Related
This is for D800 (AT&T LG G2) users ONLY.
This package will update a phone with D80010d firmware to a "mixed" firmware that boots normally to D80020c (kitkat), but retains the older boot loader and compatibility with loki patched custom recoveries. The "normal" boot is 100% unmodified stock.
This "mixed" firmware is currently the only known way for a stock D80020c (kitkat) system that also allows custom recovery.
What's installed:
rpm, tz, modem, and system partitions from the stock D80020c (kitkat) LG G2 firmware.
LG's D80020c kernel, recompiled by @Savoca, and made compatible with the D80010d bootloader.
That will leave your existing D80010d boot loader (aboot) intact, as well as whatever custom recovery already installed.
This firmware package will (or at least should) refuse to install on ANY firmware other than the D80010d firmware. Please don't reply to this thread if you are using anything else. (That was as polite as I'll be on that issue...)
I STRONGLY suggest doing a full wipe on your device after flashing this. You don't have to, but it'd be a really good idea...
This is NOT my software. This is 100% LG's software and firmware. Don't ask for support in this thread. It won't be provided.
Instructions:
Restore your phone to the stock LG G2 D80010d firmware. Please click "here" for directions. (remember that you have the AT&T device when reading that post...) If you don't like that post, here's a youtube video (not mine) for doing the same thing. Make sure you restore the D80010d firmware and _not_ the D80010o firmware!!
Root the device and install recovery (recovery is required, root is not.) This is a link for rooting instructions. While you are welcome to use CWM for your recovery, this is a link for installing TWRP recovery. (Since cyanogenMod took freely given contributions to their codebasse and went private/for-profit, I have a personal bias against them - so my personal recommendation is for TWRP.)
Copy the d80010d_to_20c.zip package linked below to your phone.
Reboot into recovery and install the d800_to_20c.zip package.
Optionally, also install a superSU or other root package.
Optionally, but suggested, Perform a "factory reset" on your device.
Download Links:
The main package (about 1.7GB): Dev-Host (md5: 7cfe7de4ab31f727b72178b8fb618fd3)
SuperSU: Direct from Chainfire's webpage
Credits:
Several people spent countless hours working on finding a way to get recovery working with LG's kitkat. The kernel used in this package was made by @Savoca - who used the solution found by @JackpotClavin. Others involved are (as far as I'm aware) @AndroidUser00110001 and @jakew02. Of course, @Chainfire for the 'su' package.
Source:
All the images in the recovery package are completely stock with the exception of the kernel and kernel modules. The kernel is modified and recompiled with only the following patch: https://github.com/JackpotClavin/an...mmit/7b6187a0e5fb8ca59888cacf5f5b863baa8d1064. (The installer overwrites the kernel images in /system with those from the kernel compile.) The base kernel source is found on LG's opensource website under the D800 heading.
May 2014 Update:
I'm no longer able to tinker with my G2. My wife took it from me (for her own use), and she gets angry when I mess up all her settings.
(I ended up getting a HTC One M8 to tinker with.)
While I'll leave the thread unlocked so users can assist each other, please don't expect prompt responses from me or maintenance.
switched main package link to dev-host
added "source" section.
As soon as it's done downloading I will let you know that it works unless someone beats me to it that is
EDIT: Finally finished downloading I already flshed back to 10d rooted installed recovery and am now installing kk.zip
Re-Edit: just finished installing also just so you know flashing system only took about 2mins a little bit over that in terms of seconds anyways everything seems to be running fine ill report back tomorrow when its not 1am my time and can test things more thoroughly but I can confirm that everything flashes like its supposed to and also I like the little check you added where it says d80010d bootloader good!
Sent from my LG-D800 using xda app-developers app
XxZombiePikachu said:
... and also I like the little check you added where it says d80010d bootloader good!
Click to expand...
Click to collapse
It's actually checking that loki_patch reports a d80010d bootloader. If not, it'll abort flashing.
Thanks man, now i have kitkat with root and recovery (D80020c)
Damn I wish I had waited for this before flashing kit Kat last week. Of will I'll just have to wait on a recovery compatible with kit Kat or go back to 4.2.2 and then flash this when I have time.
>^·^< Sent From MEOW G2
DowntownJeffBrown said:
Damn I wish I had waited for this before flashing kit Kat last week. Of will I'll just have to wait on a recovery compatible with kit Kat or go back to 4.2.2 and then flash this when I have time.
>^·^< Sent From MEOW G2
Click to expand...
