I used a Diztronic TPU on my Galaxy Note 3 so I was very happy to see a preorder on Diztronic's website for a full matte version for the Note 4. I preordered on Nov.16 and received the case on Saturday.
My impressions of this case are very positive. The case is slim and fits the phone nicely. Mine shows no bulging or loose edges. The matte TPU does provide some screen standoff on the front side. I measured this at 0.75mm. Mic, headphone, USB and pen holes align nicely and the buttons retain a nice tactile feel with this case. I use a Verizon Note 4 and can confirm that the case I received DOES have a slotted left side mic opening to support the Verizon Note 4. The button covers are molded into the TPU but have pronounced edges, so they are easy to find without having to look at the phone.
I use the YooTech wireless charging receiver insert and the Diztronic TPU fits nicely with this receiver in place. I do not believe it would fit with the factory wireless charging back as the case fits perfectly to the stock phone. The case does have a small raised ridge around the camera lens and small ridges around the speaker. This gives some protection for the camera lens and keeps the case from "sealing" against the table and muting your notification tones. The area around the flash is open and I am able to very reliably get heart rate readings for S Health, something that isn't easily found with many thicker cases.
The TPU material is quite thin. Diztronic's website says 1.6mm and my measurements seem in line with that number. The case does not add much bulk and for sure feels slimmer in the hand all-around when compared to the Spigen Slim Armor I had been using since I got the phone. I'm sure it won't provide the kind of protection that the Slim Armor does, as the cushioning material is thinner, but it sure does feel nice in the hand while offering some level of protection over a bare phone.
One of the things I really like about this case is the matte finished TPU. It feels smooth and slick in hand and does not show much in the way of fingerprints. The matte finish slides easily in/out of your pocket. Diztronic made a good move by relocating their branding to the side of the case, which adds a little bit of grip and keeps the look super clean overall.
Overall, I'm really impressed with the Diztronic Full Matte TPU case for Note 4. It provides some protection for the phone and is a little more grippy in-hand than the bare phone. I like that the screen stands off a bit and the camera lens is somewhat protected. I also appreciate that the full matte finish doesn't collect pocket lint or gunk and doesn't show much in the way of fingerprints. And it looks classy!
I really like the Note 4 as a caseless device. It feels very slim for its size and feels great. Unfortunately, I know I am going to inevitably drop it at some point and want some protection without making the phone too bulky, which is really easy to do. The Diztronic Full Matte TPU feels like it hits that sweet spot for me. Time will tell, but for now I give it two solid thumbs up.
:good: :good:
I purchased this case direct from Diztronic: LINK I expect they will probably be available via Amazon shortly. They are currently showing as available on Diztronic's website in both matte black and matte grey.
Updated to include Verizon mic confirmation and pics attached.
Does it have an elongated mic opening for Verizon users? This is the case I've been waiting for...always a favorite.
Absolutely loved mine for my previous phone. Best TPU cases imo. Looking forward to seeing your pics.
I'll probably pick one up even though I might opt for a more protective case this time around.
|> transmitted from deep inside a Verizon Note 4 <|
nateinva said:
Does it have an elongated mic opening for Verizon users? This is the case I've been waiting for...always a favorite.
Click to expand...
Click to collapse
THIS i need to know whether or not to buy lol
nateinva said:
Does it have an elongated mic opening for Verizon users? This is the case I've been waiting for...always a favorite.
Click to expand...
Click to collapse
oneandroidnut said:
THIS i need to know whether or not to buy lol
Click to expand...
Click to collapse
Yes, my apologies - I thought I had called that out but must have lost it when editing. The Diztronic Matte TPU DOES have a slot shaped opening which supports Verizon Note 4. My Verizon Note 4 is shown in the pics I've added above.
Ducaticorse said:
Yes, my apologies - I thought I had called that out but must have lost it when editing. The Diztronic Matte TPU DOES have a slot shaped opening which supports Verizon Note 4. My Verizon Note 4 is shown in the pics I've added above.
Click to expand...
Click to collapse
alright cool thanks im ordering one!!
I have updated the original post with pics and confirmation regarding the mic opening and the VZ Note 4. I realized I mentioned this in another case thread but originally failed to include it here.
Ducaticorse said:
I have updated the original post with pics and confirmation regarding the mic opening and the VZ Note 4. I realized I mentioned this in another case thread but originally failed to include it here.
Click to expand...
Click to collapse
Thanks for the update! I just ordered one. I've had a Diztronic case for my last 3 phones and have been happy with all of them. I'm sure this one will be no different.
thanks for the review! i've always been iffy with diztronic, yet i seem to get one per each phone i have just to have one lol..
out of all the TPU's i use, they're always the most bulky which i dislike, because i like them thin..but there's NO good note 4 tpu's out there whatsoever. i'm currently using a clear S line TPU, which is good and all, but the mic holes don't line up perfect, and it doesn't fit as well as it could..plus it's clear, and we all know clear starts looking like crap after a few weeks. i've gotten like 4 other TPU's and shell cases and I hate all of them.
diztronic is nice because they do a lip around the camera, which NO tpu's are doing right now, which means your camera is pretty much flush against the surface which i hate...and they also have two little bumps by the speaker to elevate the speaker off the table so it's not muffled! FINALLY, a TPU maker with some sense knocked into em!
either way, i ordered the gunmetal gray because every diztronic i ever got was always black, so i'm looking for a nice change. ordered today, they say those ship out tomorrow the 26th, so maybe I'll get it by saturday or monday with thanksgiving coming up and all. this will be like my 6th or 7th case already for the Note and I've only been using 1 lol
Does it fit with the OEM Qi back?
jayochs said:
out of all the TPU's i use, they're always the most bulky which i dislike, because i like them thin..but there's NO good note 4 tpu's out there whatsoever. i'm currently using a clear S line TPU, which is good and all, but the mic holes don't line up perfect, and it doesn't fit as well as it could..plus it's clear, and we all know clear starts looking like crap after a few weeks. i've gotten like 4 other TPU's and shell cases and I hate all of them.
Click to expand...
Click to collapse
I don't find the Diztronic bulky at all. The Diztronic for the Note3 was very rounded feeling, where the Note 4 Diztronic is more squared off and edgy, just like the Note 4 itself. I think you'll like it and the holes line up nicely as pictured above.
Flame Red said:
Does it fit with the OEM Qi back?
Click to expand...
Click to collapse
As noted in my review, I do not believe it would fit with the OEM back. I say this because it fits relatively snug as-is with the stock back or stock back + thin Qi receiver. But I don't have an OEM Qi back to try it with.
My black one is scheduled to deliver on Saturday. I will post my thoughts at that time. Not like anyone cares.
WizeGuyDezignz said:
My black one is scheduled to deliver on Saturday. I will post my thoughts at that time. Not like anyone cares.
Click to expand...
