Related
So as many of you waiting for your pre-orders last week I went ahead and looked for an ultra slim case for everyday use. Spigen seemed to be a household name and went ahead and bought their Ultra Fit for $10:
http://www.amazon.com/gp/product/B00I3ULRZG
I was satisfied with it, matte white, fit perfect and snug, protected the back camera and sensors when placed on a table, nothing to complain about. I had thrown out the screen cover because the cut outs were not precise at all, in fact there was no cut out for the upper sensors, only for the home button. Why would i ruin front camera quality with the screen protector over it? yuck.
I then came across Ringke Slim. I have never heard of them before but judging by their high number of reviews, it seemed that they were well versed as well in the case game. at this time i also wanted to get an electric blue case because i got tired of plain white super quick. Also, the screen protector actually had the PERFECT cut out for all sensors and front camera. This was super impressive to me and I gladly put it on even though I don't care much for screen covers in general. This is what i ordered for $9 including shipping:
http://www.amazon.com/gp/product/B00IPKHP64
Well i received it today and WOW it was made of a far superior plastic. It wasn't because it was thicker but it felt very different. it felt more denser, less paper like. i compared tapping each and the Spigen was very "airy" felt cheap and very "hollow" (best way i could describe it). The sides were completely covered as opposed open which isn't a bad thing but it did feel more complete as a case. Cut outs were perfect as well and charging hasn't been a problem. I quickly realized the Spigen case is actually not as great as I thought now that I had something to really compare it to. I started seeing on the Spigen where the plastic was punched out of the mold (check picture).
Anyways enough talk here's the pictures:
http://dl-1.va.us.xda-developers.co....jpg?key=nBsLK_haY5suFrjdcOa0hA&ts=1397604778
And the gallery plus the Spigen white case for comparison. Notice the inside of the Spigen, wasn't even spray painted completely most likely because they used a clamp to spin it while spraying
http://imgur.com/a/MxMFH
As you can tell Ringke > Spigen in the affordable ultra slim case category.
chillsen said:
So as many of you waiting for your pre-orders last week I went ahead and looked for an ultra slim case for everyday use. Spigen seemed to be a household name and went ahead and bought their Ultra Fit for $10:
http://www.amazon.com/gp/product/B00I3ULRZG
I was satisfied with it, matte white, fit perfect and snug, protected the back camera and sensors when placed on a table, nothing to complain about. I had thrown out the screen cover because the cut outs were not precise at all, in fact there was no cut out for the upper sensors, only for the home button. Why would i ruin front camera quality with the screen protector over it? yuck.
I then came across Ringke Slim. I have never heard of them before but judging by their high number of reviews, it seemed that they were well versed as well in the case game. at this time i also wanted to get an electric blue case because i got tired of plain white super quick. Also, the screen protector actually had the PERFECT cut out for all sensors and front camera. This was super impressive to me and I gladly put it on even though I don't care much for screen covers in general. This is what i ordered for $9 including shipping:
http://www.amazon.com/gp/product/B00IPKHP64
Well i received it today and WOW it was made of a far superior plastic. It wasn't because it was thicker but it felt very different. it felt more denser, less paper like. i compared tapping each and the Spigen was very "airy" felt cheap and very "hollow" (best way i could describe it). The sides were completely covered as opposed open which isn't a bad thing but it did feel more complete as a case. Cut outs were perfect as well and charging hasn't been a problem. I quickly realized the Spigen case is actually not as great as I thought now that I had something to really compare it to. I started seeing on the Spigen where the plastic was punched out of the mold (check picture).
Anyways enough talk here's the pictures:
http://dl-1.va.us.xda-developers.co....jpg?key=nBsLK_haY5suFrjdcOa0hA&ts=1397604778
And the gallery plus the Spigen white case for comparison. Notice the inside of the Spigen, wasn't even spray painted completely most likely because they used a clamp to spin it while spraying
http://imgur.com/a/MxMFH
As you can tell Ringke > Spigen in the affordable ultra slim case category.
Click to expand...
Click to collapse
Agreed, i bought both through amazon, and while i didnt care to use any of the screen protectors the Ringke is MUCH better and really sleek looking. Material kind of feels like the back of the phone and even looks like the back. Only downside is i hate trying to get the freaking waterproof flap out at night! Grrrr
I too have this case and am liking it.
It is hard to hook your fingernail to get the charging flap open although I assume most cases will be similar.
Ok...I'll jump aboard. I bought two cases before I got the S5 in my hands. One was the Ringke and the other was the Spigen Tough Armor.
While the Tough Armor is a very solid case and looks great, it makes the S5 feel like a brick in my hands. On the other hand, the Ringke Slim has a similar texture and gripability as the S5 naked. It doesn't even feel like the device has a case on it at all.
Nice! Defo would give Spigen a run for its money! Great to see competition here and there. At the end, we, the consumers, would benefit on it. More options, right?
Yea I just orderd 2 new Ringke cases. Ill post em up when they comr in tomorrow
Sent from my Nexus 7 using Tapatalk
thanks for this review man. Was about to order a spigen case and then saw this and after a little more research i just ordered the ringke. I went with the Dot black, I'll post up some pictures to compare with other colors once it comes in.
