I am creating this thread on behalf of @k_kasadze, who was seeking help from me using pm.
It looks like he has soft-bricked his Galaxy S6, whose model no. he says is indeed G920F without any doubt, by flashing the 5.1 firmware. I find it strange, because he did get PASS message on Odin, as shown by the screenshot below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help? As far as I know, you cannot downgrade after flashing 5.1.1. And you can't install TWRP either. Please correct me if one can install TWRP, in that case, he could restore from TWRP. I think he can still boot into download mode.
Ask him, to boot into stock recovery and clear cache + factory reset
Use emergency software recovery in Samsung smartswitch
s6
djaidyc said:
Use emergency software recovery in Samsung smartswitch
Click to expand...
Click to collapse
When I'm connecting in download mode the smartswitch says that device not supported, samsung driver is installed
factory reset didn't help
What version of odin did you use? Its recommended to use the very lasted version. That made the difference for a guy in another topic
Bring the S6 back to Samsung for warranty repair.
s6
roydok said:
Bring the S6 back to Samsung for warranty repair.
Click to expand...
Click to collapse
I used 3.10.6 odin and I can't bring that in service center it's not on warranty. Is there any downgrade option? or anothe 5.1.1 tar to flash?
Are you sure it's a 920f? Mine was made in Vietnam and is a 920i
Sent from my SM-G920I using XDA Free mobile app
dbarrett480 said:
Are you sure it's a 920f? Mine was made in Vietnam and is a 920i
Sent from my SM-G920I using XDA Free mobile app
Click to expand...
Click to collapse
yes I'm sure, it is G920f on the back there is also written g920f also inside... I checked
also when I'm trying old odin to flash it fails and writes this, but 3.10.6 works great but cant boot up
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dbarrett480 said:
Are you sure it's a 920f? Mine was made in Vietnam and is a 920i
Sent from my SM-G920I using XDA Free mobile app
Click to expand...
Click to collapse
Made in is different than region specific devices. Vietnam is G920F only.
venki5star said:
Made in is different than region specific devices. Vietnam is G920F only.
Click to expand...
Click to collapse
Mind = blown lol
Sent from my SM-G920I using XDA Free mobile app
Try this French 5.1.1 SM-G920F S6 ROM from Sammobile:
http://www.sammobile.com/firmwares/download/48616/G920FXXU2BOFJ_G920FOXA2BOFJ_XEF/
s6
roydok said:
Try this French 5.1.1 SM-G920F S6 ROM from Sammobile:
http://www.sammobile.com/firmwares/download/48616/G920FXXU2BOFJ_G920FOXA2BOFJ_XEF/
Click to expand...
Click to collapse
After installation that rom you linked me did this bootloop anyone knows when will be other region 5.1.1 roms available approximately? will it be during 1 week or so?
Before I installed france 5.1.1 I've installed this rom http://forum.xda-developers.com/galaxy-s6/development/vnrom-s6-g920fxxu1aocv-v1-0-aroma-t3088154
Try reflashing again.
roydok said:
Try reflashing again.
Click to expand...
Click to collapse
tried a lot of times but I think there is something not flashed correctly. But after finishing the process odin says 100% pass.
SOLVED - bootloop after installation france 5.1.1 on G920F
SO who has similar problem I fixed the problem this way.
1) flashed TWRP RECOVERY 2.8.7.1 via ODIN
2) downloaded custom rom XtreStoLite-2.0-Odex-Pure-ROM-Final-XXU2BOFJ
3) flashed it and my phone is alive plus root and TWRP recovery
I have no idea what to do...
So I'm in the same situation as you, I was doing all sorts of flashing and stuff but something went wrong along the way.
So I have the very latest twrp installed and I connected to my pc, yet I can't move files over for some reason.
codewield said:
So I'm in the same situation as you, I was doing all sorts of flashing and stuff but something went wrong along the way.
So I have the very latest twrp installed and I connected to my pc, yet I can't move files over for some reason.
Click to expand...
Click to collapse
you have to use OTG cable and flash the system via usb flash drive like external storage and that's it
Odin fail
k_kasadze said:
After installation that rom you linked me did this bootloop anyone knows when will be other region 5.1.1 roms available approximately? will it be during 1 week or so?
Before I installed france 5.1.1 I've installed this rom http://forum.xda-developers.com/galaxy-s6/development/vnrom-s6-g920fxxu1aocv-v1-0-aroma-t3088154
Click to expand...
