[Q] How can I receive only calls to my Google Voice number? - General Questions and Answers

I use my Google Voice number as my main phone number. Recently, I've been getting telemarketers calling my carrier number (T-Mobile).
When the call comes in on my phone, from what I can tell, there's no way for me to know if it's going to my GV number or my carrier number (the only way I can tell is checking my GV app afterwards). I'm looking for a way to have the phone automatically reject or block all incoming calls to my carrier number or to just have the phone not ring/vibrate when a call comes in on that number.
FWIW, my device is a OnePlus One and I'm running Android 5.0.2

Related

Google Voice users...Quick Question?

I have a question for the google voice users out there. I didn't want a few people to have my cellphone number, when I give them the Google voice number , my cellphone will ring correct? And if I call them back will the Google voice number show on their phone ?
It will ring through your phone if you have your settings right in GV online. As for calling back out, you have to call through the GV app in order for it to show up as your GV #.
If you are using a 2.1 rom, be careful. When calling out using the GV App on 2.1, I have noticed that even though it says it's using the GV #, it's really using your regular cell phone number... so test it on a phone you can check before calling those people.
Does anybody have any invites.:?
Can someone Invite me? )

Google Voice and AT&T (little off topic)

Hi,
Since with Android you have a choice for your calls to go thru Google Voice (totally - only international or not at all) I was wondering how it works with AT&T.
If you call another AT&T cell phone it doesn't count in your minutes plan but what if you go trhu Google Voice? Is that consider like a landline to a cell phone? Or AT&T "sees" that you are using a AT&T cell and count the time has cell to cell ?
I hope I was clear in my explanation
I honestly don't know.
This has been discussed before on AT&T's forums.
The question on those forums were posed as: " If I use Google Voice and add that phone number to my "A-List" could I technically get unlimited calls to anyone?"
I'm pretty sure the answer was no. And therefore, I don't think AT&T sees the Google Voice number as anything but a forwarded call.
So if the calls are forwarded, you pay according to where it is forwarded.
Example: All of these go THROUGH Google Voice:
I call another AT&T cell from my AT&T cell. Same network = FREE M2M
I call a landline from my AT&T cell, no M2M, pay for call
This is also equal for when someone dials your Google Voice number.
It does leave questions on how international call are worked out. But I think that is on Google's end, not AT&T's
mymansionisabox said:
I honestly don't know.
This has been discussed before on AT&T's forums.
The question on those forums were posed as: " If I use Google Voice and add that phone number to my "A-List" could I technically get unlimited calls to anyone?"
I'm pretty sure the answer was no. And therefore, I don't think AT&T sees the Google Voice number as anything but a forwarded call.
So if the calls are forwarded, you pay according to where it is forwarded.
Example: All of these go THROUGH Google Voice:
I call another AT&T cell from my AT&T cell. Same network = FREE M2M
I call a landline from my AT&T cell, no M2M, pay for call
This is also equal for when someone dials your Google Voice number.
It does leave questions on how international call are worked out. But I think that is on Google's end, not AT&T's
Click to expand...
Click to collapse
I am not sure that is correct, because when you place a google voice call, gv is actually calling you and then calling the other party and joining the calls. So for international you have a incoming local call and you get to pay GV low rates. I have a PBX at home that uses free incoming minutes and therefore with GV free unlimited calling.
Since we have android the callback is in the background, unless you have the update that allows you to call a GV number with a access code assigned to each contact so you don't have to wait for the callback and have a much faster connection.
just checked my usage... bad news...
making calls through GV counts against your minutes... each of my GV calls is going to a GV number and then going to the party i called (even though they're on AT&T as well)...
so, if you're calling an AT&T subscriber, just use your normal dialer... if you're calling any other carrier subscribers (or landlines) use either, depending on what number you want shown on potential caller ID's
just place the call through the GV web app then.
The way to get the free unlimited calls is to go into GV settings and have all calls from GV display on your phone as the GV number. You then give out the GV number as your main number, all incoming calls hit your phone and the number they came from is GV.
Also, when you make out outbound calls, you use GV to set up the call - it rings your cell and comes from your GV number, then connects to whoever you call.
If the GV number is one in your circle, or faves, or whatever ATT calls it, then all are free - but of course you lose caller id on incoming calls.
I have a Sprint data card that I use Skype with. A one and a half hour call through Skype only uses 25MB. Sprint is not able to "see" that I am using VoIP because Skype encrypts the data. This way I make somewhat free calls and its real cheap considering the data from my alloted 5gb. I am anxiously waiting for Skype to start working on ATT Smartphones. I did wonder how GV would work but I'd prefer Skype and use my Skypeout number.
alphadog00 said:
The way to get the free unlimited calls is to go into GV settings and have all calls from GV display on your phone as the GV number. You then give out the GV number as your main number, all incoming calls hit your phone and the number they came from is GV.
Also, when you make out outbound calls, you use GV to set up the call - it rings your cell and comes from your GV number, then connects to whoever you call.
If the GV number is one in your circle, or faves, or whatever ATT calls it, then all are free - but of course you lose caller id on incoming calls.
Click to expand...
Click to collapse
Exactly, this also give you the option to press "4" during the call and record the call at GV!
kyphur said:
Exactly, this also give you the option to press "4" during the call and record the call at GV!
Click to expand...
Click to collapse
Thanks for the press 4 trick.. i had no idea.
alphadog00 said:
The way to get the free unlimited calls is to go into GV settings and have all calls from GV display on your phone as the GV number. You then give out the GV number as your main number, all incoming calls hit your phone and the number they came from is GV.
Also, when you make out outbound calls, you use GV to set up the call - it rings your cell and comes from your GV number, then connects to whoever you call.
If the GV number is one in your circle, or faves, or whatever ATT calls it, then all are free - but of course you lose caller id on incoming calls.
Click to expand...
Click to collapse
Yeah that is the best way to do it if you want to do a regular voice call. I didn't know ATT had the fav option!
Also what I do is use freepbx at home in a VM with a GV setup so I can make free VOIP calls to anyone in the US. I have voip phone at home and voip software on my phone. I still use GV for voicemail.
In this case i use SIPDROID.
AT&T added a fav option for higher dollar plans. I am not sure what they call it, but they did it keep up with VZW and TMo
at&t's version is called A-List. IIRC, you need to be on a $60 monthly or higher plan. You get to list 10 numbers on your account (not per line) and all in/out calls to those 10 numbers are treated as m2m...

