Database Info

A: Having Problems Rooting the Note Pro 12.2 SM-P900/905? TRY THIS!

**NOTE** For the SM-P900! However steps should be the same for SM-P905 EXCLUDING THE FILE TYPES (THEY ARE DIFFERENT DO NOT ATTEMPT TO USE THE FILES FOR THE SM-P900 OR BYE BYE TO YOUR NOTE 12.2 Pro because now you have a problem that may or may not be repairable/reversible). You just have to make sure you have the coordinating files for the process!
If anyone else has issues try this and these steps to complete the Root/Custom ROM/TWRP Recovery installations successfully for a "First time go":
1. Remove Kies and Kies3 files, related files, folders, and everything that has anything to do with the primary installation of either the two programs on your PC and your devices. When/if prompted, select the checkable box and elect not save any type of files... if you want to keep them save them OFF your main PC on a flash or removable storage device.
2. REMOVE ALL SAMSUNG DRIVERS AND REPLACE WITH ONLY OFFICIAL SAMSUNG DRIVES!!! THIS IS A BIG MUST!
3. Using your USB 2.0 cable and ports Install the Custom Rom "P900XXUANB3-RecoveryImg.tar" FIRST and flash it via ODIN 3.07 under the PDA checkbox that is "fixed" (so you noobs don’t make any soft bricks if this is your first attempt at rooting), and only use the ODIN 3.07 THAT COMES W/ CHAINFIRES AUTO ROOT .zip file and then unzip the folder to open ODIN 3.07 ONLY! This is only because I have read that there have been issues installing the SU via Chain Fires Auto Root Process... the file is called (currently as of 25 JUNE 2014) "P900XXUANB3-RecoveryImg.tar" PDA select it and then start when in DOWNLOAD MODE on your device. Manually select DOWNLOAD MODE if you have to BEFORE PRESSING START! Otherwise, one is just going to sit there and not accomplish anything.
http://forum.xda-developers.com/attachment.php?attachmentid=2591013&d=1392923580
http://forum.xda-developers.com/attachment.php?attachmentid=2591159&d=1392930654
http://forum.xda-developers.com/attachment.php?attachmentid=2775098&d=1401644348
4 Reboot back into DOWNLOAD MODE. Flash in ODIN 3.07 with the PDA section and select this file next to install: "openrecovery-twrp-2.7.1.0-v1awifi.img.tar"
5. In DOWNLOAD MODE and flash the file under the PDA box TWRP (OR CURRENT RECOVERY OF YOUR CHOICE THAT IS AVAILABLE)
6. AGAIN... Restart your device into DOWNLOAD MODE via ODIN 3.07 and select PDA and then finally root this: "CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5" Then you can backup, restore, flash anything, and be happy! YOU SHOULD FINALLY HAVE A SUCCESSFUL ROOT! Turn off and REBOOT into RECOVERY to see if TWRP stuck and then reboot to see if the SU stuck. IF everything stuck reboot back into TWRP to flash whatever rom is available MAKE SURE TO BACK UP EVERY FILE BEFORE YOU FLASH ANY NON-STOCK ROMS. If not successful rinse wash and repeat until it does!
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
7. That’s it you should have root and a custom rom and recovery if you followed these instructions for flashing via ODIN 3.07 and Chainfires AutoRoot files. If you still have an issue repeat until root/recovery/Rom sticks. If you have to update the Binary for the SU just go to the Google Play Store and install the app and then try it again till it works. GOOD LUCK it worked for me this way!
**IMPORTANT**
BACK UP BACK UP BACK UP BACK UP after every flash that is possible to back up. If you can, back up the NON-SU stock ROM BEFORE installing SU, after installing the recovery and/or back up.
***IF I HELPED YOU OUT THANK ME***
DISCLAIMER - all research was observed via comments on the thread according to issues people have been having during ROOTING the device I simply have compiled the data and made a check list!

Need a link to the files you mentioned.