Click to collapse
oh hey lagbuddy lol saw you randomly around here, glad to see you're still stalking me and getting every device i get haha
but yeah, my gunmetal gray one is coming saturday! you know what's sad? this one wasn't even out, it was a pre-order, and i'm STILL getting it quicker than this nillkin bumper case i ordered on ebay from Nov 11th. it's from china, yet it's still not here yet. other chinese orders i've gotten took a week, maybe 1.5 weeks. it's over 2 weeks now for this stupid thing and i doubt i'll see it before the diztronic lol
jayochs said:
oh hey lagbuddy lol saw you randomly around here, glad to see you're still stalking me and getting every device i get haha
but yeah, my gunmetal gray one is coming saturday! you know what's sad? this one wasn't even out, it was a pre-order, and i'm STILL getting it quicker than this nillkin bumper case i ordered on ebay from Nov 11th. it's from china, yet it's still not here yet. other chinese orders i've gotten took a week, maybe 1.5 weeks. it's over 2 weeks now for this stupid thing and i doubt i'll see it before the diztronic lol
Click to expand...
Click to collapse
Haha, what's up brother? I really liked my diztronic on my laggy as hell S4.
So I'm hoping to like this one as well. Good luck bro!
Diztronic makes the best TPU cases as far as I'm concerned. I was disappointed when they had to delay the release due to the Verizon mic hole revelation, and ended up going with a UAG case, but anybody looking for a great case for under 10 bucks, this is what you want. I might even pick one up for myself, just in case.
Diztronic is awesome. I had their case on my Note 3, LG G3, and now I'm waiting for the Note 4 case that supports the OEM wireless charging back. They made one for the S5, I really hope they make one for the Note 4!
I ordered mine today. It is only 12 Euro, together with shipping to Ireland, directly from manufacturer's page.
Already have Spigen Capsule and it is great, but flat buttons and flat speaker hole are not perfect for me. Diztronic seems to meet all my requirements. Hope it will appear to be true
Uploaded some extra pics to imgur.
Black Diztronic Note 4
il buono said:
Uploaded some extra pics to imgur.
Black Diztronic Note 4
Click to expand...
Click to collapse
looks good!
Sent from my Samsung Galaxy Note 4 using Tapatalk.
I forgot to post yesterday, but I got my black Diztronic yesterday, a day earlier than estimated. It is the best case I've tried so far, although I haven't tried a lot yet.
The fit is perfect, not too loose or too tight. It adds almost no bulk which I really like. The matte black is awesome and feels great in the hand. Not super grippy, but it will do the job. All of the cutouts are perfect. The camera has enough raise that the lens won't touch a flat surface and the charger fits in without the case interfering. The buttons are also very easy to press, no problems there. In fact, the buttons are easier to press with this case on than without it.
The only thing I noticed is that in a couple areas, the frame moves pretty easily if you pull on it. Especially near the charging port. It doesn't sag at all which is great, but I just wonder if it will become an issue over time. Possibly not but that's the only small thing I've noticed so far.
Other than that, this case is fantastic and blows away any Spigen that makes your phone uneccesarily bulky and for less money.
I do also have an official Samsung protective case coming that is supposed to ship next week. I've heard that's also an amazing case, so I will compare once I get that.
I didn't take any pics of my Diztronic since so many great pics have already been posted. But let me know if you would like to see any.
Related
I love the design of this phone so I want the slimmest possible case I can find. Can anyone recommend a very slim case?
same as you, didn't really want to cover it up too much since the design is so nice. I went with this and I think it will be a good match. I have the white phone so I ordered the white case:
http://www.obostore.com/nillkin-ultra-slim-hard-shield-faceplate-for-htc-one-x-p-5711.html
lots of folks recommended this one http://www.amazon.com/gp/product/B007X4XS3C/ref=oh_details_o00_s00_i00
I ordered it and it will be here Tuesday
You could get the official ones by HTC. They take minimalism to a whole new level bit the downside is its so expensive for a flimy piece of plastic. Or the feather cases by Incipio.
Sent from my HTC One X using XDA
i ordered the black & gray ROCK cases and the case mate barely there case. the ROCK cases look nice but are definitely made for the International X. although they fit the One XL, the camera opening is about1-2 mm lower at the top. not a big issue for me at all. however, the case-mate fits perfectly and looks best! i like how the sides are angled for a perfect fit, e.g., fits the One XL's angled sides like a glove. the obvious downside is the limited protection, e.g., exposed top and bottom.
i sold both ROCK cases to a friend who has the International X and kept the case-mate. i added a couple of pics that (hopefully) show how slim and form-fitting the case-mate case is...
im going with the amzer tpu luxe arigle case had it with captivate and like it and did its job and looks good
lucidlyseen said:
same as you, didn't really want to cover it up too much since the design is so nice. I went with this and I think it will be a good match. I have the white phone so I ordered the white case:
http://www.obostore.com/nillkin-ultra-slim-hard-shield-faceplate-for-htc-one-x-p-5711.html
Click to expand...
Click to collapse
Has anyone gotten one of these yet? Looks nice, I like the texture on the back. I've never heard of this site, reputable?
I got this Speck case from the AT&T store when I bought my phone. I hated it in 2 days. It's way too thick, makes the phone huge and heavy.
http://forum.xda-developers.com/showthread.php?t=1653829
I haven't gotten it yet, but I did get a shipment email the next day, so it looks like they are on the ball. I'll post impressions when I get it, should be in a few days...
Valitri said:
Has anyone gotten one of these yet? Looks nice, I like the texture on the back. I've never heard of this site, reputable?
I got this Speck case from the AT&T store when I bought my phone. I hated it in 2 days. It's way too thick, makes the phone huge and heavy.
http://forum.xda-developers.com/showthread.php?t=1653829
Click to expand...
Click to collapse
dylando808 said:
You could get the official ones by HTC. They take minimalism to a whole new level bit the downside is its so expensive for a flimy piece of plastic. Or the feather cases by Incipio.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
I liked the case for the whole 5 seconds it lasted me
Funny part is that I was planning on spray painting it black cos that case only comes in orange/blue. And while i was taking the case off it snapped on me. Good thing is AT&T warranties out accessories for a whole year. I have a feeling im going to be using that warranty a lot.
You get what you ask for looking for a slim case. They don't offer any protection at all. Which for me is fine. I just don't like how hot the phone gets without a case. I ended up getting the full body zagg.
chivamex10 said:
I liked the case for the whole 5 seconds it lasted me
.
Click to expand...
Click to collapse
i broke my orange version of this case too. if you like to swap out cases every other day (like me) this case may not be for you because you will eventually break it, no doubt about it. i've been luckier with my blue case as it hasn't snapped on me yet.
Just ordered an Amzer Shellster case found here:
http://www.amazon.com/Amzer-AMZ9380...PA1Y/ref=sr_1_1?ie=UTF8&qid=1338902558&sr=8-1
It's not the most "minimalist" case out there but it seems sturdy enough for repeated application and removal (which is important to me since I use multiple cases). It also comes with a holster, which most slim cases do not. It also looks like it offers great protection for the camera.
http://www.youtube.com/watch?v=kMdD2Q35_XA
I'll put up some pics and do a "mini-review" if anyone is interested.