Click to collapse
OK so I was on the unbranded S6 920F and as the signal was pretty bad thought I would try the H3G latest stock firmware .on Sammobile.
I am on 3 anyway so hoped that using that firmware the modem may have been better. I did the usual and it failed at the end of the cycle same as you.
Did that several times and tried with smart switch, wasted loads of time then tried the first one that was released for 5.1.1(France) and it passed and booted normally.
Not a clue what happened maybe the H3G Rom BOfj was a corrupted file, though very unusual from sammobile.
Edit.
Ironically the signal actually appears better on the france 5.1.1 than befor on AO3 5.02..will update after a few days
NBB823151 said:
OK so I was on the unbranded S6 920F and as the signal was pretty bad thought I would try the H3G latest stock firmware .on Sammobile.
I am on 3 anyway so hoped that using that firmware the modem may have been better. I did the usual and it failed at the end of the cycle same as you.
Did that several times and tried with smart switch, wasted loads of time then tried the first one that was released for 5.1.1(France) and it passed and booted normally.
Not a clue what happened maybe the H3G Rom BOfj was a corrupted file, though very unusual from sammobile.
Edit.
Ironically the signal actually appears better on the france 5.1.1 than befor on AO3 5.02..will update after a few days
Click to expand...
Click to collapse
Glad to hear another positive bit regarding this firmware on the network reception... I am only holding up from flashing it is root...don't want to trip knox
Related
I have somehow managed to lose my S/N completely from my Sprint S7. Doesn't show in Settings > system status.
Only shows IMEI and MEID info for "#*06#."
Peeled sticker off back like an idiot .
When I 'Home + vol down + pwr' then 'home' only shows MEID
So essentially- in a nutshell- I'm trying to repair my phone with Kies/SS, they are requesting my S/N and none of these numbers work. Somewhere along the way of rooting i wiped my S/N from my S7 no idea how...if anyone could be of any assistance it would greatly be appreciated!
Bnapi92 said:
I have somehow managed to lose my S/N completely from my Sprint S7. Doesn't show in Settings > system status.
Only shows IMEI and MEID info for "#*06#."
Peeled sticker off back like an idiot .
When I 'Home + vol down + pwr' then 'home' only shows MEID
So essentially- in a nutshell- I'm trying to repair my phone with Kies/SS, they are requesting my S/N and none of these numbers work. Somewhere along the way of rooting i wiped my S/N from my S7 no idea how...if anyone could be of any assistance it would greatly be appreciated!
Click to expand...
Click to collapse
Try updating the firmware with Odin and you will be fine! You can download the orig firmwares of sammobile.
Look at the backside about an inch from the bottom. You might need a magnifying glass or a loupe.
RiTCHiE007 said:
Try updating the firmware with Odin and you will be fine! You can download the orig firmwares of sammobile.
Click to expand...
Click to collapse
The most current firmware sam has is outdated right now. I updated my firmware right before so i keep getting a FAIL (AUTH) prompt in Odin...Cause you know i couldn't have made this situation more difficult . & For the numbers on the back of the phone none have worked for smart switch.
UPDATE: Phone is now soft bricked.... No idea how just does a pulsating vibrate loop upon boot.
So where im at now, phones showing an exclamation mark with the use recovery prompt. Have access to download mode. Flashing stock firmware fails through ODIN with (auth) code. No serial number to use kies or SS. The only way to get this OS stable again is through Odin with the most current firmware...which was just released like 2 days ago & I can't find ANYWHERE. otherwise this is a really expensive brick plz help!!!!!
Bnapi92 said:
So where im at now, phones showing and exclamation mark with the use recovery prompt. I have access to download mode. Flashing stock firmware fails through ODIN with (auth) code. No serial number to use kies or SS. I think the only way i can get this OS stable again is through Odin with the most current firmware...which was just released like 2 days ago & I can't find ANYWHERE. otherwise this is a really expensive brick i own plz help!!!!!
Click to expand...
Click to collapse
G930P on Sprint?
Firmware is on sammobile, and will be available with the samfirm tool too
If not G930P, which model S7?