Click to collapse
This is the only way for now to have a recovery on kit Kat
Sent from my LG-D800 using XDA Premium 4 mobile app
Okay, so let me get this straight before I do anything. I'm currently running a custom rom right now, do I still need to revert to stock and install a custom recovery again, or can I just copy the stock kitkat zip to my phone and install from my current recovery?
FlyingColors said:
Okay, so let me get this straight before I do anything. I'm currently running a custom rom right now, do I still need to revert to stock and install a custom recovery again, or can I just copy the stock kitkat zip to my phone and install from my current recovery?
Click to expand...
Click to collapse
What is step #1 on the instructions?
You can do whatever you want with your phone. It won't impact me whatsoever. However, that has nothing to do with what I posted.
Sigh...on every single KitKat Stock ROM ive tried so far...Bluetooth kills the battery, i mean it massacres it. I really dont get what the issue is...some sort of wakelock?
garyd9 said:
What is step #1 on the instructions?
You can do whatever you want with your phone. It won't impact me whatsoever. However, that has nothing to do with what I posted.
Click to expand...
Click to collapse
I'm just trying to get some clarification so I don't have to go out and spend $400 on a new phone.
Would you rather be unaware of what your doing and then break your phone or be cautious and ask a question to the man in charge even if it makes you look like an idiot. I thought so...sorry for wasting your time.
FlyingColors said:
I'm just trying to get some clarification so I don't have to go out and spend $400 on a new phone.
Would you rather be unaware of what your doing and then break your phone or be cautious and ask a question to the man in charge even if it makes you look like an idiot. I thought so...sorry for wasting your time.
Click to expand...
Click to collapse
It clearly says on step #1-
Instructions:
1. Restore your phone to the stock LG G2 D80010d firmware. Please click "here" for directions. (remember that you have the AT&T device when reading that post...) If you don't like that post, here's a youtube video (not mine) for doing the same thing. Make sure you restore the D80010d firmware and _not_ the D80010o firmware!!
So obviously the first step is to flash back to 10d it cannot get any simpler than that
Sent from my LG-D800 using XDA Premium 4 mobile app
XxZombiePikachu said:
It clearly says on step #1-
Instructions:
1. Restore your phone to the stock LG G2 D80010d firmware. Please click "here" for directions. (remember that you have the AT&T device when reading that post...) If you don't like that post, here's a youtube video (not mine) for doing the same thing. Make sure you restore the D80010d firmware and _not_ the D80010o firmware!!
So obviously the first step is to flash back to 10d it cannot get any simpler than that
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
more people asking questions that have already been answered. then when you point out that their question has already been answered they say they are trying to clarify even though it's already been clarified in the OP. it's a phenomenon on xda.
xLordNitro said:
Sigh...on every single KitKat Stock ROM ive tried so far...Bluetooth kills the battery, i mean it massacres it. I really dont get what the issue is...some sort of wakelock?
Click to expand...
Click to collapse
I've seen that people have reported that issue on the D802, but I have to admit that I haven't seen the issue whatsoever on the my own D800. I have bluetooth on 100% of the time, and connected twice a day (on my commute to work and my commute back - each about 45 minutes.) My battery on 4.4.2 is about the same as what it was on 4.2.2 - however, "bluetooth" does show up higher on the battery app list of what is using power. Yet, it doesn't seem to have any real impact on overall battery life.
What are you basing the statement that BT is killing the battery on? Some of those OEM batter apps (like the LG one and even the android built-in one) are often misleading. For example, at least with 4.2.2, my phone wouldn't show "pandora" as a battery user (instead blaming 'android system.)
Of course, it's also possible that, for your environment, something really is causing BT to use up more battery than it should. There are several services related to BT, including the newer GATT/ATT (not related to AT&T) calls. (They are related to low power profiles.) It's possible that *something* in your environment is interacting with the phone or one of those services in such a way to cause issue... I'd suggest getting betterBatteryStats, install the piece needed for it to work properly with kitkat, and getting more detailed information from that. (When I say "environment", I mean the physical space around you, the software on your phone, or anything that may influence RF, light, sound, etc around your phone.)
FlyingColors said:
I'm just trying to get some clarification so I don't have to go out and spend $400 on a new phone.
Click to expand...
Click to collapse
...and I'm trying to give EXTREMELY clear and detailed instructions so that people don't have to replace their phone. In fact, my instructions take a paranoid approach.
However, your question is essentially asking if you could skip steps. Does a "cautious" person skip steps?
