idk what happen i went to flash a rom an BOOM stuck in the boot menu. i cant odin back to stock as i need a .pit file which i dont have. and when i go into recovery mode and factory reset it just keeps getting stuck.
any help? or is the phone lost?
eyekyu said:
idk what happen i went to flash a rom an BOOM stuck in the boot menu. i cant odin back to stock as i need a .pit file which i dont have. and when i go into recovery mode and factory reset it just keeps getting stuck.
any help? or is the phone lost?
Click to expand...
Click to collapse
Following the steps here should get you back up and running.
http://forum.xda-developers.com/showthread.php?t=3096000
Yes, you don't need a pit file.
brholt6 said:
Following the steps here should get you back up and running.
http://forum.xda-developers.com/showthread.php?t=3096000
Click to expand...
Click to collapse
did NOT work.
im on osx and running a wine version or odin
eyekyu said:
did NOT work.
im on osx and running a wine version or odin
Click to expand...
Click to collapse
Thats a pretty key piece of information you left out. Jodin is an option but I was never able to get it to work on my Mac.
brholt6 said:
Thats a pretty key piece of information you left out. Jodin is an option but I was never able to get it to work on my Mac.
Click to expand...
Click to collapse
what has worked for you? am i gonna need to bootcamp or something.
eyekyu said:
what has worked for you? am i gonna need to bootcamp or something.
Click to expand...
Click to collapse
Using that guide on a windows computer was the only thing that worked for me, unfortunately. I haven't checked the Jodin thread recently but it appeared like the developers were no longer working on it.
I haven't tried bootcamp since I dont have a windows software key, but I would assume that would work. Definitely worth a shot.
had to install VMware, got everything working tho' thanks again @brholt6 for the link
eyekyu said:
had to install VMware, got everything working tho' thanks again @brholt6 for the link
Click to expand...
Click to collapse
Nice. Glad you got it working! If I ever run in to trouble while I'm out on this job site with only my Mac I might have to send you a PM on how you got it done!
Related
hey guys i am new to the forums..i have t mobile galaxy s t959v. and its stuck on bootloop. i have tried ODIN to flash it back to stock firmware but it keeps reeboting on vibrant screen over nad over...help me guys...m going out of my mind. also i tried eugene froyo with no avail cnt get past a boot screen. But i can get into download mode. any help would be appreciated.....:good:
The Guide
Read Learn Profit.
Then thank the guy who spent hours(maybe even days) putting that together.
hechoen said:
The Guide
Read Learn Profit.
Then thank the guy who spent hours(maybe even days) putting that together.
Click to expand...
Click to collapse
i saw the guide earlier and it ddint work for me since i cant boot up the phone and update it with kies mini or anything else. any other solution? m going crazy.
What do you mean you can't boot up? You need to be on download mode, or are you telling me that you can't get into download mode?
If you can't get into download mode then you're out of luck.
nemeancestus said:
i saw the guide earlier and it ddint work for me since i cant boot up the phone and update it with kies mini or anything else. any other solution? m going crazy.
Click to expand...
Click to collapse
OK you said in your OP that you can get into DL mode. Follow the second post of that guide for getting Heimdall One-Click up and running. Then flash heimdall per the directions of the guide. You'll want to flash WITH bootloaders. Just relax and read through it. It will fix your problems.
Before you do anything, uninstall Kies Mini and use usbdeview to uninstall android and samsung drivers. Then proceed with Lumins guide. If you DO NOT UNINSTALL DRIVERS I can assure you there is no way to get out of hard brick unless you have a jig.
Tip: Uninstall drivers that has the name Samsung or Android.
th3controller said:
If you DO NOT UNINSTALL DRIVERS I can assure you there is no way to get out of hard brick unless you have a jig.
Click to expand...
Click to collapse
Actually not true. If you use a different USB port then the one the Kies drivers are linked to Heimdall Drivers will install just fine. I've got Odin, Heimdall, and ADB running for two different phones on my laptop. And this guy is soft bricked not hard bricked.
hechoen said:
Actually not true. If you use a different USB port then the one the Kies drivers are linked to Heimdall Drivers will install just fine. I've got Odin, Heimdall, and ADB running for two different phones on my laptop. And this guy is soft bricked not hard bricked.
Click to expand...
Click to collapse
i followed the second guide and got everything right..but when i click flash i get this error/message? ''Local and device PIT dont match and repartition wasnt specified!
Ending session....
Rebooting device....
what should i do???
nemeancestus said:
i followed the second guide and got everything right..but when i click flash i get this error/message? ''Local and device PIT dont match and repartition wasnt specified!
Ending session....
Rebooting device....
what should i do???
Click to expand...
Click to collapse
You sure you have a t959v? Try a different one click from the collection? New to me.