[Q] Full Google Voice Features on Motorola Atrix on AT&T using Wireless Number

Phone: Motorola Atrix 4g
Carrier: AT&T
OS: Android 2.2 (soon to be 2.3!)
Problem: Can't use all Google Voice Features with Cell Number
I recently purchased the Motorola Atrix and so far I am very impressed with this phone. My friend has an Android phone with Sprint and he told me about Google Voice and how great it was for his phone. I short I WANT that with my phone. I understand the basic concept of how GV works and how Sprint has a "special" relationship with this service, but I still would like to try and make it work with my phone in a similar way.
Notes:
I do not have a separate GV Number.
I have installed the GV app and the voicemail functions work but SMS and call forwarding do not work.
My Questions:
1) If I port my cell number over to GV will everything work correctly (like Sprint...including SMS and Call Forwarding features)
2) If I do port my number over...how are my outgoing and incoming calls (that go to my cell phone) billed on ATT. Because calls get routed through Google do they still appear as Mobile to Mobile Calls? Are they all Land line calls from GV? Does the forwarding of the correct "Caller ID" information solve all of these problems?
3) Ideally I would like to avoid porting my number to Google, and work with settings on my phone or with ATT technicians to make my phone work like it would on the Sprint System. Basically I want to use all of the GV benefits without getting a separate GV number and without porting my Cell number to GV. Is this Possible? Has anyone done it?
Thanks to anyone who read this and has any information for me.
Cheers,
BW