Well, you can - assuming you know EXACTLY which partitions are installed on your phone, EXACTLY where they came from, EXACTLY what version they are, and you are 100% sure that they all match what is required. Of course, if you already had all that information, then you wouldn't feel the need to ask the question, as you'd obviously be "geeky" enough to not even really need a recovery package to install it.
Don't come into this thread asking if you can skip steps and then say you want to protect the investment in your phone. As well, don't get an attitude with me if I don't put my entire life on hold, and spell out to you the very same directions that are on the first post on this thread. Don't want to follow them? Fine. Don't. Honestly, I could NOT care less what happens to your phone if you don't want to follow the instructions I typed out.
You can read. I know this, as your question was in the context of the thread. Are you one of those people who will install kitkat, won't bother to "factory reset" the phone, and then complain that things don't work properly?
Edit: On second thought, FlyingColors, please don't install the package from this post. I get no benefit if you do, but you've already been a burden. I'd rather you continue to use whatever "custom rom" you are using. It's obviously something you are happy with (as you don't want to restore your phone to stock), and I don't have the patience to answer questions when I've already taken the time to give the answers.
By the way, as you want "clarification": It's not a "rom." It's not even a "ROM." At best, it's "firmware." If it was "ROM", you wouldn't be able to change it. Read Only Memory.
garyd9 said:
I've seen that people have reported that issue on the D802, but I have to admit that I haven't seen the issue whatsoever on the my own D800. I have bluetooth on 100% of the time, and connected twice a day (on my commute to work and my commute back - each about 45 minutes.) My battery on 4.4.2 is about the same as what it was on 4.2.2 - however, "bluetooth" does show up higher on the battery app list of what is using power. Yet, it doesn't seem to have any real impact on overall battery life.
What are you basing the statement that BT is killing the battery on? Some of those OEM batter apps (like the LG one and even the android built-in one) are often misleading. For example, at least with 4.2.2, my phone wouldn't show "pandora" as a battery user (instead blaming 'android system.)
Of course, it's also possible that, for your environment, something really is causing BT to use up more battery than it should. There are several services related to BT, including the newer GATT/ATT (not related to AT&T) calls. (They are related to low power profiles.) It's possible that *something* in your environment is interacting with the phone or one of those services in such a way to cause issue... I'd suggest getting betterBatteryStats, install the piece needed for it to work properly with kitkat, and getting more detailed information from that. (When I say "environment", I mean the physical space around you, the software on your phone, or anything that may influence RF, light, sound, etc around your phone.)
Well i had this problem even when i had apps installed on a different Stock KITKAT rom created by someone. I DID NOT have this problem on the official OTA from AT&T, or on the PowerUser KitKat ROM but that had so many things missing that ireally did enjoy, maybe ill download the pack with the removed apps. So i decided to rewipe everything, ReFlash stock Jellybean and reroot and do everything all over again and then i flashed this, same problem. Bluetooth is completely off, i rarely use it. It went from 100%-60% within 1 hour of just standby, didnt even use the phone. Look at the stats and Bluetooth has been keeping the CPU awake the whole time. So i did what someone suggested, turned it on and off and rebooted. Same problem. Went back to JB, no issues.
Click to expand...
Click to collapse
xLordNitro said:
I've seen that people have reported that issue on the D802, but I have to admit that I haven't seen the issue whatsoever on the my own D800. I have bluetooth on 100% of the time, and connected twice a day (on my commute to work and my commute back - each about 45 minutes.) My battery on 4.4.2 is about the same as what it was on 4.2.2 - however, "bluetooth" does show up higher on the battery app list of what is using power. Yet, it doesn't seem to have any real impact on overall battery life.
What are you basing the statement that BT is killing the battery on? Some of those OEM batter apps (like the LG one and even the android built-in one) are often misleading. For example, at least with 4.2.2, my phone wouldn't show "pandora" as a battery user (instead blaming 'android system.)
Of course, it's also possible that, for your environment, something really is causing BT to use up more battery than it should. There are several services related to BT, including the newer GATT/ATT (not related to AT&T) calls. (They are related to low power profiles.) It's possible that *something* in your environment is interacting with the phone or one of those services in such a way to cause issue... I'd suggest getting betterBatteryStats, install the piece needed for it to work properly with kitkat, and getting more detailed information from that. (When I say "environment", I mean the physical space around you, the software on your phone, or anything that may influence RF, light, sound, etc around your phone.)
