Hi, I have a big issue installing all but one build of the PAC-Man ROM not installing on my Droid Razr Maxx HD. I've tried installing multiple nightly & Dev builds of them ROM but they all boot loop at the Motorola logo. No one seems to care about this issue either. I've posted on almost all social media the Pac-Man ROM community has bit it seems to not be getting any attention. (Excuse me for getting a little off track) I always do a factory reset with twrp twice before attempting to install this ROM, I've also tried repairing the data partition (which is this fix found on Droidrzr forum) I've tried flashing back to stock KitKat, I would try side loading a build but twrp's side load feature doesn't work. Could some one guide me to sending a Dev a boot log so whatever bug is causing this is squashed? I really want to run this ROM. Or, could someone who has had this ROM installed guide on getting it up and running?
http://www.droidrzr.com/index.php/t...8960unofficialodex444baked-08-01-14/?p=451296 is the fix I tried
These are all the builds I've tried installing, only 1 worked.
https://www.dropbox.com/s/0nsoyd5zh8yb3ww/screenshot.jpg
Playb3yond said:
Hi, I have a big issue installing all but one build of the PAC-Man ROM not installing on my Droid Razr Maxx HD. I've tried installing multiple nightly & Dev builds of them ROM but they all boot loop at the Motorola logo. No one seems to care about this issue either. I've posted on almost all social media the Pac-Man ROM community has bit it seems to not be getting any attention. (Excuse me for getting a little off track) I always do a factory reset with twrp twice before attempting to install this ROM, I've also tried repairing the data partition (which is this fix found on Droidrzr forum) I've tried flashing back to stock KitKat, I would try side loading a build but twrp's side load feature doesn't work. Could some one guide me to sending a Dev a boot log so whatever bug is causing this is squashed? I really want to run this ROM. Or, could someone who has had this ROM installed guide on getting it up and running?
http://www.droidrzr.com/index.php/t...8960unofficialodex444baked-08-01-14/?p=451296 is the fix I tried
These are all the builds I've tried installing, only 1 worked.
https://www.dropbox.com/s/0nsoyd5zh8yb3ww/screenshot.jpg
Click to expand...
Click to collapse
i dont know the answer, so ill just throw out a question.
do you know that the pac rom has been updated to kk source?
bweN diorD said:
i dont know the answer, so ill just throw out a question.
do you know that the pac rom has been updated to kk source?
Click to expand...
Click to collapse
I've known, I've tried the updater to kitkat as well, still no luck
Playb3yond said:
I've known, I've tried the updater to kitkat as well, still no luck
Click to expand...
Click to collapse
i only asked because i didnt know.
so i just went and read this entire post (is this the one we are talking about?), and it has not been updated to kk base yet as far as i can see.
if you bootloop at the boot animation then its most likely because your data partition isnt formatted to ext4
I tried that as well, still no luck
Sent from my DROID RAZR HD using Tapatalk
Q&A for [ROM][5.X][XT1028/XT1031] CyanogenMod 12.1 for Moto G [METICULUS]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.X][XT1028/XT1031] CyanogenMod 12.1 for Moto G [METICULUS]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
no calls or data
I have an xt1031 flashed to page plus. I have bootloader 41.19 from a failed lollipop update attempt. I flashed the 4/8 build and I can't make calls and do not have 3g. The network shows as 31000. What should I do?
I have been trying each of his builds and anything newer than 4/8 data hasnt worked I'm on boost if that makes any difference
Verizon?
Good morning,
I'm on an XT1028 still with service through Verizon Prepaid; my bootloader is unlocked and I'm on an optimized KK stock ROM at the moment. I've been following the development of Meticulus' CM12.1 through the primary thread and there has been a lot of discussion as to problem solving and issues on the XT1031 and various carriers but little mention as to the status of the latest weekly builds on the XT1028 still on Verizon in terms of functionality or hiccups from users. Does anyone have the latest versions running on their 1028? Are any of the data or service issues present when running it on Verizon?
Thanks.
Followup: Installed the latest 4/25 weekly on my XT1028 on Verizon Prepaid. Installed fine, got phone and SMS, but the network is identified as Boost Mobile and I have no mobile data. Is there a fix? Is a build.prop edit necessary for Verizon? Thanks.
