expand...
Click to collapse
glad you got it working
Hello all I installed the MIUIzero custom rom (http://forum.xda-developers.com/showthread.php?t=2016648), everything works fine except for the WIFI. I can't seem to turn it on, It gets stuck at "Turning Wi-Fi on". Any idea whats wrong?
x4nth3r said:
Hello all I installed the MIUIzero custom rom (http://forum.xda-developers.com/showthread.php?t=2016648), everything works fine except for the WIFI. I can't seem to turn it on, It gets stuck at "Turning Wi-Fi on". Any idea whats wrong?
Click to expand...
Click to collapse
Try downgrading/upgrading your radio or try another custom ROM, but seems to me it's a ROM issue.
x4nth3r said:
Hello all I installed the MIUIzero custom rom (http://forum.xda-developers.com/showthread.php?t=2016648), everything works fine except for the WIFI. I can't seem to turn it on, It gets stuck at "Turning Wi-Fi on". Any idea whats wrong?
Click to expand...
Click to collapse
The kernel, that is what is wrong.
olysmen said:
The kernel, that is what is wrong.
Click to expand...
Click to collapse
Can you recommend me a kernel to use with this ROM please?
I solved the problem, thanks for the help guys. The problem was not with ROM or kernel, it was me.
I was installing the rom using S-ON method so I pushed the wrong boot.img at the last part. Pushed the MIUI rom boot.img instead of the kernel's.
x4nth3r said:
Can you recommend me a kernel to use with this ROM please?
Click to expand...
Click to collapse
You should use the kernel that has been given to you by the developer, you can find it in the download section. This is it http://d-h.st/jm8
If your phone is s-on you cant flash kernels in recovery, but you can flash it with adb.
x4nth3r said:
I solved the problem, thanks for the help guys. The problem was not with ROM or kernel, it was me.
I was installing the rom using S-ON method so I pushed the wrong boot.img at the last part. Pushed the MIUI rom boot.img instead of the kernel's.
Click to expand...
Click to collapse
I see that you caused the problem, but the problem was the kernel. Next time be more careful at what are you doing.
The Kernel is completely working. But he had S-ON, so had to flash via recovery.
-adb flash boot boot.img
Constantly said:
The Kernel is completely working. But he had S-ON, so had to flash via recovery.
-adb flash boot boot.img
Click to expand...
Click to collapse
When you are s-on you can not flash via recovery, you must flash via fastboot but NEXT recovery supports smart flash for some devices, and if you activate it you can flash kernels even with s-on.
Do you know what kind of recovery is that can flash kernel directly?
Sent from my HTC Desire S using xda premium
petrevirgil said:
Do you know what kind of recovery is that can flash kernel directly?
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
If you are S-OFF you can flash kernels with all of them. If you are S-ON, you have 4EXT recovery for some phones with smart flash but I think Desire S is not supported. The easiest way to flash kernels with S-ON is with adb. Just extract the boot.img file from the kernel to the ADB folder and with the command : fastboot flash boot boot.img you flash it to the phone. If you don`t know how to use adb read the forum.
Hello,
I've only had this phone and recently, What ever rom im run after turing WiFi off whenever i try to turn it back on it does not and the toggle sticks on off and had the words turning on WiFi.
This problem was common in my previous phone as we had no wifi in 4.3 or 4.2.
Thanks
LaputaCake said:
Hello,
I've only had this phone and recently, What ever rom im run after turing WiFi off whenever i try to turn it back on it does not and the toggle sticks on off and had the words turning on WiFi.
This problem was common in my previous phone as we had no wifi in 4.3 or 4.2.
Thanks
Click to expand...
Click to collapse
Same hapenning with me , i think before a month i tried an CM Rom the wifi become not working till now , and i tried different ROMs , now iam using ViperS5.0.0 still have problem .
Jwtiyar said:
Same hapenning with me , i think before a month i tried an CM Rom the wifi become not working till now , and i tried different ROMs , now iam using ViperS5.0.0 still have problem .