Well i had this problem even when i had apps installed on a different Stock KITKAT rom created by someone. I DID NOT have this problem on the official OTA from AT&T, or on the PowerUser KitKat ROM but that had so many things missing that ireally did enjoy, maybe ill download the pack with the removed apps. So i decided to rewipe everything, ReFlash stock Jellybean and reroot and do everything all over again and then i flashed this, same problem. Bluetooth is completely off, i rarely use it. It went from 100%-60% within 1 hour of just standby, didnt even use the phone. Look at the stats and Bluetooth has been keeping the CPU awake the whole time. So i did what someone suggested, turned it on and off and rebooted. Same problem. Went back to JB, no issues.
Click to expand...
Click to collapse
after you went back to jb then rooted and installed custom recovery then flashed this firmware, did you do a factory reset upon first boot? meaning did you get past the initial set up then go to settings/backup and restore and reset the phone? if not then that could be your problem. the factory reset does indeed reset everything after you initially install kitkat. it worked for me also, i had mms issues every time i initially installed kk. after a factory reset the mms is resolved.
Yep, did that. Still same problem. So im assuming its something to do with the files themselves, and maybe the fixes that are being done to keep recovery. I dont know. But im back on Jellybean for now, i cant let my battery take that huge a hit.
xLordNitro said:
Well i had this problem even when i had apps installed on a different Stock KITKAT rom created by someone. I DID NOT have this problem on the official OTA from AT&T, or on the PowerUser KitKat ROM but that had so many things missing that ireally did enjoy, maybe ill download the pack with the removed apps. ... . It went from 100%-60% within 1 hour of just standby, didnt even use the phone.
Click to expand...
Click to collapse
Wow. That's REALLY strange. I wonder why it's impacting only some users, and not all. (It would make sense that if it happens when BT is turned off, it would impact 100% of users.) Something else that's odd is that it happens with this, but not with the OTA. Even more strange is that it happens with that other "stock kitkat" firmware, as that essentially is the OTA with zero changes - it's even using the OTA provided bootloader and kernel.
I'm not really sure how to guide you on troubleshooting this. Anything I might suggest would take a few days of reverting and flashing various things, and I somehow doubt you'd want to spend the rest of your life doing random experiments for me. Perhaps you should try that poweruser firmware with things added one at a time - as you suggested.
Take care
Gary
garyd9 said:
I've seen that people have reported that issue on the D802, but I have to admit that I haven't seen the issue whatsoever on the my own D800. I have bluetooth on 100% of the time, and connected twice a day (on my commute to work and my commute back - each about 45 minutes.) My battery on 4.4.2 is about the same as what it was on 4.2.2 - however, "bluetooth" does show up higher on the battery app list of what is using power. Yet, it doesn't seem to have any real impact on overall battery life.
What are you basing the statement that BT is killing the battery on? Some of those OEM batter apps (like the LG one and even the android built-in one) are often misleading. For example, at least with 4.2.2, my phone wouldn't show "pandora" as a battery user (instead blaming 'android system.)
Of course, it's also possible that, for your environment, something really is causing BT to use up more battery than it should. There are several services related to BT, including the newer GATT/ATT (not related to AT&T) calls. (They are related to low power profiles.) It's possible that *something* in your environment is interacting with the phone or one of those services in such a way to cause issue... I'd suggest getting betterBatteryStats, install the piece needed for it to work properly with kitkat, and getting more detailed information from that. (When I say "environment", I mean the physical space around you, the software on your phone, or anything that may influence RF, light, sound, etc around your phone.)
...and I'm trying to give EXTREMELY clear and detailed instructions so that people don't have to replace their phone. In fact, my instructions take a paranoid approach.
However, your question is essentially asking if you could skip steps. Does a "cautious" person skip steps?
Well, you can - assuming you know EXACTLY which partitions are installed on your phone, EXACTLY where they came from, EXACTLY what version they are, and you are 100% sure that they all match what is required. Of course, if you already had all that information, then you wouldn't feel the need to ask the question, as you'd obviously be "geeky" enough to not even really need a recovery package to install it.
Don't come into this thread asking if you can skip steps and then say you want to protect the investment in your phone. As well, don't get an attitude with me if I don't put my entire life on hold, and spell out to you the very same directions that are on the first post on this thread. Don't want to follow them? Fine. Don't. Honestly, I could NOT care less what happens to your phone if you don't want to follow the instructions I typed out.
You can read. I know this, as your question was in the context of the thread. Are you one of those people who will install kitkat, won't bother to "factory reset" the phone, and then complain that things don't work properly?
