Database Info

★★★ FLY UI ROM 4.2.2 ★★★

This rom is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Code:
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
Installation:
Enter CTR Recovery
Take A BackUp of the current ROM you are using.
Now, Wipe Data/Factory Reset.
Wipe Dalvik Cache Advanced Options
Flash the rom
Flash gapps
reboot and enjoy
DOWNLOAD LINK
Code:
https://mega.co.nz/#!aVFxRY7a!SprH6-ElOhoNBDT4nJlZcYkcweQWp5w5ulRowI_y_iM
GAPPS LINK
Code:
http://goo.im/gapps/gapps-jb-20130812-signed.zip
Note:-
This is still in Beta Phase but i have tried my best to check/test the ROM but still don't expect it to be a bugless ROM though it is good enough to use as a daily driver
Click to expand...
Click to collapse
IF YOU LIKE MY WORK DON'T SAY JUST PRESS THANKS BUTTON
Here is the patch for Google play store
https://mega.co.nz/#!SNdQ0JgA!DfZxQ0ikvZ9gqcxOhRL1_WetWLuy_F5b-ChNHuCOYnc
XDA:DevDB Information
[ROM] ★★★ FLY UI ROM 4.2.2 ★★★ | Pure CM UI | ULTRA LIGHT|, a ROM for the GiONEE M2
Contributors
arnabgharay
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2014-04-17
Last Updated 2014-04-18

FOR patches

It is for Gionee M2 ???

Any Screen shots or videos of the ROM looks o.o? because i've never heard of the ROM so i wouldn't want to flash something and not like how it looks :|

after taking a look at the build.prop file i don't think this will even boot...
reported...

OK folks, we are here for development. So, let's help the op in the plight. If it cannot be successful, let moderating staff know then.
And remember, when you flash anything, you take chances.

good effort
please upload the screen shots of ur rom that will be greatly admired by all the custom rom lovers and u are the first customizer for gionee e7

here is the link for those who want to know FLY UI ROM
http://www.miui.com/thread-1619791-1-1.html

hackvier1 said:
It is for Gionee M2 ???
Click to expand...
Click to collapse
Ya sry for posting e7... i will remove it soon as possible

Mods kindly close the thread and remove the links or shift it to the respective forum as this rom is not e7 rom!

hackvier1 said:
It is for Gionee M2 ???
Click to expand...
Click to collapse
ya bro it is for m2

Dev its not working ....after installing just a bootlogo of android then blank ...anyway thanks for hardwork but sorry this time

It's working in my phone and currently I'm using this rom. So, might be your downloading was not proper or there could be some other reason for it's not going ahead of logo?
And you flashed it in Gionee M2, right? It's not for Gionee E7, bro.

[ROM] [UNOFFICIAL] [STABLE] [MI4/LTE] ParanoidAndroid | AOSPAL 5.1 |

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi. I build the AOSPAL for Xiaomi Mi4(LTE)
This version is UNOFFICIAL,but It's stable on my test.
About change log, I only write what I add or delete .the rest is same as PA's official release.
Installation instructions
Code:
1. Make a Nandoid Backup before all !
2. Be rooted
3. Have a custom recovery installed
4. Have flashed the Extended Partition Zip
5. Download the ROM
6. Download gapps (recommended: TK GApps ones)
7. Reboot into recovery and perform a full wipe (for the first installation. Dirty flash should work for updates)
8. Flash the ROM
9. Flash the gapps
11. Reboot and enjoy ! The first boot is longer than the others
Changelog
Code:
Add LockClock widget from CM
Add Supersu (thanks AICP)
Add LTE option for Mi4 LTE
Remove ParanoidAndroidOTA ( UNOFFICIAL doesn't need this)
Translate some strings to Chinese :cyclops:
Sync with PA's update
XDA:DevDB Information
ParanoidAndroid, ROM for the Xiaomi Mi 4
Contributors
P013onEr
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-07-23
Created 2015-07-23
Last Updated 2015-07-23

Sources:
https://github.com/P013onEr
Download link:
ROM : https://www.androidfilehost.com/?w=files&flid=35765 (last uploaded one recommended)
GApps : http://forum.xda-developers.com/android/software/tk-gapps-t3116347
Thanks to:
Bitti09 and BaNks for providing their device and vendor trees
audahadi and TeamHorizon for the Kernel
SynnyG (Official cancro Maintainer)
CM
AICP

I dont if I should ask here, but do I need to re-partition the stock partitions as its needed for CM12? Thanks for your work.

please, upload some screenshots for this ROM.
Does this ROM have sweep2wake function in kernel ?
How about battery consumption ?
Thanks!

