{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
These unofficial builds are based on the Ziyann t30 Z-Kernel available at https://github.com/Ziyann/android_kernel_acer_t30
All my specific device tree can be integrated in the CyanogenMod project.
https://github.com/picasso-m-mf-dev/android_device_acer_a700
These builds are based on some Graphic Legacy code, thanks to @pawitp for his patches : https://gist.github.com/pawitp/c8a4b32ecd838146192b
Downloads
cm-12.1-20150904-UNOFFICIAL-a700
- CM Updates
cm-12.1-20150721-UNOFFICIAL-a700
- CM Updates
cm-12.1-20150708-UNOFFICIAL-a700
- CM Updates
- Android-5.1.1_r6 tag
cm-12.1-20150616-UNOFFICIAL-a700
- CM Updates
- Android-5.1.1_r4 tag
cm-12.1-20150606-UNOFFICIAL-a700
- Using Z-Kernel
- Using Grouper HWcomposer Blob 5.1 - LMY47D
- android-5.1.1_r3
http://acer.shreps.fr
Requirement
An unlocked Bootloader - JB Version
An updated CWM (6.0.5.0+), CTR, or TWRP (2.7+) recovery
Installation
Do a Nandroid Backup!
Wipe data/factory reset if coming from another ROM or version of CM. If you are already on CM12 or a previous build of CM12.1, just make Wipe Cache & Wipe Dalvick-Cache for a proper upgrade.
Install the ROM using Recovery
Install the adapated Google Apps (Latest Paranoid Gapps for 5.1)
Note: The partition layout of CM12/CM12.1 is identical to that of CM11 with LVM and thus you may use CWM to backup/restore.
Bugs & FAQ
Known Issues:
RIL not compatible with A701
Flashing L might take a while in recovery (please be patient)
First boot might take a while too !
Setting brightness to minimum while on auto brightness may cause the screen to go completely dark with no way to set it back except for guessing where the brightness setting is or using adb to force set a higher brightness. (should be fixed)
If you have a black screen at first boot or after bad settings manipulation, use this commande in adb :
Code:
adb shell "echo 255 > /sys/devices/platform/pwm-backlight/backlight/pwm-backlight/brightness"
If it doesn't work, push power to enable your screen and try the command again.
If the bug comes with auto-brightness enabled, you can put your sensor on a light to force it to level up the brightness.
SELinux not in enforcing mode
GPU HWComposer & HDMI, please check this post
R.
Ahhh! Just as I'd resolved to sell my ol' A700 and purchase a new device, here you come with your awesomeness again, Shreps!
I'll give this a try if I can in the next few days - and savor the irony of having this on 5.1 when LG can't be bothered to release their LP ROM to my GPad 8.3...
Mark
Thanks a lot, nice to have the latest OS to play with, although my A700 had been succeeded, this is still great stuff!
Just installed. No problems so far. Big thanks.
No many feedback here
Hope it's running well
Plus, don't hesitate to try the Carliv Touch Recovery I made also for A700 : http://forum.xda-developers.com/showpost.php?p=61376552&postcount=5
Shreps said:
No many feedback here
Hope it's running well
Plus, don't hesitate to try the Carliv Touch Recovery I made also for A700 : http://forum.xda-developers.com/showpost.php?p=61376552&postcount=5
Click to expand...
Click to collapse
downloading both now!
My parents have a Acer A700 . I have changed ROM from CM11 to Pacman, because the performance was very poor. They are actually very happy with it. What is the performance of your CM12 against CM11 or Pacman KK? Is it worth changing to Lollipop.
ok here's my findings...
successfully customized and settled into it, very stable, and have not found anything broken, with 2 minor exceptions:
1. bluetooth didnt want to receive a titanium backup file (but probably due to file extension and not a bug?)
2. expanded desktop did not retract nav/notification bars properly until the setting was turned off and then back on again.
in regards to recovery, in the wipe menu theres no options or descriptions distinguishing wipe data apart from wipe data+media.... although in the storage/mounts menu, there was different options for each and thats the method i used to wipe clean.
===========================================
system partition space....
i had to resort to the Micro gapps to install successfully, even after deleting about 50mb of not-necessarily unneeded apps. after installing that though, i installed swype (/data) and deleted AOSP keyboard (40mb+ /system) allowing for the installation of Mini gapps.
also, this rom has Ringtones included, which are useless on a wifi-only device so i was able to save another 20mb or so.
Thank you, Shreps, for this ROM! Have been testing it for a couple of days, and it's nice, the performance is the same as on CM 11 - actually it feels even smoother
Still, I have encountered two issues so far.
First is poor video performance when LiveDisplay (adaptive colour temperature) is on (i.e. at night) - but I think it is not the ROM's fault: our tablet is not brand new
Second issue is noise in headphones (there was no noise on CM 11). Disabling stock AudioFX (and its complete removal) as well as installing ViperFX, which I used on CM 11, change some audio effects but not the constant ssssshhhhhhh.
Everything else is very nice
curious, would the partition resize function in the new 2.8.7 TWRP be of any help for making this tab lollipop friendly?
installed "cm-12.1-20150616-UNOFFICIAL-a700"
working great so far - only thing was that I need to install nano gapps (all others ended in: not enough space on /system)
thx a million Shreps
Sterist said:
curious, would the partition resize function in the new 2.8.7 TWRP be of any help for making this tab lollipop friendly?