Click to expand...
Click to collapse
Im gonna flash flash viper sense 4 now
LaputaCake said:
Im gonna flash flash viper sense 4 now
Click to expand...
Click to collapse
Tell me if worked for you.
Sent from my HTC One using Tapatalk
Jwtiyar said:
Tell me if worked for you.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Hi
same situation with my Sensation
Hapend when moved from Viper S ROM version 3.1.3 to 3.1.4 via update.
Lost WIFI and now I can't turn it on.
Check wipe&full installation, update, I was try 3.1.4 again and 5.0.0.
Without result
regards,
R.
---
Problem with WIFI solved!!!
I was happend (I guess) because we all have S-ON. So, we need to flashing a boot.img when it change with roms (or roms update)
And there is solution. Flash yours boot.img or do it when you install new rom (or reinstall current).
First way is in this post
I was use fastboot command.
Other way you should update yours recovery to newest 4EXT recovery and enable 4EXT smartflash, then istall rom (I choose Viper S/C 3.1.4).
I choose first one, becasue after second on device didn't start (it was rebooting again and again), so then I was use fastboot command.
And.... WIFI is back
And permanent solution for future - ofcourse permanent smartflash.
r66r66 said:
Hi
same situation with my Sensation
Hapend when moved from Viper S ROM version 3.1.3 to 3.1.4 via update.
Lost WIFI and now I can't turn it on.
Check wipe&full installation, update, I was try 3.1.4 again and 5.0.0.
Without result
regards,
R.
---
Problem with WIFI solved!!!
I was happend (I guess) because we all have S-ON. So, we need to flashing a boot.img when it change with roms (or roms update)
And there is solution. Flash yours boot.img or do it when you install new rom (or reinstall current).
First way is in this post
I was use fastboot command.
Other way you should update yours recovery to newest 4EXT recovery and enable 4EXT smartflash, then istall rom (I choose Viper S/C 3.1.4).
I choose first one, becasue after second on device didn't start (it was rebooting again and again), so then I was use fastboot command.
And.... WIFI is back
And permanent solution for future - ofcourse permanent smartflash.
Click to expand...
Click to collapse
iam s-off
Jwtiyar said:
iam s-off
Click to expand...
Click to collapse
ok, so maybe it's other reason. But please try my solution, it's just few minutes and maybe it will help.:good:
R.
r66r66 said:
ok, so maybe it's other reason. But please try my solution, it's just few minutes and maybe it will help.:good:
R.
Click to expand...
Click to collapse
thank you but really i dont understand clearly.
Jwtiyar said:
thank you but really i dont understand clearly.
Click to expand...
Click to collapse
you don't have nothing to lose
just flash the boot.img via fastboot command and see how it goes
rzr86 said:
you don't have nothing to lose
just flash the boot.img via fastboot command and see how it goes
Click to expand...
Click to collapse
thanks , i did it but didn't work .
Jwtiyar said:
thanks , i did it but didn't work .
Click to expand...
Click to collapse
try this
go to system->etc->wifi and delete the wpa_supplicant.conf file
reboot
first back it up in your sdcard just in case
rzr86 said:
try this
go to system->etc->wifi and delete the wpa_supplicant.conf file
reboot
first back it up in your sdcard just in case
Click to expand...
Click to collapse
thanks for reply .
not worked
Moto G dual sim. I flashing many roms, kernels, more and more more more wiping on cwm, twrp and etc...and all was well.
and once...I got bricking wi-fi.
please gyus help me, I do not know what to do ((crying:
sorry for my bad english (
MadL1fe said:
Moto G dual sim. I flashing many roms, kernels, more and more more more wiping on cwm, twrp and etc...and all was well.
and once...I got bricking wi-fi.
please gyus help me, I do not know what to do ((crying:
sorry for my bad english (
Click to expand...
Click to collapse
you dont have a backup? if dont, tell us what rom are you using now, maybe somebody will help you
woozie.2007 said:
you dont have a backup? if dont, tell us what rom are you using now, maybe somebody will help you
Click to expand...
