official samsung clear protective rainbow smudges - Galaxy S6 Accessories

Hi, I bought this case for my gold s6
http://www.amazon.com/gp/product/B00UCZGXW2?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
I love it but the back of the case has weird rainbow effect smudges on the inside where the clear plastic meets the glass. Any remedies for this? Thank you

bigjoe87865 said:
Hi, I bought this case for my gold s6
http://www.amazon.com/gp/product/B00UCZGXW2?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
I love it but the back of the case has weird rainbow effect smudges on the inside where the clear plastic meets the glass. Any remedies for this? Thank you
Click to expand...
Click to collapse
That is due to some oil/liquid stuck in between the phone and the case. You can try to clean it off with rubbing alcohol and/or get a back plastic protector.
http://www.amazon.com/Protector-amFilm-Invisible-Replacement-Packaging/dp/B00UH8YNUS/

i will try out the rubbing alcohol, though I don't think it is good for plastics. Also, I am not sure if a back protector would fit, this case is extremely slim and tight fit.

Had similar problem and this will be solved with standard film back protector (better with matt finish) and case still fits.

Related

Tempered Glass for s4 pros and cons over Film protectors?

What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since sgs4 have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
i never bothered because they're so expensive and i screw up the screen anyways so the film type are more easily replaceable
ill probably end up buying 2 or 3 cases and end up using only screen protectors in most situations lol.
to me i rarely drop my phone but i have trouble keeping it out of my pocket with my keys and change, other things. ive been pretty good about it but not perfect.
First off my only problem with tempered glass on my S3 was that it messed with screen responsiveness... Now the ones for the S4 are mostly half the thickness of last years so that should help that problem a lot. The iLoome protector fort the S4 is fully clear and I assume it has adhesive over the entire surface. The sense of mind you get with glass is great. Plus the feel of glass is much better than that of other screen protectors. If you can find one that doesn't take away from screen sensitivity than i'd say it's definitely worth it if you care about your phone.
Sent from my GS3
ichilouch said:
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since sgs4 have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
Click to expand...
Click to collapse
I have a "Flexible Glass Screen Protector" on my S3 that has adhesive all across the back. I have only removed it once in the couple month's that I've had it. I have not encountered any dust getting between the two pieces of glass. The adhesion has not deteriorated any either. I am very happy with it and I really am hoping I will be able to locate one for my S4. The only draw back that I have found is that the thicker protector limits the cases you can use. My favorite cover before I got the protector was the Seidio Surface case and it no longer can be used. I also like my Otterbox Defender case and I was able to "squeeze" it on after I removed the plastic protector that came on the cover. It's a tight fit, but it does work.
KeithSr said:
I have a "Flexible Glass Screen Protector" on my S3 that has adhesive all across the back. I have only removed it once in the couple month's that I've had it. I have not encountered any dust getting between the two pieces of glass. The adhesion has not deteriorated any either. I am very happy with it and I really am hoping I will be able to locate one for my S4. The only draw back that I have found is that the thicker protector limits the cases you can use. My favorite cover before I got the protector was the Seidio Surface case and it no longer can be used. I also like my Otterbox Defender case and I was able to "squeeze" it on after I removed the plastic protector that came on the cover. It's a tight fit, but it does work.
Click to expand...
Click to collapse
What Brand did you use and how thick was it?
ichilouch said:
What Brand did you use and how thick was it?
Click to expand...
Click to collapse
I got it from GlassZone and I believe it is 6mm, I will have to look for my old email confirmation.
KeithSr said:
I got it from GlassZone and I believe it is 6mm, I will have to look for my old email confirmation.
Click to expand...
Click to collapse
It isn't 6mm thick, that would be +70% the thickness of the entire phone! lol
Maybe 0.6mm, that would still be very thick for a screen protector.
Spigen film is the way to go... $14 for two protectors and easy to install...
Just watched a review of the Spigen Glas.tR and it is also CLEAR!
Sent from my GS3
I had a glass protector on my GS3 (XGear Spectre, I think) and it worked fine - no loss of sensitivity. It did allow some tiny dust in, but it was easy to lift and wipe it out the couple of times it happened over 8 months. And the week before my S4 came in, I managed to drop the S3 on its face...the screen protector cracked, and the phone is still perfect. Looking at the Spigen one next week just because of that.
Asmodian3 said:
It isn't 6mm thick, that would be +70% the thickness of the entire phone! lol
Maybe 0.6mm, that would still be very thick for a screen protector.
Click to expand...
Click to collapse
Okay, I found the ad for the flexible glass protector. I ordered it on eBay, this one is very similar even though it is for the Note 2: http://www.ebay.com/itm/Samsung-Gal...193&pid=100040&prg=1011&rk=1&sd=230950051927&
I love this screen protector and am hoping that I will be able to get one for the new S4.
---------- Post added at 12:21 PM ---------- Previous post was at 12:08 PM ----------
I also had the one everyone was talking about at this thread: http://forum.xda-developers.com/showthread.php?t=1920757
But, like someone said previously, it had adhesive only on the outside edges and dust or dirt could get underneath the protector.
I ended up breaking it on the corner when I removed it to clean beneath it.
That does look like a nice one.
I bought the Spigen Slim Glass screen protector and I am 100% satisified. Zero less in screen sensitivity and it feels smooth as, well, glass
bobbydsiu said:
I bought the Spigen Slim Glass screen protector and I am 100% satisified. Zero less in screen sensitivity and it feels smooth as, well, glass
Click to expand...
Click to collapse
That's awesome. Which one did you get? .TR or .T? I didn't like the one for the s3 but apparently this one is better as the adhesive is all over.
thacounty said:
That's awesome. Which one did you get? .TR or .T? I didn't like the one for the s3 but apparently this one is better as the adhesive is all over.
Click to expand...
Click to collapse
I got the tr, I think its the thinner of the two. Its definitely fully adhesive, I love it.
spigen GLAS.tr for what phone?
bobbydsiu said:
I got the tr, I think its the thinner of the two. Its definitely fully adhesive, I love it.
Click to expand...
Click to collapse
Spigen GLAS.t SLIM = non-rounded borders - (0.23mm) - thinner
Spigen GLAS.tR SLIM = rounded borders (0.4mm)
You're correct the t is the thinner material. Either way it feels great and installs fairly easily.
I had the glas for the s2, I LOVED(easy to clean the screen of finger oils) it, however, it attracted dust underneath the screen protector due to adhesive being only at the edges, I took it off after a couple of months. With the full adhesive, i will definitely buy again for my soon to arrive S4. Especially since I just dropped my s2 face down on the ground and broke the screen a couple weeks back (without case), the glas would serve as a shield.