So the case-mate barely there doesn't specify on amazon whether its for the international or att version. However I have heard that it fits ours just fine. Can anyone verify?
And also does it come with a screen protector?
Sent from my HTC One X using XDA
Received my Amzer Shellster yesterday. I can confirm that it fits the AT&T version of the HOX.
Pros
Accurate Fit
Cutouts line up perfectly
Protects camera
Front lip keeps screen from touching when face down
Comes with a holster
Cons
Minamilistic case means it provides less protection than traditional cases
Does not cover top and bottom
Soft touch finish can be a little slippery
While the holster uses "pressure" to hold the phone it does not have an actual mechanism to secure it
Overall, the case is really nice for what it's meant to do. It is advertised as a slim case and it provides all the protection that it entails.
I have included some pics in the attachments showing the cutouts and fit, as well as the holster and front lip.
I got the case mate barely there. Overall I really like it, I wish it was a little thicker because the camera still sticks out a little.
http://www.amazon.com/Case-Mate-CM0...=wireless&ie=UTF8&qid=1339078007&sr=1-1-spell
Essien said:
I got the case mate barely there. Overall I really like it, I wish it was a little thicker because the camera still sticks out a little.
http://www.amazon.com/Case-Mate-CM0...=wireless&ie=UTF8&qid=1339078007&sr=1-1-spell
Click to expand...
Click to collapse
Purchased this as well. Very small and seems to do the trick. I wish it had a stand though.
I recommend the cruzerlite. Only $10
Sent from my HTC One X using Tapatalk 2
I found something that will look sleek for my new phone. I was looking into cases, and this Ultra Thin just caught my attention. Placed in my order from Cretouch store. The price is decent and they offer free shipping too!
ravegrace23 said:
I found something that will look sleek for my new phone. I was looking into cases, and this Ultra Thin just caught my attention. Placed in my order from Cretouch store. The price is decent and they offer free shipping too!
Click to expand...
Click to collapse
Are you talking about this?
http://www.spigen.com/cell-phone/htc/one-x/htc-one-x-ultra-thin-air-series.html
"Will the Ultra Thin Air fit the AT&T version of the HTC One X?
We don't recommend the Ultra Thin Air with the AT&T version as this case was originally designed for the international version. The AT&T version of the phone is slightly longer. While the case my be compatible, it may not be a perfect fit."
live4nyy said:
Received my Amzer Shellster yesterday. I can confirm that it fits the AT&T version of the HOX.
Pros
Accurate Fit
Cutouts line up perfectly
Protects camera
Front lip keeps screen from touching when face down
Comes with a holster
Cons
Minamilistic case means it provides less protection than traditional cases
Does not cover top and bottom
Soft touch finish can be a little slippery
While the holster uses "pressure" to hold the phone it does not have an actual mechanism to secure it
Overall, the case is really nice for what it's meant to do. It is advertised as a slim case and it provides all the protection that it entails.
I have included some pics in the attachments showing the cutouts and fit, as well as the holster and front lip.
Click to expand...
Click to collapse
Thanks for the pics and review. How long did shipping take? Your review should have its own thread, those photos and review is great.
Plus was it really only $14.99?
http://www.amzer.com/Amzer-Shellster-Black-P93808.htm
nuprotocol said:
Thanks for the pics and review. How long did shipping take? Your review should have its own thread, those photos and review is great.
Plus was it really only $14.99?
http://www.amzer.com/Amzer-Shellster-Black-P93808.htm
Click to expand...
Click to collapse
You're welcome . Shipping was pretty fast, I bought the one that is "sold and shipped" by Amazon. And yeah, I got it for $14.99.
So my flat black tpu case by Diztronic came today and let me tell you it is hands down better than anything out there and I could not be more pleased. I am comparing this to the Rearth slim case I was using and before that I also had the Ebay S line case for a couple days and while that case is also tpu, it is truly ghetto compared to this Diztronic. The fit is perfect and while buttons are covered there is still little effort needed to push them unlike many tpu cases. The feel of the case on the phone is also on the premium side and the matte black back does not attract fingerprints either. The other great feature about this case is the slightly raised lip going around the screen which is just right for anyone wanting to play music/put their phone face down. All of this is had with virtually no added bulk either. I highly recommend this case and know you will be happy with it.
myorks1127 said:
So my flat black tpu case by Diztronic came today and let me tell you it is hands down better than anything out there and I could not be more pleased. I am comparing this to the Rearth slim case I was using and before that I also had the Ebay S line case for a couple days and while that case is also tpu, it is truly ghetto compared to this Diztronic. The fit is perfect and while buttons are covered there is still little effort needed to push them unlike many tpu cases. The feel of the case on the phone is also on the premium side and the matte black back does not attract fingerprints either. The other great feature about this case is the slightly raised lip going around the screen which is just right for anyone wanting to play music/put their phone face down. All of this is had with virtually no added bulk either. I highly recommend this case and know you will be happy with it.
Click to expand...
Click to collapse
Pics?
There are pics on the website that are sufficient
those does not look good . Could you post pics of your N4 with that case?
myorks1127 said:
There are pics on the website that are sufficient
Click to expand...
Click to collapse
Um... well sure. But, part of the appeal of any product "review" is to see how it functions in the field--so to speak.
Here
myorks1127 said:
Here
Click to expand...
Click to collapse
It definitely looks better than the "S" TPU case, but does it offer more protection in your opinion.
It seems from your pics the lips on the front are higher than the ones on the "S"?
How good is the fit? would you say it's tight? Does the case come off easily?
Looks good, might still purchase this, although it looks exactly the same as the I-Blason case I have on my N4 already.
Hows the call quality? People complained about the official N4 bumper ruining the microphone quality so I'm wondering if it happens with this too.
I have one of these on order myself.
Would you say the Diztronic is significantly better than the Ringke Rearth Slim case? I've got the Ringke case and it doesn't fit as tight as it could around the volume rocker, too much play for my liking. Also my girlfriend hates how the four corners stick up a little from the screen (to protect the screen if its face down) she says they poke her in the ear on phone calls... Wish I had bought two of the Diztronic cases now
OverTheBelow said:
Hows the call quality? People complained about the official N4 bumper ruining the microphone quality so I'm wondering if it happens with this too.
I have one of these on order myself.
Click to expand...
Click to collapse
+1
I don't have a case at all and I have to position the phone in a certain position on my face for anyone to hear me as it is. If a case or bumper further negates from the call quality I am going to have to pass. Even though I already ordered this and it should be here soon.
1. The call quality is not affected I already had two calls with the case on and it sounds great.
2. The lip is raised a bit more than the S case but not overly done, it will not bother you at all
3. This case feels very good on the phone, it is easy to get off it your actually trying to take it off other that that there is no annoying flex from the tpu or anything like the cheap ones (S case)
4. This is much better that the rearth slim because having this on gives me the feeling of better protecting just by how it feels in the hand and protects the entire bezel which a slim case does not do.