Bnapi92 said:
So where im at now, phones showing and exclamation mark with the use recovery prompt. I have access to download mode. Flashing stock firmware fails through ODIN with (auth) code. No serial number to use kies or SS. I think the only way i can get this OS stable again is through Odin with the most current firmware...which was just released like 2 days ago & I can't find ANYWHERE. otherwise this is a really expensive brick i own plz help!!!!!
Click to expand...
Click to collapse
Well if you have a G930F then i would just download a other region firmware that is newer then yours. This should do the trick and why didnt you keep the box of the phone?
If the S/N eched on the back of the phone doesn't work with SmartSwitch, then there really is something fishy going on. Maybe the phone is blacklisted?
gerhard_wa said:
If the S/N eched on the back of the phone doesn't work with SmartSwitch, then there really is something fishy going on. Maybe the phone is blacklisted?
Click to expand...
Click to collapse
No it is because it is a sprint phone they use DEC not S/N and are not compatible with Smart switch recovery...talked to a rep lastnight stupidest thing I've ever heard.
*Detection* said:
G930P on Sprint?
Firmware is on sammobile, and will be available with the samfirm tool too
If not G930P, which model S7?
Click to expand...
Click to collapse
SM-G930P you're right but as of the other nights update i can't find the most current official firmware that ODIN will authorize.
Bnapi92 said:
SM-G930P you're right but as of the other nights update i can't find the most current official firmware that ODIN will authorize.
Click to expand...
Click to collapse
Might not be on the servers yet, takes a couple days after OTA for the full ROM to hit servers IIRC
Bnapi92 said:
No it is because it is a sprint phone they use DEC not S/N and are not compatible with Smart switch recovery...talked to a rep lastnight stupidest thing I've ever heard.
Click to expand...
Click to collapse
The MEID by DEC replaces the IMEI used in other countries. This is an individual unique identifier related to the cellular networks and is not controlled by Samsung. The Samsung serial number on the other hand is up to Samsung and this is the number you use with SmartSwitch. It could be that Sprint phones are not compatible with SmartSwitch, but this can not have anything to do with the MEID DEC being used instead of IMEI. I would think that the other US networks uses MEID DEC instead of IMEI too and so you mean that they too are incompatible with SmartSwitch?
gerhard_wa said:
The MEID by DEC replaces the IMEI used in other countries. This is an individual unique identifier related to the cellular networks and is not controlled by Samsung. The Samsung serial number on the other hand is up to Samsung and this is the number you use with SmartSwitch. It could be that Sprint phones are not compatible with SmartSwitch, but this can not have anything to do with the MEID DEC being used instead of IMEI. I would think that the other US networks uses MEID DEC instead of IMEI too and so you mean that they too are incompatible with SmartSwitch?
Click to expand...
Click to collapse
I don't mean to assume that it isn't compatible at all, but what the rep told me is that sprint does not use S/N but instead DEC & the DEC # is not compatible with smart switch. It may be compatible but from everywhere I've searched a S/N does not exist for my phone. Spoken to sprint and samsung about it...
UPDATE: further information, my phone was rooted and flashed with ODIN. everything was fine until i went through the steps to re enable my service. i disable a couple things in buildprop.editor, restarted my phone and got stuck in a boot loop. I can access recovery but i flashed twrp so it's custom.
UPDATE: I have gotten the firmware information from sprint. I need the G930PVPS4APJ2 firmware. If anyone can be of assistance with this it isn't available on sam yet.
Bnapi92 said:
UPDATE: I have gotten the firmware information from sprint. I need the G930PVPS4APJ2 firmware. If anyone can be of assistance with this it isn't available on sam yet.
Click to expand...
Click to collapse
Keep checking the samfirm tool, it knows it's ready and displays G930PVPS4APJ2 but with binary error, which usually means soon, just need to check each day
*Detection* said:
Keep checking the samfirm tool, it knows it's ready and displays G930PVPS4APJ2 but with binary error, which usually means soon, just need to check each day
Click to expand...
Click to collapse
Could you link me to where its displayed?
Bnapi92 said:
Could you link me to where its displayed?
Click to expand...
Click to collapse
Looks like it's live on the servers today, go get it
Set up SamFirm like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Detection* said:
Looks like it's live on the servers today, go get it
Set up SamFirm like this
Click to expand...
Click to collapse
I love you, Super thanks!