Edit: On second thought, FlyingColors, please don't install the package from this post. I get no benefit if you do, but you've already been a burden. I'd rather you continue to use whatever "custom rom" you are using. It's obviously something you are happy with (as you don't want to restore your phone to stock), and I don't have the patience to answer questions when I've already taken the time to give the answers.
By the way, as you want "clarification": It's not a "rom." It's not even a "ROM." At best, it's "firmware." If it was "ROM", you wouldn't be able to change it. Read Only Memory.
Click to expand...
Click to collapse
Too late, I've already installed it and successfully have Kitkat. Even though you probably don't like me, thank you.
Problems going back to other rom
I was running flex rom before end flash kk end the motion sensor calibration work but doesn't work on my other roms only work on kk only. please fix
Q&A for [ROM] Official Cyanogenmod 11 4.4.4 for the Moto G 4G (Peregrine)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Notification light not working with cyanogenmod
Hi,
I'm using cyanogenmod (m6 and afterwards the current daily builds) on my moto g and for quite some time I have the problem that my notification light is not working. I tried out installing the motorola led activator widget, but this doesn't help. Even when trying out an LED tester app nothing happens. The LED is not broken though as it lights up when trying to boot my moto g on low battery. Do you have any ideas how to solve this?
Thank you in advance!
Link down
Seems the latest build link is down
not I download the latest build. fallen servers
Does the ROM still have the low ram bug ?
Problem audio speakers CM11 / Stock ROM
How about, first of all, I'm new here and do not speak English, so I excuse my writing.
I have a problem with my Moto G LTE (XT1040) with Stock ROM 4.4.4 KK Brazil, although I am from LatinAmerica.
Well, I have not much to this terminal, but a few days ago I had some problems with the rom Stock, restarting not it caught more, so I decided to flash the latest rom Cyanogenmod (specifically 20,141,012) due to some stability issues decided you go back to the Stock, having the same error when freezing some applications Motorola as usual to, so back to CM and switch to the "20141016" to the few hours I started to fail the camera, remained frozen when taking a photo . After that, it went back to flashing CM rom and had the same errors, updating the "20141018" was the same, but a new bug, and could not hear the music or videos without headphones was added, calls were heard if it was not for speaker, so I decided to go back to the Stock, but apparently the problem was continuing, feel that the speakers are damaged, but the alarms or notification sounds if they worked properly. Now try wipes Cache / Dalvik from CWM but only achieved a temporary solution, put a good song and all, but to change it or put it back the audio is going.
Help me, do not know what else to do, I guess that having unlocked the bootloader and lost my warranty
Thanks in advance if this post is incorrect or I violate any rule, excuse me, I'll delete.
I'm also trying to get GPS to work on my Moto G LTE in cm11:
Based on what I read here, I reflashed stock, and tried it out, had no problems at all. Then restored the cm11 nandroid I had made, and it couldn't see any satellites still. Will restoring the nandroid backup also restore the not-working-gps then? What is being saved by unlocking the gps? Will I have different results from backing up everything with titanium backup, then going back to stock, using gps, reinstalling cm, and restoring the backed up apps? It's much more of a pain to do it that way, but if it works, I'll find the time...
This is a canadian xt1040, btw, in case it makes a difference.
UPDATE: I went ahead and reinstalled stock, played with gps for a while, and it worked without any trouble, then reinstalled CM11 (oct 21 nightly this time) restored my backed up apps with titanium backup (not any system apps). Unfortunately, still no gps at all. It never sees a single satellite. Is there anything else to try?
Hello,
First of all, thank you and all people to contributing and helping developing CM for this device!
I only have one question about GPS bug :
You indicate that it's necessary to have a GPS lock in the stock ROM first to enable GPS in CM.
Does a fix for this bug is intended/possible or the only one solution is to reinstall the stock rom, enable GPS and install CM?
Thanks in advance.
Audio solved
It updated my previous query, I could solve the problem of audio speaker, I began to disassemble the phone and as imagined, I found steel wool at the entrance and were making contact, so the cell believed to have headphones all the time .
Enable GPS in Moto G Nightly
This is in response to jac0708 in the thread this thread who asked:
Mind expanding on these two? What is the low ram bug? And how do you get a lock from stock for the gps fix?
Sorry for noobishness
Click to expand...
Click to collapse
The answer I found for the GPS not working was that when I installed CM11 within hours after taking delivery of my Moto G, the GPS would not get a fix. The solution is explained here by colinw:
Posted 11 October 2014 - 10:42 PM
Okay I just fixed my problem following some other post for a Moto phone.