I may order the Diztronic shell case when that come out next week too
I think the stock bumper is stupid anyways
Haven't tried any other case for the nexus 4.but this diztronic case is easily the highest quality tpu I've ever used... Feels great. Love it.
Sent from my Nexus 4 using xda premium
djkinetic said:
Looks good, might still purchase this, although it looks exactly the same as the I-Blason case I have on my N4 already.
Click to expand...
Click to collapse
it's definitely not the same as the i-blason case. I have two i-blason and the diztronic. the diztronic is sooo much better. i used to use their case on my gnex. very good quality.
Got my case yesterday. It fits nicely, has a good feel and looks pretty good too. Doesn't really add much bulk. The seams on 2 corners on the other hand seem a bit shoddy and looks like it might peel away over time. Curious to know if anyone else's case is like that too. Will contact Diztronic and see what they say.
I'm debating whether I should purchase this case in black or the smoke color
Sent from my Nexus 4 using xda premium
Just received mine as well, and YES THIS IS THE BEST CASE OUT THERE FOR THE N4 IMO
in every aspect, design, feel, protection this case is definitely the best, glad I bought this case.
Just got one. Great looking case and real nice feel. My XtremeGuard screen protector peels a bit on the corners. Any suggestions on screen protectors that wouldn't have this issue?
FatalityBoyZahy said:
I'm debating whether I should purchase this case in black or the smoke color
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I would get the black one, I also thought about the smoke color since it allows you to see the nexus logo on the back which is pretty attractive. But the Distronic logo kinda overlayed the LG logo and that's a no-no for me. But since Distronic has a no-hassle free return policy, you can always return it if you're not satisfied with your purchase.
Hello all,
I've always only had the Otterbox Commuter as my one and only case for phones, and with them being so slow to get out the color I want for the S4, I was wondering if I should keep waiting for a bit longer or go with another choice like the Incipio DualPro or Seidio Active. I don't have any experience with either of them, so I'm wondering if anyone who has used them can shed some light (both good and bad) on them.
Thanks.
facetubespam said:
Hello all,
I've always only had the Otterbox Commuter as my one and only case for phones, and with them being so slow to get out the color I want for the S4, I was wondering if I should keep waiting for a bit longer or go with another choice like the Incipio DualPro or Seidio Active. I don't have any experience with either of them, so I'm wondering if anyone who has used them can shed some light (both good and bad) on them.
Thanks.
Click to expand...
Click to collapse
Incipio Dual Pro is horrible. Fitment is off and constantly slips on an end, exposing the screen with no lip coverage. Luckily it was free from the ATT store for me, but i wish i chose a different case from them. I ended up ordering a minimalist JL case from amazon anyway.
I have an Incipio case and I think it's great. Probably the best case I've had for a phone. Only like $25 too.
its_dale said:
Incipio Dual Pro is horrible. Fitment is off and constantly slips on an end, exposing the screen with no lip coverage. Luckily it was free from the ATT store for me, but i wish i chose a different case from them. I ended up ordering a minimalist JL case from amazon anyway.
Click to expand...
Click to collapse
Hmm I've been reading up on it for the S4 and.....that's the first I've heard of it. Will look into it more. Got pictures of it?
itslinx said:
I have an Incipio case and I think it's great. Probably the best case I've had for a phone. Only like $25 too.
Click to expand...
Click to collapse
It's $16 on Amazon right now :good:
no pics sorry, its sitting at home
Consider having a look see at the Casemate Toughcase if you like the otterbox, its actually less bulky while providing better protection for the phone. I'm very surprised this case doesn't see more play here becuase its a truly good case and I get people asking my out of the blue what it is and where I purchased it. I've got probably a dozen friends on it now and I did nothing to convince them, they mauled and pawed at the case for a few and were sold. If you are of a mind you can quickly pull up a few reviews on youtube of the case.
I've been using the Seidio Active case for a few days now. I used a 10% off coupon I found searching Google and it came out to $31 shipped. I bought the one with the grooves for your fingers. Also has a kickstand. I pull out the kickstand when holding the phone and put my ring finger under the kickstand so I have a good hold of the phone and my thumb can reach more of the screen. Kickstand also comes in handy with the smart stay option so the screen won't turn off when I'm reading. It is easy to take on and off so I can get to the battery easily. All the proper cut outs are there and are lined up perfectly. Complaints - When typing or pushing the menu / back key my fat fingers will hit the edge of the case. I just have to work on using the tip of my thumb. Depending on the angle of the phone you may not be able to see the notification light. There are covers for the volume and power button which took some getting used to but I can now hit them without looking.
krabman said:
Consider having a look see at the Casemate Toughcase if you like the otterbox, its actually less bulky while providing better protection for the phone. I'm very surprised this case doesn't see more play here becuase its a truly good case and I get people asking my out of the blue what it is and where I purchased it. I've got probably a dozen friends on it now and I did nothing to convince them, they mauled and pawed at the case for a few and were sold. If you are of a mind you can quickly pull up a few reviews on youtube of the case.
Click to expand...
Click to collapse
How well does that case work with a glass screen protector?
Sent from my SPH-D710 using xda app-developers app
I have the Incipio Dual Pro Carbon now as my temporary case. The rubber is constantly coming off from around the lip. You see the silver when this happens. Not a huge deal but in a drop it won't be that good. Also the silicone grabs a little bit of lint.
Seidio active... I have it on my Nexus 7 and had it on my Note 1.... Huge lint magnet, OLD OLD design, silicone can be warped and won't lay flat in some areas.
Otterbox Commuter.... I will order one of the colored models when available. Buttons were terrible on the S3 but it seems to have an improved design....Putting the case on seems to be better than the S3... Overalll good design.
I also ordered the Cygnett Workmate... It seems to cover the issues from the other case and offers better grip... I will know in a couple of weeks.
Ttrain721 said:
How well does that case work with a glass screen protector?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
The edges of the case do come over the top of the device to the screen side but this is only the softer inner portion of the case and I'm thinking it would work fine but I do not use screen protectors so I'm not certain. You can see it pretty clearly in some of the youtube videos of the case so you should be able to make a call from that. A link is here ---> http://www.youtube.com/watch?v=7l3X7Oxgx5I and the same fellow reviews several others which might catch your interest as well.
I've included a couple pictures that show something you cant see there. The one is of my year old S3 case next to my brand new S4 case. Notice how the thing still looks new? The other seems like kind of an oddball picture but what you are looking at is the largest portion of the soft inner case and the thing to notice there is the lack of lint. While these do catch a tiny bit of lint it is very little as you can see there. I did not clean the case up, it went from my pocket to the drawer after my S4 got here.
On my S3 I have had my phone in that case directly alongside a friend who had his in a commuter case and we both agreed that this case felt better in the hand and it had a more premium feel. It also has better grip but does not hang in the pocket. He in fact is one of the people I know who ditched his case and got the Casemate instead. Now I've obviously not seen the Otterbox for the S4 yet but it appears much like the Casemate counterpart to be pretty much a rehash and I would expect that they will compare similarly again.
facetubespam said:
Hmm I've been reading up on it for the S4 and.....that's the first I've heard of it. Will look into it more. Got pictures of it?