Click to collapse
i flashing stock 4.4.2 asia, 4.4.4...GB...GPE...not work. Now 4.4.4 stock asia
MadL1fe said:
i flashing stock 4.4.2 asia, 4.4.4...GB...GPE...not work. Now 4.4.4 stock asia
Click to expand...
Click to collapse
try to flash this kernel for asia dual sim https://www.androidfilehost.com/?fid=23329332407575370 maybe help you, if dont try to flash stock asia retail dual sim 4.4.4 or 4.4.2 ,not gb or gpe
or try this http://forum.xda-developers.com/moto-g/general/stock-official-asia-retail-t2854523
It did not help the kernel(
I have a lot of time flashing 4.4.2 and 4.4.4...not work :crying::crying::crying:
MadL1fe said:
It did not help the kernel(
I have a lot of time flashing 4.4.2 and 4.4.4...not work :crying::crying::crying:
Click to expand...
Click to collapse
try this modules https://www.androidfilehost.com/?fid=23501681358555053
it works for me
installed...not work (
MadL1fe said:
how to install this? replace with file manager?
Click to expand...
Click to collapse
flash from recovery
woozie.2007 said:
flash from recovery
Click to expand...
Click to collapse
installed...not work
MadL1fe said:
installed...not work
Click to expand...
Click to collapse
you cant turn on the wi-fi? wipe cache and dalvik? wipe before flash and after, maybe helps
woozie.2007 said:
you cant turn on the wi-fi?
Click to expand...
Click to collapse
yes, try to move the slider and nothing...
before trying to put http://forum.xda-developers.com/mot...2-miuiv-motorola-moto-g-t2860885/page20...all i wiped all on cwm...modem,fsg,firmware,data,system, persist and etc...flash stock and this problem
MadL1fe said:
yes, try to move the slider and nothing...
before this i wiped all on cwm...modem,fsg,firmware,data,system, persist and etc...can this problem?
before trying to put http://forum.xda-developers.com/mot...2-miuiv-motorola-moto-g-t2860885/page20...all wiped...flashing stock and got this problem
Click to expand...
Click to collapse
i am not an expert, but when i have this problem too, i flashed this stock modules and the problem was solved, i have stock rom asia retail dual sim, maybe you must flash the stock rom, i dont have more ideas, somebody will help you, im sure
MadL1fe said:
yes, try to move the slider and nothing...
before trying to put http://forum.xda-developers.com/mot...2-miuiv-motorola-moto-g-t2860885/page20...all i wiped all on cwm...modem,fsg,firmware,data,system, persist and etc...flash stock and this problem
Click to expand...
Click to collapse
Anther very good example of our Indian friends, that got no idea what they are doing.....
Go to a service centre, pay and get it fixed, srsly.
woozie.2007 said:
i am not an expert, but when i have this problem too, i flashed this stock modules and the problem was solved, i have stock rom asia retail dual sim, maybe you must flash the stock rom, i dont have more ideas, somebody will help you, im sure
Click to expand...
Click to collapse
Thank you very much for your help, if there are more ideas - write...
I will try to do something....what's the problem, do not understa:crying:nd
HEEEELP ME :'(
i understand...i format modem (fsg?) on cwm, no?...wi-fi is broken...how to fix :'(
Wiping /persist was not a good idea. No guide on this forum will tell you to do that.
Can you make calls? Do you have an IMEI?
lost101 said:
Wiping /persist was not a good idea. Can you make calls? Do you have an IMEI?
Click to expand...
Click to collapse
i can make calls ! have imei on box
Try flashing this zip in Custom Recovery:
http://forum.xda-developers.com/showthread.php?p=54946199
If that doesn't help, set up fastboot and flash the retail Asia 4.4.4 firmware image.
Guide:
http://forum.xda-developers.com/showthread.php?p=47820707
EDIT: One of the custom Kernels (that supports Stock ROM and XT1033) might solve this.
now try to
I found the solution!
