Hi all! I have a bricked HTC Sensation 4G (T-Mobile) that I am trying to fix.
I need help with RUUing the HTC Sensation 4G. (Z710e)
I believe I have tried everything, all without luck, please help, TIA.
Heres the problem with the phone- It appears to be stuck in a bootloop, boots up to the white HTC screen, makes the HTC startup chime with Quietly Brilliant written under it, and then immediately reboots, and continuously does this over and over again.
Heres what I know about the phone
The Bootloader is Locked
The Phone is S-ON
The CID of the phone is HTC__621
Here's what I've tried
I have tried RUUing the phone with RUU_PYRAMID_ICS_TMOUS_3.32.531.14_Radio_11.69A.3504.00U_11.23.3504.07_M2_release_256085_signed.exe
since it is a T-Mobile HTC Sensation 4G. However I keep getting Error 130: Model ID error.
I also tried RUUing the phone manually using CMD, following the guide however this failed aswell, I kept getting "remote: 12 signature verify fail" at the end.
I also tried renaming extracting the rom.zip from the RUU, renaming that to PG58IMG.zip, placing that on my sd card and booting the phone into bootloader. However when I tried this it said checking PG158.img, but nothing happened, it just continued to boot up to the bootloader.
At this point I realized maybe that this RUU didn't match my CID, which was why it was failing. So I tried opening the ROM.zip file however it said it was corrupt in windows explorer. I then tried redownloading the RUU but it still kept saying ROM.zip was corrupt. I then opening ROM.zip with winrar and it opened up! I then opened android-info.text and saw that the cidnum for the RUU was T-MOB0101. I tried changing this to my CID (HTC__621) and then saving as instructed in this guide, however when I pressed on YES to update the files in the archive, winrar gives an error and says that the archive is corrupt, and does not update android-info.text.
I am not sure what else to try at this point, and I am stumped as to why none of the following methods I've tried worked. Is there something I am doing wrong? Is there anything I'm missing? Any help would be very gladly appreciated, as I am out of ideas.
Also worth noting, I've attached 2 pictures below as attachements to this post, (since I am new to xdadevelopers I cannot post direct links to images), one of the bootloader of the phone, including information such as my hboot version, radio version, etc. in case its needed.
I've also attached a picture below of what happens when I put the phone into HTC stock android recovery and press Factory Data Wipe/Reset. I get a bunch of errors, I'm not sure if this is related to anything but it doesn't look normal, so I attached a picture of it below.
Thanks in advance!
sebzter said:
Hi all! I have a bricked HTC Sensation 4G (T-Mobile) that I am trying to fix.
I need help with RUUing the HTC Sensation 4G. (Z710e)
I believe I have tried everything, all without luck, please help, TIA.
Heres the problem with the phone- It appears to be stuck in a bootloop, boots up to the white HTC screen, makes the HTC startup chime with Quietly Brilliant written under it, and then immediately reboots, and continuously does this over and over again.
Heres what I know about the phone
The Bootloader is Locked
The Phone is S-ON
The CID of the phone is HTC__621
Here's what I've tried
I have tried RUUing the phone with RUU_PYRAMID_ICS_TMOUS_3.32.531.14_Radio_11.69A.3504.00U_11.23.3504.07_M2_release_256085_signed.exe
since it is a T-Mobile HTC Sensation 4G. However I keep getting Error 130: Model ID error.
I also tried RUUing the phone manually using CMD, following the guide however this failed aswell, I kept getting "remote: 12 signature verify fail" at the end.
I also tried renaming extracting the rom.zip from the RUU, renaming that to PG58IMG.zip, placing that on my sd card and booting the phone into bootloader. However when I tried this it said checking PG158.img, but nothing happened, it just continued to boot up to the bootloader.
At this point I realized maybe that this RUU didn't match my CID, which was why it was failing. So I tried opening the ROM.zip file however it said it was corrupt in windows explorer. I then tried redownloading the RUU but it still kept saying ROM.zip was corrupt. I then opening ROM.zip with winrar and it opened up! I then opened android-info.text and saw that the cidnum for the RUU was T-MOB0101. I tried changing this to my CID (HTC__621) and then saving as instructed in this guide, however when I pressed on YES to update the files in the archive, winrar gives an error and says that the archive is corrupt, and does not update android-info.text.
I am not sure what else to try at this point, and I am stumped as to why none of the following methods I've tried worked. Is there something I am doing wrong? Is there anything I'm missing? Any help would be very gladly appreciated, as I am out of ideas.