It's $16 on Amazon right now :good:
Click to expand...
Click to collapse
I bought mine (Dual Pro) at a TMob store. I totally disgaree regarding overlapping screen. It TOTALLY protects the screen via it's superb fit overlapping. Plus it has a nice "feel just holding it'. Used to have a Body Glovefor my S3. The bodyglove was on the thick side and it just didn't have the same tactile feeling when holding the phone. Mine is black with Grey...IOW two tone. Only saw it in a TMob store. Solid colors online from this link.
http://store.androidcommunity.com/incipio-dualpro-hard-shell-case-with-silicone-core/4A225A14120.htm
krabman said:
The edges of the case do come over the top of the device to the screen side but this is only the softer inner portion of the case and I'm thinking it would work fine but I do not use screen protectors so I'm not certain. You can see it pretty clearly in some of the youtube videos of the case so you should be able to make a call from that. A link is here ---> http://www.youtube.com/watch?v=7l3X7Oxgx5I and the same fellow reviews several others which might catch your interest as well.
I've included a couple pictures that show something you cant see there. The one is of my year old S3 case next to my brand new S4 case. Notice how the thing still looks new? The other seems like kind of an oddball picture but what you are looking at is the largest portion of the soft inner case and the thing to notice there is the lack of lint. While these do catch a tiny bit of lint it is very little as you can see there. I did not clean the case up, it went from my pocket to the drawer after my S4 got here.
On my S3 I have had my phone in that case directly alongside a friend who had his in a commuter case and we both agreed that this case felt better in the hand and it had a more premium feel. It also has better grip but does not hang in the pocket. He in fact is one of the people I know who ditched his case and got the Casemate instead. Now I've obviously not seen the Otterbox for the S4 yet but it appears much like the Casemate counterpart to be pretty much a rehash and I would expect that they will compare similarly again.
Click to expand...
Click to collapse
Man, that is some kind of funky back they have there. How does it feel? What is it?
And you said that Casemate offers better protection than the Commuter, any links to vids/proof to this? Cause if that's true, then that's a great deal. It looks like it is as bulky as the DualPro. Lastly, how are the colors with the Casemate? Got sick of all black, and that's why I've been looking elsewhere while waiting for the Commuter colors. Thanks.
Incipio DualPro
I purchased my Incipio DualPro from an AT&T store ($35 + tax) just to have something to protect the phone while I figure out what I really want as far as a case. I went in to get the cheapest thing they had but really liked the look of the fake carbon fiber which looks even better in person. But, the silicone layer is so loose and floppy that even with the stiff Plextonium frame:laugh:, it won't hold its shape leaving the bezel exposed where the fancy named frame isn't. This case had the makings of a winner.
Love this look:
Hate this:
Returned to AT&T store today!
The outer shell is plastic. It has the appearence of the knurling you see on a ratchet handle for example. In person it looks good and has a better feel than that of the Otterbox counterpart. The bulk of the case is about the same as the commuter, it is designed for protection and those who would avoid the Otterbox commuter for that reason would want to avoid it as well. That said it is slighly less bulky than its commuter counterpart because it is thinner.
As to protection there are no sure proofs, no 1000 phones dropped and here is the absolute numbers, test. You have to look at the case and make a judgement. The casemate clearly covers the corners better and has a better fit which combined with what are visibly better materials means you can pretty much figure your phone has a better chance than it does in the commuter. There is no sure thing. I had my S2 and then S3 both in the same case for those phones and while I haven't dropped the S4 yet I did have occasion to drop both of those several times and neither suffered a scratch although again no case will protect against bad luck.
In regards to the colors, I've no idea. I always go black so have never looked. Best bet might be to check the case out in a store. Its popular enough that I noticed our AT&T shop here had some on the shelf for S3s. Or if you have a case kiosk at the mall they will likely have one and you can check out the material yourself. Casemate has many other cases but I have no experience with them. I was Otterbox all the way till I ran into the toughcase which just plain out commuters the commuter at its own game. IMO
Looking at the dimensions of all the products, it looks like Casemate is the bulkiest, with Otterbox second, and Incipio DualPro the least bulkiest.
The one thing I'm not a fan of the Casemate from the pictures is that there seems to be more open exposed areas, especially at the top.
I ordered the Dual Pro case and have been waiting for it to come in.... I bought the Body Glove Dimensions case from the T-Mobile store just to have something on it until the Dual Pro case came in...The Dual Pro case looked really nice in the store but I want the white and gray one that they didn't have.. Now I'm hearing all the crappy reviews about the Dual Pro case and I'm having buyers remorse...Maybe I will get one from a good batch that will fit like a glove...UNLIKELY!!!! Anyway the Body Glove Dimensions case feels really good in my hand and looks nice however it doesn't protect anything just nice and slim.
facetubespam said:
Looking at the dimensions of all the products, it looks like Casemate is the bulkiest, with Otterbox second, and Incipio DualPro the least bulkiest.
The one thing I'm not a fan of the Casemate from the pictures is that there seems to be more open exposed areas, especially at the top.
Click to expand...
Click to collapse
Im not sure where you are getting your dimensions from but I can tell you from actually having both in my hand with the S3 the toughcase is slimmer. Since it appears that the Commuter is a reboot with a few minor changes just as the toughcase is for S4 I'm pretty sure you are going to see the same thing again. Also the only openings on the tough case are where the IR and headphone jacks are and the same applies on the bottom where there is no opening other than the two ports there. The Otterbox possesses exactly the same openings in their case and then unlike the otterbox the casemate piece does not have the wide open corners which are the single most likely spot for the phone to hit in a drop.
lol Sometimes you just cant let a favorite go, I do it myself. Either way you're getting a good case that stands a real chance of saving your overpriced ludicrously profitable for Samsung device so its all good. :good:
prototype.77 said:
I ordered the Dual Pro case and have been waiting for it to come in.... I bought the Body Glove Dimensions case from the T-Mobile store just to have something on it until the Dual Pro case came in...The Dual Pro case looked really nice in the store but I want the white and gray one that they didn't have.. Now I'm hearing all the crappy reviews about the Dual Pro case and I'm having buyers remorse...Maybe I will get one from a good batch that will fit like a glove...UNLIKELY!!!! Anyway the Body Glove Dimensions case feels really good in my hand and looks nice however it doesn't protect anything just nice and slim.
Click to expand...
Click to collapse
You do have to remember that those that have problems are usually the ones that take to online to complain, so just take all the amount of bad stuff with a grain of salt.
krabman said:
Im not sure where you are getting your dimensions from but I can tell you from actually having both in my hand with the S3 the toughcase is slimmer. Since it appears that the Commuter is a reboot with a few minor changes just as the toughcase is for S4 I'm pretty sure you are going to see the same thing again. Also the only openings on the tough case are where the IR and headphone jacks are and the same applies on the bottom where there is no opening other than the two ports there. The Otterbox possesses exactly the same openings in their case and then unlike the otterbox the casemate piece does not have the wide open corners which are the single most likely spot for the phone to hit in a drop.
lol Sometimes you just cant let a favorite go, I do it myself. Either way you're getting a good case that stands a real chance of saving your overpriced ludicrously profitable for Samsung device so its all good. :good:
Click to expand...