Thanks. Very helpful.
I have a P900. Is there a way to unroot and bring a unit back to stock? My main concern is if Samsung sends out a software/firmware update, and a device is already rooted, can the update be applied?

sstea said:
Thanks. Very helpful.
I have a P900. Is there a way to unroot and bring a unit back to stock? My main concern is if Samsung sends out a software/firmware update, and a device is already rooted, can the update be applied?
Click to expand...
Click to collapse
Read THIS
But still one quiestion, why the heck you root your device if you are going to update it via Samsung's official ways. Ah and one more question.. why the heck would you want to update your device if it's rooted?
A new update from Samsung can patch all known security holes and make your device unrootable, and since you are rooted now, one would think that you don't want to loose it. Or where do I know if you rooted because it sounded nice and cool, without knowing what you did and most importantly WHY you did.

Spere said:
Read THIS
But still one quiestion, why the heck you root your device if you are going to update it via Samsung's official ways. Ah and one more question.. why the heck would you want to update your device if it's rooted?
A new update from Samsung can patch all known security holes and make your device unrootable, and since you are rooted now, one would think that you don't want to loose it. Or where do I know if you rooted because it sounded nice and cool, without knowing what you did and most importantly WHY you did.
Click to expand...
Click to collapse
Thanks. I appreciate the reply. I have rooted many devices before. I have to admit that it was more of following posted instructions and not fully understanding the details. What gives me pause is how extremely limited the support is for this tablet. I want to root my note if I can make it more responsive, get rid of bloatware, enable more apps for multi-window, titanium backup, etc. I want to make sure that if I root that I don't get stuck with on an old release. So will previously rooted Notes be able to get the necessary files to easily update and maintain root, or does rooting now mean that a tablet may be stuck at the current release? Thanks

sstea said:
Thanks. I appreciate the reply. I have rooted many devices before. I have to admit that it was more of following posted instructions and not fully understanding the details. What gives me pause is how extremely limited the support is for this tablet. I want to root my note if I can make it more responsive, get rid of bloatware, enable more apps for multi-window, titanium backup, etc. I want to make sure that if I root that I don't get stuck with on an old release. So will previously rooted Notes be able to get the necessary files to easily update and maintain root, or does rooting now mean that a tablet may be stuck at the current release? Thanks
Click to expand...
Click to collapse
You can always flash stock firmware via odin

I was just wondering if everyone was having a much easier time with achieving root now? Kies caused me to "Hang" a lot during the Root and custom rom to stick w root... as of right now i can not get the only ONE custom ROM that looks promising, i have found by GWatts (correct me if i am wrong and i apologize if i have typed the wrong screen name handle) i believe his handle is... at this point im not sure what i am doing wrong as of yet but im sure i am missing a step or i just need to start back at unroot back to stock firmware and try and try again lol. not saying anything is wrong with his work at all by any means because people other than me with the same device have gotten it to stick and im just wishing i could as well because its sweet looking ROM! NOT TO MENTION THE ONLY ONE THAT IS OUT (that is which i know about. i haven't been on in a few months idk), SO KUDOS TO WATTS i just haven't been successful at installing his custom rom just yet... Im hoping that its just going to need to be erased again and then reformatted after a factory reset and what not, i pray it sticks because his incorporation of the aroma installer was a nice touch and his ROM really looks good... Now if i can just get it not to stick at samsung boot logo and freeze id be good lol!

sanvara said:
Need a link to the files you mentioned.
Click to expand...
Click to collapse
ok

I followed your instructions but while flashing the cf-auto-root file my screen got all distorted (speckled grains of color), and nothing else happened for about 15 minutes, until I just unplugged it and shut it off.
Now when I power it on it gives me the error "Firmware upgrade uncountered an issue. Please select recovery mode in Kies & try again."
I wonder what I did wrong.

pnuker said:
I followed your instructions but while flashing the cf-auto-root file my screen got all distorted (speckled grains of color), and nothing else happened for about 15 minutes, until I just unplugged it and shut it off.
Now when I power it on it gives me the error "Firmware upgrade uncountered an issue. Please select recovery mode in Kies & try again."
I wonder what I did wrong.
Click to expand...
Click to collapse
**Edit**
I went back and reflashed the twrp file and it got me out of the error screen. I installed supersu, and then re-flashed the cf-auto-root file, and it worked like a charm. I'm not sure if it was the installation of supersu, or just repeating the process that fixed it, but I'm happy either way...