Also worth noting, I've attached 2 pictures below as attachements to this post, (since I am new to xdadevelopers I cannot post direct links to images), one of the bootloader of the phone, including information such as my hboot version, radio version, etc. in case its needed.
I've also attached a picture below of what happens when I put the phone into HTC stock android recovery and press Factory Data Wipe/Reset. I get a bunch of errors, I'm not sure if this is related to anything but it doesn't look normal, so I attached a picture of it below.
Thanks in advance!
Click to expand...
Click to collapse
You can access bootloader so no problems here. Unlock bootloader through htcdev. In fastboot mode flash latest 4ext recovery, enable smartflash in settings, then flash a custom rom. You can also try Android Revolution HD rom if you prefer a stock look.
matekaneve said:
You can access bootloader so no problems here. Unlock bootloader through htcdev. In fastboot mode flash latest 4ext recovery, enable smartflash in settings, then flash a custom rom. You can also try Android Revolution HD rom if you prefer a stock look.
Click to expand...
Click to collapse
Thanks for the info! However I just tried unlocking the bootloader through htcdev but I keep getting an error at the end "Unlock token check failed". You can see this in the picture I attached below of the command prompt window. Any ideas? I tried resubmitting my unlock token on htcdev to make sure I didn't leave any extra spaces or anything but still got the same result. Thanks
sebzter said:
Thanks for the info! However I just tried unlocking the bootloader through htcdev but I keep getting an error at the end "Unlock token check failed". You can see this in the picture I attached below of the command prompt window. Any ideas? I tried resubmitting my unlock token on htcdev to make sure I didn't leave any extra spaces or anything but still got the same result. Thanks
Click to expand...
Click to collapse
Strange... Make sure you copy and paste right from the beginning to the end. You can also try to move your adb/fastboot folder somewhere else for example to the desktop and try resubmitting the token from there. (Might sound stupid but works sometimes). If not, you need to find the right RUU for your device and RUU it, then follow this guide for s-off: http://forum.xda-developers.com/showthread.php?p=26280760 there are some devices htcdev unlock doesn't work unfortunately... Otherwise I have no other idea, sorry. Somebody might be able to help.
matekaneve said:
Strange... Make sure you copy and paste right from the beginning to the end. You can also try to move your adb/fastboot folder somewhere else for example to the desktop and try resubmitting the token from there. (Might sound stupid but works sometimes). If not, you need to find the right RUU for your device and RUU it, then follow this guide for s-off: http://forum.xda-developers.com/showthread.php?p=26280760 there are some devices htcdev unlock doesn't work unfortunately... Otherwise I have no other idea, sorry. Somebody might be able to help.
Click to expand...
Click to collapse
Thanks again for your response, I just did it again this time with my fastboot folder on the desktop, however I still got the same error. How would I find the right RUU for my device? It is an american HTC Sensation 4G from T-Mobile with its CID: HTC__621. I haven't been able to find another RUU for it other than the one I used as previously mentioned in my original post. If anyone has the link to the right RUU I could use for this device, it would be really helpful. Thanks again.
sebzter said:
Thanks again for your response, I just did it again this time with my fastboot folder on the desktop, however I still got the same error. How would I find the right RUU for my device? It is an american HTC Sensation 4G from T-Mobile with its CID: HTC__621. I haven't been able to find another RUU for it other than the one I used as previously mentioned in my original post. If anyone has the link to the right RUU I could use for this device, it would be really helpful. Thanks again.
Click to expand...
Click to collapse
Could you write here the info you get for the command "fastboot getvar all"
matekaneve said:
Could you write here the info you get for the command "fastboot getvar all"
Click to expand...
Click to collapse
Yes, here it is
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.709.6
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 3991mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.562s
sebzter said:
Yes, here it is
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.709.6
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 3991mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.562s
Click to expand...
Click to collapse
Your firmware version (3.33.709.6) is an Asian one. Try downloading this ruu and run it: http://androidruu.com/getdownload.p...0U_11.24A.3504.31_M_release_266490_signed.exe
Edit: and delete your serial and imei number from your post!
matekaneve said:
Your firmware version (3.33.709.6) is an Asian one. Try downloading this ruu and run it: http://androidruu.com/getdownload.p...0U_11.24A.3504.31_M_release_266490_signed.exe
Edit: and delete your serial and imei number from your post!
Click to expand...