1) Made a (nandroid) backup using clockwordmod of my current setup (cyanogen 11)
2) Restored old backup of a stock rom (I restored back to the one that came with my phone)
3) Then I had to USE the GPS - hadn't done that yet. Also made sure it was set to Device Only mode in settings->location because someone somewhere suggested it.
4) Restored to cyanogen rom.
5) Working!!
Click to expand...
Click to collapse
Just wanted to add that it doesn't always work. I tried at least three times, restoring stock, using gps, and then restoring my backup before I had gps working in CM. But it does work now! Be patient, and maybe just leave the phone with the stock, sitting on maps for a while. Perhaps I rushed it before?
Q&A for [ROM][Stock][Rooted] D850 20f Stock ROM Debloated
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Stock][Rooted] D850 20f Stock ROM Debloated. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
How does one go about installing xposed for this? I saw that you need to use the "helper", but i cant find any info on that.
men+at+work said:
How does one go about installing xposed for this? I saw that you need to use the "helper", but i cant find any info on that.
Click to expand...
Click to collapse
Xposed has a couple of bad side effects at this point, so before doing anything you need to use Titanium or something similar to Freeze (this basically what the "helper" does):
LGSmartCover
Weather
Weather Theme
WeatherPlatform
Then you can install xposed as in the thread here: http://forum.xda-developers.com/showthread.php?t=3034811
However, there is still one more bug to keep in mind: Xposed will crash the Tethering and Networks menu. There is no fix for that yet, but as a workaround you can download some apps from the play store (like Mobile Network Settings), to shortcut around the menu that force closes.
Instagram keeps crashing any ideas
cmulk said:
Xposed has a couple of bad side effects at this point, so before doing anything you need to use Titanium or something similar to Freeze (this basically what the "helper" does):
LGSmartCover
Weather
Weather Theme
WeatherPlatform
Then you can install xposed as in the thread here: http://forum.xda-developers.com/showthread.php?t=3034811
However, there is still one more bug to keep in mind: Xposed will crash the Tethering and Networks menu. There is no fix for that yet, but as a workaround you can download some apps from the play store (like Mobile Network Settings), to shortcut around the menu that force closes.
Click to expand...
Click to collapse
Great, thanks! Shortly after posting this, I actually tracked down the zip from the standard LG G3 forum and flashed that, which seems (so far) to have worked.
Do you, or anybody for that matter, know by chance any confirmed working xposed modules that work on the stock rom? I tried a couple lollipop-approved modules and so far nothing has worked. It's been a while since I've used xposed, but back when I did I think I only installed gravitybox.
I attached the .zip in case anybody else needs it. Just flash that after flashing the xposed .zip and then install the xposed installer apk
men+at+work said:
Great, thanks! Shortly after posting this, I actually tracked down the zip from the standard LG G3 forum and flashed that, which seems (so far) to have worked.
Do you, or anybody for that matter, know by chance any confirmed working xposed modules that work on the stock rom? I tried a couple lollipop-approved modules and so far nothing has worked. It's been a while since I've used xposed, but back when I did I think I only installed gravitybox.
I attached the .zip in case anybody else needs it. Just flash that after flashing the xposed .zip and then install the xposed installer apk
Click to expand...
Click to collapse
There is a similar all-in-one tweaker for the G3 called G3 TweaksBox. It is partially working in Lollipop. See post #3 here
---------- Post added at 03:45 PM ---------- Previous post was at 03:40 PM ----------
grodri1972 said:
Instagram keeps crashing any ideas
Click to expand...
Click to collapse
Sorry, I'm not an instagram user so I'm not sure. Maybe someone else can help
Hey guys i'm having the same problem as louveuass the only way to get this to work is going back to stock TOT and then root twrp and flash this? i'm coming from illusion and i just don't see navigation panel or notification, it's just wierd! i'll try again today and if not i'll go back to TOT.
Thanks if anyone know
So does this ROM do the "I'M FULLY CHARGED" battery notification thing?
Re: http://forum.xda-developers.com/att-lg-g3/help/qa-d850-20f-stock-rom-debloated-t3069026/post60062058
So does this ROM do the "I'M FULLY CHARGED" battery notification thing? I switched to AOSP just to get away from that, but I prefer stock for the camera.
For those who don't know what I'm talking about, the original stock ROM turns on the screen and fires a notification when the battery is fully charged, so if you have your phone plugged in next to your bed, it'll turn on the screen and buzz every time it drops to 99% and then charges back to 100%, which means every couple minutes, all through the night. No notification setting fixes this, only putting the phone on silent works, and that solution doesn't work for me, nor do I want to mess around with Tasker. I also don't want to unplug my phone when it's charged and start the day with less than a full charge.