Click to collapse
:silly: I think on the corners, they both go about it differently, Otterbox has the silicone there, and casemate has both, with the plastic outside. Bet they both have their own science reasons for doing it that way lol.
I'll wait it out a little while longer before deciding. I think my biggest concern about the casemate is that I won't like how the textured back feels.
JawjaBill said:
I purchased my Incipio DualPro from an AT&T store ($35 + tax) just to have something to protect the phone while I figure out what I really want as far as a case. I went in to get the cheapest thing they had but really liked the look of the fake carbon fiber which looks even better in person. But, the silicone layer is so loose and floppy that even with the stiff Plextonium frame:laugh:, it won't hold its shape leaving the bezel exposed where the fancy named frame isn't. This case had the makings of a winner.
Love this look:
Hate this:
Returned to AT&T store today!
Click to expand...
Click to collapse
Mine does exactly this.
I just saw that UAG (urban armor gear) is going to start shipping their cases soon.... might have to look into them now :/
Never had a one piece polycarbonate silicone case before.
A while ago I saw my friends case on her S4. It was the UAG case in an orange/grey color combo. She's had it a couple of months. It looked pretty cool, so iI asked her how she likes it.
Her response was that she likes it a lot.
I then asked her if she's ever dropped her S4. Her response was:
"Oh yeah, I drop it all the time."
That's exactly what I like to hear when determining whether I want to give a particular case a go
I liked the look of her case, but didn't know how it would hold up to drops regarding protecting the S4. I had been using a Cygnett WorkMate Evolution case for a month or so. I like it, but the UAG is a slimmer and better looking case, but I was unsure if it would protect my S4.
Well, I had my answer, as she 'drops it all the time," and her S4 is intact.
I purchased the UAG in black yesterday from Amazon and just received it today.
Here's my opinion so far:
- really nice looking case, minimalistic, yet protective
- fits the S4 perfectly. Snug as a bug in a rug, as they say
- generous usb and earphone plug ports
- volume and power buttons have an excellent/responsive/clickie feel to them.
- nice lip for screen facedown protection
- corner protective bumpers incorporate into the layout and total look of the case very well
- has a very nice feel in hand. Imo, can use a little grippier feel, but as I've only just received this case a few hours ago, I'll give it some time. I'm coming from the Cygnett WorkMate Evolution case, which is bulkier and grippier, so as I said, I'll know better in a couple of days regarding whether the not as grippy feel will be a factor.
- while the metallic UAG branding on the back of the case is of high quality, I'd rather have it blackened instead of the matt metallic it is now. I pay enough money for the case that I don't have to be a walking billboard for the UAG Company. I'll wait a bit, but I may dye the matt metallic to a darker color. Maybe not.....
- the UAG has now replaced my Cygnett as my EDC....
- protects my friend's S4 after 'dropping it all the time.'
After purchasing the UAG, and prior to receiving it today, I watched the linked video below, which also confirmed the protection of this case.
I also linked to Amazon, which shows the available colors.
UAG S4 case:
Amazon - $30.53
http://www.amazon.com/URBAN-ARMOR-S...UTF8&qid=1379635729&sr=8-10&keywords=uag+case
UAG S4 YouTube video review & drop test:
http://www.youtube.com/watch?v=LIIVSycKL3w
I have one of these also. I had had it on the s3 previously and was very impressed. I got the rust orange colour.
This would be the first case I would look for when I get a new phone.
Sent from my GT-I9505 using Tapatalk 4
Too massive as for me.
No problem with my UAG case. Works and fits perfectly.
Sent from my GT-I9505 using XDA Premium 4 mobile app
pardoned said:
I have one of these also. I had had it on the s3 previously and was very impressed. I got the rust orange colour.
This would be the first case I would look for when I get a new phone.
Sent from my GT-I9505 using Tapatalk 4
Click to expand...
Click to collapse
The orange case is nice look'n.
I'd like to see a dark blue/black case available.
Vurda said:
Too massive as for me.
Click to expand...
Click to collapse
Probably one of the top minimal cases you'll get that still offers adequate protection.
elboaman said:
No problem with my UAG case. Works and fits perfectly.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So far, so good here :good:
Just got this after my neo hybrid broke.
Best. Case. Ever
Sent from my SCH-I545 using Tapatalk 4
I had the SPG Hybrid Neo a couple of months ago which I returned after 2 days.
It doesn't compare to the UAG in terms of build quality, protectiveness and looks (subjective) imo
Biker1 said:
I had the SPG Hybrid Neo a couple of months ago which I returned after 2 days.
It doesn't compare to the UAG in terms of build quality, protectiveness and looks (subjective) imo
Click to expand...
Click to collapse
I hated the Neo Hybrid too. I ended up keeping it because I forgot to fill out the return form Ahaha
I have the black UAG (Looks badass with the black s4), the orange (looks cool, I'll admit that, but in person and on your phone it looks a bit obnoxious) and the blue (I havent been using it that much, just love how sleek the black case is)
Actually have a hot pink one for the wifey's iphone 4 ( yes our house is divided haha) thats pretty cool.
I have the OD green for the s3 too and really wish they'd make an s4 version.
JaeKay said:
Just got this after my neo hybrid broke.
Best. Case. Ever
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
I didn't wait for my SGP Neo to break. I just returned it after 2 days. The neoprene was already sagging
Adam0524 said:
I hated the Neo Hybrid too. I ended up keeping it because I forgot to fill out the return form Ahaha
I have the black UAG (Looks badass with the black s4), the orange (looks cool, I'll admit that, but in person and on your phone it looks a bit obnoxious) and the blue (I havent been using it that much, just love how sleek the black case is)
Actually have a hot pink one for the wifey's iphone 4 ( yes our house is divided haha) thats pretty cool.
I have the OD green for the s3 too and really wish they'd make an s4 version.
Click to expand...
Click to collapse
Pink? Hmmm.....
Nah, I'll keep the Black:laugh: (They don't make it for the S4 anyway, unless the Plasma is the equivalent of the Pink)
I almost ordered the Slate/Blue but chose the Black.
The Slate/Blue must be popular, as it's $34.95, and the Black is $29 (price drop from $31.53) on Amazon
Very satisfied with the UAG case:good:
I rock this uag case plus a glas.t works perfect. Fits amazing
Sent from my SCH-I545 using Tapatalk 2
imablackhat said:
I rock this uag case plus a glas.t works perfect. Fits amazing
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
A month or so before getting the UAG case or any case, as I always went caseless, I ordered the glass tR I believe it was. I returned it because I decided to order a caseionly, and take my chances that the screen wouldn't take a direct hit to a corner or an edge of something.
At the time, I decided nottto oder the Slim because I thought it was too thin, and wouldn't protect the screen as well as the thicker protector. This was confirmed by SGP in response to an email I sent.