# HOW TO UNBRICK/ INSTALL STOCK ROM ON SAMSUNG GALAXY S7 / S7 EDGE #1) Download lastest Odin (Link)
2) Download FIRMWARE for S7 / S7 EDGE (Choose your model and country) (Link)
Instructions1) Put your S7 / S7 EDGE in Download mode
- Push and hold VOLUME DOWN + HOME + POWER ON and when you get in press VOLUME UP
2) Open ODIN and connect your S7 / S7 Edge to your computer
- If you dont see THIS then install samsung drivers for your S7 Edge
3) Put the Firmware files in ODIN (Dont use CSC_HOME)
- File that start with AP put in AP bar, BL in BL bar, CP in CP bar and CSC to CSC bar
4) Press START and wait. When procces is done. Unplug your phone and wait, phone will auto boot up! This can take up to 15min
IF YOU HAVE ANY QUESTIONS OR PROBLEMS DURING PROCESS, LEAVE A COMMENT OR CONTACT ME
I have the ATT model I guess. There are no firmware avail at the firmware link for model SM-G935A. ANy sugestions? will this work for this device?
karatche said:
I have the ATT model I guess. There are no firmware avail at the firmware link for model SM-G935A. ANy sugestions? will this work for this device?
Click to expand...
Click to collapse
AT&T S7 Edge (G935A) official firmware
AP Download
BL Download
CP Download
CSC Download
And use Odin 3.12
I believe that the are many guides like this out there, because I already know all of this. Why even bother posting this if I can do all of this more easily with Smart switch?.
And use Odin 3.12 [/QUOTE]
Got the firmware, unzipped it with 7zip. Placed in BL line. Execurtes and after the 12th line it says emmc.appsboot.mbn and then the next line says Fail (Auth)
Ideas?
My device was already soft bricked so I still cannot boot. I can only get to a boot loop or download mode.
TheSproker said:
I believe that the are many guides like this out there, because I already know all of this. Why even bother posting this if I can do all of this more easily with Smart switch?.
Click to expand...
Click to collapse
I'm not familiar with Smart Switch- can you tell me about this? Is this somthing I could use to restore this device?
karatche said:
I'm not familiar with Smart Switch- can you tell me about this? Is this somthing I could use to restore this device?
Click to expand...
Click to collapse
Yes, it is an official Samsung application that lets you restore your device. Just download it on your computer and follow the instructions. Here is the link: http://www.samsung.com/global/download/smartswitchwin/
Hi all !
I did exactly the method described by @Talentooman everything goes well but on reboot the phone arrives until the samsung bootanimation and it does not flash it freezes on samsung bootanimation then it reboot and black blue led display.
stootie said:
Hi all !
I did exactly the method described by @Talentooman everything goes well but on reboot the phone arrives until the samsung bootanimation and it does not flash it freezes on samsung bootanimation then it reboot and black blue led display.
Click to expand...
Click to collapse
check if you download real firmware for your device model, and when the procces is done you must wait for few reboots (mby up to 5min)
Talentooman said:
check if you download real firmware for your device model, and when the procces is done you must wait for few reboots (mby up to 5min)
Click to expand...
Click to collapse
I have flashed that official versions download on sammobile
I have flashed Marshmallow version :
G935FXXS1BPLF_G935FUWA1BPH9_PET don't work after
I have flashed
G935FXXU1BPLB_G935FBOG1BPJ1_BOG
after i have flashed with nougat version officiel :
G935FXXU1DPLT_G935FOXA1DPLT_BTU
SM-G935F - DQC4-XEF
when the procces is done you must wait for few reboots (mby up to 5min)
I waited more than 20, 30 40 minutes and even until the battery finished.
stootie said:
I have flashed that official versions download on sammobile
I have flashed Marshmallow version :
G935FXXS1BPLF_G935FUWA1BPH9_PET don't work after
I have flashed
G935FXXU1BPLB_G935FBOG1BPJ1_BOG
after i have flashed with nougat version officiel :
G935FXXU1DPLT_G935FOXA1DPLT_BTU
SM-G935F - DQC4-XEF
when the procces is done you must wait for few reboots (mby up to 5min)
I waited more than 20, 30 40 minutes and even until the battery finished.
Click to expand...
Click to collapse
did you try with Smart Switch?
Talentooman said:
did you try with Smart Switch?
Click to expand...
Click to collapse
No, but I'll do it right away !
stootie said:
No, but I'll do it right away !
Click to expand...