Thank you! I succesfully rooted my SM-P900 after all mentioned problems ( hanging in the cache.img and after a while a disturbed screen etc.) with your guide. I am a very happy rooter now.

Thanks,
Thanks to the poster. I tried rooting with the instructions from a few other sites and thought I bricked it,
Followed your instructions, and presto.. Rooted! :good:

Rooted!
Thanks for your post. This is my first time ever rooting a device. Your method worked perfectly!

your welcome!
frankiecxyz said:
Thanks for your post. This is my first time ever rooting a device. Your method worked perfectly!
Click to expand...
Click to collapse
your very welcome! it took me a bit to get it down but i eventually figured it out and at the time information on rooting the device was hard to find with this specific model. then i discovered what the issues where and felt the need to post it! im glad i could help!:laugh:

Flash SU with TWRP not ODIN
Here's my story...
Received my new UK spec SM-P900 Note Pro 12.2, ran through the initial setup, performed two OTA upgrades to KOT49H.P900XXUANI1, then attempted to flash SU using Odin 3.07 using the various instructions on this forum. Result: failed cache flash and soft brick!
Used Keis 3 to recover the tablet which took two hours! After more reading I discovered the quick boot recovery flash method, so re-attempted on a different PC, with exactly the same result. Re-flashed the boot, tried again, fail, again, fail, etc, etc. Various permutations of PCs, Odin versions and USB ports were tried.
Concluded that the Odin method was NEVER going to work, so had a rethink. Used Odin to flash TWRP v2.8. Downloaded the latest SU-BETA v2.7 flash for TWRP (not Odin), copied it to the root of the tablet SD and then flashed it with TWRP. Worked first time with no messing about!!!
Booted, ran SU and upgraded to Premium, disabled KNOX from within SU. Tablet locked up. Booted, re-ran SU, disabled KNOX again, this time successfully. Ran Titanium, filtered with KNOX and froze all occurrences, then de-installed KNOX completely. :good:
Lesson learnt... DO NOT use Odin to flash SU on a P900 !

soft bricked
Hello!
First of all let me say that I'm a complete newbie, this is my first android device. I tried to root my SM-P900 (P900XXUANI1) using an online guide (image with URL attached, as I am not allowed to paste URLs)
Unfortunately at Step 10 (flashing with Odin) the operation failed and now I ended up with a soft bricked device (I assume this is the correct definition). It will only show the message asking me to connect it to KIES to recover it.
I know i can try to use KIES 3 and restore it, but before that i would like to ask if there is any alternative which will allow me to unbrick the device without losing all my data... (yeah i know...).
If i follow this guide will this help? I'm not sure if I can even put the device in download mode again as it shows the error message about connecting it to KIES...
At this point I don't care about rooting, I just want to unbrick the device.... I understand the guide up to (and including) step 3. But for the rest of the steps I'm lost Could anyone please explain them in a bit more detail? I don't want to install any custom firmware, just to unbrick it...
Any help would be very appreciated!
Thank you

Yemble said:
Here's my story...
Received my new UK spec SM-P900 Note Pro 12.2, ran through the initial setup, performed two OTA upgrades to KOT49H.P900XXUANI1, then attempted to flash SU using Odin 3.07 using the various instructions on this forum. Result: failed cache flash and soft brick!
Used Keis 3 to recover the tablet which took two hours! After more reading I discovered the quick boot recovery flash method, so re-attempted on a different PC, with exactly the same result. Re-flashed the boot, tried again, fail, again, fail, etc, etc. Various permutations of PCs, Odin versions and USB ports were tried.
Concluded that the Odin method was NEVER going to work, so had a rethink. Used Odin to flash TWRP v2.8. Downloaded the latest SU-BETA v2.7 flash for TWRP (not Odin), copied it to the root of the tablet SD and then flashed it with TWRP. Worked first time with no messing about!!!
Booted, ran SU and upgraded to Premium, disabled KNOX from within SU. Tablet locked up. Booted, re-ran SU, disabled KNOX again, this time successfully. Ran Titanium, filtered with KNOX and froze all occurrences, then de-installed KNOX completely. :good:
Lesson learnt... DO NOT use Odin to flash SU on a P900 !
Click to expand...
Click to collapse
Have you got a link to the odin rwrp 2.7 you used and the su 2.7 flash for twrp please?