Let's try it shall we

any experience with this? Anyone like to share?

Unfortunately Setting has stop
Error show up, when clicked on battery icon in notification and in setting in battery option.
Every thing else is working fine.Just the first day of use,
Any fix for this the error and thank you for the rom

Excuse me for the question that may seem a bit absurd, but is there any problem in using this blunt in a 3G terminal?

In this rom work ir blaster of mi4, and FM?

just wanted to ask for below three things if it works i wonna try this out
plz let me know
IR blaster
camera
FM

http://www.androidauthority.com/paranoid-android-calling-it-quits-648429/
Paranoid Android is dead, probably not worth trying anymore.

Hi! this ROM dont will have more updates ???

murcianista said:
Hi! this ROM dont will have more updates ???
Click to expand...
Click to collapse
Would you mind reading the post above you??

diongdyh said:
Would you mind reading the post above you?
Click to expand...
Click to collapse
oh!! thanks! sorry!
whats a pity !

After first boot,the data works but when I switch it off once and then switch on,it doesnt work neither in 2G nor 3G mode even after rebooting multiple times.Had to reinstall rom but same thing happens again.Whats wrong?

Here Maps Offline Working ?
Can someone check if Here Maps Offline is working and the GPS is locking properly ? It would be very helpful

[ROM][CM12.1][YOG4P] NightShot - Unofficial CyanogenMod Snapshot [falcon]

Check official CyanogenMod thread (nightly)
I made this ROM only for me because I want a "more stable" CM rom and I share it "as is", if you don't like my work, go away.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
NightShot is an hybrid rom based on cyanogenmod snapshot with falcon/msm8226 nightlies, because they are no official snapshot for falcon. It's a unmodified cyanogenmod rom, no tweak, no modification.
Concretely you have the advantage of snapshot but with unstable falcon specific code.
I release update when a new cm snapshot is available and sometimes update falcon source for bug fix.
I have nothing else to say, it's just CyanogenMod.
Download : CM12.1 NightShot
Google apps : Opengapps
If you want root : supersu
Official snapshot released : https://download.cyanogenmod.org/?device=falcon
Sources :
- CyanogenMod 12.1 (YOG4P) : https://github.com/CyanogenMod/android/tree/stable/cm-12.1-YOG4P
- CMUpdater (for specific update url) : https://github.com/hmsintrepide/android_packages_apps_CMUpdater
XDA:DevDB Information
[ROM][CM12.1][YOG4P] NightShot - Unofficial CyanogenMod Snapshot [falcon], ROM for the Moto G
Contributors
Quentinga, CyanogenMod
Source Code: https://github.com/hmsintrepide
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 41.18
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Current Stable Version: 12.1-YOG4PSR2
Stable Release Date: 2015-10-07
Created 2015-10-04
Last Updated 2015-11-17

Reserved
CHANGELOG
2015/11/17 : Official snapshot
2015/10/07 : cm-12.1-20151007-SNAPSHOT-YOG4SR2-falcon
Yes, I forget the "P" !
Based on CM 12.1 YOG4P 2015/10/07 (2nd 5.1 snapshot)
2015/10/04 : cm-12.1-20151004-SNAPSHOT-YOG4PSR1-falcon
No need to update, same as 2015/10/03 build, just set channel to snapshot
Set CM_BUILDTYPE to SNAPSHOT
2015/10/03 : cm-12.1-YOG4PSR1-falcon
Use CM 12.1 YOG4P source (first android 5.1 snapshot)
With 2015/10/03 cm falcon source
Custom CMUpdate api (git)

none

Downloading.... Hope there will not be any bug.. :good:

what about ambient display and is it facing random reboots ?

navaneethkom said:
Downloading.... Hope there will not be any bug.. :good:
Click to expand...
Click to collapse
I don't now (today), if there are some bug, I think you have the same falcon specific bug as nightly (if there any) without cm general (for all devices) nightly bug.
bloodhound42 said:
what about ambient display and is it facing random reboots ?
Click to expand...
Click to collapse
ambiant display is not available, same as nightly.

the download link is to slow..

roshan2989 said:
the download link is to slow..
Click to expand...
Click to collapse
I add mirror, check xda-dev download section.

Excelent! Thank you a lot!

Thank you so much!

New snapshot released!

@juancmb yes, it's OTA time !
New cm 12.1 snapshot YOG4PSR2 based on 2015/10/07 source.
EDIT : I forgot the "P" of "YOG4P", it's a mistake

Thank you so much! [emoji16] [emoji106]

does this have the random reboots?