I got the DOT black I ordered from their site and got the case plus screen protector for $10 with free shipping
Sent from my GT-I9505G using xda app-developers app
I got this case delivered today.. It is AWESOME and for 5 bucks it was a steal.. I crumbled up the useless screen protector and threw it out
I should have gotten white though, because my phone is white and I got the blue color. It kind of looks funny.. I thought blue and white would look good.
It doesn't
I got the spigen neohybrid case and their glas.tr slim glass screen protector. Had literally the same setup on my s4 lol same yellow trim too
Sent from my SM-G900T using Tapatalk
Paulenski said:
I got the spigen neohybrid case and their glas.tr slim glass screen protector. Had literally the same setup on my s4 lol same yellow trim too
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
I love that spigen hybrid case, SEXY!! but I went through 3 F-#@[email protected]# plastic sleeves, they always broke on the bottom eventually.
So the screen protector is garbage
Sent from my GT-I9505G using xda app-developers app
chillsen said:
So as many of you waiting for your pre-orders last week I went ahead and looked for an ultra slim case for everyday use. Spigen seemed to be a household name and went ahead and bought their Ultra Fit for $10:
http://www.amazon.com/gp/product/B00I3ULRZG
I was satisfied with it, matte white, fit perfect and snug, protected the back camera and sensors when placed on a table, nothing to complain about. I had thrown out the screen cover because the cut outs were not precise at all, in fact there was no cut out for the upper sensors, only for the home button. Why would i ruin front camera quality with the screen protector over it? yuck.
I then came across Ringke Slim. I have never heard of them before but judging by their high number of reviews, it seemed that they were well versed as well in the case game. at this time i also wanted to get an electric blue case because i got tired of plain white super quick. Also, the screen protector actually had the PERFECT cut out for all sensors and front camera. This was super impressive to me and I gladly put it on even though I don't care much for screen covers in general. This is what i ordered for $9 including shipping:
http://www.amazon.com/gp/product/B00IPKHP64
Well i received it today and WOW it was made of a far superior plastic. It wasn't because it was thicker but it felt very different. it felt more denser, less paper like. i compared tapping each and the Spigen was very "airy" felt cheap and very "hollow" (best way i could describe it). The sides were completely covered as opposed open which isn't a bad thing but it did feel more complete as a case. Cut outs were perfect as well and charging hasn't been a problem. I quickly realized the Spigen case is actually not as great as I thought now that I had something to really compare it to. I started seeing on the Spigen where the plastic was punched out of the mold (check picture).
Anyways enough talk here's the pictures:
http://dl-1.va.us.xda-developers.co....jpg?key=nBsLK_haY5suFrjdcOa0hA&ts=1397604778
And the gallery plus the Spigen white case for comparison. Notice the inside of the Spigen, wasn't even spray painted completely most likely because they used a clamp to spin it while spraying
http://imgur.com/a/MxMFH
As you can tell Ringke > Spigen in the affordable ultra slim case category.
Click to expand...
Click to collapse
Got anymore images? Link doesn't work for me!
I like the case. It feels good in your hand when you hold the phone.
One thing though, on my case the lip around the chrome front trim sides covers more than the lip on the top and bottom. At first I thought I didn't snap it in all the way but it seems like that's just the way it is? Is that how it fits for the rest of you that already have the case?
pgibbons said:
I like the case. It feels good in your hand when you hold the phone.
One thing though, on my case the lip around the chrome front trim sides covers more than the lip on the top and bottom. At first I thought I didn't snap it in all the way but it seems like that's just the way it is? Is that how it fits for the rest of you that already have the case?
Click to expand...
Click to collapse
That's how they all are. Actually I really like this design. It's almost as if its spring loaded, its smaller than our phone, it doesn't just fit like a glove, its actually too small. But the cut outs on the top and bottom allow the plastic to "flex" basically its as if its gripping the hell out of phone, holding into place.
The Spigen hybrid I had for my GS4 was awesome looking, but broke all the time (plastic by the bottom) in anycase, this one is just as nice IMO.
Doesn't add much thickness at all, but will save it from a drop and the camera while on a desk.
If anyone is wondering, I just dunked my phone for 30 minutes with this case. So it doesn't effect the IP68(yea, I said 8, because this thing is pretty much water PROOF) rating.
http://m.aliexpress.com/item/1720284970.html
What are the odds of these cases being fake
Sent from my GT-I9505G using xda app-developers app
@chillsen Hey OP, after I read your 1st psot I figured id give it a shot. I've had bad experiences with her cases and the one that you posted a pic of, is the same one I got as well. I got it 3 days ago, and still haven't put it on, in fear it will scratch the outer bezel while putting it on, and taking it off
Have on had this issue at all? Seems like a real snug fit, thought if ask before I pushed my hone into the car lol.... Thanks bud!