Thanks!
Just wanted to say thanks! I have been waiting for a cleaned version of stock Lollipop for the AT&T LG G3 for what feels like months now! I flashed this and the modem file after doing a backup and cleaning everything up first. So far it is working great!
Appreciate it!
So over night I have developed a problem, it's seemed to have added a +1 on front of my numbers, so I get texts from friends but when I reply it says invalid number, is there a setting for this?
Also can we use some super duper Kernels on this rom? Or because it's stock we can't change Kernel's?...
Sent from my LG-D850 using XDA Free mobile app
running [Stock][Rooted] D850 20f Stock ROM Debloated rom
i love this rom great battery life everything is very snappy i have only found one glitch which is whenever i take a screenshot its just get stuck on the notification pannel saying saving screenshot only way i can get rid of it is by rebooting the device anyone else have issues with this........
Tethering?
Is tethering supposed to work with this ROM? When I try to enable it, I get the same message I did with the stock ROM directing me to AT&T's website.
No system dock or buttons
I flashed a stock rooted rom on my lg g3 and not the menu buttons and system dock aren't showing up..
Rom: http://forum.xda-developers.com/att-lg-g3/development/rom-20f-stock-rom-debloated-t3059610
Can I take ota with this?
I cannot save apn for straight talk settings. After saving it switches it back on me. Weird
Unable to download any file
Hi,
I just bought this used LG G3 phone which has this image installed. It was an ATT phone but I am using it on T-mobile. Most of the things working except this one.
I am unable to download any file (pdf etc..) from any browser. Seems like download folder is locked somehow and I am unable to delete any files from there. I tried changing permission for download folder but that too failed. Screenshots are also not getting saved. Camera picture seems to be getting saved.
Please advice how to fix this issue.
charlessmith1981 said:
Hi,
I just bought this used LG G3 phone which has this image installed. It was an ATT phone but I am using it on T-mobile. Most of the things working except this one.
I am unable to download any file (pdf etc..) from any browser. Seems like download folder is locked somehow and I am unable to delete any files from there. I tried changing permission for download folder but that too failed. Screenshots are also not getting saved. Camera picture seems to be getting saved.
Please advice how to fix this issue.
Click to expand...
Click to collapse
Not sure but sounds like it may be an sdcard permissions issue. Take a look at the OP here and see if the fix suggested for sdcard permissions works.
Just to Clarify
I have the LG G3 D850 the ATT Model
So in order to install the new ROM:
1. I put the ROM.zip (1.1GB) and the Modem.zip on the SD Card
2. Also the Super SU on the SD Card
3. Boot the Phone on TWRP
4. Chosse install the three archives: ROM, Modem and SuperSU
5. After the reboot, clean the cache
Excuse me for ask, but I,m not a expertise in the matter.
Also I have more questions:
1. I already instal the lollipop from cyanogen but the phone doesnt work well. ¿There is a problem with that?
2. I must first back up the contacts, ¿Right?
3. I just need the 1.1GB ROM, ¿Right?
Thank you for response this questions.
Flashed all 3 files with a clean install. Only problem I've come across is my phone will no longer vibrate from a text or when I use my keyboard. AT&T LG G3 D850
hebrew language?
Q&A for (Share) Resurrection-Remix-LP-v5.5.1-ferrari
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for (Share) Resurrection-Remix-LP-v5.5.1-ferrari. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
apna.suresh0305 said:
I think any custom ROM can't replace the MIUI camera, i tried CM 12.1 but camera is very upset in terms of picture clarity as well camera app is very laggy and some times gets hang and wont response. Not able to dare to try custom ROMs due to this reason.
It would be really very great if anyone can able to port MIUI camera to these custom ROMs.
Click to expand...
Click to collapse
Tottaly agrre with you, xiaomi phone camera is main reason for me, too bad none custom rom able to provide equal result from camera miui rom. If there any it would be fantastic
cannot get cwp installed
hey guys,
i cannot get the CWP installed or the TWRP .... i cannot find the link to download and get the phone into the recovery and install the new rom,
please provide me the links and i will try the rom.
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
vrtsvas said:
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
Click to expand...
Click to collapse
Try version 4 of the toolkit.
That worked for me.
Also, make sure you do exactly as the desctiption says, don't change the order of actions (as i did) because then it will not work.