I think the Slim was .15mm, and the tR was .40mm and the glas t is .25mm without round corners if I remember correctly.
With the above being said, how does the UAG screen lip height and Glas t protector height match up?
I have been reading lots of posts in XDA trying to decide what my case should be. I bought the Incipio dual layer case just to get me by until I did some more research.
All of my other phones have had Seidio active case/ holster combos. They have been really good cases
I have been thinking of trying something different this time
The UAG is on the top of my list
Im in construction so I need to have a case that can withstand my environment. I have dropped my Rezound with the Seido case from about 10' on concrete multiple times and nothing ever happened to it.
Do you guys think it can hold up like the Sedio case does?
I remember seeing someones post in another topic in XDA that the UAG case will fit the Seido holster
Can anyone confirm this?
I also want to get a desktop charger for the phone, Is anyone with a UAG using a desktop charger, if so what charger are you using?
I have seen lots of people talking about screen protection and getting a case that has the front clear protector such as the otterbox. Im not sure why people think that a clear plastic cover would stop the screen from breaking, besides the screen is gorilla glass 3, if that screen takes a hit hard enough to break it, a thin layer of plastic wont make any difference other then to keep all the tiny pieces of glass from flying all over the place
Thanks for any info you guys might have
@Hitch_Itch
I can't answer all of your questions as I've not had experience with the accessories you've asked about, but the following will answer some of your questions:
- I have no doubt that the UAG will not fulfill your requirements for your environment.
- the UAG can survive up to a 6' drop, as per the videos, but I'm not sure if it would be on a consistent basis.
- my opinion would be that you would need a case that offered Full wrap protection such as the model you mentioned, that you dropped from 10' without issue. The UAG wrapped S4 would no doubt suffer massive injuries from that height
- in your environment, there would most likely be drops from even short distances were the S4 would hit an edge, corner, etc., land on its screen which would crack it, as the UAG case does not have a built in full wrap screen protector incorporated into it. As you mention, the screen protector would only protect against scratches.
- no way can the UAG hold up under extreme conditions such as the Seido case can.
This is because the UAG case is not meant to be. It doesn't fall under the Extreme Environment, Full Wrap, Closed Ports Umbrella, so to speak. That is a whole nutha subset of cases for quite different needs/requirements.
- If one is looking for an everyday case with a minimalist footprint, that is lightweight, easily slid into a pocket, offers adequate protection from drops normally encountered during everyday use, and is aesthetically appealing, I highly recommend the UAG. But for Extreme Environment survival, I don't recommend it for the reasons I mentioned earlier.
As is said, the right tool for the right job. Or something like that
While looking at the UAG, I came across many cases. One of theseccases was the Griffin Survivor.
I said to myself if I ever need a case to protect my S4 under the most of Extreme conditions, this is the case I'd take a serious look at and most likely purchase. I'm posting a link to it:
http://store.griffintechnology.com/smartphone/survivor-with-belt-clip-for-samsung-galaxy-s4
Take a look at this specs!
Biker1 said:
@Hitch_Itch
P can't answer all of your questions as I've not had experience with the accessories you've asked about, but the following will answer some of your questions:
- I have no doubt that the UAG will not fulfill your requirements for your environment.
- the UAG can survive up to a 6' drop, as per the videos, but I'm not sure if it would be on a consistent basis.
- my opinion would be that you would need a case that offered Full wrap protection such as the model you mentioned, that you dropped from 10' without issue. The UAG wrapped S4 would no doubt suffer massive injuries from that height
- in your environment, there would most likely be drops from even short distances were the S4 would hit an edge, corner, etc., land on its screen which would crack it, as the UAG case does not have a built in full wrap screen protector incorporated into it. As you mention, the screen protector would only protect against scratches.
- no way can the UAG hold up under extreme conditions such as the Seido case can.
This is because the UAG case is not meant to be. It doesn't fall under the Extreme Environment Full EWrap Closed Port Umbrella, so to speak. That is a whole nutha subset of cases for quite different needs.
While looking at the UAG, I came across many cases. One of theseccases was the Griffin Survivor.
I said to myself if I ever need a case to protect my S4 under the most of Extreme conditions, this is the case I'd take a serious look at and most likely purchase. I'm posting a link to it:
http://store.griffintechnology.com/smartphone/survivor-with-belt-clip-for-samsung-galaxy-s4
Take a look at this specs!
Click to expand...
Click to collapse
I just watched a bunch of video's on drop test for the UAG and in every video the screen cracked at a fall above 5'
Also watched a bunch of videos for the otter box and the Trident case drop tests, both protected the phone and some of the videos were a 50' toss down a set of concrete stairs.
Sounds like the UAG might not be the best case for me.
Thanks for the reply
A great case, I've dropped this phone from several angles between 5 and 6 feet and no problems. It's small and durable.I love it
---------- Post added at 11:33 PM ---------- Previous post was at 11:30 PM ----------
https://www.youtube.com/watch?v=54INmWaPI4Q&feature=youtube_gdata_player
I purchased my brother a uag case of eBay for only$15 shipped it was legit.
Hey I have an extra uag black if anyone is interested shoot me a pm.
sent from my stock me7 galaxy s4
But the price...
Does anybody knows where to buy it cheaper than $20,00?
the original one.
---------- Post added at 02:39 AM ---------- Previous post was at 02:34 AM ----------
stricklerjosh said:
Hey I have an extra uag black if anyone is interested shoot me a pm.
sent from my stock me7 galaxy s4
Click to expand...
Click to collapse
would u send to Brazil??
I have the orange one. Anyone with a white one that they want to trade?
Sent from my GT-I9505G using Tapatalk 4
It's Been a Week
Well, it's been a week since I received my UAG in Black for my S4.
I'll keep this short & sweet, as I posted in detail my observations about this case.
The UAG is definitely a keeper and am impressed with it.
As for the case maybe not being as grippy as I'd like, and I was going to let some time pass to see if it would be an issue, it's no issue at all. The case is not slippery at all, and offerers a good hold.
I haven't dropped the S4 yet, so I can't given you any feedback on drop protection, except what I wrote in my op.
This case is a Winner :good:
Biker1 said:
Well, it's been a week since I received my UAG in Black for my S4.
I'll keep this short & sweet, as I posted in detail my observations about this case.
The UAG is definitely a keeper and am impressed with it.
As for the case maybe not being as grippy as I'd like, and I was going to let some time pass to see if it would be an issue, it's no issue at all. The case is not slippery at all, and offerers a good hold.
I haven't dropped the S4 yet, so I can't given you any feedback on drop protection, except what I wrote in my op.
This case is a Winner :good:
Click to expand...
Click to collapse
Have ever had the Incipio dualpro case?
If so how does the Uag compare to it?
I love the look of this phone, and have always used a case, so I'm interested in your thoughts on clear cases.
I've seen my dad use them and it seems like they can get quite dirty between the phone and the case. I don't know if I'll like the feel of the hard plastic case that you get.