Reboot then bootloop
Hi, I've been trying to get my installation of this ROM working for two days now, but keep running into an issue that I cannot seem to solve
My device is a 2013 Moto G XT1031 (Boost Mobile) with Bootloader version 41.05 and the latest CWM recovery.
The issue has been occurring on build 4/8, 4/25, and 5/2.
The exact steps I have been taking to install this ROM (for all builds) and then what happens:
Bootloader is unlocked
Going into recovery and wiping dalvik cache then factory reset (wipe)
Installing CM11 (latest snapshot) [on my first attempts only, not afterwards since it made no difference anymore]
Factory reset again (just to be certain)
Installing the zip for a build specified above
Installation always succeeds with no errors
Installing gapps-L-3-28-15 with success
Reboot into android
First boot always succeeds (and takes appropriate length of time)
Set up the phone (connect to wifi, google account, restore my apps [18 of them, just common popular ones, mostly Google actually], and apply a theme
Use it for a couple minutes (enable root and usb debug in Developer Settings, set my apps up, etc)
Restart two or three times without any hiccups
Suddenly, after a random reboot, the boot animation happens twice (instead of only once how it supposed to be)
Phone boots and shows "Android is starting..." and optimizes the apps (104 of them) one by one
Goes to "Starting apps..." and succeeds
The phone shows the lockscreen, but only for approximately 1-2 seconds
Phone reboots
CM boot animation runs twice, once for a long time then again for a shorter period of time
Phone goes through process described above (Android is starting, optimizes, then flashes lockscreen)
This just happens again and again and again
Steps I've taken to try and remedy the issue:
Run: "adb reboot" from computer while phone is optimizing apps
Hard reset the phone by holding the power button for 15 seconds
Run: "adb reboot bootloader" from computer when possible, then go into recovery and wipe both dalvik and normal cache
Swipe on the lockscreen as soon as I see it to see if I can get in (lockscreen does not respond though)
Go into recovery and shut the phone off, then start again
Let it loop for about 2 hours
I had also tried leaving the phone overnight looping, and when I woke, it was still looping, but after a eight or so more hours, I came back and found that it had booted and stayed on (and was working completely normally).
The phone was running stock 4.4.2 completely fine before this (with no reboot issues). I attempted installing the latest version of BlissPop, which exhibits a similar but still different issue (it would always boot into android [and not loop], but after a couple restarts, it showed an error about the System UI crashing that would pop up every time I dismissed it, and continued doing so after each restart after that). CM11 seems to be running well on the phone (but only in my very limited test while transitioning between ROMs and such).
I unfortunately cannot provide a log due to not being able to run any logging app during bootup, but hopefully I have provided enough details above to allow understanding of the issue and maybe bring suggestions on how to fix it. I can provide any more information needed on request. I really would like to get this phone back up and running (and especially on this ROM as I do love the work the creator has put into it).
Sorry for the very large wall of text :| Thank you in advance for any suggestions on how to proceed from here
tartilc said:
My device is a 2013 Moto G XT1031 (Boost Mobile) with Bootloader version 41.05 and the latest CWM recovery.
Click to expand...
Click to collapse
Having not experienced your issue I can't say for certain, but it may be possible you need to update the bootloader to at least 41.13, which is the 4.4.4 KitKat BL? I'd run it past @Meticulus and see if he might have some direction, there. Also, does the theme you apply have a different bootanimation, by any chance? There is a known issue/potential memory leak related to large boot animations on Lollipop that can cause failures at boot or bootloops.
a_gert said:
Having not experienced your issue I can't say for certain, but it may be possible you need to update the bootloader to at least 41.13, which is the 4.4.4 KitKat BL? I'd run it past @Meticulus and see if he might have some direction, there. Also, does the theme you apply have a different bootanimation, by any chance? There is a known issue/potential memory leak related to large boot animations on Lollipop that can cause failures at boot or bootloops.
Click to expand...