Click to collapse
Hi, thanks again for your help! The RUU completed successfully this time!!! However, unfortunately, for some reason it is still bootlooping :/
When I turn it on, it shows the HTC logo, plays the little chime with Quitely Brilliant written under HTC, makes a very silent beep noise, and reboots. It keeps on doing this again and again.
Any ideas on what to do next? Why would the phone do this?
sebzter said:
Hi, thanks again for your help! The RUU completed successfully this time!!! However, unfortunately, for some reason it is still bootlooping :/
When I turn it on, it shows the HTC logo, plays the little chime with Quitely Brilliant written under HTC, makes a very silent beep noise, and reboots. It keeps on doing this again and again.
Any ideas on what to do next? Why would the phone do this?
Click to expand...
Click to collapse
Well, I'm out of ideas now. At least the ruu worked. Try maybe the htcdev unlock again now. Get a new token and submit that. And go for the normal sensation option on htcdev site and NOT for the 4g
sebzter said:
Hi, thanks again for your help! The RUU completed successfully this time!!! However, unfortunately, for some reason it is still bootlooping :/
When I turn it on, it shows the HTC logo, plays the little chime with Quitely Brilliant written under HTC, makes a very silent beep noise, and reboots. It keeps on doing this again and again.
Any ideas on what to do next? Why would the phone do this?
Click to expand...
Click to collapse
UPDATE!! I just got the phone to sorta bootup once! It booted up to a configuring android screen (in japanese) and then it shut right off, and started rebooting again. Why is the phone constantly and randomly rebooting like this? I've heard some people said it was the battery but the battery seemed to hold a fairly long charge in bootloader mode, so I don't see why this would be the issue. Anyways I will try an htcdev unlock now and see if that works, will update soon.
Related
Hello!
Just got my hands on a desire S from someone who said they bricked it, i dont think it is though.
I can access fastboot/HBOOT but it doesnt seem to have a custom recovery installed, shows the stock recovery or download mode logo, the screen goes blank and vibrates 7 times.
Every time i try to flash anything through fastboot it gives me the error in the heading
FAILED (remote: not allowed)
The ROM just doesnt boot and shows T mobile logo indefinitely (must be a bootloop) but the phone doesnt have any Tmo logos on the body.
more details
SAGA PVT SHIP S-OFF RL
HBOOT-0.98.0002
RADIO-3805.06.02.03_M
eMMC-boot
I read about ENG S-off but i dont know what this phone has, maybe its just radio S-OFF cos its Tmo and doesnt have a recovery though i dont understand what the 7 vibrates mean either.
little help please?
even more details
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.47.110.3
(bootloader) serialno: HT15TTJ01262
(bootloader) imei: 356708041646975
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 3653mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
7 vibrations most likely mean overheating, and this can't be cured by any means.
The phone is S-OFF, but doesn't have Engineering HBOOT - so you can't use fastboot, it won't allow you (just what it says).
Your best bet is to try a stock RUU and see if it helps.
Download a PG88IMG.zip from an eng hboot, copy it to root of sd (cardreader), boot to bootloader and let it do his job.
Afterwards delete the zip boot to bootloader once more and flash a recovery with fastboot.
I would use a ruu only if those steps fail.
Swyped because PC is under full load or to far away
Tectas said:
Download a PG88IMG.zip from an eng hboot, copy it to root of sd (cardreader), boot to bootloader and let it do his job.
Afterwards delete the zip boot to bootloader once more and flash a recovery with fastboot.
I would use a ruu only if those steps fail.
Swyped because PC is under full load or to far away
Click to expand...
Click to collapse
Hey Tectas I tried your method,
went here
http://forum.xda-developers.com/showthread.php?t=1178001
and got the first radio which had the same number as mine ie this one
From the 1.31.832.3 RUU:
20.28d.30.0805U_3805.04.02.01
says cid incorrect.
shall i try all the ones with 3805 in them? cos i really have no clue which one is right for me considering i dunno which RUU is compatible with this phone
raheeljessa said:
Hey Tectas I tried your method,
went here
http://forum.xda-developers.com/showthread.php?t=1178001
and got the first radio which had the same number as mine ie this one
From the 1.31.832.3 RUU:
20.28d.30.0805U_3805.04.02.01
says cid incorrect.
shall i try all the ones with 3805 in them? cos i really have no clue which one is right for me considering i dunno which RUU is compatible with this phone
Click to expand...