Sent from my SM-G900P using Tapatalk
reverepats said:
@chillsen Hey OP, after I read your 1st psot I figured id give it a shot. I've had bad experiences with her cases and the one that you posted a pic of, is the same one I got as well. I got it 3 days ago, and still haven't put it on, in fear it will scratch the outer bezel while putting it on, and taking it off
Have on had this issue at all? Seems like a real snug fit, thought if ask before I pushed my hone into the car lol.... Thanks bud!
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
i can only say i've had to take the case off and on many times to show off to my friends how thin the actual phone is. i mastered how to take it off by pressing outwards the top left corner. you push it out enough so you can fit a finger through and i just slide it down the side and the whole case pops off. this is the easiest way i found. at first i had a problem because i didn't try a corner but started from the middle of the long side. but to answer your question, no scratches.
LeKtRiCzzz said:
http://m.aliexpress.com/item/1720284970.html
What are the odds of these cases being fake
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
I'm 100% sure they are fake. Look at the feedback page, it's full of "Excellent!" and "good quality" multiple times by the same few user accounts.
I just got this delivered today with the white dot pattern. I also ordered the wireless charging back the other day, definitely don't think wireless charging will work with this on - what an idiot I am.
Hi folks,
Just wanted to share my experience with this new case that I got last week, it's called Crusta, made by Amzer, I have used Amzer products in the past, but this case is something very different from their regular stuff I have used in the past.
Since, I have replaced 2 screens on my S5 in last 4 months, I really wanted to get something which protects the device, don't want to spend more money on repairs, initially thought of going ahead with OtterBox but I saw an ad on Facebook for Crusta. Having used Amzer in past, I ordered it (even got 25% off part of their promotion!)
Really loving the case, it is a bit on the bulky side, but not as much as an otter box, it is right mix of protection and style, they claim it is 6 feet drop proof, it did fall out of my pocket 2-3 times and no visible damage. The thing i really like about this case is that it came with a very nice and tough glass screen protector and a belt clip. Really neat bundle. The back of the case is very nice and stylish with clear backing. Only wished this case was waterproof, but for $45 its a great buy, I got yellow and black combo, but really good color options, lots of them.
If you are looking to get an otterbox, i would suggest you give this a try and save some money!
Have a look here - www.amzer.com/crusta
I will be posting pictures after I manage to get some decent pictures from my second phone
cupcake2301 said:
Hi folks,
Just wanted to share my experience with this new case that I got last week, it's called Crusta, made by Amzer, I have used Amzer products in the past, but this case is something very different from their regular stuff I have used in the past.
Since, I have replaced 2 screens on my S5 in last 4 months, I really wanted to get something which protects the device, don't want to spend more money on repairs, initially thought of going ahead with OtterBox but I saw an ad on Facebook for Crusta. Having used Amzer in past, I ordered it (even got 25% off part of their promotion!)
Really loving the case, it is a bit on the bulky side, but not as much as an otter box, it is right mix of protection and style, they claim it is 6 feet drop proof, it did fall out of my pocket 2-3 times and no visible damage. The thing i really like about this case is that it came with a very nice and tough glass screen protector and a belt clip. Really neat bundle. The back of the case is very nice and stylish with clear backing. Only wished this case was waterproof, but for $45 its a great buy, I got yellow and black combo, but really good color options, lots of them.
If you are looking to get an otterbox, i would suggest you give this a try and save some money!
I will be posting pictures after I manage to get some decent pictures from my second phone
Click to expand...
Click to collapse
I've been looking for a case/holster combination and just came across this one. I had previously ordered the Seidio Dilex and was not happy with it mainly because it is so slick. The Seidio adds quite a bit of bulk also but I think I'd be ok with that if it just wasn't so slippery. Can you tell me a little about the holster? I need something that holds the phone safely. I prefer holsters that rachet and need a little force to spin around. What do you think about this one?
How'd you get 25% off? I'm interested in possibly ordering one.
v3rn said:
How'd you get 25% off? I'm interested in possibly ordering one.
Click to expand...
Click to collapse
Back2School is the code. It shows it right on the top of the amzer page
palolake said:
I've been looking for a case/holster combination and just came across this one. I had previously ordered the Seidio Dilex and was not happy with it mainly because it is so slick. The Seidio adds quite a bit of bulk also but I think I'd be ok with that if it just wasn't so slippery. Can you tell me a little about the holster? I need something that holds the phone safely. I prefer holsters that rachet and need a little force to spin around. What do you think about this one?
Click to expand...
Click to collapse
So I also have the Seidio Dilex and I ordered a Crusta just to see what the differences were. Here's what I noticed aside from what the OP stated:
-The belt clip, where it attaches to the belt, has a lot tension so it grabs tightly
-It is a U-Clip on the clip, but instead of a solid piece it is two "teeth" that wrap underneath the belt
-Phone case seems to fit loosely when the screen is facing out/clips in very tightly with screen facing inward (I prefer screen facing in)**
-The rotating clip looks like a gear assembly. When you turn it, it settles into the grooves and won't spin so it is omni-directional
-Online photos looks like the camera would be touching if laid on its back. The outer edge of the case keeps it from touching so no worries there
-Heart rate sensor is easily accessed and works well. Fingerprint scanner will work, but you will have to be accurate since the rubber has no give
-The Amzer is thicker overall than the Seidio Dilex and probably the exact same width as the Seidio would be if the kickstand went all the way up
**Might just be my case, OP would have to chime in
My overall so far is that I like it, but I want to test out the belt holster more before I wholeheartedly recommend it. The case is good and I love the tempered glass screen protector that came with it. The rubber is not slick at all and has a fake stitching look around the front face for aesthetics I suppose? Also, with this case on it barely fits in my Nathan's runners belt. Granted it is the smallest runner's belt, but with the grippy case rubber around it I won't be able to easily take it in and out to change songs or answer calls after I get it in there.