T4t4nk4881988 said:
does this have the random reboots?
Click to expand...
Click to collapse
When I used the "nightly" I had not noticed reboot, I learned on xda. Since October 3, I've had no reboot.
I can't say if you will have reboot, you can backup and try.

Is dual sim supported?
Sent from my Moto G using Tapatalk

B44Z said:
Is dual sim supported?
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Same as official, I think it's no.

Quentinga said:
Same as official, I think it's no.
Click to expand...
Click to collapse
Official CM12.1 supports Dual from a long time..

@B44Z
salmanhacker said:
Official CM12.1 supports Dual from a long time..
Click to expand...
Click to collapse
Ok, I can just say, same as official, YOG4P snapshot are based on 5.1.1 LMY48B and if old LMY48B nightly have dual sim, I think it work.

Quentinga said:
@B44Z
Ok, I can just say, same as official, YOG4P snapshot are based on 5.1.1 LMY48B and if old LMY48B nightly have dual sim, I think it work.
Click to expand...
Click to collapse
dual sim working perfect

[ROM] [6.0.1] Unofficial Paranoid Android - Jiayu S3 Plus

Paranoid Android is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial Build of Paranoid Android MM for Jiayu S3 plus (not advanced or basic), with mt6753 soc
​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download ROM from here: https://www.facebook.com/MediatekAndroidDevelopers/
OR from xda DevDB
Download Gapps from Banks Gapps: http://download.dirtyunicorns.com/files/gapps/Banks/
Boot to recovery
Wipe data if you are not coming from Paranoid Android already
Install rom and gapps
Reboot
XDA:DevDB Information
Paranoid Android for S3 Plus, ROM for all devices (see above for details)
Contributors
fire855, superdragonpt, DerTeufel1980
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android 5.x.y installed, custom recovery installed
Version Information
Status: Stable
Created 2016-07-26
Last Updated 2016-07-26
XDA:DevDB Information
[ROM] [6.0.1] Unofficial Paranoid Android - Jiayu S3 Plus, ROM for the JiaYu S3
Contributors
fire855
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2018-03-09
Last Updated 2018-03-09

Changelog / Patch's
Changelog:
Build 2: 20160814
fixed Bluetooth connection
fixed Wifi drops
added option to select 2.4 or 5Ghz Wifi frequency to advanced wifi options
fixed operator network search
fixed device encryption
all updates from AOSPA (incl. security updates)

Minimal F.A.Q
Q: After ROM boot up, I'm getting SetUP wizard errors / other Gapps FC / Black screen on first boot, why ?
A: On marshmallow based Roms, you need to flash ROM and gapps at the same time
TWRP even allows you to flash multiple .zip files
Q: Why no Mediatek Engineering Menu?
A: Its Mediatek proprietary, ugly , not needed on our builds.
Relevant features used on Mediatek E. Menu have been ported to our builds already using aosp / our implementations ( Sensors calibration , Band Mode, etc)
Q: Do we get The Fast Charge you guys made on Lollipop RC's ?
A: Yes, Fast Charge implementation was implemented on our MM builds
Q: App "x" is not working, why?
A: First make sure the app works under Marshmallow
Q: Something wrong with my Bluetooth, can't connect /pair with my "x" device , car-BT
A: Bluetooth should be backwards compatible , some OEMs don't also follow some guidelines , surely can be improved.
Post your BT model, Car model and year to help us out determining compatibility issues

ParanoidAndroid is back! With great device. Thank you.

Excellent work as always!

Rom is up on Xda DevDB also
have funn

Just flash from twrp or spflashtools?
Sent from my JY-S3 using Tapatalk

nggies said:
Just flash from twrp or spflashtools?
Sent from my JY-S3 using Tapatalk
Click to expand...
Click to collapse
TWRP

fire855 said:
TWRP
Click to expand...
Click to collapse
Thanks for your clue and support for our device...
Sent from my JY-S3 using Tapatalk

nggies said:
Thanks for your clue and support for our device...
Sent from my JY-S3 using Tapatalk
Click to expand...
Click to collapse
This is for S3Plus man, you have the S3 MT6752 right?

genesisalgor said:
This is for S3Plus man, you have the S3 MT6752 right?
Click to expand...
Click to collapse
Yeah.. I have Mt6752, too many miracle today makes me confused. But still same procedure installation. [emoji2]
Sent from my s3 using Tapatalk

Tried AOSPA on Jiayu S3 Plus and it works like a charm. It feels amazing that the gyroscope problem is finally fixed and that we have fast charging available
Sincere gratitude to all the devs!