In his op it says it is bootlooping on the vibrant screen. Quite possibly he actually has a vibrant .
eollie said:
In his op it says it is bootlooping on the vibrant screen. Quite possibly he actually has a vibrant .
Click to expand...
Click to collapse
That's what I'm thinking. Or when he flashed with Odin he flashed vibrant firmware to it? Have you ever seen that error before?
Cant say that I have. It could be I havent ever flashed a rom not for this phone.
AdamOutler says one clicks have a safety that keeps you from flashing the wrong software. That might be what is happening. Maybe the op needs to use heimdall-frontend to flash a tar.gz. /shrug.
nemeancestus are you comfortable using regular heimdall? You can flash the files used in the one click with heimdall-frontend. I will link the tar.gz, download it. In heimdall-frontend the first tab will give you the ability to load a package. Browse to the folder you downloaded it in. It will decompress the tar.gz once that is done in the package files pane it will list the files. Once it does that select load it will take you to the flash tab and load the files for you. Now put your phone in download mode and it should show as connected in heimdall. Dont change any of the options set. Just hit flash. After that it should reboot and you will be on stock plus blastoff kernel. You will need to flash a different rom tho wifi does not work and it doesnt have busy box or su preinstalled. Just reboot to recovery and flash a new rom.
The link might not be active yet give it some time I just put it on drop box.
https://dl.dropbox.com/u/10373328/Stock KJ6 + root.tar.gz
hechoen said:
That's what I'm thinking. Or when he flashed with Odin he flashed vibrant firmware to it? Have you ever seen that error before?
Click to expand...
Click to collapse
I think you are right. He probably has the phone but flashed a vibrant rom. He refers to "Eugene's Froyo Rom"
Check the link and forum name.
--------------------------------------------------------------------------------
http://forum.xda-developers.com/showthread.php?t=819047
Hi there!
I have a Galaxy Tab 7 and I am a noob on this development stufs.
I am trying to install this version on it:
cafe-ti.blog.br/1835~samsung-galaxy-tab-7-gt-p1000-android-jelly-bean-cm10
And looks like the language is pretty simple but I have no clue how to do it...I mean, I trie using Odin..did not work...
I tried this instead:
[wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_(P1000L):_Full_Update_Guide
but the Recovery mode does not work!
There is any step by step non expert language tutorial to how let the Tab 7" with the CM10?
Thanks from Brazil
Rafael
You try this?
http://forum.xda-developers.com/showthread.php?t=1542897
orangekid said:
You try this?
http://forum.xda-developers.com/showthread.php?t=1542897
Click to expand...
Click to collapse
My one is the 7", not the 7'7" and its the GT-P1000L..
It will work on it?
rafapiloto195 said:
My one is the 7", not the 7'7" and its the GT-P1000L..
It will work on it?
Click to expand...
Click to collapse
I tried this video, passin to 2.3.6 first, using Odin..
youtube.com/watch?v=fXDvq5SaA70&feature=relmfu
workd well, however, after flashing, is not turning on again...
What may can be?
Oh yeah don't use the 7.7 forum then...
You Odin flashed a ROM and now the device won't even turn on? Or is it just boot loop?
orangekid said:
Oh yeah don't use the 7.7 forum then...
You Odin flashed a ROM and now the device won't even turn on? Or is it just boot loop?
Click to expand...
Click to collapse
There is no sign...does not even turn on...
black screen only..nothing...
rafapiloto195 said:
There is no sign...does not even turn on...
black screen only..nothing...
Click to expand...
Click to collapse
Can you link the ROM you Odin flashed?
Sounds like you bricked your device...
edit: if you plug it into your computer does anything pop up on the computer?
orangekid said:
Can you link the ROM you Odin flashed?
Sounds like you bricked your device...
edit: if you plug it into your computer does anything pop up on the computer?
Click to expand...
Click to collapse
I had to come to work and let it at home...
Well, as berfore flash it I let the USB on the debugging, I will track the oneclick root directly to se if at least will get a conecction with a computer;
I will try to send it to the dealer as well.
I believe as I let it on the 2.3.6, wich is the same one running on Kies, still under warranty to perform a hard brick recovery.
Let's see.
Thanks..I'll keep you guys posted.
Yeah let us know, hopefully we can do something, not sure why a GB Stock Odin flash would brick it.
orangekid said:
Yeah let us know, hopefully we can do something, not sure why a GB Stock Odin flash would brick it.
Click to expand...
Click to collapse
Just replying to your question, I flash it with the one on the youtube video link I posted:
www.youtube.com/redirect?q=https://...yuzT76vVlfj4vSE98MTM0ODM0OTI1NUAxMzQ4MjYyODU1
rafapiloto195 said:
Just replying to your question, I flash it with the one on the youtube video link I posted:
www.youtube.com/redirect?q=https://...yuzT76vVlfj4vSE98MTM0ODM0OTI1NUAxMzQ4MjYyODU1
Click to expand...