Click to expand...
Click to collapse
Changing partition size on the A700 seems dangerous. You will have no tools to go back in case of crash.
But if the /system partition size becomes a problem, a quick possible fix is to merge the A510 code in order to use LVM
and merge /system and /flex as a unique bigger /system partition
(/flex is an unused partition with CyanogenMod, only used by the Acer stock)
Shreps said:
Changing partition size on the A700 seems dangerous. You will have no tools to go back in case of crash.
But if the /system partition size becomes a problem, a quick possible fix is to merge the A510 code in order to use LVM
and merge /system and /flex as a unique bigger /system partition
(/flex is an unused partition with CyanogenMod, only used by the Acer stock)
Click to expand...
Click to collapse
do you know if the system and flex partitions are consecutive on the table?
by my limited knowledge of resizing partitions, it is my understating that, for example, if flex is immediately after system, shrinking flex from it's beginning towards its own end, and expanding system from it's end outwards would have the least potential to cause issues with the table
if this is the case, or otherwise the risk of problems are merely theoretical or on the basis of a battery dying mid-process or an obscure crash like overheating... I am willing to be the guinea pig
Thought zkernel is default 1.6 ghz clock. I see this ROM has it capped at 1.5 ghz. Is that by design?
Awesome ROM btw so far. It is just wicked snappy. Got 20K in Antutu after first boot and everything defaults. Not bad for a 3+ yr old device.
Kudos Shreps, great job.
A new build is online based on the r6 tag
Get your test Rome, thank you for your work.
Just wanted to say Thank You so very much for this update! I was all set to get rid of my A700 and I just flashed this ROM via Clockwork and love it!
Thank you, shreps. My A700 runs 5.1.1 since four days with only one random reboot. Everything works fine and smooth. No graphic memory issue, as in the previous rom. Good work!!
Sent from my A700 using XDA Free mobile app
Wow Awesome going to flash r6 tonight after being on r4 for a week.
We are incredibly lucky to have Shreps developing the latest OS for A700. Thanks Shreps
Related
Q&A for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-5]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-5]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
themes
yajnab said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This Support of the CyanogenMod is Unofficial and the sources are up at Androidarmv6
Installation
- First time flashing CM11 to your Galaxy Fit(Beni) (or coming from another ROM)?
Root your device and install ClockworkMod Recovery 6.0.4.6 or above
Reboot into Recovery using 2-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM10/CM10.1/CM10.2 prior to 20131223 Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally restore /data from Nandroid Backup (the update will wipe your /data)
Optionally install the Google Addon
Working List
XDA:DevDB Information
Cyanogenmod 11 for Galaxy Fit, a ROM for the Samsung Galaxy Fit GT 5670
Contributors
yajnab, yajnab
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 2.6.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2013-12-23
Last Updated 2014-01-16
Click to expand...
Click to collapse
does this rom supports cm11 themes...?? cause im more concerned for the themes
Keyboard and buttons problem
Hi guys,
i would appreciate if someone could give me a hand with problems i'm having after installing CM11 on GT-S5670.
Phone was bought from serbian MTS operator and is locked just for that one.
Previously (few years ago) i installed CM7 and it was working fine.
Today i have installed :
CWM-6.0.5.3
cm-11.0.0-RC14
and
mini-gapps-cm11-20140317-signed
I have done all wipes as said in instruction, when phone started, in initial settings i had first problem, there was no keyboard to enter wi-fi and google account data, i skipped all settings and when it actually started i missed both keys left and right from HOME and as allready said there is no keyboard.
I must say that both buttons work in CWM
markobona said:
Hi guys,
i would appreciate if someone could give me a hand with problems i'm having after installing CM11 on GT-S5670.
Phone was bought from serbian MTS operator and is locked just for that one.
Previously (few years ago) i installed CM7 and it was working fine.
Today i have installed :
CWM-6.0.5.3
cm-11.0.0-RC14
and
mini-gapps-cm11-20140317-signed
I have done all wipes as said in instruction, when phone started, in initial settings i had first problem, there was no keyboard to enter wi-fi and google account data, i skipped all settings and when it actually started i missed both keys left and right from HOME and as allready said there is no keyboard.
I must say that both buttons work in CWM
Click to expand...
Click to collapse
It is because of the gapps you're using. Don't flash gapps on cm11, the device can't handle so much. If you must,try pico gapps from PA
CPU overclock
Harpratap said:
It is because of the gapps you're using. Don't flash gapps on cm11, the device can't handle so much. If you must,try pico gapps from PA
Click to expand...
Click to collapse
Hi i use cm-11.0.0-RC14-GT-S5670-beni.zip latest cm11 on galaxy fit and i want to overclock cpu but when i set max frequency to 806Mhz and smartassv2 governor the phone always freezes and i need to remove battery and reboot so can you tell me your settings and what governor and I/O scheduler you use? Thanks!
Can't install cm11 OTA RC14
Hi guys,
I'm trying to install the ota version, but CWM (6.0.5.3) replied me with an error 7 status code... How can I do in order to resolve this issue? Thanks in advance.
Antonio GT-I8730T said:
Hi i use cm-11.0.0-RC14-GT-S5670-beni.zip latest cm11 on galaxy fit and i want to overclock cpu but when i set max frequency to 806Mhz and smartassv2 governor the phone always freezes and i need to remove battery and reboot so can you tell me your settings and what governor and I/O scheduler you use? Thanks!
