This rom is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Code:
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
Installation:
Enter CTR Recovery
Take A BackUp of the current ROM you are using.
Now, Wipe Data/Factory Reset.
Wipe Dalvik Cache Advanced Options
Flash the rom
Flash gapps
reboot and enjoy
DOWNLOAD LINK
Code:
https://mega.co.nz/#!aVFxRY7a!SprH6-ElOhoNBDT4nJlZcYkcweQWp5w5ulRowI_y_iM
GAPPS LINK
Code:
http://goo.im/gapps/gapps-jb-20130812-signed.zip
Note:-
This is still in Beta Phase but i have tried my best to check/test the ROM but still don't expect it to be a bugless ROM though it is good enough to use as a daily driver
Click to expand...
Click to collapse
IF YOU LIKE MY WORK DON'T SAY JUST PRESS THANKS BUTTON
Here is the patch for Google play store
https://mega.co.nz/#!SNdQ0JgA!DfZxQ0ikvZ9gqcxOhRL1_WetWLuy_F5b-ChNHuCOYnc
XDA:DevDB Information
[ROM] ★★★ FLY UI ROM 4.2.2 ★★★ | Pure CM UI | ULTRA LIGHT|, a ROM for the GiONEE M2
Contributors
arnabgharay
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2014-04-17
Last Updated 2014-04-18
FOR patches
It is for Gionee M2 ???
Any Screen shots or videos of the ROM looks o.o? because i've never heard of the ROM so i wouldn't want to flash something and not like how it looks :|
after taking a look at the build.prop file i don't think this will even boot...
reported...
OK folks, we are here for development. So, let's help the op in the plight. If it cannot be successful, let moderating staff know then.
And remember, when you flash anything, you take chances.
good effort
please upload the screen shots of ur rom that will be greatly admired by all the custom rom lovers and u are the first customizer for gionee e7
here is the link for those who want to know FLY UI ROM
http://www.miui.com/thread-1619791-1-1.html
hackvier1 said:
It is for Gionee M2 ???
Click to expand...
Click to collapse
Ya sry for posting e7... i will remove it soon as possible
Mods kindly close the thread and remove the links or shift it to the respective forum as this rom is not e7 rom!
hackvier1 said:
It is for Gionee M2 ???
Click to expand...
Click to collapse
ya bro it is for m2
Dev its not working ....after installing just a bootlogo of android then blank ...anyway thanks for hardwork but sorry this time
It's working in my phone and currently I'm using this rom. So, might be your downloading was not proper or there could be some other reason for it's not going ahead of logo?
And you flashed it in Gionee M2, right? It's not for Gionee E7, bro.
Related
OMNI ROM
ANOTHER KITKAT
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
>>>This Rom Is For Devs Only,Not Meant For Daily Use
What Is Omni Rom Project
The goal of Omni is to experiment with Android development because we enjoy it. Omni isn’t better, just different. It’s another option for the billion Android users out there. Android (vs. iOS and every other mobile OS) has thrived on options as well as the gigantic, talented development community that has emerged to build those options. That’s the beauty of Android – that you can pick and choose from a smorgasbord of devices with varying features and functionality.
Omni is a chance to get involved, no matter who you are. Developers, whether you’ve been developing apps for a week, or ROM features for 3 years, you’re welcome. Users, we know you want to help out, and now you can – Omni actively encourages bug reports and feature requests, which can be added to our publicly accessible roadmap. What’s the point in giving you a ROM, and forcing you to not tell us about any bugs you find?
We also recognise how people use Custom ROMs – we’re all custom ROM users and developers ourselves – the argument that “nightlies are not for end users” is over-used, and no longer valid. We’ve found that the vast majority of users want to get nightly updates to their ROM. For that reason, nightlies aren’t a playground – nightlies are for new features that are finished. You should be able to expect the same stability and reliability from a nightly as you would from a “release” ROM, and can report any bugs that prevent this from happening.
We know not everyone wants to update their ROM daily, and you are free to update as frequently or infrequently as you like. Omni is about flexibility and giving users what they expect – and we are excited to see where the community goes with it.