Click to collapse
i dont know why but for me Smart switch not working
Always the same problem, Smart Switch has to download the firmware then flashed it Always the same problem, Smart Switch has to download the firmware then flashed it then reboot then it froze as I said .....
Always at the start.
stootie said:
Always the same problem, Smart Switch has to download the firmware then flashed it Always the same problem, Smart Switch has to download the firmware then flashed it then reboot then it froze as I said .....
Always at the start.
Click to expand...
Click to collapse
hm i dont know what to say ?
i have tried almost any firmware , btu , germany version , neitherland, pakistan , o2u , its giving error secure checked failed ; (Radio), i have even tried with samsung switch .
i also got its imei info here with a paid service :
Service: Samsung Full Info|Carrier + Warranty Checker
IMEI #: 358809078698703
Details: IMEI Number: 358809078698703
Serial Number: RF8H403J4CZ
Un Number: 988678533931334354
Model Number: SM-G935FZDAO2U
Model Name: SM-G935F
Model Desc: Galaxy S7 Edge
Warranty Status: In Warranty
Purchase Country: England
Warranty Until: 04.01.2018
Purchase Date: 04.01.2016
Production Date: 03.31.2016
Manufacturer: P518 Samsung Electronics Vietnam
Carrier: United Kingdom O2
Sold By: United Kingdom / 02 April 2016
Ship To: United Kingdom / 08 April 2016
its showing o2 here , i have tried nougat 7.0 o2u from sammobile but same issue ?and when i uncheck the modem part in flashing , it successfully flashed and restart but showing no command error on the screen ?
i have posted in many forums , plz help will be appreciated ?
---------- Post added at 02:40 PM ---------- Previous post was at 02:39 PM ----------
Talentooman said:
i dont know why but for me Smart switch not working
Click to expand...
Click to collapse
for me too
stootie said:
Always the same problem, Smart Switch has to download the firmware then flashed it Always the same problem, Smart Switch has to download the firmware then flashed it then reboot then it froze as I said .....
Always at the start.
Click to expand...
Click to collapse
Hey did you end up getting it to work ?
I am having the same problem :/
Firmware for G930T1 request
Hi guys,
I'm looking the properly firmware for Samsung galaxy S7 SM-G930T1 / G930T1UVU4BQG5.
But I confused about model version number/letter means, Does someone tell me where can I download the stock ROM for this mobile?.
Thanks.
It gets stuck..
It gets stuck while on the system.img part of the stock firmware process.. I don't know what to do
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For G935V users here a link I made for a stock zip (December update G935VVRU4BQK4) ... unzip file and just follow OP instructions and you will be out of a brick in no time! No need to wait 2 god damn hours for a file that should take no more than 20mins...
https://mega.nz/#!FyQzgAZZ!Dsu-8rBfJzoIyPA_RUrenpQ_RdBbxhogse8MySGEzYE
Hello Guys. I've been playing around with all available nougat firmwares to get volte working. I succeded using latest BTU firmware and beta 1 files.
I'm not responsible for any issues with phone after using this tutorial. Use at your own risk.
With this configuration Shealth doesn't work. It says device has been compromised. Knox is not tripped but probably the cause is a mix of firmware files from different builds. I am looking for a fix but for now you have to sacrifice Shealth if you want VoLTE working on BTU firmware. Flashing full BTU firmware back is restoring Shealth functionality.
UPDATE - After flashing back DQB3 bootloader VoLTE stays and Shealth start working So flash DQB3 bootloader and DQB1 cp file at the very end to get everything working!!
This tutorial is temporary solution until branded operator firmwares will be released.
So what we need:
Official latest nougat full firmware - DQB3 at the moment
Beta 1 BL, CP, CSC files
Odin
Samfirm
To get VoLTE working follow these steps:
Enable oem unlock so you can use odin to flash firmwares (oem unlock is in developer options - enable them tapping About device/software info/Build number few times).
Flash full latest Nougat BTU firmware - (available on samfirm)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After flashing completed, skip all configuration because phone will be factory resetted again when you flash beta files. Now flash Nougat beta BL, CP, CSC which are available here: Beta files
After flashing configure phone as normal (i skipped restore settings in samsung cloud just in case of something overwritten).
Flash back Stock Nougat DQB3 bootloader.
Enjoy working VoLTE on latest BTU firmware
If I helped you, click thanks button
Thanks I'm doing this later.