Click to collapse
No, not radio, leave it untouched yet, the hboot is what you need
Check my signature, I personally would recommend this one
Swyped because PC is under full load or to far away
even for this PG88IMG.zip which is the 1mb hboot file it says cid incorrect update fail press power to reboot
Tectas said:
No, not radio, leave it untouched yet, the hboot is what you need
Check my signature, I personally would recommend this one
Swyped because PC is under full load or to far away
Click to expand...
Click to collapse
even for this PG88IMG.zip which is the 1mb hboot file it says cid incorrect update fail press power to reboot
Ok then try it with a ruu, sry that i took your time for nothing
Tectas said:
Ok then try it with a ruu, sry that i took your time for nothing
Click to expand...
Click to collapse
how do i do that? sorry i seem to know nothing
Do you know from which regions your phone is?
Try in fastboot : fastboot getvar all, and Google your main version then download the appropriate file from this link
http://forum.xda-developers.com/showthread.php?t=1002506
Once you are sure you have the right RUU, you might have to make a goldcard to get rid of the CID error
The whole point of having "right" RUU is to avoid this error - having RUU for his specific region gets rid of CID error message. Otherwise he just needs any RUU and goldcard.
Jack_R1 said:
The whole point of having "right" RUU is to avoid this error - having RUU for his specific region gets rid of CID error message. Otherwise he just needs any RUU and goldcard.
Click to expand...
Click to collapse
I have what seems to be the right RUU..
now when i try to install it, the RUU installer hangs and the phone also hangs.
I should reiterate that my phone DOES NOT BOOT into the rom, has what may be boot loop error. If i could access android i wouldnt be asking any of these questions as from in there all this is easy peasy!
i'm trying booting into Hboot and fastboot to install this. as far as i remember it doesnt work here so how else can i go about it?
once again, no custom recovery, no eng bootloader, no working android rom
Thanks to all of you who tried to help by the way
raheeljessa said:
I have what seems to be the right RUU..
now when i try to install it, the RUU installer hangs and the phone also hangs.
I should reiterate that my phone DOES NOT BOOT into the rom, has what may be boot loop error. If i could access android i wouldnt be asking any of these questions as from in there all this is easy peasy!
i'm trying booting into Hboot and fastboot to install this. as far as i remember it doesnt work here so how else can i go about it?
once again, no custom recovery, no eng bootloader, no working android rom
Thanks to all of you who tried to help by the way
Click to expand...
Click to collapse
3 possibilities:
1. Let the ruu run without attached device till the only option is to close the program, search in your temp folder for the rom.zip, copy it to another folder, close the program, copy it to sd and try to flash it the same way you did before with the hboot (rename the rom.zip to PG88IMG.zip before you flash it)
2. Do the same like at 1. but create a goldcard before
3. Do the same I described before with hboot, but create a goldcard before
Swyped because PC is under full load or to far away
If the RUU installer hangs - your chances aren't too good.
If it hangs on "rebooting to bootloader" - boot to FASTBOOT manually and start RUU while in fastboot mode.
If it hangs updating - chances are you're another case of faulty eMMC.
gave the phone to some guy in the market. says he'll take 5£ to open it and check it out and let me know whats wrong.
the RUU rom.zip file when renamed to pg88img.zip or whatever does work as its the only zip file it detects in hboot mode,
it starts the update, heats up like an angry mountain and then sucks its battery off..
thanks you guys for all the help. I'll update you on what was the actual problem when this guy tells me so you know what these symptoms are for in future
Have you tried using the gold card? As it has already been stated that it should get rid of the wrong cid issue.
Sent from my HTC Desire S using XDA
Today I rooted my sensation using clockwork mod recovery and then installed supersu. It was working fine until I restarted my phone. Now whenever I try to turn it on I get stuck the the t-mobile stick together screen. I tryed factory resetting from the bootloader and nothing happened. Please keep any answers noob friendly. Not good with the technical terms. Thanks
Got this info from this command fastboot getvar all
not sure what it means but figured it would help
version: 0.5
version-bootloader: 1.27.0000
version-baseband: N/A
version-cpld: None
version-microp: None
version-main: 3.32.531.14
product: pyramid
platform: HBOOT-8260
modelid: PG5810000
cidnum: T-MOB010
battery-status: good
battery-voltage: 3801mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
gencheckpt: 0
Hi,
Firstly ,you should hide your IMEI and serial number.
Can you please explain again exactly what you were doing?
You do not appear to have any radio...
malybru said:
Hi,
Firstly ,you should hide your IMEI and serial number.
Can you please explain again exactly what you were doing?
You do not appear to have any radio...
Click to expand...