Click to expand...
Click to collapse
Overclocking varies from device to device, mine supports 806 and above easily. Your mileage may vary, try something between 729 and 787MHz. Although, I do not notice any improvements beyond 748Mhz.
GiuX89 said:
Hi guys,
I'm trying to install the ota version, but CWM (6.0.5.3) replied me with an error 7 status code... How can I do in order to resolve this issue? Thanks in advance.
Click to expand...
Click to collapse
Zip might be corrupted? Tried verifying using md5?
Or try looking for a Hardware TLS recovery for fit.
Harpratap said:
Overclocking varies from device to device, mine supports 806 and above easily. Your mileage may vary, try something between 729 and 787MHz. Although, I do not notice any improvements beyond 748Mhz.
Zip might be corrupted? Tried verifying using md5?
Or try looking for a Hardware TLS recovery for fit.
Click to expand...
Click to collapse
Zip verified, and I'm using CWM 6.0.5.3 for flashing, that said had to solve this issue, I've tried to modify the updater-script too removing the assert but anything, it return me "installation aborted"...
GiuX89 said:
Zip verified, and I'm using CWM 6.0.5.3 for flashing, that said had to solve this issue, I've tried to modify the updater-script too removing the assert but anything, it return me "installation aborted"...
Click to expand...
Click to collapse
I've resolved with a manual formattation of /system partition... wipe data it's not enough...
So it seems like it got final now http://download.androidarmv6.org/_builds/beni/stable/
i installed it but i get AOSP Keyboard stopped Error every time. how can i fix that?
rillrill said:
So it seems like it got final now http://download.androidarmv6.org/_builds/beni/stable/
i installed it but i get AOSP Keyboard stopped Error every time. how can i fix that?
Click to expand...
Click to collapse
you need fist install other roms for example hdv3 or toucwiz rom after that install cm11 all it is ok
ahmetakin said:
you need fist install other roms for example hdv3 or toucwiz rom after that install cm11 all it is ok
Click to expand...
Click to collapse
Does that still apply, if i tried all the older cm11 nightly builds months before (without any problems, besides that strange battery drain/adjustment) ?
Themes !
is the theme chooser working !
'coz i tried to install a couple of themes but couldn't apply them !
any help @yajnab?
Final version (non-RC) of CM11 for S5670: https://dl.dropboxusercontent.com/u/18414425/cm-11.0.0-GT-S5670-beni.zip
DATA connection problem....
Hiiiii Yanjab,
i am totally new to xda and CM11,,just joined a month or so ,,, and this is my first post,,,, but i flashed my GT S5670 with your CM11 kitkat... let me tell you its awesome and everything works just fine ... THANK YOU....... but except for the INTERNET. I did a wipe data and cache format and wipe Dalvik cache .. after that my net worked for that boot... but after that when i rebooted.... again No internet connection. I wanted to know is there a way to solve the problem or i have to do a wipe data and cache everytime i start..!!!! it would be a very lengthy process soo......
and please can you give a link for Gapps (compatible with FIT 5670)...
and How and from where can i download themes for CM11..
(and i am also willing to learn how to develop ROMs can you give links to resources plz...)
Thanks in ADVANCE!!!!
help status 0 error
on trying to flash i get error installation aborted status 0
aliasgermhow said:
on trying to flash i get error installation aborted status 0
Click to expand...
Click to collapse
Flash this recovery and it will work http://vk.com/doc181863617_334151890?hash=9a16e95ab32d0a7f58&dl=ab1795143261fdb411;)
Use this thread =>http://goo.gl/wBvUGq for questions or discussions.
Only Bug Reports & Feedbacks are allowed here. Penalty: Post Removal by Moderators
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
ROM Downloads
<< Nightly >>
Download Folder: https://archive.org/download/cmarchive_nighlies/
<< Misc. (Modem & Recovery) >>
I9500XXUHOD4 LL Modem: https://basketbuild.com/filedl/devs...s And Bootloaders/I9500-XXUHOD4-MODEM_CWM.zip <= Recommended
Google Apps (add-on)
http://forum.xda-developers.com/android/software/tk-gapps-t3116347 <== Recommended <> Micro/Mini Modular Package. Do not choose Stock
Installation
3-button-combo = "Volume Up/+" + "Home/Center" + "Power/Lock"
- First time flashing CM12.1 to your Galaxy S4 (or coming from TouchWiz/Stock Based ROMs)?
Root your device and install GearRecovery/TWRP
Reboot into Recovery using 3-button-combo
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)
Install the ROM from internal/external sdcard
Optionally install Google Addon
Done! You can now reboot the phone to enjoy the rom
- Upgrading from Official CM10.2/CM11/CM12 or GearCM 11/12/12.1?
Reboot into Recovery using 3-button-combo
Do a Nandroid Backup!
Install latest GearRecovery/TWRP
Reboot into new Recovery using 3-button-combo (if needed)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)
Install the ROM from internal/external sdcard
Optionally install the Google Addon
Done! You can now reboot the phone to enjoy the rom
- Upgrading from another build of CM12.1?
Reboot into Recovery using 3-button-combo
Do a Nandroid Backup!