Click to collapse
Thank you for the advice I have downloaded a file with the name of falcon_boost_user_4.4.4_KXB21.14-L1.57_57_release-keys-cid9.xml.zip, unzipped it, then flashed according to the directions posted on how to restore the stock firmware. Everything during installation seemed to go smoothly, but at this point, I am stuck again. When I try to boot up, it just shows the splash screen ("Warning Bootloader Unlocked") and stays there indefinitely :| I have hard reset the phone and got into boootloader, which states that I am now on 41.13, but it just stays at that splash screen Should I boot into TWRP and try flashing an update.zip of the stock 4.4.4 Boost ROM? What else can I try?
EDIT: Flashing the stock update did not work, but I was able to install CM11 (so I'm am on bootloader 41.13 with CM11 currently)
EDIT TWO: Yes! I'm on bootloader 41.19 now and official CM12.1 nightly is booting!!
EDIT THREE: NOOOO It just started bootlooping again! CM animation twice, "Android is starting...", lockscreen, then cycle again. It happened after I changed my DPI from 320 to 280 (never restarted, just looped from then on).
I now have a logcat! I'm having trouble understanding what it is talking about, but I started logging as soon as the "Android is starting..." box changed status from "Optimizing apps x of x" to "Starting apps" and then stopped logging after a couple seconds of the boot animation. It is attached below (split into three parts).
EDIT: Attached what might be a better logcat reading (recording started right before lockscreen showed, I tried unlocking it, then stopped as soon as I saw the blue animation)
tartilc said:
Thank you for the advice I have downloaded a file with the name of falcon_boost_user_4.4.4_KXB21.14-L1.57_57_release-keys-cid9.xml.zip, unzipped it, then flashed according to the directions posted on how to restore the stock firmware. Everything during installation seemed to go smoothly, but at this point, I am stuck again. When I try to boot up, it just shows the splash screen ("Warning Bootloader Unlocked") and stays there indefinitely :| I have hard reset the phone and got into boootloader, which states that I am now on 41.13, but it just stays at that splash screen Should I boot into TWRP and try flashing an update.zip of the stock 4.4.4 Boost ROM? What else can I try?
EDIT: Flashing the stock update did not work, but I was able to install CM11 (so I'm am on bootloader 41.13 with CM11 currently)
EDIT TWO: Yes! I'm on bootloader 41.19 now and official CM12.1 nightly is booting!!
EDIT THREE: NOOOO It just started bootlooping again! CM animation twice, "Android is starting...", lockscreen, then cycle again. It happened after I changed my DPI from 320 to 280 (never restarted, just looped from then on).
Click to expand...
Click to collapse
Whoa, that's a lot of jumps! Be careful with the bootloader, as once you're on the Lollipop BL (and it appears you've already made that jump), you're kind of locked into LP ROMs from this point out. The point you were failing on the 4.4.4 stock would probably have been a good time to go in and manually restore things via fastboot just to make sure all your partitions were straight. What did you use to update your bootloader to 41.19? And have you tried a ROM specifically designated for the CDMA-only XT1031/Boost? I've only used the Meticulus and the unofficial Linaro CM12.1 buld by Cody on my XT1028 specifically because I know they're CDMA compatible, so I'm not sure where the official CM12.1 sits on that right now.
I know there exists an actual legitimate stock 5.0.2 Boost ROM and it's possible that may be able to be restored manually as a last resort, so don't move too hastily.
XPOSED on Meticulous Rom?
Is there any way to get XPOSED working? I really want gravity box for LL.
Awesome. I was going to download this from your site today but it is showing an error with connecting to its database. None of the computers i have access to can get on your site.
no wifi no cellular network
and after i flashed cynogenmod 12.0 in my moto g 2014, there is no wifi nor network :'( what am i suppose to do now?
Ui crash
Is there anything special i need to do to flash this update? i'm running on the 408 build and every time i try ti go the next version there is an issue. Either data stops working or i get a system Ui crash like on the 530 build. I would love to get this issue fixed with the 606 build. Besides that, great job.
a_gert said:
Whoa, that's a lot of jumps! Be careful with the bootloader, as once you're on the Lollipop BL (and it appears you've already made that jump), you're kind of locked into LP ROMs from this point out. The point you were failing on the 4.4.4 stock would probably have been a good time to go in and manually restore things via fastboot just to make sure all your partitions were straight. What did you use to update your bootloader to 41.19? And have you tried a ROM specifically designated for the CDMA-only XT1031/Boost? I've only used the Meticulus and the unofficial Linaro CM12.1 buld by Cody on my XT1028 specifically because I know they're CDMA compatible, so I'm not sure where the official CM12.1 sits on that right now.