VenomousViper said:
**NOTE** For the SM-P900! However steps should be the same for SM-P905 EXCLUDING THE FILE TYPES (THEY ARE DIFFERENT DO NOT ATTEMPT TO USE THE FILES FOR THE SM-P900 OR BYE BYE TO YOUR NOTE 12.2 Pro because now you have a problem that may or may not be repairable/reversible). You just have to make sure you have the coordinating files for the process!
If anyone else has issues try this and these steps to complete the Root/Custom ROM/TWRP Recovery installations successfully for a "First time go":
1. Remove Kies and Kies3 files, related files, folders, and everything that has anything to do with the primary installation of either the two programs on your PC and your devices. When/if prompted, select the checkable box and elect not save any type of files... if you want to keep them save them OFF your main PC on a flash or removable storage device.
2. REMOVE ALL SAMSUNG DRIVERS AND REPLACE WITH ONLY OFFICIAL SAMSUNG DRIVES!!! THIS IS A BIG MUST!.......
Click to expand...
Click to collapse
When i trying root, my SGN freeze in "cache". Odin show error and tablet goes to Emergency Firmware Recovery. Аnd it does not matter what program I use and how I do it.

Mine Reboots Constantly
I rooted my SM-900 about two weeks ago.
It worked great for a week until the device started rebooting by itself.
The first time a couple times a day, now it does it whenever as often as twice in 5 minutes.
Is there a way to see which app is causing this or does anyone know why this might be happening?
Though I rooted I haven't been poking around. I figured it'd be like using Linux but now I see it's not quite like that.
Thanks in advance.

sunnykhs said:
I rooted my SM-900 about two weeks ago.
It worked great for a week until the device started rebooting by itself.
The first time a couple times a day, now it does it whenever as often as twice in 5 minutes.
Is there a way to see which app is causing this or does anyone know why this might be happening?
Though I rooted I haven't been poking around. I figured it'd be like using Linux but now I see it's not quite like that.
Thanks in advance.
Click to expand...
Click to collapse
Have you cleared dalvic cache and cache in TWRP recovery? Be forewarned the process takes a while for cache wipe.
Sent from my SM-P900 using Tapatalk

[Q]Soft Brick..Stock ROM..ODIN

Hello everyone.
First of all, the questions I have :
Where can I find Galaxy Tab 2 P3100 stock rom file for ODIN?
Which recovery should be used with it?
Boxes I should tick when installing it?
Problem I'm facing :
Tab kept booting over and over and it shows start screen, so I decided to install a custom ROM.
check SlimROM forums and downloaded the 6.0.5.1 recovery and the Slim-p3100-4.4.4.build.9.1-UNOFFICIAL-20150205-2140 ROM
Flashed Recovery via ODIN, then when I tried Wipe Data/Factory Reset, tab just kept restarting as if I never tried Wiping anything.
Read all of the posts on : http://forum.xda-developers.com/galaxy-tab-2/help/soft-bricked-tab-gt-p3100-t3016879
Conclusion : Before I decide whether the device is bai-bai, I should flash a Stock ROM with Pit files and re-parti (I think)
Problem : Can't find the Stock ROM file and Pit file for days now..only ones I found are outdated and links dead.
(some info on which boxes to check in ODIN and ODIN version would be helpful too, noob over here)
Tab used to run ICS.
Please help!
Thanks in advance!

Have you checked sammobile?

Only place to find it will be Samobile, tab has no active development and is ancient with "end of life " issues.
Go to Samobile find firmware, click download, go fishing and come home 12 hrs later and maybe it will be downloaded completely.
If you're lucky flash with Odin and if it works leave it alone.
Pp.