I'd like to post some pictures, but I need some suggestions of the best place to upload them for posting here? I just wondered what others would use and if you would like any specific pictures I am happy to oblige. I'll do a breakdown and couple of size comparison shots with the Dilex.
Edit: I personally won't be using the fingerprint scanner because as I found out, it you register a fingerprint while the case is on you should be able to unlock it. If you register it with the case off and put the case on, it most likely won't accept the scan. My experience was scanning in a fingerprint with the case on and took the case off to take pictures and it wouldn't take my fingerprint at that depth. If you are never going to take the case off this may work for you. However if you have pre-registered fingerprints and you put the case on you may lock yourself out. Just my experience.
palolake said:
I've been looking for a case/holster combination and just came across this one. I had previously ordered the Seidio Dilex and was not happy with it mainly because it is so slick. The Seidio adds quite a bit of bulk also but I think I'd be ok with that if it just wasn't so slippery. Can you tell me a little about the holster? I need something that holds the phone safely. I prefer holsters that rachet and need a little force to spin around. What do you think about this one?
Click to expand...
Click to collapse
I would suggest this case for sure, though I don't buckle the phone to my waist much, but the holster is really nice and high quality, the clip for rotation is also very smooth but at the same time not 'loose'. The video on their site says to put the phone face in for best results, but even face out is ok, the holster really holds the phone in really well.
My past experience with a seidio case for my S4 wasn't that great either, they tear up after some time and the support team is really not upto the mark. This case is not exactly thin, but it's a lot less than Otterbox, also this case has very very good grip on the TPR ring they have provided, so it won't be slippery like Seidio for sure.
v3rn said:
How'd you get 25% off? I'm interested in possibly ordering one.
Click to expand...
Click to collapse
I ordered during the independence day sale, i think they have back to school sale right now, which i'm going to use to order a case for my friend's iPhone 5s for which they have the crusta now. Try code BACK2SCHOOL - might work.
I will try to post some pictures today.
Regarding the Amzer Crusta!!!!
OMG that case is beautiful. Just looked online. That is absolutely a find. Called then and long to order.
Thank you!
Sent from my SM-G900T using XDA Premium HD app
I made an Imgur album with 18 pictures of the case. I added captions to a few of them to make more sense of what you're looking at. I hope this helps anyone looking to purchase this and if you have questions, just ask.
http://imgur.com/a/mfTZO#0
I purchased one and periodically I'd take off the case to showcase the phone's build quality because my friends were curious and today I noticed after owning and using the case for about 2 weeks that it leaves scratches all around the metal band. So now the entire front metal band on my phone is completely scratched up because of this case. So please stay away from this case and save your money for something better.
Well since you started. Ill continue.
The fusion one i got is warped at the bottom where charge port goes.
It fits well everywhere else except there. Im not gona damage my charge port because i have to force a charger in there due to the case firment issues.
Its very slippery and either i have oily fingers or the back of the case has an oil leak like my car.
The one i wanted to check out was the fusion max protect? Something like that.
But the tech21 looks like will get my monies once its available to other vendors
alfadog77 said:
I purchased one and periodically I'd take off the case to showcase the phone's build quality because my friends were curious and today I noticed after owning and using the case for about 2 weeks that it leaves scratches all around the metal band. So now the entire front metal band on my phone is completely scratched up because of this case. So please stay away from this case and save your money for something better.
Click to expand...
Click to collapse
It might help if you explain which one you purchased, I purchased this one and have had NO PROBLEMS at all
http://ecx.images-amazon.com/images/I/81qw6h1esML._SL1500_.jpg
tat2me2 said:
It might help if you explain which one you purchased, I purchased this one and have had NO PROBLEMS at all
http://ecx.images-amazon.com/images/I/81qw6h1esML._SL1500_.jpg
Click to expand...
Click to collapse
sorry it's a black Ringke Slim case with the ultra HD screen protector. bought on amazon for 8.99
Sent from my SM-N910T using XDA Free mobile app
I use the same case, remove it on weekends. I've been lucky I guess, because I have no real scratches on mine.
Rippley05 said:
I use the same case, remove it on weekends. I've been lucky I guess, because I have no real scratches on mine.
Click to expand...