I know there exists an actual legitimate stock 5.0.2 Boost ROM and it's possible that may be able to be restored manually as a last resort, so don't move too hastily.
Click to expand...
Click to collapse
Yeah that is a lot of jumps I'd be hella nervous myself lol
K well guys today is your day , as a_gert stated there is a boost 5.02 , and it does work fine on any cdma xt1031 so first flash that
-depending on signal you may wish to update your modem also there is only 4.4 modem for boost public
Buuuutttt nvm all that for now
The problem the ONLY problem I have had when bootlooping was that it was not prepped correctly and my phone came with 41.19 and came unlocked-
1.) Make sure you are on c/O SuperR-Developer -- PhilZ-Touch-6.59.0_LPK .img OR twrp * twrp-2.8.6.0.1-falcon_STOCK.img
**Notice For Even PhilZ I only Named the -IMG- Version which means flash it with adb properly please
***if ever after you flash it via recovery it will show partition mismatch which apparently is no problem just that the custom recovery does not match the factory one is all.. ..
1.) Download PhilZ-Touch-6.59.0-LPK.img to PC
2.) Reboot to bootloader
3.) Plug phone into PC
4.) Open terminal in directory where the img is located
5.) Issue the following command:
Code:
fastboot flash recovery twrp-2.8.6.0.1-falcon_STOCK.img
2.) Do a format of System w/EXT4 AND REBOOT INTO RECOVERY
3.) Format dalvik/art + Cache + Data w/EXT4 & REBOOT INTO RECOVERY
4.) Format Data PLUS data/media with f2fs then Do the 'factory wipe' then manually format data/media with f2fs again please ..
- SIDELOAD THE ATTACHED STOCK LOLLIPOP NO GAPPS GIVE IT TEN MINUTES REBOOT FEW TIMES/ POWER DOWN ONCE & REBOOT AGAIN
5.) Reboot into recovery and flash the first zip I have attached (I_nomodem is just IF you find your 4.4 radio baseband worked better and want to format it for LP again in the future WITHOUT LP radio included)
****EDIT - SEE VERY BOTTOM OF POST CENTERED AREA LOL
6.) Power off & reboot into recovery manually
7.) Flash your Rom (OR STOCK LOLLIPOP DEBLOATED AGAIN) + Kernel(if any custom one) + Gapps -wait 5-15 minutes for initial boot
* I recommend AeroKernel for the included stock lollipop 5.0 debloated if not the stock kernel or after flashing and few reboots to settle ,just follow instructions from that thread if any are needed..
Please anyone with any moto g don't think updating your bootloader is needed or even really safe whatsoever it is THE main reason moto phones get bricked or messed up otherwise it is not necessary or any kind of improvement yes once you are on an LP one leave it be..
Other flashing yeah okay, bootloader no if so proceed with utmost caution.
After this your modem will be updated with the cdma LolliPop one, if you have any signal issues or what not go to the stock modems section for your specific phone and flash the one for your specific carrier and/or find the "update RIL" flash thingie on here in moto G section and follow instructions but the boost modems work on all cdma variants of Moto G..