Install latest GearRecovery/TWRP
Reboot into new Recovery using 3-button-combo (if needed)
Install the ROM from internal/external sdcard
WIPE Dalvik/ART Cache (wipe cache partition + wipe dalvik cache)
Done! You can now reboot the phone to enjoy the rom
Known Issues (regarding latest/upcoming Nightly build)
Please do not report bugs if it is already listen in the list of known issues
Microphone volumes need to be recalibrated. (e.g. Sound Recorder records audio files with too low audio and bad quality)
Some VOIP apps don't route audio properly with actual Audio HAL, so you won't hear anything. (seems Audio HAL bug)
Bluetooth SCO is a bit unstable, sometimes you need to switch between Speaker/Headset/Earpiece & Bluetooth to properly configure the output device. (Audio HAL bug)
Open-Source HW Video Encoders have a bug with Video Bitrate. Video Recorded using Camcorder will have low quality. (actually the only solution is to use prebuilt OMX libraries. Use the whole /system/lib/omx folder & /system/lib/libExynosOMX_Core.so lib. from LL Stock ROM)
5GHz Wi-Fi Networks using Band B (52-140) and Band C (149-161) channels don't get listed. (WiFi Config. bug)
Google's Voice Recognition causes some weird issues with Audio HAL. (Audio HAL bug. Disable it to avoid issues)
IR Blaster doesn't work. (Kernel bug)
Device Encryption doesn't work. (Device Tree bug)
Rarely, when you wake-up the device, touchscreen will have a noticeable input lag, easily fixable by turning off and on the display. (H/W or S/W bug?)
Any Chinese (CHN, I9500ZCUxxx codename) Baseband/Modem reduces Call Quality. (due to forced AMR_WB, unsupported by CHN modems)
Wireless Display with some TVs could cause issues. (AOSP bug related to HDCP, and Google doesn't provide a solution)
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow. Note: If you can provide the latest night/build that the bug didn't exist, it would greatly help in tracking down what caused it.
Code:
What is your--
Phone model:
Radio (baseband) version:
CM version:
CM download url:
Google Apps version:
Did you--
wipe data/factory reset:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance Settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Changelog
http://www.cmxlog.com/12.1/i9500/
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[OFFICIAL][i9500][5.1.x] CyanogenMod 12.1 for Samsung Galaxy S4, ROM for the Samsung Galaxy S4
Contributors
Alberto96, intervigil
Source Code: https://github.com/CyanogenMod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2015-08-16
Last Updated 2017-02-09
Reserved
Reserved
Great , finally the official version good going bud.
nice one
Finally Official Build starts to come
How does charging works with switched off device?
wifi does not connect
Hi, wifi is broken.
What is cm-12.1-20150816-NIGHTLY-i9500-recovery.img?
crisis_trustee said:
What is cm-12.1-20150816-NIGHTLY-i9500-recovery.img?
Click to expand...
Click to collapse
That is CM's official recovery.
Thanks
Been waiting for the official Rom for SOOO LONG.
I will install once the WiFi issue is fixed. I am hoping the battery life is good
Keep up the good work ^_^
LeoYL said:
That is CM's official recovery.
Click to expand...
Click to collapse
Is it TWRP recovery?
no issues with Wifi. But camera still not working. Is everyone experiencing this?
justinemat said:
no issues with Wifi. But camera still not working. Is everyone experiencing this?
Click to expand...
Click to collapse
Read in 4pda that problem with camera caused by using opengapps. Try this one, maybe will help:
http://forum.xda-developers.com/android/apps-games/hdpi-google-apps-5-1-t3066172
Yeah unfortunately also having WiFi connecting issues. Connects to open networks but not wpa secured ones.
Salvation for our device.
The official version finally comes. :highfive:
Very thanks.
First boot (wiped everything): cant connect to the camera
All Hope is Gone
bornlivedie said:
First boot (wiped everything): cant connect to the camera
All Hope is Gone
Click to expand...
Click to collapse
For now you could use GEARCM by @Alberto96. Everything seems to work fine including camera.
http://forum.xda-developers.com/galaxy-s4/i9500-orig-develop/gearcm-optimized-cyanogenmod-12-1-t3091958
justinemat said:
For now you could use GEARCM by @Alberto96. Everything seems to work fine including camera.
http://forum.xda-developers.com/galaxy-s4/i9500-orig-develop/gearcm-optimized-cyanogenmod-12-1-t3091958
Click to expand...
Click to collapse
This is also from Alberto96, but isn't working yet. He said that this build has problems but if he create this thread its means that all bugs are fixed. But it's not the case.
Hopefully he is working on it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DotOS 1.2 (Based on Nougat 7.1.2) for Nexus 7 2012 (grouper)
DISCLAIMER
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ROM INFO
This is unofficial source-built DotOS for Nexus 7 2012 (grouper).
....
Yes, just simple as that. Get ready to #AlignTheDots !
ROM FEATURES
C'mon, you should discover it yourself! Flash it and play with your buddy!
ROM BUGS
Code:
- Camera : Shots are pixelated
- Gallery : Thumbnails' color is sort of like gone haywire :3 (tbc)
ROM INSTALLATION
*NEW USERS: Unlock bootloader and flash latest TWRP using fastboot
1. Boot into TWRP (Power + Volume Down > Select Recovery Mode)
2. If clean flash, wipe /data, /cache, /system
3. If you'd like to have f2fs, format /data (your internal SD content will be lost!) and /cache to f2fs.
4. Proceed into flashing ROM (install ZIP or sideload)
5. Proceed into flashing other ZIPs if any.
6. Reboot system. First boot takes about 10-15 minutes. Be patient
SIDE NOTES
- If you were to install GAPPS, well... I did say that you'll have to figure it out on your own.