Click to collapse
I've been doing some more research and apparently it's not the case but more of small particles of debris rubbing on the soft aluminum finish. So it's not really more of the cases fault and more it happening eventually from any case. either way still disappointing because my entire front looks beat. Oh well i'll learn to live with it.
people dont know how to take the case off so they mess up the phone and blame the case...pretty sure u are takin the case off wrong...if you buy a rinke...and rake it off like a tpu case...its gonna scratch!!!! ...its hard plastic ..raking it off will make it hold even tighter!
alfadog77 said:
I've been doing some more research and apparently it's not the case but more of small particles of debris rubbing on the soft aluminum finish. So it's not really more of the cases fault and more it happening eventually from any case. either way still disappointing because my entire front looks beat. Oh well i'll learn to live with it.
Click to expand...
Click to collapse
So, maybe change the title of the thread? I have the same case as you...and no scratches.
DruoGaby said:
people dont know how to take the case off so they mess up the phone and blame the case...pretty sure u are takin the case off wrong...if you buy a rinke...and rake it off like a tpu case...its gonna scratch!!!! ...its hard plastic ..raking it off will make it hold even tighter!
Click to expand...
Click to collapse
Educate the public on how to remove a case then...
I also purchased this case and in 2 days it has scuffed up the sides as well.
As others have said, how do you take off a RingKe case without messing up your phone?
I personally went with Seidio and glad I did. Almost brought a ringke but I'm glad I didn't. Wouldn't have known how to properly remove it. I recommend the OP leave the tittle the way it is. Even if it is the OP using it wrong, word needs to get out that these type of cases need a special touch on them or they ruin the look of your device.
its going to happen with other cases as well
http://forums.androidcentral.com/sa...71-samsung-galaxy-note-4-spigen-uc-cases.html
jrdejavux said:
its going to happen with other cases as well
http://forums.androidcentral.com/sa...71-samsung-galaxy-note-4-spigen-uc-cases.html
Click to expand...
Click to collapse
Glad I got my body glove satin case, I often take it out to show friends and not one scratch on white note 4
this is true mine has scraches whenever i remove the case and i dont remove it ofter
TPU is fine, stay away from the polycarbonate cases
Yikes, I'm sorry your phone got scratched up. I have the same case in SF Black and I remove it to switch batteries every night. So far, not a single scratch from it, maybe I'm lucky. I know it's weird, , but maybe it's the way you remove it? I usually turn my phone upside down and use my nail to expand the corner outward, before moving to the top (now bottom) part of the case to do the same.
As others have mentioned, be wary of dust and other particles that may get between the case and the bezels. I always give a quick blow into the case and a wipe with microfiber before placing my (also wiped down) phone back into it.
It sucks that it scratched your phone, but I can't say I've had the same experience, this is my favorite and go-to case for my Note 4.
alfadog77 said:
I purchased one and periodically I'd take off the case to showcase the phone's build quality because my friends were curious and today I noticed after owning and using the case for about 2 weeks that it leaves scratches all around the metal band. So now the entire front metal band on my phone is completely scratched up because of this case. So please stay away from this case and save your money for something better.
Click to expand...
Click to collapse
I got the clear Ringke and have been using it over the weekend and it seemed ok. I haven't taken it on and off alot though. I wonder how the tpu is scratching it? I also saw a review of the same thing for the spigen clear case so I ordered one to see what was up. Do you have the white or black note 4? Could we see some pics please?
I also have the iBlason clear off amazon and it seems to be ok.
---------- Post added at 11:41 PM ---------- Previous post was at 11:17 PM ----------
iowamoe300 said:
I got the clear Ringke and have been using it over the weekend and it seemed ok. I haven't taken it on and off alot though. I wonder how the tpu is scratching it? I also saw a review of the same thing for the spigen clear case so I ordered one to see what was up. Do you have the white or black note 4? Could we see some pics please?
I also have the iBlason clear off amazon and it seems to be ok.
Click to expand...
Click to collapse
Also, after examining the edge of the ringke and the iBlason, the edge seems very sharp and I think this is what is causing the scratches. I am going to try and chamfer the sharp edge and see what happens. I think some emery cloth and a little patience will go a long way.
Hi
Is someone so kind to explain the differences between case materials? Tpu, silicon, policarbon,gel, ...?
Is tpu the same as silicon?
Buying from the Internet is a mess, without touching and trying it before.
Thanks
Camillo
Check out this site
camillo777 said:
Hi
Is someone so kind to explain the differences between case materials? Tpu, silicon, policarbon,gel, ...?
Is tpu the same as silicon?
Buying from the Internet is a mess, without touching and trying it before.
Thanks
Camillo
Click to expand...
Click to collapse
http://www.aandt-industry.com/ompanyews/61-75.html
I don't think it's the cases, I think its the environment. Dusty or sandy environments I believe contribute to the scratching. Particles get between the case and the phone etc. Thats why people have such different experiences with the same cases. Ultimately I hope Samsung comes up with a better exterior design that avoids the soft exposed metal trim. I personally would have preferred the black paint all the way around as it has been far more durable for me. My wife will be going with the S6 when it comes out but only if they do away with the current metal trim thats on the Note 4.
I used a Diztronic TPU on my Galaxy Note 3 so I was very happy to see a preorder on Diztronic's website for a full matte version for the Note 4. I preordered on Nov.16 and received the case on Saturday.