Nothing worked
shsagnik said:
Have you checked sammobile?
Click to expand...
Click to collapse
PanchoPlanet said:
Only place to find it will be Samobile, tab has no active development and is ancient with "end of life " issues.
Go to Samobile find firmware, click download, go fishing and come home 12 hrs later and maybe it will be downloaded completely.
If you're lucky flash with Odin and if it works leave it alone.
Pp.
Click to expand...
Click to collapse
So I found the PIT file and the stock ROM tar file (Thanks for the tip by the way) and it still didn't work.
It's as if I hadn't done a thing in the first place!!
Stock ROM same as it is, nothing changed AT ALL..all that happened after is that Custom Recovery was removed.
So I entered Normal Recovery and Factory Reset, on doing so, it reset the Stock ROM. I rooted the tab this time and still haven't done anything else.
Tab started rebooting on its own again and soon wont stop rebooting.
All I found on the forums was that the only solution is the Stock Tar + PIT file, but that didn't have any effect at all..
Anyone could tell me how to proceed to install a custom ROM just to get rid of this faulty damn Stock one?
Thanks in advance!
Your help is really appreciated!!

Maybe you need tar.md5 file of a custom rom

Your best bet is to read through this thread http://forum.xda-developers.com/showthread.php?t=3016879 you may find something to guide you.
Pp.

I was able to rescue mine with heimdall and the heimdall frontend.

Samsung S6 SM-G920F - Hard Bricked need help.

Hi everyone, I hope that you can help me. My phone was rooted for quite a long time but since it was rooted it wouldn't allow me to access my banking app or PayPal or other apps that I needed to, so around a week ago I decided to unroot it with a simple unroot button in the SuperSU.
However this did not end well and when my phone was rebooting it got stuck in the boot loop and it would not load again, I tried wiping the cache which didn't help. I then wiped the phone completely and that did not help with anything.
So then I read about it and I decided to try using Odin to flash the phone with the stock firmware, and whichever firmware I used the Odin would fail and give me a "Nand write start fail". I tried for hours and day and could not get this to work.
So then I decided I would try contacting Samsung and see if they could fix it for me, they took the phone but today I got an email saying that the can't repair it because the KNOX was tripped and the warranty is voided.
So right now I don't really know what to do, do I buy a new phone?

You can do JTAG maybe

darkliesbehind said:
Hi everyone, I hope that you can help me. My phone was rooted for quite a long time but since it was rooted it wouldn't allow me to access my banking app or PayPal or other apps that I needed to, so around a week ago I decided to unroot it with a simple unroot button in the SuperSU.
However this did not end well and when my phone was rebooting it got stuck in the boot loop and it would not load again, I tried wiping the cache which didn't help. I then wiped the phone completely and that did not help with anything.
So then I read about it and I decided to try using Odin to flash the phone with the stock firmware, and whichever firmware I used the Odin would fail and give me a "Nand write start fail". I tried for hours and day and could not get this to work.
So then I decided I would try contacting Samsung and see if they could fix it for me, they took the phone but today I got an email saying that the can't repair it because the KNOX was tripped and the warranty is voided.
So right now I don't really know what to do, do I buy a new phone?
Click to expand...
Click to collapse
Tried flashing bootloader and stock recovery? Smart Switch emergency initialization?
And a bit more details would help, like model, CSC, Android version, can you enter recovery, is it stock or custom, is there any DRK error in recovery, which firmware you tried to flash, which kernel you used for rooting, whatever you think it could be useful.

brenner650 said:
Tried flashing bootloader and stock recovery? Smart Switch emergency initialization?
And a bit more details would help, like model, CSC, Android version, can you enter recovery, is it stock or custom, is there any DRK error in recovery, which firmware you tried to flash, which kernel you used for rooting, whatever you think it could be useful.
Click to expand...
Click to collapse
I will provide more details when I receive the phone back from samsung. But from what I can remember. I am able to go into recovery mode, it was running stock ROM, I tried to flash both Vodafone firmware which is what I bought the phone with and I also tried UK base firmware. its the SM - G920F model. It was running the newest android, I don't remember what version it was but the update wasn't too long ago .