- Builds are rootless, you have the option to install Magisk on your own.
- Builds are not tested on Nexus 7 2012 3G variant. I doubt if they work anyway.
- Signature Spoofing support is yet to be added :3
SOURCES
Full credits to @AndDiSa (device sources), @Ziyan (Unlegacy Android), DotOS, LineageOS, long-lived CyanogenMod, and other Nexus 7/Tegra3 developers.
https://github.com/leewp14/local_manifests
XDA:DevDB Information
[ROM] [UNOFFICIAL] DotOS 1.2 - grouper, ROM for the Nexus 7
Contributors
lee.wp14, AndDiSa, Ziyann
Source Code: https://github.com/leewp14
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: TWRP 3.x
Version Information
Status: Testing
Created 2019-01-04
Last Updated 2019-01-03
DOWNLOADS
Builds are uploaded to my Google Drive. Click here to access.
Look under directory : grouper > dot
*DO NOT MIRROR WITHOUT MY PERMISSION. Thank you.
CHANGELOG
Code:
[U][B]20190103[/B][/U]
- Initial build
I will only write changelog for tested working builds :good: try at your own risk if you want to test it before me :3
Those inside .trash folder are my test builds. Please, avoid this folder and other no changelog written build if you want to play safe. Thanks
SCREENSHOTS
Attached to this post...
nice to see new roms to test, donwloading now!
Nice rom, but without play store Is useless. Secure patch are old, i Hope you Will update. For play store i tried to install with magisk,with open gapps (gapps-config) and manual but nothing. Dt2w work , battery Life is good(i would to try with store).anyway thanks for keep alive this old Beast.
Rom doesn't keep app permission (i Always give storage permission to kiwi browser for download apks)
TureX said:
Nice rom, but without play store Is useless. Secure patch are old, i Hope you Will update. For play store i tried to install with magisk,with open gapps (gapps-config) and manual but nothing. Dt2w work , battery Life is good(i would to try with store).anyway thanks for keep alive this old Beast.
Rom doesn't keep app permission (i Always give storage permission to kiwi browser for download apks)
Click to expand...
Click to collapse
I will look into that soon.
I have quite a number of stuffs coming up these weeks, thus will put this aside first.
For GAPPS, I still yet to try install GAPPS, thus I wrote that you guys are to figure it out on your own . But as a tip for you, previously when I'm using RR Nougat, I removed a lot of foreign fonts, TTS files, sound media files, and was able to get pico opengapps installed successfully (I didn't use gapps-config anyway).
As a suggestion, you can also try to have the GMSCore installed as user app (in /data partition). During the days when I'm using Samsung Galaxy Ace, we used to have the GMSCore installed on /data.
@TureX I can't reproduce your problem regarding app permissions. Can you reconfirm this? I've tried Kiwi Browser from Play Store too.
lee.wp14 said:
@TureX I can't reproduce your problem regarding app permissions. Can you reconfirm this? I've tried Kiwi Browser from Play Store too.
Click to expand...
Click to collapse
Hi, thanks for your reply. Now i can't reproduce cause i format the tablet, maybe was corrupted my installation that cause that issue. Sorry for my bad English.
Development discontinued
Was quite busy lately, didn't even have time to relax browsing on the nexus.
Few days ago left my Nexus 7 aside in my book rack after fully charged. That time I have personal modified gapps installation installed.
Not sure if is my gapps configuration is not proper, it caused the tablet to overheat. I just noticed it when back home from work at night. So literally GMSCore is using my cpu for the whole day (surprisingly not wakelocking). Whole tablet hot as f*.
Left it charge, the next day after unplugged, using it for few minutes, then sudden blank. Cannot even charge. Total dead.
Suddenly yesterday it boots, but has symptoms of emmc failure (as I recall it now). That time not sure what happened, not even have time to look on it.
Today finally back home early, can check on it. Factory reset 2 times all sudden reboot when wipe. Highly confident is emmc failure. Try flash stock, write failed when flashing bootloader. Baam, Nexus 7 is total dead again.
Will try to reheat the chip and see if it revives, as the overheating seems to be the culprit. If not, then it's an end for Nexus 7's DotOS :| so sad :crying:
Thanks guys. Development will be halted for the time being.
lee.wp14 said:
Was quite busy lately, didn't even have time to relax browsing on the nexus.
Few days ago left my Nexus 7 aside in my book rack after fully charged. That time I have personal modified gapps installation installed.
Not sure if is my gapps configuration is not proper, it caused the tablet to overheat. I just noticed it when back home from work at night. So literally GMSCore is using my cpu for the whole day (surprisingly not wakelocking). Whole tablet hot as f*.
Left it charge, the next day after unplugged, using it for few minutes, then sudden blank. Cannot even charge. Total dead.
Suddenly yesterday it boots, but has symptoms of emmc failure (as I recall it now). That time not sure what happened, not even have time to look on it.
Today finally back home early, can check on it. Factory reset 2 times all sudden reboot when wipe. Highly confident is emmc failure. Try flash stock, write failed when flashing bootloader. Baam, Nexus 7 is total dead again.