My impressions of this case are very positive. The case is slim and fits the phone nicely. Mine shows no bulging or loose edges. The matte TPU does provide some screen standoff on the front side. I measured this at 0.75mm. Mic, headphone, USB and pen holes align nicely and the buttons retain a nice tactile feel with this case. I use a Verizon Note 4 and can confirm that the case I received DOES have a slotted left side mic opening to support the Verizon Note 4. The button covers are molded into the TPU but have pronounced edges, so they are easy to find without having to look at the phone.
I use the YooTech wireless charging receiver insert and the Diztronic TPU fits nicely with this receiver in place. I do not believe it would fit with the factory wireless charging back as the case fits perfectly to the stock phone. The case does have a small raised ridge around the camera lens and small ridges around the speaker. This gives some protection for the camera lens and keeps the case from "sealing" against the table and muting your notification tones. The area around the flash is open and I am able to very reliably get heart rate readings for S Health, something that isn't easily found with many thicker cases.
The TPU material is quite thin. Diztronic's website says 1.6mm and my measurements seem in line with that number. The case does not add much bulk and for sure feels slimmer in the hand all-around when compared to the Spigen Slim Armor I had been using since I got the phone. I'm sure it won't provide the kind of protection that the Slim Armor does, as the cushioning material is thinner, but it sure does feel nice in the hand while offering some level of protection over a bare phone.
One of the things I really like about this case is the matte finished TPU. It feels smooth and slick in hand and does not show much in the way of fingerprints. The matte finish slides easily in/out of your pocket. Diztronic made a good move by relocating their branding to the side of the case, which adds a little bit of grip and keeps the look super clean overall.
Overall, I'm really impressed with the Diztronic Full Matte TPU case for Note 4. It provides some protection for the phone and is a little more grippy in-hand than the bare phone. I like that the screen stands off a bit and the camera lens is somewhat protected. I also appreciate that the full matte finish doesn't collect pocket lint or gunk and doesn't show much in the way of fingerprints. And it looks classy!
I really like the Note 4 as a caseless device. It feels very slim for its size and feels great. Unfortunately, I know I am going to inevitably drop it at some point and want some protection without making the phone too bulky, which is really easy to do. The Diztronic Full Matte TPU feels like it hits that sweet spot for me. Time will tell, but for now I give it two solid thumbs up.
:good: :good:
I purchased this case direct from Diztronic: LINK I expect they will probably be available via Amazon shortly. They are currently showing as available on Diztronic's website in both matte black and matte grey.
Updated to include Verizon mic confirmation and pics attached.
Does it have an elongated mic opening for Verizon users? This is the case I've been waiting for...always a favorite.
Absolutely loved mine for my previous phone. Best TPU cases imo. Looking forward to seeing your pics.
I'll probably pick one up even though I might opt for a more protective case this time around.
|> transmitted from deep inside a Verizon Note 4 <|
nateinva said:
Does it have an elongated mic opening for Verizon users? This is the case I've been waiting for...always a favorite.
Click to expand...
Click to collapse
THIS i need to know whether or not to buy lol
nateinva said:
Does it have an elongated mic opening for Verizon users? This is the case I've been waiting for...always a favorite.
Click to expand...
Click to collapse
oneandroidnut said:
THIS i need to know whether or not to buy lol
Click to expand...
Click to collapse
Yes, my apologies - I thought I had called that out but must have lost it when editing. The Diztronic Matte TPU DOES have a slot shaped opening which supports Verizon Note 4. My Verizon Note 4 is shown in the pics I've added above.
Ducaticorse said:
Yes, my apologies - I thought I had called that out but must have lost it when editing. The Diztronic Matte TPU DOES have a slot shaped opening which supports Verizon Note 4. My Verizon Note 4 is shown in the pics I've added above.
Click to expand...
Click to collapse
alright cool thanks im ordering one!!
I have updated the original post with pics and confirmation regarding the mic opening and the VZ Note 4. I realized I mentioned this in another case thread but originally failed to include it here.
Ducaticorse said:
I have updated the original post with pics and confirmation regarding the mic opening and the VZ Note 4. I realized I mentioned this in another case thread but originally failed to include it here.
Click to expand...
Click to collapse
Thanks for the update! I just ordered one. I've had a Diztronic case for my last 3 phones and have been happy with all of them. I'm sure this one will be no different.
thanks for the review! i've always been iffy with diztronic, yet i seem to get one per each phone i have just to have one lol..
out of all the TPU's i use, they're always the most bulky which i dislike, because i like them thin..but there's NO good note 4 tpu's out there whatsoever. i'm currently using a clear S line TPU, which is good and all, but the mic holes don't line up perfect, and it doesn't fit as well as it could..plus it's clear, and we all know clear starts looking like crap after a few weeks. i've gotten like 4 other TPU's and shell cases and I hate all of them.
diztronic is nice because they do a lip around the camera, which NO tpu's are doing right now, which means your camera is pretty much flush against the surface which i hate...and they also have two little bumps by the speaker to elevate the speaker off the table so it's not muffled! FINALLY, a TPU maker with some sense knocked into em!