For whatever reason I could not upload files to xda I tried five times it kept dying so here there are on googldrive :good:
**Do not Click individual Item Use the Download Arrow At the Very Top of Page to DL the zip properly plz
1.) Falcon LolliPop Part Updater + Modem
2.) Falcon LolliPops Part Updater (No Modem)
_____________________________________________________________________________________________________________________________
--EDIT #2-- LolliPop 5.0 Falcon XT1031 debloated
SIDENOTE: IF YOU FORMAT DATA/MEDIA & DO NOT KNOW HOW TO SIDELOAD THE ABOVE STOCK DEBLOATED ZIP I'M PRETTY SURE YOU'RE NOT GONNA LIVE TO TELL BOUT IT
BE PREPARED TO SIDELOAD - REBOOT IMMEDIATELY AFTER SIDELOAD THE ZIP ROM IS COMPLETE NOT INTO RECOVERY NOT ANYWHERE ELSE SYSTEM REBOOT
-And wait 5-10 Minutes For First Boot - You Only Need to Do this for the first LP rom loadin after that normal flashing do NOT format data/media anymore after this initial setup
--You can try to just use the script, but it did not work for me after many tries the above was the real solution and has been perfect since
2,3,4,5,6,7
·Install flashable (Boost Mobile/CDMA XT1031 only):
·Download falcon_PhilZ-Touch-6.59.0_LPK.zip to phone
·Reboot into current custom recovery
·Flash zip
·Enjoy!
Use the script again to prepare you partition properly anytime you are about to flash a new rom clean after factory wipe/ format is done..
As I said before data/media is never necessary again after this and MAY not be this time but it is the only thing that kept me out of bootloops ,and if you do it yeah it will force you to sideload your rom it erases all leftovers and your rom zips off the internal card and formats them for fresh start The script does not format /media guys k no worries
------TWRP 2.8.6..1 does not seem to restore properly- -system write only thing .. PhilZ-Touch is fine as is twrp-2.8.6..0 also
Nice, got 41.19 BL!
I tested this and works fine, now i have my shiny new moto g running AICP. Thanks @shoobiedoobiiwhompwop!
rammsteinaus said:
I tested this and works fine, now i have my shiny new moto g running AICP. Thanks @shoobiedoobiiwhompwop!
Click to expand...
Click to collapse
K welcome
Arrite guys for a little clearer step by step see here please apologies carrying on and on I have been gone quite some time here http://forum.xda-developers.com/mot...-moto-g-xt1031-lollipop-t3132974#post61346260
It actually Runs really nice, really REALLY nice once the system app package I am adding shortly was used and tweaked out ..
Is it safe to flash cyanogenmod onto the verizon moto G - 1028 4.3 plus
Hello community ,
I had serious problems flashing cyanogenmod onto a galaxy S3 that was running stock 4.3 , verizon bricked my S3 , and said that the software was not authorized by Verizon. Does this problem exist across the board for any verizon phone running 4.3 or higher ?? If so ... then anything to do with flashing cyanogenmod onto a verizon phone should have warnings in BIG RED LETTERS ... because you cannot even buy a new phone with 4.2 on it anymore.
Issues flashing cm12.1 on XT1031 Please Help
Tried flashing the second to last release on 2 of my moto g xt1031's and I keep getting diff issues. This is what I did:
I had complete stock 4.4.4
unlocked bootloaders,
flashed latest TWRP,
Did a factory wipe
Flashed CM12.1
Flashed Gapps
Rebooted
Stuck in boot loop--> waited over 30mins and rebooted a few times. No luck.
I heard to try flashing CM11 first, then flashing 12.1 so I did this:
Back to TWRP -->factory wipe
Flash cm11
reboot to cm11
reboot to TWRP -->factory wipe
Flash CM12.1
Now I can get past the boot logo and begin setup, however, it will randomly reboot to the boot logo and then back to setup after a minute or so- erasing anything I've already input. Sometimes I could make it through the setup to the desktop, but then it would do the same thing. Had this same exact issue on both of my xt1031s with the same process used for both.
After this I tried doing a factory wipe and then also wiping /data and /system in the advanced wipe options and then flashing cm12.1 and still had the same issue of the rebooting. At some point I must have done somthing, but I started trying to just flash cm12.1 several times over to see if it would stick and I noticed when I did the factory wipe I was getting a parsing error so I tried doing a full data format, and fix data filesystem. I'm not sure what format it was supposed to be so I did a ex4. THat stopped the parsing error, but still having the same issues.. any help would be appreciated.
Moto G CDMA issues
citizen3rased said:
Tried flashing the second to last release on 2 of my moto g xt1031's and I keep getting diff issues. This is what I did:
I had complete stock 4.4.4
unlocked bootloaders,
flashed latest TWRP,
Did a factory wipe
Flashed CM12.1
Flashed Gapps
Rebooted
Stuck in boot loop--> waited over 30mins and rebooted a few times. No luck.