Will try to reheat the chip and see if it revives, as the overheating seems to be the culprit. If not, then it's an end for Nexus 7's DotOS :| so sad :crying:
Thanks guys. Development will be halted for the time being.
Click to expand...
Click to collapse
Dude if its the motherboard that is broken I can send you another one free of charge if you live in the united states because I have 5 of them
JT1510365 said:
Dude if its the motherboard that is broken I can send you another one free of charge if you live in the united states because I have 5 of them
Click to expand...
Click to collapse
Wow, that's quite a lot of them! But thanks, I've decided to continue building for Samsung Note 1 only. As I rarely use my Nexus 7 (in fact I didn't bought it but I get it free from someone).
Thanks for your kind offer anyway!
lee.wp14 said:
Wow, that's quite a lot of them! But thanks, I've decided to continue building for Samsung Note 1 only. As I rarely use my Nexus 7 (in fact I didn't bought it but I get it free from someone).
Thanks for your kind offer anyway!
Click to expand...
Click to collapse
Switching motherboards takes like 5 minutes and is a simple task! Just saying because 6 month ago when mine broke due to the emmc bug and I paid around 25 Euros for another one (even was a 32GB from Hynix)...
So think twice about this offering!
Sorry for off topic discussion and have a great day!
Sent from my Nexus 7 using XDA Labs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ubuntu Touch
First things first, this rom is not android based and this build is in pre-alpha stage, in short it's not meant to be your daily driver, you may face many bugs..
Ubuntu Touch (also known as Ubuntu Phone) is a mobile version of the Ubuntu operating system that was originally developed by Canonical Ltd. and is now being developed by the UBports community.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Features
[URL] https://github.com/ubports/porting-notes/wiki/Xiaomi-Redmi-Note-4(X)-(xiaomi-mido)[/URL]
Credits
In the beginning I would like to thank:
Ubports community
LineageOS community
Canonical
@Herrie82
@Flohack
@Shakendo
@walid
@notkit
@RealDanct2
Team
@gopikrishnanrmg(Win32_downdadup)
Downloads
Pre-Alpha Release Version 1.0
Download link: https://www.mediafire.com/file/w6qccgtubcc7uq5/Ubuntu-Touch-mido(Pre-Alpha).zip/file
Pre-Alpha Release Version 1.1
Download link: http://www.mediafire.com/file/cgyqxk6wgy60yhz/Ubuntu-Touch-mido%28Pre-Alpha_V1.1%29.zip/file
Alpha Release Version 1.0
Download link: http://www.mediafire.com/file/dj68d53sg0loprz/Ubuntu-Touch-mido%28Alpha_V1.0%29.zip/file
Alpha Release Version 1.1
Download link: https://www.mediafire.com/file/52vgjns7dktx7if/Ubuntu-Touch-mido(Alpha_V1.1).zip/file
Changelogs
[Pre-alpha]V1.0
WIFI is fixed
Bluetooth is fixed
Tethering is fixed
GPS is fixed
Media sound is fixed
[Pre-alpha]V1.1
Calls issue is fixed
Scaling is fixed
Power button bug fixed
[Alpha]V1.0
Camera is fixed (only snapshots no video)
Anbox is fixed (Instructions https://github.com/ubports-mido/android_kernel_xiaomi_msm8953/pull/2)
Alarm is fixed
Loudspeaker in calls bug is fixed
Time keeping between reboots is fixed
And many more ....
[Alpha]V1.1
Temporary Fix for torch
Media decoding for videoplay (To fix this, open terminal and run : sudo mount -o remount,rw / and then
enter password, default it is "a" without quotes. Now run sudo apt update and
finally run sudo apt install gstreamer1.0-libav, enter Y upon prompt. Reboot and
open video from mediaplayer app)
More fixes and versions upcoming
Upcoming Fixes And Features
Fixes
Screenshots
I couldn't add the screens directly as there were some scaling issues, please bear with me
https://www.mediafire.com/convkey/2048/e9azzbg0ehqm9ohzg.jpg
http://www.mediafire.com/view/at76fk07w913exz/IMG_20200320_181101.jpg
https://www.mediafire.com/view/gnp05qiyrbu8kw3/IMG_20200330_190516.jpg
https://www.mediafire.com/view/pfysyoi84gzx2bc/1.png
https://www.mediafire.com/view/9qyfjgtx24csr66/4.png
https://www.mediafire.com/view/j3rz14v85r920bl/2.png
https://www.mediafire.com/view/da9eytfeat1pixo/6.png
https://www.mediafire.com/view/sszaqxtby49zwkd/5.png
Issues
https://github.com/ubports/porting-notes/wiki/Xiaomi-Redmi-Note-4(X)-(xiaomi-mido)
Note: The reason I didn't fix these and post the ROM was because of demand by some users to try out the ROM, these issues will be fixed in the later builds
Instructions
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Boot to recovery (TWRP recommended).