either way, i ordered the gunmetal gray because every diztronic i ever got was always black, so i'm looking for a nice change. ordered today, they say those ship out tomorrow the 26th, so maybe I'll get it by saturday or monday with thanksgiving coming up and all. this will be like my 6th or 7th case already for the Note and I've only been using 1 lol
Does it fit with the OEM Qi back?
jayochs said:
out of all the TPU's i use, they're always the most bulky which i dislike, because i like them thin..but there's NO good note 4 tpu's out there whatsoever. i'm currently using a clear S line TPU, which is good and all, but the mic holes don't line up perfect, and it doesn't fit as well as it could..plus it's clear, and we all know clear starts looking like crap after a few weeks. i've gotten like 4 other TPU's and shell cases and I hate all of them.
Click to expand...
Click to collapse
I don't find the Diztronic bulky at all. The Diztronic for the Note3 was very rounded feeling, where the Note 4 Diztronic is more squared off and edgy, just like the Note 4 itself. I think you'll like it and the holes line up nicely as pictured above.
Flame Red said:
Does it fit with the OEM Qi back?
Click to expand...
Click to collapse
As noted in my review, I do not believe it would fit with the OEM back. I say this because it fits relatively snug as-is with the stock back or stock back + thin Qi receiver. But I don't have an OEM Qi back to try it with.
My black one is scheduled to deliver on Saturday. I will post my thoughts at that time. Not like anyone cares.
WizeGuyDezignz said:
My black one is scheduled to deliver on Saturday. I will post my thoughts at that time. Not like anyone cares.
Click to expand...
Click to collapse
oh hey lagbuddy lol saw you randomly around here, glad to see you're still stalking me and getting every device i get haha
but yeah, my gunmetal gray one is coming saturday! you know what's sad? this one wasn't even out, it was a pre-order, and i'm STILL getting it quicker than this nillkin bumper case i ordered on ebay from Nov 11th. it's from china, yet it's still not here yet. other chinese orders i've gotten took a week, maybe 1.5 weeks. it's over 2 weeks now for this stupid thing and i doubt i'll see it before the diztronic lol
jayochs said:
oh hey lagbuddy lol saw you randomly around here, glad to see you're still stalking me and getting every device i get haha
but yeah, my gunmetal gray one is coming saturday! you know what's sad? this one wasn't even out, it was a pre-order, and i'm STILL getting it quicker than this nillkin bumper case i ordered on ebay from Nov 11th. it's from china, yet it's still not here yet. other chinese orders i've gotten took a week, maybe 1.5 weeks. it's over 2 weeks now for this stupid thing and i doubt i'll see it before the diztronic lol
Click to expand...
Click to collapse
Haha, what's up brother? I really liked my diztronic on my laggy as hell S4.
So I'm hoping to like this one as well. Good luck bro!
Diztronic makes the best TPU cases as far as I'm concerned. I was disappointed when they had to delay the release due to the Verizon mic hole revelation, and ended up going with a UAG case, but anybody looking for a great case for under 10 bucks, this is what you want. I might even pick one up for myself, just in case.
Diztronic is awesome. I had their case on my Note 3, LG G3, and now I'm waiting for the Note 4 case that supports the OEM wireless charging back. They made one for the S5, I really hope they make one for the Note 4!
I ordered mine today. It is only 12 Euro, together with shipping to Ireland, directly from manufacturer's page.
Already have Spigen Capsule and it is great, but flat buttons and flat speaker hole are not perfect for me. Diztronic seems to meet all my requirements. Hope it will appear to be true
Uploaded some extra pics to imgur.
Black Diztronic Note 4
il buono said:
Uploaded some extra pics to imgur.
Black Diztronic Note 4
Click to expand...
Click to collapse
looks good!
Sent from my Samsung Galaxy Note 4 using Tapatalk.
I forgot to post yesterday, but I got my black Diztronic yesterday, a day earlier than estimated. It is the best case I've tried so far, although I haven't tried a lot yet.
The fit is perfect, not too loose or too tight. It adds almost no bulk which I really like. The matte black is awesome and feels great in the hand. Not super grippy, but it will do the job. All of the cutouts are perfect. The camera has enough raise that the lens won't touch a flat surface and the charger fits in without the case interfering. The buttons are also very easy to press, no problems there. In fact, the buttons are easier to press with this case on than without it.
The only thing I noticed is that in a couple areas, the frame moves pretty easily if you pull on it. Especially near the charging port. It doesn't sag at all which is great, but I just wonder if it will become an issue over time. Possibly not but that's the only small thing I've noticed so far.
Other than that, this case is fantastic and blows away any Spigen that makes your phone uneccesarily bulky and for less money.
I do also have an official Samsung protective case coming that is supposed to ship next week. I've heard that's also an amazing case, so I will compare once I get that.
I didn't take any pics of my Diztronic since so many great pics have already been posted. But let me know if you would like to see any.