Copy in to persist folder that file
thx all guys!
MadL1fe said:
I found the solution!
Copy in to persist folder that file
thx all guys!
Click to expand...
Click to collapse
hello I am having the same problem as you have .. explain further ..
Hello, I have a xt925 with KK stock, and before I do s##it my recovery with CWM 6.0.4.4 worked normally
But as I am idiot I tryed to install philz advanced recovery... Ok installed sucessfull... After I tryed to back to my CWM 6.0.4.4 and now I can't open recovery and install any recovery because on promt show me (Variable not supported)...
Can anyone help me ? How will I get my recovery back ?
I have root, I have bootloader unlocked I have everything or almost everything .... please help me
Have you installed the correct version accordingly to your device/BL?
Sent from my Razr HD, Unlocked KKBL, latest CyanogenMod CM11 KK 4.4.4 ROM, ART runtime.
RMarques said:
Have you installed the correct version accordingly to your device/BL?
Sent from my Razr HD, Unlocked KKBL, latest CyanogenMod CM11 KK 4.4.4 ROM, ART runtime.
Click to expand...
Click to collapse
Yes... I know how to do it, the same CWM I installed before I install the philz didn't work
@edit : I did the download of the last version of minimal adb and fastboot, but it didn't work... and my boot loader is already unlocked when I run "fastboot oem unlock" blablabla....
I dont know why I'm not getting to install cwm if I already had it installed
I tryed with mfastboot and erase recovery and flash recovery...
Ican't erase with sucesfull, but I got to flash a new CWM but... When I tryed to acess her my boot logo stay freezed
RaR System said:
I tryed with mfastboot and erase recovery and flash recovery...
Ican't erase with sucesfull, but I got to flash a new CWM but... When I tryed to acess her my boot logo stay freezed
Click to expand...
Click to collapse
Go to this link
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-32/
...and download this fastboot version "SNAPDRAGON FXZ SUPPORT". It has solved all my fastboot problems!
RMarques said:
Go to this link
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-32/
...and download this fastboot version "SNAPDRAGON FXZ SUPPORT". It has solved all my fastboot problems!
Click to expand...
Click to collapse
I need to register in this forum, but this work ? I wont reset my phone right? and work with xt925?
RaR System said:
I need to register in this forum, but this work ? I wont reset my phone right? and work with xt925?
Click to expand...
Click to collapse
Yes, you will.
No, it cant do nothing by itself, its just the correct ADB module for a XT925 device...and it pretty much answer your next question.
RMarques said:
Yes, you will.
No, it cant do nothing by itself, its just the correct ADB module for a XT925 device...and it pretty much answer your next question.
Click to expand...
Click to collapse
"yes, you will" it is the answer if I need reset my phone ?
Before everything was working perfectly and now...
RaR System said:
"yes, you will" it is the answer if I need reset my phone ?
Before everything was working perfectly and now...
Click to expand...
Click to collapse
Just use this fastboot to install any custom recovery you prefer. Dont let your cell phone reboot into the OS or the custom recovery you installed will be replaced by the stock one!
RMarques said:
Just use this fastboot to install any custom recovery you prefer. Dont let your cell phone reboot into the OS or the custom recovery you installed will be replaced by the stock one!
Click to expand...
Click to collapse
Alright. I tryed this now, but my battery is low and ocurred an error because this... I have much luck...
Did you said about don't let my cell phone reboot, but ... How will I use him then?
I can do it ? fastboot erase recovery .... fastboot flash recovery cwm......img
Finally I got and installed TWRP. Thank you so much !
Fomaççy
RaR System said:
Alright. I tryed this now, but my battery is low and ocurred an error because this... I have much luck...
Did you said about don't let my cell phone reboot, but ... How will I use him then?
I can do it ? fastboot erase recovery .... fastboot flash recovery cwm......img
Finally I got and installed TWRP. Thank you so much !
Fomaççy
Click to expand...
Click to collapse
Gr8 stuff man...itd be nice if you click that "Thanks" button at the bottom right corner though!