WHAT WORKS:--
-Device Boots Up
-Touch Works
-Sound Works
-ADB Works
-SIM 1 NETWORK (Fluctuating)
-Omni Switch
What doesn't work:
- everything else: 2nd sim card, camera, (hw) video decoding, GPS, BT,WIFI,FM radio, hw composer, rest of MTK specifics.
Downloads
omni-4.4.2-A110Q.zip
>>::NSTRUCTIONS::<<
Place the zip file in sdcard.
Reboot to recovery (CWM)
Wipe data/factory reset.
Wipe dalvik Cache.
Install omni-4.4.2-A110Q.zip and gapps.
Reboot!
Credits
Faea Mobile OMNI ROM project.
Dr. Shadow
Kashifmin for Custom kernel For A110Q
I am taking no credits For this Rom,all credits goes to Origianal developer and our kernel developer.I just ported this.
Kernel: https://github.com/kashifmin/KashKernel_4.2
Device: https://github.com/chrmhoffmann/andr..._wiko_stairway
Android: https://gerrit.omnirom.org/#/q/topic:mt6589,n,z - more to come
XDA:DevDB Information
OMNI ROM , ROM for the Micromax Canvas 2 Plus A110Q
Contributors
digyvijaykumar123
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: OMNI
Version Information
Status: Alpha
Created 2014-04-03
Last Updated 2014-07-18
reserved
Yeah, we need KitKat soon. If I can help you, I will.
supersapien said:
Yeah, we need KitKat soon. If I can help you, I will.
Click to expand...
Click to collapse
ok i will upload it soon and you can try what you can do.You can also try your luck with CM 10.2 And CM 11.
digyvijaykumar123 said:
ok i will upload it soon and you can try what you can do.You can also try your luck with CM 10.2 And CM 11.
Click to expand...
Click to collapse
Do you have MTK6589M source code? If yes, please share on the forum. Our work will become very easy. I'm not able to find authentic sources.
supersapien said:
Do you have MTK6589M source code? If yes, please share on the forum. Our work will become very easy. I'm not able to find authentic sources.
Click to expand...
Click to collapse
I think you will never going to find source codes.I also do not have them.We have currently kernel source codes only which is also not
authentic,they are from other Mediatek devices.None of them are full.If you wanna check then follow this link-HERE
digyvijaykumar123 said:
None of them are full.If you wanna check then follow this link
Click to expand...
Click to collapse
I can suggest source kernel of Fly IQ450 Quattro, complete analog MMX C2 + A110Q
Google-Drive
Maybe there is something that no other source ...
BOPOH'Ok said:
I can suggest source kernel of Fly IQ450 Quattro, complete analog MMX C2 + A110Q
Google-Drive
Maybe there is something that no other source ...
Click to expand...
Click to collapse
Yes those kernel sources from fly are full but here we were talking about full source code.That is framework,ril etc.
Thank you for response.
We cannot get full source code until MediaTek will open source them. However, I heard that they are under extreme pressure from the android community to make the sources open.
Auto brightness fix
It will work for all kitkat based roms & I have tested it personally
Here is the patch
This patch is made by Manish123 http://d-h.st/NVO
Sent from my Micromax A110Q using Tapatalk
Awesome work
Sent from my Micromax A110 using Tapatalk
This is crDroid for Sony Xperia M2 (Eagle D2303)
crDroid build will always mainly based on CyanogenMod with some extra and few features (Cool and useful)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
IMPORTANT: Make sure you have an unlock Bootloader
Code:
WORKING
- CM Repositories
BUGS
- Same from CM
Code:
CREDITS
CM Rom
Slim Rom
Omni Rom
Many More.....
XDA:DevDB Information
crDroid Android, ROM for the Sony Xperia M2
Contributors
davidteri91
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2015-06-22
Last Updated 2015-06-22
Enjoy to Our Site on Google Plus
Download
Help us with Translations
Donate to Maintain our build server
Demo Video
Download Gapps For Lollipop
No News
Thank you! (Grazie Davide!!)
I guess it also have the GPIO issue
NoobZik said:
I guess it also have the GPIO issue
Click to expand...
Click to collapse
Well bug list is the same as CM
Sent from my D2303 using XDA Free mobile app
Dual sim support is added or not?
is this work for d2302
camera working or not???
sai teja badri said:
is this work for d2302
camera working or not???