with Smart Switch emergency initialization, you can make that your phone works, it's long but it works. i do it.
look at (it's in french but you can do it)
https://www.youtube.com/watch?v=mi7O0OvnS2E

Okay, so I've tried using the Smart Switch initialization and this did not work, it says that my device was not supported for initialization.

darkliesbehind said:
Okay, so I've tried using the Smart Switch initialization and this did not work, it says that my device was not supported for initialization.
Click to expand...
Click to collapse
what model are you using?...download the latest MM rom with the PIT file ....flash the PIT file with odin to repartition the phone and flash the stock rom....it should work

PLEASE HELP ME!!! Sm_n915P wont load firmware.

Long story short. I have downloaded about 10 different firmwares and they will not load onto Sm-N915P (Sprint Note4) I attempted to root last year and failed and I just left it alone. I came back to it now and while doing a factory reset via Twrp I wiped OS. I dont remember what firmware I had on the phone as their was no backup done. ( I know, I know now i understand why you must always do a back up). I am trying to at least get any type of firmware reloaded onto the phone. I even have a membership at sammobile now trying firmwares. I would prefer to not just keep downloading firmwares and trying them. If someone has a idea how I can get my phone back up and running.
Im not sure what information to add to this post. I do have Twrp twrp-3.0.2-0-trltespr.img running on phone. but everytime I try to load Firmware I get the MD5 error (I removed the MD5 tag and still get fail.
When I attempt to start phone i get Kernel is not seandroid enforcing (Red)
Set Warranty bit Kernel (Yellow)

Try flashing The latest Twrp from:
https://dl.twrp.me/tblte/
And Custom rom From:
https://forum.xda-developers.com/no...ent/romkernel-galaxy-notedge-1-0beta-t3393124

steavex said:
Try flashing The latest Twrp from:
https://dl.twrp.me/tblte/
And Custom rom From:
https://forum.xda-developers.com/no...ent/romkernel-galaxy-notedge-1-0beta-t3393124
Click to expand...
Click to collapse
Thank you for your reply. I am downloading now and will let you know how it turns out. I really appreciate your reply. I was beginning to think no one would respond and I would have to just trash it and move on.

Thanks for your help
Well Great news! It flashed to the phone no problem. However after it went to a blue screen that said starting Anroid twice. It is now in a boot loop. Can anybody assist me with this.

Sorry I've been kinda busy and forgot to check for replys.....you can try flashing custom kernel from the link below
https://androidfilehost.com/?w=files&flid=109669
Download the first file:

Bricked my Samsung Galaxy A8 2018

Here is what I did so far to get here.
First I followed the guide to root my phone, and to be honest, all was perfect. I had to restore stock rom cause my first few tries failed. But seems I flashed a rom for a different provider. It worked anyway, but I don't have my sim card in that phone, it's temporarily in another device.
I had a little issue in settings, where battery was coming up two times in the list. That bugged me, I wanted to restore the rom and see if a full restore would take care of this issue, but somehow, after I installed twrp and rooted my phone, I can no longer flash anything stock with odin, it fails.
If I try to flash the AP tar.md5 file, it fails when it gets to system. And then after rebooting, I see this message:
"An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC Software"
I tried installing smart switch and kies, and both software doesn't detect my device in download mode or twrp (obviously)...
So to get rid of the emergency message, I flashed twrp again with odin, and been successful. If I tried to flash the AP image again, or CSC, it fails. And then I get the message back.
After flashing twrp, I'm stuck in a boot loop. Would need to restore system I think, but cannot seem to be able to do it with Odin.
Any possible way to recover my device?
Update: Turns out I must have made a mistake with the firmware I thought I had flashed, versus the one I was trying to flash and was failing. I downloaded the latest october firmware and it's currently flashing in odin!