I really want to use the phone without a case and just a tgsp.. But I am unsure how scratch resistant it is. I am about to receive a replacement phone from Google as my first had issues. What do you guys use?
Definitely get a screen protector. Just having it in my pockets caused many small screen scratches over time.
As for the phone itself, the beveled metal edges around the screen scratch and dent VERY easily. A slight accidental bump can permanently mess it up pretty badly. The back metal of the phone seems to hold up very nicely, though.
i have no screen protector or case and I wouldnt have it any other way. That being said the edges are a thinner metal then a coke can so it will nick easily
This phone is too slippery to use without a case imo. I use a Spigen Thin Fit to help with grip and I'm happy.
Always wrap your thing!
Using a slickwraps skin. It's much easier to hold without a case because it's less heavy and thinner (due to how long the phone is)
I'm using my phone absolutely naked, have insurance in case something happens to it in lieu of a case.
gman88667733 said:
I really want to use the phone without a case and just a tgsp.. But I am unsure how scratch resistant it is. I am about to receive a replacement phone from Google as my first had issues. What do you guys use?
Click to expand...
Click to collapse
I feel the same way however I'd like to keep this phone looking good.. I've gone with the Rhino bumper which is thin, discreet and you can still feel the back of the phone..plus the protection is supposed to be amazing.
The only problem I have now is that the case looks good too so I want to protect that now lol.
30 dollars with shipping, I'm in the UK and it came in under a week. A great case.
All I have on my phone is a dbrand skin. Unfortunately, I had an issue where it dropped a short distance (6 to 12 inches) and landed on a corner and it knicked up that corner near the screen pretty good, but not enough to convince me to buy a case yet... lol Haven't had any problems with any screen scratches or any other cosmetic damages yet.
dladz said:
I feel the same way however I'd like to keep this phone looking good.. I've gone with the Rhino bumper which is thin, discreet and you can still feel the back of the phone..plus the protection is supposed to be amazing.
The only problem I have now is that the case looks good too so I want to protect that now lol.
30 dollars with shipping, I'm in the UK and it came in under a week. A great case.
Click to expand...
Click to collapse
I'm in the UK too. Did you get any customs charges or anything? Was it straight from Rhino shields website? Cheers
AzraelsKiss said:
All I have on my phone is a dbrand skin. Unfortunately, I had an issue where it dropped a short distance (6 to 12 inches) and landed on a corner and it knicked up that corner near the screen pretty good, but not enough to convince me to buy a case yet... lol Haven't had any problems with any screen scratches or any other cosmetic damages yet.
Click to expand...
Click to collapse
Can you post a picture please?
Sent from my Nexus 6P using Tapatalk
gman88667733 said:
I'm in the UK too. Did you get any customs charges or anything? Was it straight from Rhino shields website? Cheers
Click to expand...
Click to collapse
Straight from the evo labs website. No restrictions. Here within a week. I did pay p&p but that's expected. About 4 quid I think.
One thing id like to say though, the rear clearance is not 100% the very centre of the back is slightly exposed, the bumper does not offer complete clearance when you push it against a flat surface.
If you don't know what I mean.
Take your phone and slide the back of it along the edge of a surface, say a mantelpiece or a shelf and whilst the start of the case is covered, towards the middle is not..
Not the end of the world but I'd have liked the clearance, ironically, tech 21 always offers this , something to consider.
theROMinator said:
Can you post a picture please?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Unfortunately, my N6P is my only camera at the moment. I'm sure most people wouldn't even notice the ding from a distance, but every time I run my finger along it, I cry a little inside.
Have a good one!
I have a glass screen protector, a Dbrand black carbon fiber skin for the glass panel on the back, and carry the phone around in a FitBag pouch.
This phone is the first where i must have a case for traction, its soo slippery and i want to hold it casually and treat it like a normal phone. I bet if i had it in my pocket it will just defy gravity and just fly out, would get a skin but seeing how easy it was to bend the bezel with my finger nail, i dont want break it in the first year,
I got one of these, the thinnest case i could find.i know it wont help in a fall but it will help against wear and tear
http://www.aliexpress.com/store/pro...ack-Cover-For-Huawei/1750180_32495581013.html
I've always rocked my phones naked. This time around I'm using a skin. Had a front back skin. Did drop it once too >_<. Thankfully it's just a small dent right above the camera visor. The skin on my phone is slippery so I ordered a more grippier one and took off the front skin because ambient display works better without it.
I have only a d brand frame for the camera.
I have glass screen protector and tried a clear thin case, but am back to no case..just the glass. No problems. I did add a little non-slip round piece to the back..it stays in my pocket just a little better, and totally stops it from sliding off a flat surface.
In and out of pocket all day, I am not real careful about keys or coins and no issues. I have done this with HTC M7,8,9 also with no problems. I hate hiding a good looking phone with an ugly case...and no case I have ever seen enhances the look.
Any one know of a transparant case that is compatible with slickwraps? Bought the galactic series but want some extra protection...
Verstuurd vanaf mijn Nexus 6P met Tapatalk
I think it needs no protector.However,my wife bought an iPely screen protector from Amazon for me.I think it feels perfect.That's great.