2. Wipe the System, Cache, and Data (and format the data partition!).
3. Download the ROM and transfer it to your device.
4. Flash the ROM Zipfile.
5. Reboot your device.
6. A password prompt may come once its started and the password is "a" , you can change the password using the terminal, typing "passwd" and change the password (as in any Linux system)
Sources
https://github.com/ubports/porting-notes/wiki/Xiaomi-Redmi-Note-4(X)-(xiaomi-mido)
[Sources link at the bottom of the above page]
XDA:DevDB Information
Ubports-Mido, ROM for the Xiaomi Redmi Note 4
Contributors
gopikrishnanrmg, jodev
Source Code: https://github.com/ubports-mido
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
Based On: Lineage OS
Version Information
Status: Alpha
Created 2020-03-20
Last Updated 2020-06-20
great. screenshots please
xcosby said:
great. screenshots please
Click to expand...
Click to collapse
There was a scaling issue it seems, so i could only upload the links to the images, sorry for that
Fantastic. Will be keeping my eye on this one. This project and PureOS are a refreshing break from the Android ecosystem.
Just installed. Everything seems to work besides listed issues.
cidxtc said:
Just installed. Everything seems to work besides listed issues.
Click to expand...
Click to collapse
Thanks for testing
Mycroft2046 said:
Fantastic. Will be keeping my eye on this one. This project and PureOS are a refreshing break from the Android ecosystem.
Click to expand...
Click to collapse
Thank you
Mycroft2046 said:
Fantastic. Will be keeping my eye on this one. This project and PureOS are a refreshing break from the Android ecosystem.
Click to expand...
Click to collapse
Me too. Thanks OP for this!
FMAranda said:
Me too. Thanks OP for this!
Click to expand...
Click to collapse
Thank you too
try to install. but get error on mounting data partition even seems its mounted . try official latest TWRP,redmwolf and orange fox. same problem.
any advices?
btw, im comig from PE android 10. now device unable too boot. only twrp and fastboot
kayrowl91 said:
try to install. but get error on mounting data partition even seems its mounted . try official latest TWRP,redmwolf and orange fox. same problem.
any advices?
btw, im comig from PE android 10. now device unable too boot. only twrp and fastboot
Click to expand...
Click to collapse
It will show the error about data partition and also show no OS installed, did you try to reboot after flashing? Also do format and wipe system, data, dalvik and cache (not just wipe). I used twrp. The errors are normal, It should boot to Ubuntu touch
want to install but i dont have wifi at home XD next time maybe dev
ty before
DiamondxUnicorn said:
want to install but i dont have wifi at home XD next time maybe dev
ty before
Click to expand...
Click to collapse
Welcome
Great news to be able to use ubuntu touch in mido I will try to see how it goes although I know it is a pre-alpha version
Nice! Everything works good a part from listed issue! This is so good, do you think I can use it with DualBootPatcher?
Thanks! Works fine for me.
sterzo7 said:
Nice! Everything works good a part from listed issue! This is so good, do you think I can use it with DualBootPatcher?
Click to expand...
Click to collapse
Didn't try it yet... There are lot more perfections to be made
Dean27 said:
Great news to be able to use ubuntu touch in mido I will try to see how it goes although I know it is a pre-alpha version
Click to expand...
Click to collapse
Thank you
Juby210 said:
Thanks! Works fine for me.
Click to expand...
Click to collapse
Happy to know
Thanks for the port bro! It works well!
However, when i compiled your code from 'ubports-mido' (Dev Branch). I am not able to boot. It crashes once and then on reboot, it gets stuck at ubuntu loading logo. May I kindly know which branch you use for device, kernel and vendor? Any other specific instructions to build?
I would love to contribute!
In between, the device gets mis-recognized as desktop, instead of handset. Because a configuration file in '/etc/ubuntu-touch-session.d/mido.conf' is missing. Creating it with following values:
GRID_UNIT_PX=22
QTWEBKIT_DPR=2.3
NATIVE_ORIENTATION=portrait
FORM_FACTOR=handset
Click to expand...
Click to collapse
fixes the display scaling issues.
You can also integrate this in the ubuntu folder in device tree itself to fix the issue. Maybe I can create a pull request?
Last, Where can we create issue and track them? It would be nice if you could enable Github Issues for this project 'ubports-mido/android_device_xiaomi_mido' maybe?
Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.
In short a fully functional Pixel Experience with just the right amount of essentials.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Improvements over PixelExperience
Performance improvements from ProtonAOSP
Reduced log spam verbosity
Android 12 style 4G/LTE icons
Add/remove QS with one click
Increased UI responsiveness
Optimized Night Light
Per app network restrictions
Annoying notifications
Three-fingers-swipe to screenshot
Double tap to sleep on lockscreen
Double tap to sleep on statusbar
Volume key music control
Extended Monet implementation to more UI elements
Simple RGB color balance transform sliders
More font size in 5% steps from 80% to 130%
First-class implementation of Repainter app
Under the hood optimizations
Requirements
Realme UI 1.0 FW
Downloads
Get the latest PixelOS Build for RMX2020 Download
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
Recovery https://pitchblackrecovery.com/rmx2020/
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/RMX2020/recovery/
Note: GApps are included, don't flash separately.
Notes
• Encryption is enabled by default
• SELinux is enforcing
• (?) Supports Realme UI 1.0 fw only
• (?) NEOLIT Kernel included
PixelOS Recovery is recommended if you want to stay encrypted, no custom recovery supports encryption on Android12, i.e. you won't be able to decrypt your data.Flashing Instructions
Clean flash (coming from a different ROM):
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Wipe cache and dalvik (optional, recommended)
• Reboot and voila!