Click to collapse
Well, looks like it is working again,
however, when I try to turn on on the recovery mode to wipe data,
it shows E: MBR Checksum error
Internal MMC checksum verify failed.
Any ideas?
great idea
+1 orangekid
asdera-and said:
+1 orangekid
Click to expand...
Click to collapse
Ok! Is on the 2.3.3 now.
I want to put the Cyanogen 4.1.1 as described here:
http://forum.xda-developers.com/showthread.php?t=1871113
However, when I tried it shows me the error I mentioned above and also
Failed to verify whole-file signature...
Then , I was able to come to CMW where I should install the Cyanoi 4.1.1 however keeps showing me the error:
E: Can't moun /emmc/
Ideas?
OK
now I tried this room:
Rom: Overcome + Overcome Kernel
Following the guide step by step and then the E: looks like to be damaged. I can not even turn it on again.
Just when I put it to charge, it will show the brick scree (the fone and the computer)...
I am almost givin up...
Does your tab have an SD card in it?
If so try a different one, if not odin 100% stock, then do the root, and ROM flash again.
I'm a noob but I'd been trying my best understanding to ROOT T959W, I'd followed the steps as described in one of the forums here using odin 1.7 and stock+Voodoo-T959VKJ1.tar and the update in sdcard but unfortunately I don't understand, no matter what i do, when the phone turns on it shows the Recovery mode, I'm however able to boot into the downlod mode and my phone is detectable.
The phone was I guess bricked onetime but i'd used oneclick unbrick and it went back fine.
Please help me to at least get it to a running state not necessarily root.
I don't know if this is right, what should i do next ? Flash the rom CM9 ? or have i messed up ? :S
THANKS A TON!
Attached is a preview.
It seems a little odd. Did you clear everything and not flash a rom?
Sent from my SGH-T999 using xda premium
So you have the "W" phone from Wind and you flashed the bootloader? I can clearly see the Tmobile logo, which shouldn't be on a Wind phone. Just hold on, don't flash anything else and give a few, I'm working with bhundven at this very moment to try and dump my bootloader. Your phone still turns on, there is hope but the more you start clicking all over, etc the more damage you can do, so please wait.
getochkn said:
So you have the "W" phone from Wind and you flashed the bootloader? I can clearly see the Tmobile logo, which shouldn't be on a Wind phone. Just hold on, don't flash anything else and give a few, I'm working with bhundven at this very moment to try and dump my bootloader. Your phone still turns on, there is hope but the more you start clicking all over, etc the more damage you can do, so please wait.
Click to expand...
Click to collapse
Sure, I will be waiting, Yes it shows the Tmobile logo and when I connect it to Odinv1.85 it tells me this phone is T959V but infact its a wind mobile.
I'll be waiting for you guys and will be more than willing to donate.
cheers!
zaryan said:
Sure, I will be waiting, Yes it shows the Tmobile logo and when I connect it to Odinv1.85 it tells me this phone is T959V but infact its a wind mobile.
I'll be waiting for you guys and will be more than willing to donate.
cheers!
Click to expand...
Click to collapse
The T959V in odin is just a label in the ini file in the same directory.
You can change that to say anything you want.
I really recommend taking the time now to remove odin, and it's drivers, and install heimdall.
Look around in the wiki for help on that one.
bhundven said:
The T959V in odin is just a label in the ini file in the same directory.
You can change that to say anything you want.
I really recommend taking the time now to remove odin, and it's drivers, and install heimdall.
Look around in the wiki for help on that one.
Click to expand...
Click to collapse
After i replaced the drivers, and ran flash in heimdall, it gives me an error - I ran T959VUVKJ6_STOCK-UVKJ6-One-Click.jar
"Local and device PIT files don't match and repartition wasn't specified
Ending session...
Rebooting device "
zaryan said:
After i replaced the drivers, and ran flash in heimdall, it gives me an error - I ran T959VUVKJ6_STOCK-UVKJ6-One-Click.jar
"Local and device PIT files don't match and repartition wasn't specified
Ending session...
Rebooting device "
Click to expand...
Click to collapse
I didn't say to run it, yet. I'm making a new oneclick for t959w. Hang tight.
bhundven said:
I didn't say to run it, yet. I'm making a new oneclick for t959w. Hang tight.
Click to expand...
Click to collapse
Sure will be waiting
zaryan said:
Sure will be waiting
Click to expand...
Click to collapse
Me and Brian are working on it. He had to go out for a bit, so waiting for him to get back on IRC and I'm testing it and risking bricking my phone for the good of the 959W users, so please be patient until we have a test package that can restore the bootloaders, param's, everything full for a "W" model. I found a very complicated work around to get out of the loop but I rather wait till we have the 1 click tested and it's easier to use and do.