*wrong thread

Battery is having a strange behavior after installing this rom on S3 Plus. It charges only to around 85% and doesn't go above that.

Latest twrp recovery, compiled from source:
https://www.androidfilehost.com/?fid=24591000424954599
- fix: mounting adoptable storage
- fix: mounting encrypted devices
The M.A.D. Team

AOSPA update released: https://www.facebook.com/MediatekAndroidDevelopers/
Changelog:
- fixed Bluetooth connection
- fixed Wifi drops
- added option to select 2.4 or 5Ghz Wifi frequency to advanced wifi options
- fixed operator network search
- fixed device encryption
- all updates from AOSPA (incl. security updates)

Rom build is now also available to download on xda DevDB
cheers

not sure if im the only one , but unable to flash latest version pa_s3plus_n560a-6.0.3-20160814.zip (downloaded from xda)
- on latest fire855 twrp 3.0.2
wipe to install new rom
rom starts installing but gets stuck around 4/5 of the bar for over an hour
managed to flash CM13 though.

Thanks for developing roms for this phone.
Does anyone know if this rom face the same problems as CM13? (GPU problem. no hardware acceleration, problem with videos in html5 720p, 1080p and so on)?

[ROM] Unoffical CM13.0 for Huawei Y6 DISCONTINUED

Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Devices Confirmed working:
SCL-L01
SCL-L02
SCL-L03
Features:
Based on CyanogenMod 13.0 - Android 6.0.1 Marshmallow
Custom ROM developed for Qualcomm Snapdragon 210 (msm8909) processor.
First Android Marshmallow ROM released for Huawei Y6.
Rom Download: XDA DevDB
Installation:
Ensure you have unlocked bootloader (there are many guides on how to check this) if you need a code go here, Emui Download Page click unlock bootloader and login with either facebook or phone account to obtain your code.
Install working TWRP recovery from: XDA DevDB
Download ROM from above link.
Download Open Gapps from http://opengapps.org/, select arm, 6.0 and then your preferred package (I use the aroma installer because it includes needed webview, see issues)
Boot into TWRP, perform backup (always backup!!!), wipe data/factory reset, flash ROM zip and reboot.
First boot may take quite a while.
Dual Sim users:
Grap dualsimfix and flash it after installing the rom, but before installing gapps.
Known issues:
Camera is not working
Sources available on GitHub:
Device Files
Vendor Files
Kernel Source
Wifi Driver
Credits to Cyanogenmod for making this possible.
XDA:DevDB Information
Cyanogenmod 13.0 for Huawei Y6, ROM for the Android General
Contributors
Runner85sx, DestructoSphere, giorgio130
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: Initial 2016-11-23
Stable Release Date: 2016-11-23
Created 2016-11-24
Last Updated 2017-09-25

Reserved

reserved

Great, let's try

Welcome back runner85sx

dondo85 said:
Welcome back runner85sx
Click to expand...
Click to collapse
Thanks dondo85.

Thanks for your work guys (runner85sx & DestructoSphere).

Please confirm wich device is working with what. So we can continue our work on that.

Huawei Y6 SCL-L01 works

L01
Another working l01 here. Everything very smooth, yet small bugs.
Thanks you!

Dual Sim Fix my SCL-L21 does not work, he installed three times and unfortunately not working.

Yet Another huawei scl-l01 device here; very good rom, runs fast, very fast..,looks great, waiting for camera fix ...good job )
Edit: when i call someone the other person does not heard me, and i dont heard her

Raduz71 said:
Dual Sim Fix my SCL-L21 does not work, he installed three times and unfortunately not working.
Click to expand...
Click to collapse
Model scl-u23 dual sim doesnt work...

Dual sim fix doesn't work on my stl-tl00h, still no singal(it says no sim)

I am glad that the problem is not just on my smartphone. Anyway, great job and I look forward to bug fixes.

Hi tnx for created this ROM
But camera and simcard not working
Scl u31 is my device

If the camera is fixed this is almost daily driver ready. Keep up the good work man

Can someone please test if this zip fixes autorotation after sleep issue?
Go to recovery, flash it, reboot, check rotation, lock phone while unplugged, wait at least 10 seconds, unlock, check rotation. Thanks guys.
Btw I will not respond to private messages regarding bugs that is what this thread is for.

Scl-u23 Signal not working ... Can fix? Pls

Probare
zoztik said:
Scl-u23 Signal not working ... Can fix? Pls
Click to expand...
Click to collapse
Ya lo probaré de me tiempo una hora