I heard to try flashing CM11 first, then flashing 12.1 so I did this:
Back to TWRP -->factory wipe
Flash cm11
reboot to cm11
reboot to TWRP -->factory wipe
Flash CM12.1
Now I can get past the boot logo and begin setup, however, it will randomly reboot to the boot logo and then back to setup after a minute or so- erasing anything I've already input. Sometimes I could make it through the setup to the desktop, but then it would do the same thing. Had this same exact issue on both of my xt1031s with the same process used for both.
After this I tried doing a factory wipe and then also wiping /data and /system in the advanced wipe options and then flashing cm12.1 and still had the same issue of the rebooting. At some point I must have done somthing, but I started trying to just flash cm12.1 several times over to see if it would stick and I noticed when I did the factory wipe I was getting a parsing error so I tried doing a full data format, and fix data filesystem. I'm not sure what format it was supposed to be so I did a ex4. THat stopped the parsing error, but still having the same issues.. any help would be appreciated.
Click to expand...
Click to collapse
Hello Citizen 3 , You are farther along than me. I have only successfully flashed cyanogenmod once , and that was on an S3 so it was straightforward. I still have not unlocked my bootloader. I have not been able to copy and paste the long strings of characters from motorola , inside command prompt. It would be so nice if Meticulus or one of the other developers could get this to be an official release. The Moto G , and a few other inexpensive phones ( LG realm , Kyocera Hydro latest version ) would work like greased lightning , if they were running CM12. Any help that you could offer with pasting the strings of unlock code would be so appreciated.
Hello
I use a ROM with XT897 CM10.2.1 and SIM MOD CornholioGSM since July 2014, it was working fine.
I flashed the ROM-cm-SNAPSHOT-YOG4PAO23E 12.1-20150901-xt897 (RELEASE) one month ago and the ROM worked well. A week ago, the phone was much slower, I turn off reboot and since it constantly!
I made the following transactions with TWRP:
- Reset factory
- Flash ROM (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897)
- Flash ROM (BlissPop-v4.0.1-xt897-OFFICIAL-20150917-1514)
- Flash recovery (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897-recovery.img)
- Flash TWRP
- Flash ROM (cm 12.1-20151007-SNAPSHOT-YOG4PAO339-xt897)
Always the same, I have the boot logo and the logo of the ROM and the phone reboots.
The ROM (CM12.1) has started once and then restart the phone has rebooted repeatedly.
I tried with or without a SIM card.
I do not understand where does the problem, can you help me?
Well not having the phone in front of me, I don't really quite understand the issue myself - however, I would suggest using RSD Lite and one of the FXZ files to flash everything (including recovery) back to stock.
If you still have issues, there is a bigger problem (likely hardware failure).
Hello
sorry if my explanation was not clear.
I added a photo which shows the two steps in the operation of my phone.
Step 1: Start the phone .
Step 2 : boot ROM CM12
The Step 2 lasts 23 seconds then return to Step 1 and Step 2 and Step 1, Step 2 infinitely .
I hope this is understandable .
I read on the forum that used some RSD Lite but as I had not used for the ROM installation, I did not understand why use .
I'm a new user, i can't post picture, I send link by PM, thanks.
I thought my last post made it clear what purpose RSD Lite and the FXZ files are - they restore the phone to stock completely - ROM, recovery, everything will be reset to when it was stock from the factory (granted it may be a newer image than what shipped on the phone, but you get the point).
Again, as I stated previously, if you still have issues after flashing everything stock your issue is likely not software, but hardware.
I searched the forum about RSD Lite. Now I understand its usefulness.
I used RSD Lite to flash the ROM asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
My phone had with SPRINT .
The flash went well but unfortunately I still have the same problem :
Step 1: unlocked bootloader screen
Step 2: The red M MOTOROLA
Step 1, Step 2 , .....
Is there another test or I can consider it a hardware problem ?
Hardware problem can come out of the MODSIM ? I use a SIM card in the phone for 16 months.