Click to collapse
Okay so first thing I did was install the clockwork mod thing (it opens when I click recovery in bootloader)
Then I installed SuperSu through the sd card and clockwork
My phone worked fine for a little, but then no apps would open and I clicked reboot and it got stuck at the stick together screen... I tried installing mEMBERS rom to fix it just a few minutes ago, but nothing changed... thanks
More detailed steps
First I unlocked the bootloader with htcdev.
Then I flashed clockwork mod using onex installer tool kit (I think it's something like that)
I put the supersu zip on the ad card
I went into bootloader and went to recovery
I installed the supersu zip using that
Relocked the bootloader
reflash the RUU of tmobile one ..this way you can get the phone in working condition but will lose all the data fine ?
connect the phone from bootloader to pc and then double click on RUU thats all (btw you should relock your bootloader ..which i think you did it )
TMOUS ICS RUU ..here
So I have been doing this for a while now and this is the most troublesome phone I have come across and its probably a stupid easy fix or perhaps not fixable at all.
I have an HTC Sensation 4G on Bell in Canada. I got it stuck in a boot loop (nothing in the flash rom obviously). I can get into fastboot and connect to fastboot USB. I am stuck on
HBOOT-1.17.0011
CID BM___001
MID PG5811000
S-ON
Now my issue is that I have downloaded 2 stock 1.35 and 1.45 firmwares from bell (RUU files). Both fail at signature verification. When I try to manually install them I get the same error. When I look in the rom.zip file and open the android-info.txt it has BM___001 for CID and PG5811000 for MID. So why does it fail and how can I get around this.
here is a full getvar all from the device in case it helps
version: 0.5
version-bootloader: 1.17.0011
version-baseband: N/A
version-cpld: None
version-microp: None
version-main: 1.34.666.1
serialno: SH16LV601708
imei: 35**************0
product: pyramid
platform: HBOOT-8260
modelid: PG5811000
cidnum: BM___001
battery-status: good
battery-voltage: 3800mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: RUU
commitno-bootloader: 92e53710
hbootpreupdate: 11
gencheckpt: 0
I apologize, please move this to Q and A
First of all edit the first post and erase imei from it.. You should not show imei's
Now to the problem
What error exactly are you getting when ruu failed ?
And also do this..
1.if you unlocked the bootloader... Relock it..
Command is
fastboot oem lock
2. Run the ruu with phone connected in bootloader/fastboot.. If connected properly the phone should say FASTBOOT USB
Sent from my HTC Sensation using xda premium
ganeshp said:
First of all edit the first post and erase imei from it.. You should not show imei's
Now to the problem
What error exactly are you getting when ruu failed ?
And also do this..
1.if you unlocked the bootloader... Relock it..
Command is
fastboot oem lock
2. Run the ruu with phone connected in bootloader/fastboot.. If connected properly the phone should say FASTBOOT USB
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
I am thinking that my bootloader is half my issue actually. I am on 1.17.0011 and does not say Locked or Unlocked. No matter what PG58IMG package I try (my own compiled or found online) it always gives a signature verification error. I cannot flash anything or do any fastboot oem commands like get_identifier_token as they end in a bootloader [ERR] Command Error !!!
So frustrated. I have all the info for the phone and done care abotu s-on or s-off, just want stock back on but even my stock BM___001 RUU packages give me the same signature error. I have tried 3 of them. I am not sure if it matter but I also cannot find out why I am on version 1.34.666 when stock was 1.35.666 when the phone was released. But I assume if I am going up in version that should not matter right?
So bootloader is not locked or at least as far as I know its not, fastboot oem lock gives the bootlader error as well
I have the correct RUU but it says I dont.
I am open to any ideas. If I knew how to run a rift box I would even order one to be honest.
Thanks in advance
Just an update before I go crash for the night.
All RUU exe packages end up stopping at updating signature and go to a screen that says ERROR 132: Please find the correct ROM package for your phone. I am using the ocrrect ROM packages, have check the android text file to ensure that BM___001 is in there and it is. The firmware I am on is 1.34.666.1 and am updating to either 1.35.666.1 or 1.45.666.1.
Getting the rom.zip and putting it in an SD card only ends up with a very long boot in HBOOT as it reads the 400mb file and does nothing after reading it.
Manual install through fastboot gives me an ERROR 12 signature error and asks to find the correct ROM package for my phone as well.
Trying to load ANY PG58IMG into the phone (even to just update the bootloader) gives me the same 132 signature error.