[Q] Bobsled calling (tmobile app)

so they advertise you can call without using minutes with this app...im wondering if when you call someone when they see you calling what number will appear for the caller id? will your cell number appear or does it route it through another number and has that one show?
thanks

Google Voice shows random number instead of dialed number in call log

Is anybody here using Google Voice on their Flex 2? I have this issue where outgoing calls made through Google Voice are recorded in the stock phone app's call log as some random number, not the number I just dialed. I did a little a little research, and Google Voice apparently routes all outgoing voice calls through a "gateway" or "access" number. That must be the random number that's showing in my call log. But this was never a problem on all the Android phones I've owned (and I've had many) and all the different ROMs I've flashed over the years. For example, Google Voice shows the actual numbers I dialed on my previous LG G2, Samsung Galaxy S4, LG G Pro, Nexus 4, etc.
If anyone can confirm this is also happening on their LG Flex 2, then I'll know it's not just me.
Mine showed the corrected # on both side. I'm on H950 5.1.1. Maybe you can update your google voice app.
That's the way it works on iPhones. I've never seen the Google Voice "hidden routing" number show up in the native call log on any android phone I've used. (That hidden routing number in Google Voice parlance is sometimes referenced as the "grandcentral" number which was the company that Google Voice bought when it started). If you notice, your "grandcentral" number actually shows up in the background (you can of see it in small numbers in your Google Voice app for a half second) when dialing a call from your Google Voice App.
Is it happening for calls you're making from even your Contacts, or just unknown numbers that you dial manually? (Not that I'd have anything to add or offer, but I"m just curious). Are you running stock, or are you modded in any way? (Again, I'm just curious).
I actually prefer the way Apple does it so you can see the number in your call log. It's handy to have. It's a static number that doesn't change for your Google contact. You can save it and dial it directly from any phone -- even without data or making a landline call -- and the call shows up on the other end that you're calling from your Google Voice number.
epofhouston said:
Mine showed the corrected # on both side. I'm on H950 5.1.1. Maybe you can update your google voice app.
Click to expand...
Click to collapse
I'm already on the newest version of the Google Voice app. I'm on a LS996 running 5.1.1, but I'm firmware version ZV6. I believe the newest 5.1.1 stock firmware is ZV9. I wonder if upgrading to ZV9 will fix the problem What 5.1.1 firmware version are you on?
I'm on 11x.
jgolf said:
That's the way it works on iPhones. I've never seen the Google Voice "hidden routing" number show up in the native call log on any android phone I've used. (That hidden routing number in Google Voice parlance is sometimes referenced as the "grandcentral" number which was the company that Google Voice bought when it started). If you notice, your "grandcentral" number actually shows up in the background (you can of see it in small numbers in your Google Voice app for a half second) when dialing a call from your Google Voice App.
Is it happening for calls you're making from even your Contacts, or just unknown numbers that you dial manually? (Not that I'd have anything to add or offer, but I"m just curious). Are you running stock, or are you modded in any way? (Again, I'm just curious).
I actually prefer the way Apple does it so you can see the number in your call log. It's handy to have. It's a static number that doesn't change for your Google contact. You can save it and dial it directly from any phone -- even without data or making a landline call -- and the call shows up on the other end that you're calling from your Google Voice number.
Click to expand...
Click to collapse
I see the Google routing phone number in my call log for all the outgoing calls I make. It doesn't matter if I dial someone from my Contacts or I manually dial the number. Also, I'm not sure what you mean by "dialing a call from your Google Voice App". I'm dialing by tapping on names in my Contacts app, or by tapping out numbers in the stock Phone app. I only open the Google Voice app to look at text messages or listen to recorded voicemail messages.
I'm using a Sprint LS996 and running the stock 5.1.1 firmware version ZV6. No mods. If Google Voice is working on your Flex 2 and showing the real outgoing numbers in your call log, may I ask if you're running a Sprint LS996 or an AT&T H950? Maybe it's just an issue in the stock LS996 ROM. Like I said, I never had this issue in any of the other Android phones I've owned.