Nicolas.636 said:
I searched the forum about RSD Lite. Now I understand its usefulness.
I used RSD Lite to flash the ROM asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
My phone had with SPRINT .
The flash went well but unfortunately I still have the same problem :
Step 1: unlocked bootloader screen
Step 2: The red M MOTOROLA
Step 1, Step 2 , .....
Is there another test or I can consider it a hardware problem ?
Hardware problem can come out of the MODSIM ? I use a SIM card in the phone for 16 months.
Click to expand...
Click to collapse
The hardware issue is likely not related to the SIM modification. As to what exactly has failed, I'm not sure... perhaps the NAND or something else memory related.
Aouch aouch...
Thank you for your help.
I think it remains for me to search for a motherboard for photon Q.
Long life in the forum!
Use "borrowed" TWRP recovery image.
Nicolas.636 said:
Hello
I use a ROM with XT897 CM10.2.1 and SIM MOD CornholioGSM since July 2014, it was working fine.
I flashed the ROM-cm-SNAPSHOT-YOG4PAO23E 12.1-20150901-xt897 (RELEASE) one month ago and the ROM worked well. A week ago, the phone was much slower, I turn off reboot and since it constantly!
I made the following transactions with TWRP:
- Reset factory
- Flash ROM (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897)
- Flash ROM (BlissPop-v4.0.1-xt897-OFFICIAL-20150917-1514)
- Flash recovery (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897-recovery.img)
- Flash TWRP
- Flash ROM (cm 12.1-20151007-SNAPSHOT-YOG4PAO339-xt897)
Always the same, I have the boot logo and the logo of the ROM and the phone reboots.
The ROM (CM12.1) has started once and then restart the phone has rebooted repeatedly.
I tried with or without a SIM card.
I do not understand where does the problem, can you help me?
Click to expand...
Click to collapse
I had a similar incident a few days ago. I have a hard time stopping myself from pushing the limits. Usually I stop when it's broken. I tried RSD Lite, SDB sideload/ flash, zip install from recovery, fastboot(mine's dead), all with no luck.
Any how, If you have CWM, temporarily change to TWRP. If you already have TWRP it's easier.
XDA has a TWRP recovery image in the forum. Put that in your sdcard (I had to paste it from my computer because my xt897 was soft bricked). Flash from TWRP.
Worked fom me. got my phone back after 1 week of flashing everything and then some.
Good luck.
http://forum.xda-developers.com/showthread.php?t=2295643
http://forum.xda-developers.com/showthread.php?t=2295643&page=2
Hello
thank you for this new information.
I tried it and it worked with the ROM [PQ_ICS-Stock] but only with that one!
I tried the ROM [PQ_JB-421] , several Cyanogen ROM but still the same looping boot problem.
I tried several version of TRWP without success .
I do not understand why my Photon Q only works with this ROM [PQ_ICS-Stock] .
Is still a motherboard problem ?
Hello everyone
I'm going crazy !
As I had not managed to solve my problem, I ordered a mainboard on ebay.
Today I realized the SIMMOD on this new board.
when I restarted phone the same startup problems with the ROM SPRINT !
I unlocked the bootloader .
I installed TWRP 2.7.1.2
I installed CM12.1-20151219 - NIGHTLY - XT897
Still the same problem starting loop.
Someone an idea ?
Nicolas.636 said:
Hello everyone
I'm going crazy !
As I had not managed to solve my problem, I ordered a mainboard on ebay.
Today I realized the SIMMOD on this new board.
when I restarted phone the same startup problems with the ROM SPRINT !
I unlocked the bootloader .
I installed TWRP 2.7.1.2
I installed CM12.1-20151219 - NIGHTLY - XT897
Still the same problem starting loop.
Someone an idea ?
Click to expand...
Click to collapse
If you can't RSD Lite, something is up. Either you are not doing the process correctly, or there is something wrong with the device (still).
Perhaps you were always on ICS and never made the official jump to JB? You say you can RSD Lite to an ICS version, just not a JB version? So 4.0.x works but 4.1.x does not?
Again I'm talking stock. If stock doesn't work, I wouldn't even attempt CM. Start with the basics, then work your way towards the aftermarket.