Click to expand...
Click to collapse
Camera does not work in CM and since bugs are the same as in CM... You can guess
Work it on D2403? And what are the same isses?
Sent from my D2403 using XDA Free mobile app
Where from
Which rom stock from ? 4.4.4 or 4.4.2 .
And what use recovery
This rom is not Rom Stock based. It is build from AOSP and CM sources. And it's Lollipop 5.1.1 not kitkat as mentioned to the Thread subject
It have to be flashed through CM Recovery (A permanent recovery)
NoobZik said:
This rom is not Rom Stock based. It is build from AOSP and CM sources. And it's Lollipop 5.1.1 not kitkat as mentioned to the Thread subject
It have to be flashed through CM Recovery (A permanent recovery)
Click to expand...
Click to collapse
Sorry about my English.
Rom which it has to be installed and then install this rom ?
And what it has several recovery recover for this unit.
---------- Post added at 09:34 AM ---------- Previous post was at 09:12 AM ----------
wesleylpdf said:
Sorry about my English.
Rom which it has to be installed and then install this rom ?
And what it has several recovery recover for this unit.
Click to expand...
Click to collapse
I tried the stock rom 4.4.4 and 4.4.2 .
And recovery philz Recovery Touch, CWM Doomlord , KK 4.4.2 kernel with CWM ... All in vain .
Clean and did the form and factory reset .
I install ommini roms , Z4 Experience, successfully crystalpa . But the ROM Crdroid was unsuccessful.
Where is the error to install Crdroid ? I want to test this rom ..
Those recovery that you have mentioned will not work !
There is no specific rom required to install cr and CM12.
Please read those following thread
http://forum.xda-developers.com/xperia-m2/general/bootloader-devices-real-recovery-t3096833
http://forum.xda-developers.com/showpost.php?p=60491376&postcount=837
does work on d2302???
The bug list is the same as CM12.1 so this rom only works for D2303
Can I try on D2305 single SIM?
New build available (D2303)
Inviato dal mio Xperia Z3 utilizzando Tapatalk
davidteri91 said:
New build available (D2303)
the first one didnt work for me, let's see this one (will leave another comment in 20-30mins)...is the reason that different versions of 2303 exist? FXP's CM12.1 doesnt work, too?
nope...the same
after flashing, the screen stays black (doesnt even show a logo) although the phone keeps warm as if it works something...
first try was after stock 4.4.4 & TWRP...nothing
then I flashed TA from Sony Emma, flashed CM recovery, flashed your ROM from CM recovery and nothing again
Click to expand...
Click to collapse
quake73 said:
davidteri91 said:
New build available (D2303)
the first one didnt work for me, let's see this one (will leave another comment in 20-30mins)...is the reason that different versions of 2303 exist? FXP's CM12.1 doesnt work, too?
nope...the same
after flashing, the screen stays black (doesnt even show a logo) although the phone keeps warm as if it works something...
first try was after stock 4.4.4 & TWRP...nothing
then I flashed TA from Sony Emma, flashed CM recovery, flashed your ROM from CM recovery and nothing again
Click to expand...
Click to collapse
Same problem here!! D2306
Click to expand...
Click to collapse
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi. I build the AOSPAL for Xiaomi Mi4(LTE)
This version is UNOFFICIAL,but It's stable on my test.
About change log, I only write what I add or delete .the rest is same as PA's official release.
Installation instructions
Code:
1. Make a Nandoid Backup before all !
2. Be rooted
3. Have a custom recovery installed
4. Have flashed the Extended Partition Zip
5. Download the ROM
6. Download gapps (recommended: TK GApps ones)
7. Reboot into recovery and perform a full wipe (for the first installation. Dirty flash should work for updates)
8. Flash the ROM
9. Flash the gapps
11. Reboot and enjoy ! The first boot is longer than the others
Changelog
Code:
Add LockClock widget from CM
Add Supersu (thanks AICP)
Add LTE option for Mi4 LTE
Remove ParanoidAndroidOTA ( UNOFFICIAL doesn't need this)
Translate some strings to Chinese :cyclops:
Sync with PA's update
XDA:DevDB Information
ParanoidAndroid, ROM for the Xiaomi Mi 4
Contributors
P013onEr
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-07-23
Created 2015-07-23
Last Updated 2015-07-23
Sources:
https://github.com/P013onEr
Download link:
ROM : https://www.androidfilehost.com/?w=files&flid=35765 (last uploaded one recommended)
GApps : http://forum.xda-developers.com/android/software/tk-gapps-t3116347
Thanks to:
Bitti09 and BaNks for providing their device and vendor trees
audahadi and TeamHorizon for the Kernel
SynnyG (Official cancro Maintainer)
CM
AICP
I dont if I should ask here, but do I need to re-partition the stock partitions as its needed for CM12? Thanks for your work.
please, upload some screenshots for this ROM.
Does this ROM have sweep2wake function in kernel ?
How about battery consumption ?
Thanks!
Let's try it shall we
any experience with this? Anyone like to share?
Unfortunately Setting has stop
Error show up, when clicked on battery icon in notification and in setting in battery option.
Every thing else is working fine.Just the first day of use,
Any fix for this the error and thank you for the rom
Excuse me for the question that may seem a bit absurd, but is there any problem in using this blunt in a 3G terminal?
In this rom work ir blaster of mi4, and FM?
just wanted to ask for below three things if it works i wonna try this out
plz let me know
IR blaster
camera
FM
http://www.androidauthority.com/paranoid-android-calling-it-quits-648429/
Paranoid Android is dead, probably not worth trying anymore.
Hi! this ROM dont will have more updates ???
murcianista said:
Hi! this ROM dont will have more updates ???
Click to expand...
Click to collapse
Would you mind reading the post above you??
diongdyh said:
Would you mind reading the post above you?
Click to expand...
Click to collapse
oh!! thanks! sorry!
whats a pity !
After first boot,the data works but when I switch it off once and then switch on,it doesnt work neither in 2G nor 3G mode even after rebooting multiple times.Had to reinstall rom but same thing happens again.Whats wrong?
Here Maps Offline Working ?
Can someone check if Here Maps Offline is working and the GPS is locking properly ? It would be very helpful
Wiko Rainbow,MyPhone Agua Rio,MicromaxA120 C2C,Explay Fresh ,QMobile i9,BLU Studio 5.0CHD
SAMSUNG GALAXY NOTE 5
DO NOT USE MY WORK WITHOUT MY PERMISSION, FROM NOW ON I WILL REPORT ALL LINKS AND PORTS THAT YOU USE WITHOUT MY PERMISSION OR WITHOUT A LINK TO MY YOUTUBE VIDEO AND MY CREDITS.
Code:
*** Disclaimer
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research and read my tutorials and instructions carefully.
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, i will ignore it.
*/.
Screenshots:
Features
better ram management with 400+ free ram
camera working 100%
rebased to v13 kitkat wiko firmware
great camera and video quality
rooted
multilanguage
battery backup awsome
Known bugs:
proximity sensor.
INSTRUCTION TO INSTALL NOTE5 ROM:
1. You must be on wiko base.
2. Boot into recovery and wipe/system, wipe/data. If you're on Philz recovery, choose clean to install a new ROM. wipe cache/ wipe dalvik cache
3. Now select Install zip and browse to the location where you have galaxynote5_WR.zip and install it.
4.reboot
DOWNLOADS:
GALAXY NOTE 5 ROM
Click to expand...
Click to collapse
GPL:
The kernel included in this ROM is WR KERNEL 1.2 by @moonrotation, here:http://forum.xda-developers.com/android/general/kernel-wr-kernel-wiko-rainbow-clones-t3003920I have not altered anything.
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: STABLE
Stable Release Date: 2015-10-16
Created 2015-10-16
Last Updated2015-10-16
Click to expand...
Click to collapse
F.A.Q
a)i dont know what is WIKO BASE..can you explain?
-see my tutorial and videos explaining in 5 minutes here:http://forum.xda-developers.com/android/general/tutorial-t3070293
b)i have GPS problems,how i fix it?