I am on HBOOT-1.17.0011 so there is no locked or unlocked and no fastboot oem commands work, all end with a (bootloader): [ERR] No Command !!!
I have checked 20 times tonight and the CID and MID match the RUU package so what would be the cause of this if anyone has any ideas. I have been over 200 forums regarding tons of HTC phones (not just the HTC Sensation 4G) and nothing has worked. Tried 10 ROM packs from all over the world, all end with 132 error.
Please if anyone has info it would be appreciated.
well as odd as it is, it seems to be ok now. i simply changed the android-info.txt file in the official rom.zip from BM****** to BM___001 and now it works... wow.... thank god though.
I have this HTC one S, I am not sure which network phone is it. I bought is from someone else and he had no idea about network.
Right now when i press factory reset from volume down + power button. it brought me at this screen which say clockwork Mod recovery v 5.8.1.5
I am able to select only first 2 options which are reboot system now and install zip from sdcard . When i pressed install zip from sdcard its not doing anything and bringing me back on same screen
Could you please help me installing stock rom on this phone. ?
Thanks in advance guys
AW: [Q] Trying to get HTC one S on stock rom? Please help ?
If you turn ur phone on with holding power and volume down you should be in your bootloader.
Can you tell us what stands on the top?
Locked/unlocked/relocked and which hboot version?
Sent from my HTC One S using xda premium
this is the info
Tampered
Unlocked
VLE PVT ship s-on RL
HBOOT-1.08.0000
Radi-0.16.31501S.06_3
open DSP-v23.1.0.32.0323
eMMC boot
Mar 21, 2012, 16:01:09
Just curious to know what this information means , please let me know each line if possible. Appreciate your help
AW: [Q] Trying to get HTC one S on stock rom? Please help ?
Tampered: no stock recovery
Unlocked: your bootloader is looked
VLE: Ville: HTC One S
S-ON: security on
Radio: your radio Version
You have to lock your bootloader.
Download the all in one toolkit which you can find in the development section. There are all necessary files.
Be sure you have installed the HTC sync driver.
1. Connect your mobile To your pc when your are in the screen where you can see hboot version etc.
2. There should be "hboot USB" in blue.
3. Navigate to hboot and press power.
4. It should change to "fastboot USB" in red.
5. Then open the all in one toolkit on your PC.
6. Open the folder where ADB and fastboot exe are located.
7. Press shift and right click somewhere in the folder and open the command line.
8. Then type in "fastboot oem lock"
9. If you take a look to your phone you should see that the "unlock" changed To "relocked"
That was the first step.
10. Go To the development section in this forum and look for the wwe europe ville ics ruu 2.31 or sth like that.
11. Download the file
12. Doubleklick the file
13. Follow the instructions
14. Let the ruu install everything
15. If everything works fine you should be on official ICS 4.0.4 with Sense 4.1 now
Good luck!
I hope I wrote an easy understandable instruction.
If u experience any problems feel free to post it here.
I'm sure I or someone else can help you.
Sent from my HTC One S using xda premium
NQNH , thanks a lot for this easy and nice explanation, its really helpful for a noob like me. I have few more questions but lets resolve this issue first. Okay I tried all steps you mentioned and it worked like a charm. just got stuck at final step. Please help.
In CMD i got this
'C:\Users\Owner\Desktop\HTC' is not recognized as an internal or external comman
d,
operable program or batch file.
C:\Users\Owner\Desktop\HTC custom rom procedure\One_S_All-In-One_Kit\data>fastbo
ot oem lock
...
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642032 (0x1FDDFD70)
FAILED (status read failed (Too many links))
finished. total time: 0.941s
C:\Users\Owner\Desktop\HTC custom rom procedure\One_S_All-In-One_Kit\data>
This is the error message when i tried step 8, but when i checked the screen it shows relocked now , seems like it worked okay.
i tried this file
http://forum.xda-developers.com/showthread.php?t=1941402
Everytime i runs this RUU application file , after passing thru all steps it says ROM utility stopped working, Seems like i am almost done but just stuck at last point.
Hello NQNH, i tried it one more time and finally passed thru that screen. it started ROM update utility but got back with this error msg
Error (131) customer ID error
The ROM update utility cannot update your android phone
please get the correct ROM update utility and try again
I am using RUU : 1.0.6.2012
please let me know if i can use any other utility
AW: [Q] Trying to get HTC one S on stock rom? Please help ?
What do you get when you type in
fastboot getvar cid
?