If I'm already running on DBQ3 do I need to do the first bit?
thanks bro.... turkey s7 edge developers
VoLTE being enabled is in the CSC file only
There is no need to do this double flashing technique.
Stock Nougat BL
Stock Nougat AP
Stock Nougat CP
BETA 1 CSC
One time flash, finished
Galactus said:
VoLTE being enabled is in the CSC file only
There is no need to do this double flashing technique.
Stock Nougat BL
Stock Nougat AP
Stock Nougat CP
BETA 1 CSC
One time flash, finished
Click to expand...
Click to collapse
nope, i tried many times. Only flashing csc doesn't bring me volte. Only when i did what i stated in tutorial volte started working. So looks like if it working in your case doesn't mean it will work for all people. My method will i believe
chrissyyyw said:
Thanks I'm doing this later.
If I'm already running on DBQ3 do I need to do the first bit?
Click to expand...
Click to collapse
No need, flash bl cp csc only. It will reset your phone.
Pichulec said:
nope, i tried many times. Only flashing csc doesn't bring me volte. Only when i did what i stated in tutorial volte started working. So looks like if it working in your case doesn't mean it will work for all people. My method will i believe
Click to expand...
Click to collapse
Strange, flashing Nougat files + BETA 1 CSC once has worked for other people in the EE thread. It is well known that all the code needed to enable VoLTE and WiFi calling sits in the CSC file, hence why most guides suggest you flash all 4 files in ODIN but use the CSC file of your choice for carrier settings. If the user is rooted, simply extracting the CSC folders from the CSC image and dropping it into /system is enough and doesn't require any specific ODIN flashed bootloader or modem file.
Mixing different system image and bootloader files isn't really recommended
Galactus said:
Strange, flashing Nougat files + BETA 1 CSC once has worked for other people in the EE thread. It is well known that all the code needed to enable VoLTE and WiFi calling sits in the CSC file, hence why most guides suggest you flash all 4 files in ODIN but use the CSC file of your choice for carrier settings. If the user is rooted, simply extracting the CSC folders from the CSC image and dropping it into /system is enough and doesn't require any specific ODIN flashed bootloader or modem file.
Mixing different system image and bootloader files isn't really recommended
Click to expand...
Click to collapse
I've got the latest DBQ3 Nougat BTU firmware on my S7 Edge at the moment. If I flash BETA 1 BL, CP and CSC is there a chance i'll brick it?
chrissyyyw said:
I've got the latest DBQ3 Nougat BTU firmware on my S7 Edge at the moment. If I flash BETA 1 BL, CP and CSC is there a chance i'll brick it?
Click to expand...
Click to collapse
Nope, it's working fine. Tested on my device.
Update in the first post!! S health is working
For testing purposes i flashed as well DQB1 CP file, volte still works.
Pichulec said:
For testing purposes i flashed as well DQB1 CP file, volte still works.
Click to expand...
Click to collapse
Like I said before, of course it would. VoLTE does not depend on the modem or the bootloader.
ALL of the code enabling VoLTE is in the CSC file
I have followed instructions on post 1 on my s7 edge dual sim on 3UK but still not getting Volte - can anyone help?
It is hard to say why you not getting it. Solution worked in my case but im on EE uk. I tried hard and no other solution worked for me.
Did you flash full dqb3 rom first? And then those 3 files?
Flashed from MM to Nougat, with original BTU file from sammobile and VoLTE worked in an instant.
so i think it the depends on where you live
Pichulec said:
It is hard to say why you not getting it. Solution worked in my case but im on EE uk. I tried hard and no other solution worked for me.
Did you flash full dqb3 rom first? And then those 3 files?
Click to expand...
Click to collapse
Yes I did. Is there an option you need to activate within the software?
Nope, it should activate itself when available.
Pichulec said:
Nope, it should activate itself when available.
Click to expand...
Click to collapse
Are you using a dual sim s7 edge?
no
Hi. Do we have any solutions for S7 Edge TMobile being used in India?? I bought 935T wasnt able to use volte, flashed 935U still unable to use volte. Currently using a work around of using a carrier app VoiceJio to make and recve calls... Any solutions on how to gt the volte working in India??? Please help..
This is snapdragon device, i cant help you my friend.