For now, the standard 1 click should get you back to stock, just don't flash the bootloader at all.
getochkn said:
Me and Brian are working on it. He had to go out for a bit, so waiting for him to get back on IRC and I'm testing it and risking bricking my phone for the good of the 959W users, so please be patient until we have a test package that can restore the bootloaders, param's, everything full for a "W" model. I found a very complicated work around to get out of the loop but I rather wait till we have the 1 click tested and it's easier to use and do.
For now, the standard 1 click should get you back to stock, just don't flash the bootloader at all.
Click to expand...
Click to collapse
You are awesome! It worked like charm, thank you getochkn and xda-dev
zaryan said:
You are awesome! It worked like charm, thank you getochkn and xda-dev
Click to expand...
Click to collapse
Glad I was able to help but I couldn't have done any of this with the guidance of bhundven and others from Team Acid. Hopefully I'll have the true stock modem our phone came with soon, full stock recovery, etc and be able to put out a full package to help people who are bricked or want to go back to stock.
getochkn said:
Me and Brian are working on it. He had to go out for a bit, so waiting for him to get back on IRC and I'm testing it and risking bricking my phone for the good of the 959W users, so please be patient until we have a test package that can restore the bootloaders, param's, everything full for a "W" model. I found a very complicated work around to get out of the loop but I rather wait till we have the 1 click tested and it's easier to use and do.
For now, the standard 1 click should get you back to stock, just don't flash the bootloader at all.
Click to expand...
Click to collapse
any luck with the 1 click for the T959W yet? I am more than willing to donate also, my phone is stuck in download mode only so I desperately need this!!!!
munsen55 said:
any luck with the 1 click for the T959W yet? I am more than willing to donate also, my phone is stuck in download mode only so I desperately need this!!!!
Click to expand...
Click to collapse
Give me a few mins, let me see what I can do.
getochkn said:
Give me a few mins, let me see what I can do.
Click to expand...
Click to collapse
Please bro i have the same problem
please can you help me with the t959w bootloader or 1click solution
Hi, I tried to root my phone with this guide androidxda.net/how-to-root-att-lg-g-flex-2-on-android-5-1-1-lollipop-with-one-click-root-method/
Anyway, when the phone rebooted it got stuck at the LG Logo and a Hard Reset doesn't do squat.
It just keeps bootlooping....
Any ideas?
Any help would be appreciated.
I have the same problem but I was able to root and it went into boot loop after I tried to apply the dual screen mod.
why don't enter recovery mode and flash KDZ again?
staticx1 said:
why don't enter recovery mode and flash KDZ again?
Click to expand...
Click to collapse
I will try to flash it, although I never understood what *.DLL file the Flashtool is looking for?
All I got my hands on was this *.KDZ file for my region.
Help..?
mrbennich said:
I will try to flash it, although I never understood what *.DLL file the Flashtool is looking for?
All I got my hands on was this *.KDZ file for my region.
Help..?
Click to expand...
Click to collapse
You need to install Visual C++ runtime library....
Just follow this guide and you'll be OK
http://forum.xda-developers.com/showthread.php?t=2797190
staticx1 said:
You need to install Visual C++ runtime library....
Just follow this guide and you'll be OK
http://forum.xda-developers.com/showthread.php?t=2797190
Click to expand...
Click to collapse
I'll try that out and return to you when I get the results. Working at the moment.
Thanks in advance!
Did you ever get this to work?
winkyeye said:
Did you ever get this to work?
Click to expand...
Click to collapse
I'm sorry to keep you waiting for my reply, I've been working 13h straight two days in a row so I haven't had the time.
Although I finish work in 8h - then I will try this out.
Thanks for checking though!
winkyeye said:
Did you ever get this to work?
Click to expand...
Click to collapse
Okay, I followed the guide and it worked! My phone lit up like a X-Mas Tree!!
THANK YOU!!
So im an idiot I wiped everything including OS in TWRP. Ive managed to get TWRP flashed but Im stuck at that point. Only have bootloader or TWRP I can boot into. please give detailed instructions as ive been trying to sideload and whatever else I can think of for hours. Thanks!
Just MSM back to stock. Easy.
DTop said:
Just MSM back to stock. Easy.
Click to expand...
Click to collapse
I keep getting Sahara communication failed
You can adb sideload a rom I guess ?
DTop said:
Just MSM back to stock. Easy.
Click to expand...
Click to collapse
Now I cant even boot into Edl mode.... not so easy.
Try to flash fastboot rom in this thread
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
It looks like MSM is working now. (I think it wasnt working because I was running it in a VM on a MAC, now that Ive switched to a win 10 machine all looks good.)
Thank you all for the help!
ohh mann, theres a lot of people going to brick their opo 7 pro, like me today and over this weekend