Filling screen scatch before applying Glass slim.t

Hello guys,
I was just wondering if there was a way to fill a few scratches on the phone's screen before applying the Spigen Glas.t slim protector just so they will no longer be visible after the glass has been applied to the screen. It's not terrible at all but it would just be nice to feel like I haven't dropped my new phone.
Thanks!
Dimitri Stephan said:
Hello guys,
I was just wondering if there was a way to fill a few scratches on the phone's screen before applying the Spigen Glas.t slim protector just so they will no longer be visible after the glass has been applied to the screen. It's not terrible at all but it would just be nice to feel like I haven't dropped my new phone.
Thanks!
Click to expand...
Click to collapse
If you will to apply Spigen Glass.TR (tempered glass) on top of it I think it will be taken care automatically as Glass.TR has liquid glue on its back side that will fill up the screen scratches once you put on it.
nlatifolia said:
If you will to apply Spigen Glass.TR (tempered glass) on top of it I think it will be taken care automatically as Glass.TR has liquid glue on its back side that will fill up the screen scratches once you put on it.
Click to expand...
Click to collapse
I bought the Glas.t. which is the much slimmer version. You still think the same holds true?
If not deep scratches then doesn't matter, they hold the same amount of liquid glue regardless the type of glass.tr. If the scratches too deep just make sure to do it as cleanly as possible otherwise dust/air will get trapped in between.
Sent from my SM-N900 using Tapatalk
nlatifolia said:
If not deep scratches then doesn't matter, they hold the same amount of liquid glue regardless the type of glass.tr. If the scratches too deep just make sure to do it as cleanly as possible otherwise dust/air will get trapped in between.
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
The scratches can be felt slightly when you pass a fingernail on them so I guess that means they are deep! I really hope the gel will fill the scratches and make them invisible. That way I wont have to replace the screen.