Try this RUU
http://www.androidfiles.org/ruu/sec...02.31_10.09a.50.04L_release_275655_signed.exe
Sent from my HTC One S using xda premium
I tried RUU which you suggested , Thanks NQNH but sorry this time it came back with error (130) , model ID error.
fastboot getvar cid : BM___001
AW: [Q] Trying to get HTC one S on stock rom? Please help ?
Seems that you have a branded phone. (Bell Mobile Canada?)
This ruu should run fine:
http://www.androidfiles.org/ruu/sec...02.04_10.08g.50.04L_release_280275_signed.exe
Sent from my HTC One S using xda premium
Thanks Thanks Thanks Thanks a lotttttttttt, I don't know if pressing thanks button is good enough to appreciate your help. I learnt a lot from this session. If you don't mind , just for curiosity can i ask you few more questions,
Tampered (Does it mean somebody tried to install custom rom on it or something else ? )
Unlocked
VLE PVT ship s-on RL ( does S-on means this phone is unlocked or some thing else ? )
HBOOT-1.08.0000 ( is it same like version number in iphone , is it baseband version number, where i can find this number in phone settings ? )
Radi-0.16.31501S.06_3
open DSP-v23.1.0.32.0323 ( don't know what it means , please explain )
eMMC boot ( don't know what it means , please explain )
Mar 21, 2012, 16:01:09 ( is it manufacturing date or date when it was tempered )
Thanks again for your help ..
bindudhindsa said:
Thanks Thanks Thanks Thanks a lotttttttttt, I don't know if pressing thanks button is good enough to appreciate your help. I learnt a lot from this session. If you don't mind , just for curiosity can i ask you few more questions,
Tampered (Does it mean somebody tried to install custom rom on it or something else ? )
Unlocked
VLE PVT ship s-on RL ( does S-on means this phone is unlocked or some thing else ? )
HBOOT-1.08.0000 ( is it same like version number in iphone , is it baseband version number, where i can find this number in phone settings ? )
Radi-0.16.31501S.06_3
open DSP-v23.1.0.32.0323 ( don't know what it means , please explain )
eMMC boot ( don't know what it means , please explain )
Mar 21, 2012, 16:01:09 ( is it manufacturing date or date when it was tempered )
Thanks again for your help ..
Click to expand...
Click to collapse
glad to hear that I helped you.
Tampered means that someone already changed something on the phone (unlocked/relocked/custom recovery)
A comparison should be.. if you bought a new pc and if you open the case you have to break the seal. The "Tampered" say that you had break this seal on the phone (e.g. by unlocking the bootloader)
S-ON means that the security flags are on. Its a system protection so nobody can manipulate system data.
S-ON + locked bootloader -> you can do nothing, no root, no custom things
S-ON + unlocked bootloader -> you can flash custom recovery, root, custom rom (you can see an unlocked bootloader as a compromise between S-ON and S-OFF
S-OFF -> you can do everything what you want, change bootloaderGUI, bootanimations, splashscreens.
Unlocked means that you bootloader is unlocked. If its locked you cant install custom recovery, root and custom firmware. It has to be locked when you install a RUU.
You cant find your HBOOT version in your phone settings because its the version of the bootloader.
the bootloader is independed from the rom you are on. Its like the BIOS from your PC and your ROM is Win7 where you either cant find the bios version.
Radio is the module which is responsible for mobile data etc.
no/wrong/corrupt radio = no network/no signal
openDSP .. i don't know
eMMC boot, I guess that this is the partition where the bootloader is located.. but I'm not sure.
Mar 21, 2012, 16:01:09 is the date when .. difficult to explain .. when the development of the RUU was finished?
if I wrote something wrong please correct me.
Thanks a lot for this very helpful information. Appreciate your help. Kind of person like you are the reason these forums are running successfully and helping novice people like me. Thanks again.
AW: [Q] Trying to get HTC one S on stock rom? Please help ?
Thanks for your words
Sent from my HTC One S using xda premium
Hello.
I'm having same problem with getting back on stock firmware...
After trying to flash into CM10, i got stock in CM boot logo.
So trying to get back to original using RUU.
But it just looks like I can not get right one...
I did everything like in posts above, and when I enter "fastboot getvar cid" I got "HTC_Y13"
Any idea which RUU is correct for that?
I'm still trying, so maybe it will be fools luck... Or maybe someone can put me on point?
auronn said:
Hello.
I'm having same problem with getting back on stock firmware...
After trying to flash into CM10, i got stock in CM boot logo.
So trying to get back to original using RUU.
But it just looks like I can not get right one...