-see my easy solution here:http://smokermanxda.blogspot.pt/2015/05/gps-fix-for-kitkat-roms-wiko-rainbow.html
c)can i flash WR kernel MIUI by moonrotation?
-yes
d)i have MyPhone Agua Rio,MicromaxA120 C2C,Explay Fresh ,QMobile i9,BLU Studio 5.0CHD can i flash this rom?
-yes, you can , but first you need wiko rainbow firmware kitkat, flash it with SP FLASHTOOLS , see here :http://forum.xda-developers.com/android/general/tutorial-t3070293
e) i ve lost my IMEI, now what?
-easy, see here how to restore it:http://smokermanxda.blogspot.pt/2015/05/fix-imei-wiko-rainbow-micromax-a120.html
f) i dont have camera working, now what?
-flash kernel v13 first and then make all wipes and flash this rom
Click to expand...
Click to collapse
CREDITS: smokermanXDA,sepneela for original rom ported from here:http://en.miui.com/thread-110436-1-1.html
.
OP
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Devices Confirmed working:
SCL-L01
SCL-L02
SCL-L03
Features:
Based on CyanogenMod 13.0 - Android 6.0.1 Marshmallow
Custom ROM developed for Qualcomm Snapdragon 210 (msm8909) processor.
First Android Marshmallow ROM released for Huawei Y6.
Rom Download: XDA DevDB
Installation:
Ensure you have unlocked bootloader (there are many guides on how to check this) if you need a code go here, Emui Download Page click unlock bootloader and login with either facebook or phone account to obtain your code.
Install working TWRP recovery from: XDA DevDB
Download ROM from above link.
Download Open Gapps from http://opengapps.org/, select arm, 6.0 and then your preferred package (I use the aroma installer because it includes needed webview, see issues)
Boot into TWRP, perform backup (always backup!!!), wipe data/factory reset, flash ROM zip and reboot.
First boot may take quite a while.
Dual Sim users:
Grap dualsimfix and flash it after installing the rom, but before installing gapps.
Known issues:
Camera is not working
Sources available on GitHub:
Device Files
Vendor Files
Kernel Source
Wifi Driver
Credits to Cyanogenmod for making this possible.
XDA:DevDB Information
Cyanogenmod 13.0 for Huawei Y6, ROM for the Android General
Contributors
Runner85sx, DestructoSphere, giorgio130
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: Initial 2016-11-23
Stable Release Date: 2016-11-23
Created 2016-11-24
Last Updated 2017-09-25
Reserved
reserved
Great, let's try
Welcome back runner85sx
dondo85 said:
Welcome back runner85sx
Click to expand...
Click to collapse
Thanks dondo85.
Thanks for your work guys (runner85sx & DestructoSphere).
Please confirm wich device is working with what. So we can continue our work on that.
Huawei Y6 SCL-L01 works
L01
Another working l01 here. Everything very smooth, yet small bugs.
Thanks you!
Dual Sim Fix my SCL-L21 does not work, he installed three times and unfortunately not working.
Yet Another huawei scl-l01 device here; very good rom, runs fast, very fast..,looks great, waiting for camera fix ...good job )
Edit: when i call someone the other person does not heard me, and i dont heard her
Raduz71 said:
Dual Sim Fix my SCL-L21 does not work, he installed three times and unfortunately not working.
Click to expand...
Click to collapse
Model scl-u23 dual sim doesnt work...
Dual sim fix doesn't work on my stl-tl00h, still no singal(it says no sim)
I am glad that the problem is not just on my smartphone. Anyway, great job and I look forward to bug fixes.
Hi tnx for created this ROM
But camera and simcard not working
Scl u31 is my device
If the camera is fixed this is almost daily driver ready. Keep up the good work man
Can someone please test if this zip fixes autorotation after sleep issue?
Go to recovery, flash it, reboot, check rotation, lock phone while unplugged, wait at least 10 seconds, unlock, check rotation. Thanks guys.
Btw I will not respond to private messages regarding bugs that is what this thread is for.
Scl-u23 Signal not working ... Can fix? Pls
Probare
zoztik said:
Scl-u23 Signal not working ... Can fix? Pls
Click to expand...
Click to collapse
Ya lo probaré de me tiempo una hora