Finally found a full glass screen protector

Ordered this off eBay and its great. Covers the whole glass on the phone and does NOT have the halo effect around the glass but only near the home button which isn't much. The borders are black to possibly hide the halo, and or parts of the glass that isn't touching the screen itself. Pictures were taken on a Nexus 5 so you know where I'm getting at.
http://www.ebay.com/itm/23154906205...49&var=530790694087&ssPageName=STRK:MEBIDX:IT
Here are the pictures. I'll post the eBay link in just a bit.
Is that the Araree brand one?
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
droidhd said:
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
Click to expand...
Click to collapse
Just added the link. This one doesn't seem to have a brand but they may all come from the same factory with different branding.
hii .. how does the phone fit in a case ? does the edges of the screen protector get pushed by the case ?
Is that really full cover? edge cover?
It does cover edges but i would like to see one on gold s6. Also to OP, how is around home button now?
The glass covers the entire front of the phone. The camera, proximity sensor and wraps around the home button. I haven't tested it with other cases besides the ringke slim case and it is just fine. I'm guessing it should be fine with others as well. There is no portion of the front glass exposed with this on except for this home button and the ear speaker.
Sent from my SM-G920T using Tapatalk
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
corb06 said:
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
Click to expand...
Click to collapse
Yes, all the way to the edge. It has a black border around the edges so if there is any halo effect, you cannot see it. I've tested it with both the Ringke Fusion and Slim case and it's not pushing the screen protector up. I imagine some cases may lift the protector.
Thanks, just ordered one.
Nillkin has an even cooler tempered glass protector, look here:
Definitely going to check this out in black
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=1&cid=1&scid=33&id=5045&page=1
http://www.nillkin.com/uploads//2015040719354873499.jpg
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Great just what i was looking for!
Thanks for sharing OP
asdfvtn said:
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Click to expand...
Click to collapse
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Blooody marvellous!!
Cameron_S said:
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Click to expand...
Click to collapse
My guess as well. It does wrap all around the phone and the glass is edge to edge unlike others. It may lift with other protectors who have a lip around the screen. Its a great protector and wanted to share with everyone here since we are all looking for one that covers the whole front glass and this is it.
Sent from my SM-G920T using Tapatalk

Tempered Glass Screen Protector For The Back of Honor 8

Stumbled upon this and thought it may be good to share with the members here.
https://www.amazon.com/Protector-Nillkin-Anti-Explosion-Hardness-Tempered/dp/B01J1D7RTI
Bought one and tried - verdict: it's less prone to fingerprints. Now I'll be looking for a bumper case next
Does it lift on the sides? I have their front screen protector and it lifts on the edges.
Bought one from http://m.aliexpress.com/item/32701520282.html
And it was probably even easier to set up than the front. Unfortunately it does lift on the edges as well. I have yet to find one that doesn't have that effect. Then again the 2.5d glass makes it difficult like that.
An alternative
Hello people of honor
I found a very cheap alternative back protector on ali today.
https://www.aliexpress.com/item/2-P...-8-Clear-Ultra-Thin-Slim-Fit/32756887262.html
It says the material is carbon fibre. According to pictures, it's partialy transparent. Also it should help with grip (hearing the phone is very slipery, still awaiting mine). The question is, how will it look on the phone. Could be somewhere betweeen good and an absolute abomination.
I ordered one today, I'll post here when I get mine (and my phone) if I remember & won't feel lazy.
Ohhhh that actually looks nice! Looking forward to seeing how it looks.
Is there a completely clear thin back film? I just want one to protect from scratches while still using a case
Notchr302 said:
Is there a completely clear thin back film? I just want one to protect from scratches while still using a case
Click to expand...
Click to collapse
The link from OP does come with front and back layer.
faizalotai said:
The link from OP does come with front and back layer.
Click to expand...
Click to collapse
Tempered glass is NOT what I'm looking for. That's intended to use without a case. I need the old standard thin protector to leave no bulk while still using a case
Notchr302 said:
Tempered glass is NOT what I'm looking for. That's intended to use without a case. I need the old standard thin protector to leave no bulk while still using a case
Click to expand...
Click to collapse
My bad..lol
mine using this one
https://www.amazon.com/gp/product/B01J1D7KU4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
the back layer thinner than front 0.3mm layer
I bought nillkin 0.2mm tempered glass protector for the front and it also came with a plastic protector for the back. I bought the carbon fiber back protector and it is garbage. The hole cutouts are off and it doesn't stick to the back that well. I'm just using the one included with nillkin.