Join our Telegram Group https://t.me/PixelOSChat
Source Code
PixelOS http://github.com/PixelOS-Pixelish
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/PixelOS-Devices/kernel_realme_RMX2020
ROM OS Version: Android 12.1.
ROM Kernel: Linux 4.14.x
Stable Release Date: 04 April 2022
Latest Release Date: 04 April 2022
I have a custom rom installed on my realme C3 device, Can I directly install pixelos on it ,or should i revert back to rmui ?
Everything fine..
How much storage will the system memory take?
How's the battery life in comparison to stock? I keep going back from cfw to stock since the battery life is so much better. Thanks
I actually installed this, and my phone does not reboot after I set it up after first boot, so I messed up for my first custom ROM on my phone. Used another android 12 custom rom (arrow OS) just to boot up my phone. So for me to got back into pixel os without any error in reflashing it, by flashing arrow OS first, clear caches, and then flash pixel os. And the error doesn't appear as the flashing goes on. And so far, no issues whatsoever. The rom itself is optimized, even when I force adopt my sd card, it goes so well. Big thank you for this.
Ps. I rooted pixel os just by installing the apk, patching the boot.img of pixel os, flash it to recovery, reboot and direct install of magisk
hdt25 said:
I have a custom rom installed on my realme C3 device, Can I directly install pixelos on it ,or should i revert back to rmui ?
Click to expand...
Click to collapse
You need to revert back to rmui1.0 first before you proceed flashing pixel os
Hi, I have an AU prepaid ( optus ) c3 OV, can I install this on the phone?
For those who have a problems in excessive heating during charging after using otg, disable the otg at realme settings of this rom. This should fix the overheating of the phone. Since the otg in pixel os doesn't have a mechanism to turn off itself, you should manually disable it once you used this feature
This ROM is simply awesome. Thanks @sarthakroy2002 for this, this has literally transformed this phone into something actually useful. Question: what's the cabc display option about?
jacoghi said:
This ROM is simply awesome. Thanks @sarthakroy2002 for this, this has literally transformed this phone into something actually useful. Question: what's the cabc display option about?
Click to expand...
Click to collapse
CABC is a stock realme feature... It means Content based battery consumption... It is very useful.
sarthakroy2002 said:
CABC is a stock realme feature... It means Content based battery consumption... It is very useful.
Click to expand...
Click to collapse
Thanks for the explanation, I'm assuming leaving it enabled is for the best, then. Any plans on building Lineage 19.1 with your trees? Thanks again for the awesome work, rom working perfectly so far.
How can i turn off the phone by double tapping home screen? btw nice rom this is good i can use this as daily driver but sometimes when i use the switch button (3 navigation) its automatically switching app, it's also stuttering when scrolling in some apps but thats ok because i only have 3gb ram. Performance issues in youtube and is some cases.
@sarthakroy2002, There seems to be some inconsistency between this little script that comes in the packages called dynamic_partition_op_list. The system_ext in the ArrowOS 12.1 package is resized to a much larger size, actually almost double what the PixelOS system_ext is resized to, even though the compressed package is much smaller than PixelOS'.
The other thing is that apparently the wakelocks in the roms seem to stem from this stp_dump process, apparently mediatek related (logger ?) getting a permission denied that keeps going forever. Seems to be at a system level? Is that something that can be addressed through SEPolicy?
Thanks again for the great work,
jacoghi said:
@sarthakroy2002, There seems to be some inconsistency between this little script that comes in the packages called dynamic_partition_op_list. The system_ext in the ArrowOS 12.1 package is resized to a much larger size, actually almost double what the PixelOS system_ext is resized to, even though the compressed package is much smaller than PixelOS'.
The other thing is that apparently the wakelocks in the roms seem to stem from this stp_dump process, apparently mediatek related (logger ?) getting a permission denied that keeps going forever. Seems to be at a system level? Is that something that can be addressed through SEPolicy?
Thanks again for the great work,
Click to expand...
Click to collapse
Just use my latest TWRP released in TG channel... Also the stp_dump isnt granted permission to work.... I will look into the logspams soon
Sorry for my ignorance, man, what telegram channel are we talking about? Pixeloschat? Cause I couldn't find anything there. Ok, just found your sourceforge repo, I'm assuming it's that twrp you meant before. Yeah, it sure about the permissions themselves but the binary is running, killing it simply restarts the process so I couldn't test if that's the real root of the wakelock, but everything points to it. Thanks again,
will banking apps and Netflix work?
@Radheykalra As long as you don't root it, yes. Some apps don't work even with magiskhide. Netflix always works rooted or not, you just need to sideload it. Obviously no Widevine L1 so no FHD.
@sarthakroy2002, some interesting findings: the wakelock ratio which during normal idle times is 55/45 (deep sleep / awake with the screen off)goes down to 95/5 when the battery is below 15%. No battery saver turned on at all, no change on the system itself, exact same usage. Some internal process is triggering that change in behavior with the 15% thresold. Hope that helps fixing it. By the way, I changed to your build of Lineage to double check and the behavior is exactly the same.
jacoghi said:
@Radheykalra As long as you don't root it, yes. Some apps don't work even with magiskhide. Netflix always works rooted or not, you just need to sideload it. Obviously no Widevine L1 so no FHD.
Click to expand...
Click to collapse
Do u have any idea how to get hd audio to work (LDAC ) to work, it was working on realme ui and now it's greyed out