I agree that if the stock rom does not work after the installation with RSD Lite is that it remains something (software) .
The first motherboard I used 12.1 CM for several months it is that the phone supports android 5.1
I agree that it must abort running a stock ROM before flashing a ROM CM. But the ICS ROM STOCK works!
It is possible that I did not do the process correctly .
What surprises me is that the second board had the same problem with the ROM SPRINT !
I will do other tests.
Nicolas.636 said:
What surprises me is that the second board had the same problem with the ROM SPRINT !
Click to expand...
Click to collapse
This is the part that makes me think you are perhaps missing some step in the process somewhere.
Can you RSD Lite to ICS? Not flash it with TWRP. If that is successful, try to RSD Lite to the latest JB again.
I modified the second motherboard ( mod sim card ) and I started the phone with the ROM SPRINT and I got the boot problem repeatedly.
the common point of two motherboards is that they both have a bad ESN .
I will do other tests.
Nicolas.636 said:
I modified the second motherboard ( mod sim card ) and I started the phone with the ROM SPRINT and I got the boot problem repeatedly.
the common point of two motherboards is that they both have a bad ESN .
I will do other tests.
Click to expand...
Click to collapse
Bad ESN shouldn't prevent booting... it would prevent you from activating the device on the Sprint network, but I would imagine you don't care about that...
arrrghhh said:
it would prevent you from activating the device on the Sprint network, but I would imagine you don't care about that...
Click to expand...
Click to collapse
yes
I used RSD Lite 6.1.6 for flashing the ROM [ 2014-03-09 - TSv2 ] but the process has blocked after the flash.
Here is what I did :
1- run RSD Lite
2- Start the phone in FASTBOOT mode.
3- usb phone connection to PC
4- opening of the ROM [ 2014-03-09 - TSv2 ] and "uncompress and start flashing"
5- flash goes well
6- the phone reboots => Logo M red => telephone reboot => Logo M red => again ....
7- RSD Lite waits for the restart ... [ it waits again, LOL ]
8- I turned off the phone and I unplugged.
9- I turned on the phone who start properly, I arrived at the language selection screen .
The ROM is an android version 4.0.4 , I think you know this ROM .
Why the process with RSD Lite has blocked the phone to reboot ?
That's what I did wrong in the process?
I have read many forum post, I tried several methods but only in the ROM 4.0.4 STOCK work. Flashed with RSD lite or restoration of a backup with TWRP.
I have the bootloop problem using RSD Lite 6.2.4 for ROM 4.1.2 CSPIRE or ROM 4.1.2 SPRINT. No error message of RSD lite. No error message of phone.
I've modified the XML file but it changed nothing.
Same problem using TRWP with custom ROM or restoration of a backup ROM4.1.2 JB.
Same problem using OPEN RECOVERY 209 with custom ROM.
Where is the problem ?
I would use CM12 ROM.
Nicolas.636 said:
I have read many forum post, I tried several methods but only in the ROM 4.0.4 STOCK work. Flashed with RSD lite or restoration of a backup with TWRP.
I have the bootloop problem using RSD Lite 6.2.4 for ROM 4.1.2 CSPIRE or ROM 4.1.2 SPRINT. No error message of RSD lite. No error message of phone.
I've modified the XML file but it changed nothing.
Same problem using TRWP with custom ROM or restoration of a backup ROM4.1.2 JB.
Same problem using OPEN RECOVERY 209 with custom ROM.
Where is the problem ?
I would use CM12 ROM.
Click to expand...
Click to collapse
Without having the device in my hands, it's hard to say for sure. The only difference I can see you are doing differently from me is using a newer version of RSD. I doubt that would be an issue, but may want to try other RSD versions.
In the end, I suppose if 4.0.4 works, use that...
Thank you for you help.
I'll buy a other PHOTON Q on EBAY.
I do other test with the new PHOTON Q.
Hello
I received my new q photon.
It is version 4.1.2
I unlocked the bootloader .
I made a backup with TWRP and OPEN_RECOVERY_209 .
I tried an installation of 3 different ROM but I have an error message !
I do not understand where does the problem ?!
Is this a bad version of TWRP or ROM ?