incipio NGP Pure Case with tempered Glass

Hi,
I've ordered last week a NGP Pure Case for my white PH1 last week. Question is : I saw on Amazon that it won't fit with tempered glasss like orzero. I don't have orzero tempered glass, I have this one : https://www.amazon.com/Essential-Sc...74582&sr=1-1&keywords=lamshaw+essential+phone that NOT covers edges.
So do you think Pure Case will be fine for me ?
Thanks for your future answers.
I think you will be fine. The case only covers a very tiny area of the screen, enough to protect it but also to lift most screen protectors. From the amazon image and the fact that I use that incipio case I am like 90% sure that screen protector wont lift
TheDethEgineer said:
I think you will be fine. The case only covers a very tiny area of the screen, enough to protect it but also to lift most screen protectors. From the amazon image and the fact that I use that incipio case I am like 90% sure that screen protector wont lift
Click to expand...
Click to collapse
You have it ? Can I have a pic plz ?
EDIT : If u want a pic of my tempered
http://reho.st/view/self/5f8cd6acb097dc6cf027725f7aabba1752b9e6de.jpg
There you go
thanks, u have a tempered ?
EDIT : Check my tempered on the link and tell me
When using this case i recommend a "Case Friendly" screen protector, tempered glass ones I have pop up around the top of the device. Just about to order https://www.amazon.com/dp/B075P1FSDX/_encoding=UTF8?coliid=I1IR0821FMR2TC&colid=3IFPSSR1GMYZN
basongwe said:
thanks, u have a tempered ?
EDIT : Check my tempered on the link and tell me
Click to expand...
Click to collapse
No, I have a skinomi screen protector
Okay, so i'm worried again... :/
Cause i've a tempered (even if it doesn't fit the corners as u can see here : http://reho.st/view/self/5f8cd6acb097dc6cf027725f7aabba1752b9e6de.jpg )
basongwe said:
Okay, so i'm worried again... :/
Cause i've a tempered (even if it doesn't fit the corners as u can see here : http://reho.st/view/self/5f8cd6acb097dc6cf027725f7aabba1752b9e6de.jpg )
Click to expand...
Click to collapse
looks like you got an all area adhesive screen protector which lifts off at the curved screen edges. Since it's already slighty lifted off at the edges I think there is no problem putting the Incipio on. The Incipio case is a problem for screen protectors which only have adhesive at the very edge, specifically at the top of the screen where the camera cutout is located. It will push and lift the adhesive off and since there is no other adhesive further down, the screen protector pretty much lifts all the way up. You then have a "clicking" sound when you tap onto that area (the adhesive will temporarily stick and then pop off when you let go).
Your screen protector is not perfectly centered and you may have small issues at the top and the bottom right where it comes close to the edge. Maybe you can re-center it.
derausgewanderte said:
looks like you got an all area adhesive screen protector which lifts off at the curved screen edges. Since it's already slighty lifted off at the edges I think there is no problem putting the Incipio on. The Incipio case is a problem for screen protectors which only have adhesive at the very edge, specifically at the top of the screen where the camera cutout is located. It will push and lift the adhesive off and since there is no other adhesive further down, the screen protector pretty much lifts all the way up. You then have a "clicking" sound when you tap onto that area (the adhesive will temporarily stick and then pop off when you let go).
Your screen protector is not perfectly centered and you may have small issues at the top and the bottom right where it comes close to the edge. Maybe you can re-center it.
Click to expand...
Click to collapse
Small issues are not a big deal, if u think I can use both ?
andril said:
When using this case i recommend a "Case Friendly" screen protector, tempered glass ones I have pop up around the top of the device. Just about to order https://www.amazon.com/dp/B075P1FSDX/_encoding=UTF8?coliid=I1IR0821FMR2TC&colid=3IFPSSR1GMYZN