I'm not sure why you say it's preferable that Apple shows the Google routing number instead of the actual number dialed. Why would you want to see phone numbers you don't recognize in your call history log? Why would you want or need to save that routing number and dial it directly? If you already have that person's real phone number, what is the advantage of having another strange number for that same person?
Oh yeah, I messed up on the part of "dialing from my GV App." Sorry about that. I was confused about where I see that grandcentral number when I make a phone call. I thought I only saw it if I initiated a call from the GV app, and even when I do that it just goes to the native dialer and I see it every time.
This is what I meant: On my phone, when I make a call, whether from contacts are just using the regular dialer, the top line shows my contact and/or the number I'm calling; the second line reads "call forwarding is enabled" the third line in blue reads "CALLING VIA GOOGLE VOICE" (that line is capped on my phone) and then the grandcentral number.
I'm using the AT&T H950. Did you by chance disable call forwarding? I remember when I had sprint it didn't play nice with Google Voice. Integrating voice mail (I can't remember exactly what the problem) but it was something like call forwarding didn't work very well with Sprint (and its MVNO's) and Google Voice.
As to your last question why I prefer seeing the grandcentral number in the call log is for personal and nostalgic reasons, and I probably shouldn't have even mentioned it because the whole thing is pretty much moot and pointless now, but I might as well briefly explain. In the early days of Google Voice, which wasn't that long ago, smartphones and cheap data weren't ubiquitous and a lot of us were using dumb phones. It wasn't easy using dumb phones with Google Voice, especially texting, because that unknown number or the grandcentral number was confusing as heck to both you and the person you were texting. If you could find out what number Google Voice was routing to your contact (without using the GV app like on a dumb phone) then it made texting easier.
Now someone is probably going to jump in, or they are thinking, it was easy to text with Google Voice on a dumb phone, because there were easy workarounds like just starting the text from your computer. True, but if you wanted to initiate the text, and you didn't have access to a computer or data, it was convenient to have that grandcentral number saved in your contacts. It was always kind of hard finding that grandcentral number. Even on Android phones you have to take a screenshot, so I kind of liked having that number in the call log and being able to see it. In a way, that's really the number your calling anyway, at least that's the way I look at it.
Anyway, it doesn't really matter now since we use smartphones and have near universal cell and cheap data plans.
---------- Post added at 04:17 PM ---------- Previous post was at 03:51 PM ----------
wtang said:
It doesn't matter if I dial someone from my Contacts or I manually dial the number.
Click to expand...
Click to collapse
I should just explain why I asked that question too. I was just curious to know if there was any differentiation between unknown manually dialed numbers and saved contact numbers. I wouldn't have been able to offer any insight if in fact there was a difference between the two. I was simply curious. In my experience the Google Voice App, and routing calls through Google Voice on a mobile device, always works better for numbers you've called before with that device. I think the info gets cached in the phone's Google Voice app once used.
if your going to use google voice you should use hangouts it's a much better experience You can make and receive calls, send and receive text messages,MMS and listen to your voicemails even if you don't have a active phone service all just using WIFI download the hangout dialer from the playstore If you want to use the stock dialer app on your device but have your Google Voice number appear on caller ID, keep the original Google Voice app and select the use Google Voice to make all calls in the settings Additionally, you set the Hangouts Dialer app as your default dialer, which will display your Google Voice number on Caller ID.
Google is removing texts feature from Hangouts soon
I've been using hangouts since being integrated with Google Voice that's just a rumor going around since november that they would drop SMS features but I doubt it I'm in the latest version 7.0 i still send and receive text messages just fine
Just an update for everyone. I flashed back to unrooted stock ZV6, then I applied the ZV7, ZV8, and ZV9 OTA updates. Now that I'm on ZV9, which is the latest stock Sprint ROM, I decided to test Google Voice again. Well, the call history log in the stock phone dialer still shows the Google Voice routing number, not the actual number I dialed. I guess something is different (better) in the AT&T firmware that fixes this Google Voice issue because folks here using the AT&T H950 don't have the issue.

Categories

Resources