Hello All,
I have S6 duos SM-G9200, its comes with andoid verion 6.1 Hong Kong TGY, all applications are works correctly same google application, but the big problem is the battery disharging very quick (7% per hour) even the mobile is in sleep mode.
when i flashe it with China verion CHC 6.1 the problem of battery is solved but google applications and some applications not works correctly.
I want to convert the firmware from android verion 7.0 china CHC (G9200ZCU2EQH1) to Hongkong TGY.
I have tried the TGY firmware G9200ZHU2EQJ1 and G9200ZHU2EQH2
Also i have tried flashing by 4 files but i doesnt work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
in addition, unlock OEM option is not available, and i try with CR service CRROM, and it say that its unlocked but right now i cant flash the 4 file
may i flash my mobile by TGY version? Please help me
please, anybody can help me?
First of all, download your firmware from Sammobile or Updato.
Also Home_CSC flashes without wiping / factory resetting the phone. CSC wipes the phone / factory reset. Up to you which one you want to use.
benjamen50 said:
First of all, download your firmware from Sammobile or Updato.
Also Home_CSC flashes without wiping / factory resetting the phone. CSC wipes the phone / factory reset. Up to you which one you want to use.
Click to expand...
Click to collapse
Hi benjamen50,
I have downloaded TGY firmware from sammobile and from Updato application, also, i download the 4 files by usinf SamFirm application, but when i flash by Odin there is PIT file error, so i cant flash this mobile to TGY firmware.
I am wondering why set PIT fails, could perhaps be bad charger port, cable or usb port on computer?
room cook SM-G9200 duos sim China
forum.xda-developers.com/galaxy-s6/general/recovery-s6-duos-sim-sm-g9200-9208-9209-t3716760
CMW G9200 CHC: mediafire.com/file/e969yc13d46m5eu/G9200-PC1-TWRP-3.0-PC1.tar
Room cook androi 7.1 mod 8.1:
Battery Problem SM-G9200 CHC Android Version 5.0.1 Lollipop
Let me know if you solve your problem, i have same problem in my phone SM-G9200 CHC quick battery low even in sleep mood and screen is off.
riane said:
Hi benjamen50,
I have downloaded TGY firmware from sammobile and from Updato application, also, i download the 4 files by usinf SamFirm application, but when i flash by Odin there is PIT file error, so i cant flash this mobile to TGY firmware.
Click to expand...
Click to collapse
benjamen50 said:
I am wondering why set PIT fails, could perhaps be bad charger port, cable or usb port on computer?
Click to expand...
Click to collapse
My cable and my usb port are good
because when the flash of TGY PIT file is successful, but when i try to flsh the CHC PIT file, it appear on my mobile SECURE CHECK FAIL PIT
I dont know if my S6 duos SM-G9200 assigned to china or to Hong kong, how can I know that? i have a model number, serial number
please, anybody can help me?
riane said:
please, anybody can help me?
Click to expand...
Click to collapse
please, anybody can help me?
riane said:
please, anybody can help me?
Click to expand...
Click to collapse
Hi friend,
I have same problem with you on my S6 G9200 phone, but still not have any way to fix PIT FAIL ERROR, i flashed TGY Rom many times before.
And then I find this Rom, it's so good for me. Now i share it here, you can download and try to use if need.
Rom flash through Recovery: https://drive.google.com/file/d/1cKUkNQBb-sqqr0hmRj9NB7sGVePSjqWV/view?usp=sharing
Recovery: https://drive.google.com/file/d/0B3lKG69W6panSG1OLVpZTEpKYlE/view?usp=sharing
After flashed ROM, restart system all into Phone Screen. Run this CH Play apk file and your phone will have CH Play normally.
https://drive.google.com/file/d/0B3lKG69W6panYl9lTzZCZlY2Y3M/view?usp=sharing
Notice: Don't flash more anything.
Have fun
chauchibang said:
Hi friend,
I have same problem with you on my S6 G9200 phone, but still not have any way to fix PIT FAIL ERROR, i flashed TGY Rom many times before.
And then I find this Rom, it's so good for me. Now i share it here, you can download and try to use if need.
Rom flash through Recovery: https://drive.google.com/file/d/1cKUkNQBb-sqqr0hmRj9NB7sGVePSjqWV/view?usp=sharing
Recovery: https://drive.google.com/file/d/0B3lKG69W6panSG1OLVpZTEpKYlE/view?usp=sharing
After flashed ROM, restart system all into Phone Screen. Run this CH Play apk file and your phone will have CH Play normally.
https://drive.google.com/file/d/0B3lKG69W6panYl9lTzZCZlY2Y3M/view?usp=sharing
Notice: Don't flash more anything.