Click to expand...
Click to collapse
I can vouch for this one. It fits great with my Tudia TAMM case. It's a TPU just like the Skinomi and IQ but a dry install. You peel off a small horizontal strip at the top to expose the adhesive. Position it starting at the top and then bend it a little to start separating the rest of the backing and start pushing your way down the screen so the backing comes off completely at the end. It's really grippy at first but that will pass as you use your phone. Since it is a TPU it will develop marks on it over time if you're not careful so be careful installing when trying to push out bubbles or whatever. I used a credit card wrapped in microfiber cloth and pushed out the bubbles before removing the top protective film. If you have bubbles that won't easily work out they will disappear after a few hours.
Best option so far IMO. I had the Delta Shield TPU before and the TAMM case push up the corners and edges.
Sent from my PH-1 using Tapatalk
So with my tempered, it will pop out or no ? :/
basongwe said:
So with my tempered, it will pop out or no ? :/
Click to expand...
Click to collapse
If you look at your picture your screen is already lifted off at the edges (read my previous post). So it is probably not a big deal
Hope you're right
But what do you mean by lifted ? My tempered should put off by itself with time ?
Tikerz said:
I can vouch for this one. It fits great with my Tudia TAMM case. It's a TPU just like the Skinomi and IQ but a dry install. You peel off a small horizontal strip at the top to expose the adhesive. Position it starting at the top and then bend it a little to start separating the rest of the backing and start pushing your way down the screen so the backing comes off completely at the end. It's really grippy at first but that will pass as you use your phone. Since it is a TPU it will develop marks on it over time if you're not careful so be careful installing when trying to push out bubbles or whatever. I used a credit card wrapped in microfiber cloth and pushed out the bubbles before removing the top protective film. If you have bubbles that won't easily work out they will disappear after a few hours.
Best option so far IMO. I had the Delta Shield TPU before and the TAMM case push up the corners and edges.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Looks like availability its after xmas..
Sent from my PH-1 using Tapatalk
basongwe said:
But what do you mean by lifted ? My tempered should put off by itself with time ?
Click to expand...
Click to collapse
look carefully at the picture you took. I had this with all my curved screen phones. the lighter edge you see is where the screen protector is not attached. If you have not noticed it yet then I'm afraid I just ruined your enjoyment with it.
sorry
Mine lift the tempered glass. Unless they make one a little smaller I don't think it will work.
I think I am going to just go with the Incipio case and nothing more. The screen seems more responsive.
Sent from my PH-1 using Tapatalk
Should've went with the DualPro from Incipio. I just got a black one and not only is it the highest quality case I've seen for the device but it fits just fine with Orzero TGP on.
EDIT: Felt as though I should add a caveat that applied to me, likely applies to a lot of folks having issues trying to use a case and screen protector simultaneously. You really need to nail the placement of the screen protector in order to prevent case interference, when centered as perfectly as is reasonable I have not encountered any issues with lifting but it did take two attempts to hit the sweet spot. You're much more likely to encounter lifting if the screen protector is favoring one side even slightly, so those guide stickers that you tend to want to chuck actually come in very handy when trying to get the placement just right.

Categories

Resources