[Q] LG Logo Soft Brick After TWRP Format - AT&T LG G2

Okay so I'm pretty new to the whole forums thing so please bare with me a bit. I flashed CloudyG2 3.1 and wanted to do a a factory reset so that I could start anew but whenever I tried doing so it would fail and lead me to TWRP. So I tried doing the format through there and then that's when I believe it even deleted my OS. Now the only thing it does is sit at the LG boot logo while the notification light slowly flashes blue and green. I can still go into TWRP but am unable to go into download mode. I've tried sideloading but whenever I connect my phone to a pc (I've tried multiple cables and pc's) I get a message that says "The last USB device you connected to this computer was malfunctioned". I went to get my port replaced and they said the screen stopped working so they put in my old one. I don't know if I should just get the port switched to the new one and try to flash it and pray the screen turns on afterwards or is there a way to get this USB to work. Any advice would help a lot! Thank you!

Related

[Q] Motorola Defy Not Turning On

Hi Guys,
I have tried to install a CM mod on my Motorola Defy as illustrated here. The problem is that despite the phone had been rooted, I had some problems with ClockWorkMod and rebooted my phone in recovery mode using the application that ships with the phone. I did remove the Cache and Factory settings and ran the zip file.
The problem is that upon restart, the phone kept rebooting itself, that is, I kept seeing the Motorola logo for a couple of minutes, and then, the phone reboots and the process is repeated.
Now, out of the blue, the phone is not even turning on. What I have is a small white light that turns on whenever I connect the phone to a laptop via usb. Any idea on how I can get the phone working? At the moment I do not really care about what OS version, as long as it runs.
Thanks in advance
Edit: There seems to have been an issue with the battery, I have managed to load up the phone to recovery mode. Can anyone show me how can I install a fresh Operating System? I seem to only have access to the phone's boot up screen. Also, the laptop does not seem to be able to connect to the phone via usb.

[Q] Stuck! Phone does't turn on and does not charge

Hello guys I have been struggling for the past week, my LG G2 phone has been rooted, I flash a custom recovery TWRP then I lunched to my stock rom I then tried to update my firmware to 4.4.2 kitkat the update was downloaded successfully, then it told me to reboot, so I did phone switched off then I was stuck on a boot loop but this time it was a boot loop with a error message on the left top corner. and then it would take be to a dim back screen. I searched the entire week to find a method to get me through the start screen and I found this -> NO Recovery mode, No download mode, after OTA on rooted LG G2 http://forum.xda-developers.com/showthread.php?t=2582142 I done exactly what it was showing, then my phone switched off and now it won't power up. Then I tried turning it on NOTHING phone does't show the LED charging lights, does't respond to the usb being plugged in can't do ANYTHING I am guessing the battery has died so now I don't know what to do, either contact LG or should I try getting a battery that is fully charged or even use a factory cable any ideas guys ?
Call LG support.
Sent from my g2 using Tapatalk

[Q] D838 brick, cant tell if soft or hard

i tried installing a custom rom on my g pro 2 but eventually the device got some errors. i tried to restart but the phone wouldnt start. it boots to LG logo (not moving) and blank screen and same thing over and over again. so i tried to go for download mode, which is half gone. when i plug the phone into download mode, the first screen comes out, download mode. then screen goes blank and nothing else. my pc doesnt detect anymore, it just shows an unknown usb bulk device and 8 usb drives pop up.
i tried factory reset too but nothing. stays erasing forever.
i have the KDZ File already and the flashing tool. i just don't know how to flash it like this.
solved
Disaster Master said:
i tried installing a custom rom on my g pro 2 but eventually the device got some errors. i tried to restart but the phone wouldnt start. it boots to LG logo (not moving) and blank screen and same thing over and over again. so i tried to go for download mode, which is half gone. when i plug the phone into download mode, the first screen comes out, download mode. then screen goes blank and nothing else. my pc doesnt detect anymore, it just shows an unknown usb bulk device and 8 usb drives pop up.
i tried factory reset too but nothing. stays erasing forever.
i have the KDZ File already and the flashing tool. i just don't know how to flash it like this.
Click to expand...
Click to collapse
problem solved. after the factory reset i pulled out the battery and download mode worked again
great to know that you fixed it

LG Logo Bootloop - Can't access TWRP - No DL Mode

Hi guys,
New to flashing custom ROMS. Good news - flashed CM12, then LiquidSmooth and I'm learning a lot after having soft bricked my phone a few times. Bad news - After trying to get back to Stock I'm not able to get out of this LG Logo bootloop. The LG logo will flash, screen will go black and the whole process starts again. It doesn’t progress past that. I'm unable to get to TWRP recovery or download mode.
My idiotic move:
Iffy stability with camera and mobile data with CM and LiquidSmooth. Decided to go back to Stock.
I flashed my nandroid backup, which I believe led to a bootloop (can’t remember). Was able to boot to TWRP and get back to CM12. Then I had the genius idea of using AutoREC and selecting the “Go Back to Stock” option. Yes, it’s already sounding like a bad, and nonsensical idea as I say it now. Can't remember exactly what I did next - I either flashed my nandroid backup or did a factory reset through CM settings. Threw me into this bootloop.
The details:
Model - D800 - Am sure of this.
Stock software before flashing CM12 was Lollipop 5.0.2 via OTA.
TWRP Recovery 2.8x something or other. Used AutoRec to flash.
I can interrupt the bootloop and access Factory Hard Reset through Power + Volume Down
Had to go to JB Bootloader in order to Flash ROMs. Errors returned otherwise.
Roadblocks:
No download mode. Holding Volume Up & Inserting USB cable doesn't work. Although am able to get bootloop to include a blank screen with red flashing LED through this method from time to time.
Phone boots up, and goes directly into bootloop when plugging USB cable into phone. This happens both when plugging into a wall charger or into a computer. I think this is probably the biggest pain and is holding up things from progressing. Can turn off phone by holding down power for a few seconds, BUT if the phone is plugged in it will continue to boot on its own.
Phone not recognized by computer & ADB However, was at times able to get Device Manager to recognize the phone as an "Unknown Device" after going to the Factory Hard Reset screen. This is no longer working after trying different drivers. I’ve went through LG Mobile Universal Driver as well as the Koush driver.
Going through Factory Hard Reset via hardware buttons only throws phone back into BootLoop
Can’t boot into TWRP
Any insight or help guys? Thanks in advance. I think getting into Download Mode will be a quiet victory. I’d like to try to use Supersports guide once I get there to go back to stock.

"Softbricked" Nexus 5, boots to bootloader but windows won't recognize it.

Hello,
I have an "ex-rooted" nexus 5 that I just yesterday tried factory resetting, however, it won't do that and just stays stuck at erasing for 15-30 minutes before the broken android shows up. Now, when I say ex-rooted I mean that I have either uninstalled supersu with the supersu app, or I've tried just flashed over the old rom. Alas, I have no recovery at all, when I choose recovery from the bootloader the screen goes black and it goes back to try erasing the phone.
I would have just flashed it, but this is where my problem comes in. My phone doesn't show up on my computer at all. I have the right drivers and such, even tried different ports and cables.
Anyone have any ideas? Sorry if I'm ****ty at explaining my problem
I'll be eternally grateful for any help whatsoever
Recovery it what it goes to in order to FDR so you must have a recovery apparently. You can't boot up at ALL I am guessing?
Sent from my Nexus 5

Categories

Resources