I did also get the cheaper insurance through Verizon that only covers replacement and only $20 glass repair, so I may just go caseless.
Spigen Ultra Hybrid in clear.
I ordered the SunRemex from Amazon with built in screen protector. I don't know if it makes a difference, but only 1 cut out for the front speaker. Not even the camera. . Wonder if it will mess with motion sense.
I would highly recommend the Caseology clear case. It's $10 with the Amazon coupon and I've used this on many past phones but currently have it on my Not Pink 3XL. I'm receiving it today along with my 4XL to make sure and show off the coloring. https://www.amazon.com/gp/product/B07X7JWC3V/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B07Y1S4FXG/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 I used this on my 3XL and it hasn't yellowed and it held up quite well. Very pleased with the purchase and the black would accent the orange quite nicely.
Cdubzz20 said:
I love the look of this phone, and have always used a case, so I'm interested in your thoughts on clear cases.
I've seen my dad use them and it seems like they can get quite dirty between the phone and the case. I don't know if I'll like the feel of the hard plastic case that you get.
I did also get the cheaper insurance through Verizon that only covers replacement and only $20 glass repair, so I may just go caseless.
Click to expand...
Click to collapse
Just picked up this one from Amazon:
https://www.amazon.com/TORRAS-Google-Pixel-Case-Anti-Yellow/dp/B07XY48VW8
Getting it in the mail today. I can share my thoughts once I get it. I usually go caseless and use a pop socket but it won't stick to the back because of the finish. Plus I still want to use wireless charging so I can just remove the case every night. I bought a pop socket mount for my car a few weeks ago so I'd like to continue using that as well.
This one has a built in screen protector that sucks... I snatched it out the case and used a TGSP, now I absolutely love it!
https://www.amazon.com/dp/B07YKGS74G/ref=cm_sw_r_sms_apa_i_mseUDb3JG6829
Sent from my Pixel 4 XL using XDA Labs
I have the Spigen Ultra Hybrid, it's great so far.
Caseology Skyfall. Phone looks more orange than usual because of the warm lighting.
Sent from my Pixel 2 XL using Tapatalk
currently looking at two the ESR Case and the Caseology skyfall. Like the grippyness of the the ESR on the sides. The skyfall is a little bit more bulky and takes a bit of effort to take off after. not sure which one I like more.
ESR is in this thread with coupon codes
https://forum.xda-developers.com/pi...esr-tempered-glass-screen-protectors-t3987939
y2whisper said:
currently looking at two the ESR Case and the Caseology skyfall. Like the grippyness of the the ESR on the sides. The skyfall is a little bit more bulky and takes a bit of effort to take off after. not sure which one I like more.
ESR is in this thread with coupon codes
https://forum.xda-developers.com/pi...esr-tempered-glass-screen-protectors-t3987939
Click to expand...
Click to collapse
The Skyfall is on the bulky side but it does get easier to take off after a few tries. I take it off from the bottom first then peel off the rest easily.
Sent from my Pixel 4 XL using Tapatalk
I can tell you that the ESR Mimic is a great case.
I had ordered the ESR Mimic, the essential zero and the Spigen Liquid Crystal and ultimately kept the Mimic and returned the others.
The Mimic is slim, has the tpu bumper for grippiness and the glass back looks and feels great.
I got it with the above codes and before they raised the price a little so I paid approx. $14, which is a steal.
I know it'll yellow eventually with the tpu bumper, but I'll enjoy it until then. I've already got the google fabric case, which is bulkier but feels and looks great too. And, whenever rhinoshield gets their act together, I'm all over their bumper case.
Have been wanting to see this on a device. Using a fabric case myself, but this will likely be the next.
https://catalystcase.com/products/impact-protection-case-for-google-pixel-4-xl
mrro82 said:
Spigen Ultra Hybrid in clear.
Click to expand...
Click to collapse
best one!!!
Spiegen Liquid Crystal Clear. Looks glorious. Usually go with Rinke Fusion but glad I switched
I have the spigen ultra hybrid and the ESR essentially zero case. Both are great depending upon how much protection you feel comfortable with. While the ESR feels great and fits great, I feel better with the additional thickness of the spigen. But they are both great as far as clear cases go.
Cdubzz20 said:
I love the look of this phone, and have always used a case, so I'm interested in your thoughts on clear cases.
I've seen my dad use them and it seems like they can get quite dirty between the phone and the case. I don't know if I'll like the feel of the hard plastic case that you get.
I did also get the cheaper insurance through Verizon that only covers replacement and only $20 glass repair, so I may just go caseless.
Click to expand...
Click to collapse
ESR mimic case with promo code is the one i purchased and i an very pleased.
See the esr thread in the pixel 4xl accessories sub forum. I loaded a couple pics, thought i had more but were taken with old phone and didn't back up.
Really enjoy the tempered glass case back
razrlover said:
ESR mimic case with promo code is the one i purchased and i an very pleased.
See the esr thread in the pixel 4xl accessories sub forum. I loaded a couple pics, thought i had more but were taken with old phone and didn't back up.
Really enjoy the tempered glass case back
Click to expand...
Click to collapse
Yep. I'm still very much enjoying my esr mimic. Really nice case and as I said above, I also used the discount code.
I just yesterday ordered the Totallee thin case (also with nice discount) in my pursuit for a super slim case. Should have it Monday and I'm thinking I'll like it after reading some reviews. And I'm still waiting for the rhinoshield bumper case.
Sent from my Pixel 4 XL using Tapatalk
blazinazn said:
Just picked up this one from Amazon:
https://www.amazon.com/TORRAS-Google-Pixel-Case-Anti-Yellow/dp/B07XY48VW8
Getting it in the mail today. I can share my thoughts once I get it. I usually go caseless and use a pop socket but it won't stick to the back because of the finish. Plus I still want to use wireless charging so I can just remove the case every night. I bought a pop socket mount for my car a few weeks ago so I'd like to continue using that as well.
Click to expand...
Click to collapse
How's this case working out for you? I've been through a couple of clear cases so far but not completely satisfied yet and came across the TORRAS as well so I'm curious how it actually is.
I have the Spigen liquid crystal on right now, but the excessive branding along the edges is pushing me towards another case and I believe one of the ESR clear cases is the same way. Does the TORRAS have a lot of branding and text along the edges? I don't understand why they put all that on clear cases to begin with.
Lemonade727 said:
How's this case working out for you? I've been through a couple of clear cases so far but not completely satisfied yet and came across the TORRAS as well so I'm curious how it actually is.
I have the Spigen liquid crystal on right now, but the excessive branding along the edges is pushing me towards another case and I believe one of the ESR clear cases is the same way. Does the TORRAS have a lot of branding and text along the edges? I don't understand why they put all that on clear cases to begin with.
Click to expand...
Click to collapse
I'm liking it so far. I remove it every night to charge it wirelessly and it's not a problem. It doesn't add too much bulk and you can still see the design of the phone. There is absolutely no branding on the sides. The edges around the front aren't huge and don't bother me one bit. You can still easily call up the assistant with gestures.
Uploaded a few pics