Have fun
Click to expand...
Click to collapse
Thanks chauchibang,
Is it a good ROM? are there any error messages? is google play stor installed on this ROM?
Ah…How do you flash CHC g9200 to TGY one？
They are even not a same modern
I can suggest you some great third-party TW-based roms made from Chinese devs as you can contact me by telegram
Just search @watsonpeanut
So I wanted to try something so I flashed the Brazil ROM. tried to flash back to XEO but now in the settings it says "SER/SER,SER/XEO" and when resetting installs Russian bloatware. What can I do to restore the XEO ROM?
Dis you do a factory reset?
physwizz said:
Dis you do a factory reset?
Click to expand...
Click to collapse
yeah i did but its still stuck with ser csc
Flash stock ROM
@Malware said:
Flash stock ROM
Click to expand...
Click to collapse
did that many times but it still didn't change but for now im okay with it just disabled updates so i wont get stuck with russia rom without an option of downgrading via alliance shield x and it works fine
hxudsh said:
did that many times but it still didn't change but for now im okay with it just disabled updates so i wont get stuck with russia rom without an option of downgrading via alliance shield x and it works fine
Click to expand...
Click to collapse
That is weird. Full Brazilian stock firmware set? AP, BL, CP and CSC_OMC_ODM? Once the device is restarted after flashing get into the recovery straight away (hold power + volume up with the USB cable connected to PC). Don't let it boot Android! In the recovery do Factory Reset, format the data partition (if it's possible in the stock recovery, I don't remember) and wipe all the caches and only then boot the system. Also try removing the SIM card before flashing and also do the first boot of Android without SIM (although it shouldn't matter but who knows).
uluruman said:
That is weird. Full Brazilian stock firmware set? AP, BL, CP and CSC_OMC_ODM? Once the device is restarted after flashing get into the recovery straight away (hold power + volume up with the USB cable connected to PC). Don't let it boot Android! In the recovery do Factory Reset, format the data partition (if it's possible in the stock recovery, I don't remember) and wipe all the caches and only then boot the system. Also try removing the SIM card before flashing and also do the first boot of Android without SIM (although it shouldn't matter but who knows).
Click to expand...
Click to collapse
yeah it was the full set but it also didnt fix it but im fine with it unless as my sim card and mobile data will stop working but currently even volte is working so im fine with it
hxudsh said:
yeah it was the full set but it also didnt fix it but im fine with it unless as my sim card and mobile data will stop working but currently even volte is working so im fine with it
Click to expand...
Click to collapse
I remember that when I did disassembling of the Prism partition of different country versions I've discovered that most of the European firmwares contain the full set of Russian bloatware. In fact, all the firmwares with the size of more than 5 GB are all nearly identical in regards of bloatware included. So I can suggest you to temporarily install a Nepal or Papua New Guinea firmware, do the factory reset with it, go fully through the setup process, and then try again to flash the Brazilian version. It may help. Or you can stay with the Nepalese firmware, it's quite minimalistic and includes Samsung Pay (if you need it).
uluruman said:
I remember that when I did disassembling of the Prism partition of different country versions I've discovered that most of the European firmwares contain the full set of Russian bloatware. In fact, all the firmwares with the size of more than 5 GB are all nearly identical in regards of bloatware included. So I can suggest you to temporarily install a Nepal or Papua New Guinea firmware, do the factory reset with it, go fully through the setup process, and then try again to flash the Brazilian version. It may help. Or you can stay with the Nepalese firmware, it's quite minimalistic and includes Samsung Pay (if you need it).
Click to expand...
Click to collapse
ok but the m127f model doesnt have a nepal or papua new guinea firmware
Try Bolivia: https://samfw.com/firmware/SM-M127F/BVO
The general rule of thumb is the smaller firmware is the less bloated it is. Also prefer firmware for the poor and commercially unpromising countries, the so-called "3rd world".
sorry for reviving this thread but is there a way to get lte back? all i want is "good" mobile data and lte works good on my huawei, so can i get it back on my samsung without somehow changing the csc? (the carrier i use is Play in Poland)
after around 8 months, today i finally got my lte back via the samfw frp tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}