This not be posted in development !

mchlbenner said:
This not be posted in development !
Click to expand...
Click to collapse
Sorry about that, I thought it was related to the topic. Obviously, you saw that I do not have a thousand posts around here, a wise thing to do would have been to suggest me where should I have posted this, and how can I move my thread around? Do I wait for a mod to move it himself?

pleclair said:
Here is what I did so far to get here.
First I followed the guide to root my phone, and to be honest, all was perfect. I had to restore stock rom cause my first few tries failed. But seems I flashed a rom for a different provider. It worked anyway, but I don't have my sim card in that phone, it's temporarily in another device.
I had a little issue in settings, where battery was coming up two times in the list. That bugged me, I wanted to restore the rom and see if a full restore would take care of this issue, but somehow, after I installed twrp and rooted my phone, I can no longer flash anything stock with odin, it fails.
If I try to flash the AP tar.md5 file, it fails when it gets to system. And then after rebooting, I see this message:
"An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC Software"
I tried installing smart switch and kies, and both software doesn't detect my device in download mode or twrp (obviously)...
So to get rid of the emergency message, I flashed twrp again with odin, and been successful. If I tried to flash the AP image again, or CSC, it fails. And then I get the message back.
After flashing twrp, I'm stuck in a boot loop. Would need to restore system I think, but cannot seem to be able to do it with Odin.
Any possible way to recover my device?
Click to expand...
Click to collapse
You forgot to flash all of them
BL, AP, CP, CSC

pleclair said:
Sorry about that, I thought it was related to the topic. Obviously, you saw that I do not have a thousand posts around here, a wise thing to do would have been to suggest me where should I have posted this, and how can I move my thread around? Do I wait for a mod to move it himself?
Click to expand...
Click to collapse
Just because you have a lot of post you don't post question in development section.

587.saboor said:
You forgot to flash all of them
BL, AP, CP, CSC
Click to expand...
Click to collapse
I did flashed all of them. But it always fails. No matter if I select only BL, AP, CP, CSC... or all of them. Almost seems like twrp is preventing write or something else does.
It fails after a few seconds in the process. Is there any kind of log generated by odin? If so, where can I find it? I don't see much information beside that it fails.

OEM unlock checked in dev options?
USB debuging checked? these were always the go to mischecks...
back when I had the galaxy a5 2017 520W canada unit I flashed a european rom to see if FM radio was going to work. it Worked, but I had the simular issue with battery showing up twice AND I ended up tripping knox while doing it. phone seemed to work fine other then that issue and the radio worked as well.
Flashed it back to 520W stock... later sold the phone... no issues. perhaps it was different with nougat

supertac said:
OEM unlock checked in dev options?
USB debuging checked? these were always the go to mischecks...
back when I had the galaxy a5 2017 520W canada unit I flashed a european rom to see if FM radio was going to work. it Worked, but I had the simular issue with battery showing up twice AND I ended up tripping knox while doing it. phone seemed to work fine other then that issue and the radio worked as well.
Flashed it back to 520W stock... later sold the phone... no issues. perhaps it was different with nougat
Click to expand...
Click to collapse
Yeah, I have those two checked. For some reasons, I was tired that night, and was actually trying to flash 7.1.1 firmware, while having already upgraded to 8.0. So I believe this operation wasn't getting thru because of that. I was tired, and picked the wrong folder, and flashed 7.1.1. Well, I was trying to flash, but it kept failing, but had a tiny bit done, enough to screw this up like this.
When I picked the right folder, 8.0, then it worked.
As for tripping knox, you probably tripped it while flashing twrp. I believe it trips it, haven't heard of a way to do it.

pleclair said:
Yeah, I have those two checked. For some reasons, I was tired that night, and was actually trying to flash 7.1.1 firmware, while having already upgraded to 8.0. So I believe this operation wasn't getting thru because of that. I was tired, and picked the wrong folder, and flashed 7.1.1. Well, I was trying to flash, but it kept failing, but had a tiny bit done, enough to screw this up like this.
When I picked the right folder, 8.0, then it worked.
As for tripping knox, you probably tripped it while flashing twrp. I believe it trips it, haven't heard of a way to do it.
Click to expand...
Click to collapse
nope. NEVER flashed twrp once on the A5- the european firmware tripped it on the 520W