First make sure that you pc has the right drivers (or use this: http://forum.xda-developers.com/showthread.php?t=2588979)
Then use v4 from this link and use the right order (http://en.miui.com/thread-117336-1-1.html)
So first TWRP then root (if you still need it).
Automatic turn off issue
How to fix automatic turn off issue
WiFi not working
Please provide WiFi driver
Mi4i going into bootloop after flashing CM based roms!
I have tried almost all of the custom roms(latest ones) available for Xiomi mi 4i but neither of them actually worked for me. Whenever i flash the roms, it gets installed correctly and when it asks for language selection, it shuts off. I have tried flashing with both twrp and cwm, cleared cache, dalvik cache but problem never solved. I think the CM has some serious problems with this devices.
aniketmule said:
I have tried almost all of the custom roms(latest ones) available for Xiomi mi 4i but neither of them actually worked for me. Whenever i flash the roms, it gets installed correctly and when it asks for language selection, it shuts off. I have tried flashing with both twrp and cwm, cleared cache, dalvik cache but problem never solved. I think the CM has some serious problems with this devices.
Click to expand...
Click to collapse
Mine is not directly going into boot loop.
Sometimes it works a few minutes (up to 20 or so), but it will shut down.
When connected to power it does NOT shut down, but still.
I tried yesterday the CM 12.1 version from Smoki3 from july 30th and that seems to work, but i did not have any time any more, so i had to restore my nadroid backup.
Will try it later again (maybe tomorrow) if that really does work, or if it was just to short time for it to shut down.
elot01 said:
Mine is not directly going into boot loop.
Sometimes it works a few minutes (up to 20 or so), but it will shut down.
When connected to power it does NOT shut down, but still.
I tried yesterday the CM 12.1 version from Smoki3 from july 30th and that seems to work, but i did not have any time any more, so i had to restore my nadroid backup.
Will try it later again (maybe tomorrow) if that really does work, or if it was just to short time for it to shut down.
Click to expand...
Click to collapse
I think I was using developer rom and flashed CM on it directly so the problem occured. I read somewhere on a forum that you should flash it on global rom. I tried it with ASOPA-L rom as it was having the same problem and it worked flawlessly. Now going to try it with latest CM rom.
One thing I noticed the camera quality is better in ASOPA-L but this rom lacks performance mode.
I'm experiencing bad speaker sound after installing this ROM. Is there any way to fix that.
Sent from my Mi 4i using Tapatalk
I'm absolutely loving this rom. I've no idea why xiaomi let's miui be so slow and laggy. This room feels great and everything runs/opens so much faster and it looks fantastic. Cmon Xiaomi, step up your game, miui is way too heavy.
Like other people have mentioned, the only downside to not having miui is the camera. I've tried a bunch of others and the quality is greatly reduced compared to the miui camera. Please someone, please port miui 6 camera!!! PLEASE!! I'll be your best friend.
Whenever i boot ..it turns off...pls hlp
Thanks in advance
vrtsvas said:
hey guys,
i cannot get the CWP installed or the TWRP .... i cannot find the link to download and get the phone into the recovery and install the new rom,
please provide me the links and i will try the rom.
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
Click to expand...
Click to collapse
i also experienced the same problem when i was on miui 7 beta... i was able to flash twrp recovery but failed to flash custom ROMs... after that i reverted back to miui6 6.6.10.0 by using fastboot... and then again flashed twrp using mi toolkit v4 and succeeded in flashing custom ROM... this works 100%.Keep in mind that u can't flash a custom ROM..if u r on later version of 6.6.10.0
I have been on a plain rooted 4.1.2 rom for years. I now need to update for a couple apps I use to work. Can someone give me some brief feedback and point me in the right direction so I can update my phone without locking the bootloader?
I like the plain set up I have now, so maybe I just need to update to the highest version without locking BL. Thanks.
I thought about trying this---> File: cm-10.1-20130315-NIGHTLY-d2vzw.zip, but all links that I've found are dead. Anyone know where I might find this file? Thanks
CM is dead. The leftovers rose from the ashes as Lineage OS.
Look them up. Pretty stable.
Jump straight into Marshmallow or Nougat. I'm still on CM12.1 Lollipop, but the newer stuff should work fine. There are threads for all of it, so do good reading before you start.
Thanks for answering my thread. I haven't messed around with my phone in years. I guess what you're saying is since I've never took the OTA 4.3, I can load an advanced CM without locking my bootloader.
phonetool....thanks for the input. I tried Nougat but I had issues with my 3G data and a couple other little things.
I decided to go with 12.1 Lollypop and it is great. All my apps work and 3G fires right up.