I did everything like in posts above, and when I enter "fastboot getvar cid" I got "HTC_Y13"
Any idea which RUU is correct for that?
I'm still trying, so maybe it will be fools luck... Or maybe someone can put me on point?
Click to expand...
Click to collapse
your cid is a unbranded eu cid.
try any unbranded eu ruu (3.16 or earlier)
Hello everyone,
So, 2 days in front of PC, reading forums and trying. No luck... So try to post it here.
I want to flash to CM10.
Bootloader is unlocked.
Recovery is installed (TWRP S4)
Root is done.
Security S-ON.
When I try to install CM10, everything went fine, but when It have to reboot it just stuck in CM booting logo loop...
And since you can't remove memory card on HTC One S, I think I have no other option how to reinstall stock firmware. And my problems starts...
I relocked bootloader.
Download already like five different RUU's...
The problem is, I can not locate my version, it's blank...
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT23NW410019
(bootloader) imei: 359901040772549
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4124mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
So everytime I start RUU, in the screen Current information about your Android phone" "Image version" is blank and the one with "Verify that you want to update the ROM version" "From Image Version" is blank...
When I push "Next" it goes "Checking", then "Rebooting Bootloader", "Erasing User Data" and "Sending".
When it comes to "Updating Signature" I'm getting error code...
Phone is bought in Norway, and by checking cid: HTC_Y13, I can see that it's HTC-Nor. So which one of RUU's I have to use?
I also tried to flash zip RUU, using One_S_All-In-One_Kit_v3.5 with same no luck...
Really don't know what to do... Any help would be appreciated...
Thank you in advance!
real187 said:
your cid is a unbranded eu cid.
try any unbranded eu ruu (3.16 or earlier)
Click to expand...
Click to collapse
Thank you, I'm downloading and will try this now:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
Already tried those:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed.exe
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.109_Radio_16.12.20.02U_16.05.20.16_M2_release_263131_signed.exe
RUU_VILLEPLUS_U_JB_45_HTC_Generic_1.14.999.50_Radio_1.10r.50.05.19_10.22a.50.08L_release_294323_signed.exe
And also:
OTA_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_1.11.50.05.28_10.27.50.08L_release_301852xf01hejl416oev96.zip
using One_S_All-In-One_Kit_v3.5 with no luck...
Does any body can tell me the difference between Ville, VilleC2 and VillePlus?
real187 said:
your cid is a unbranded eu cid.
try any unbranded eu ruu (3.16 or earlier)
Click to expand...
Click to collapse
Thank you a lot!!!
This one worked:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1. 11.50.05.28_10.27.50.08L_release_301814_signed_2_4 .exe
auronn said:
Hello everyone,
So, 2 days in front of PC, reading forums and trying. No luck... So try to post it here.
I want to flash to CM10.
Bootloader is unlocked.
Recovery is installed (TWRP S4)
Root is done.
Security S-ON.
When I try to install CM10, everything went fine, but when It have to reboot it just stuck in CM booting logo loop...
And since you can't remove memory card on HTC One S, I think I have no other option how to reinstall stock firmware. And my problems starts...
I relocked bootloader.
Download already like five different RUU's...
The problem is, I can not locate my version, it's blank...
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT23.......
(bootloader) imei: 3599...............
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4124mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
So everytime I start RUU, in the screen Current information about your Android phone" "Image version" is blank and the one with "Verify that you want to update the ROM version" "From Image Version" is blank...
When I push "Next" it goes "Checking", then "Rebooting Bootloader", "Erasing User Data" and "Sending".
When it comes to "Updating Signature" I'm getting error code...
Phone is bought in Norway, and by checking cid: HTC_Y13, I can see that it's HTC-Nor. So which one of RUU's I have to use?
I also tried to flash zip RUU, using One_S_All-In-One_Kit_v3.5 with same no luck...
Really don't know what to do... Any help would be appreciated...
Thank you in advance!
Thank you, I'm downloading and will try this now:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
Already tried those:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed.exe
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.109_Radio_16.12.20.02U_16.05.20.16_M2_release_263131_signed.exe
RUU_VILLEPLUS_U_JB_45_HTC_Generic_1.14.999.50_Radio_1.10r.50.05.19_10.22a.50.08L_release_294323_signed.exe
And also:
OTA_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_1.11.50.05.28_10.27.50.08L_release_301852xf01hejl416oev96.zip
using One_S_All-In-One_Kit_v3.5 with no luck...
Does any body can tell me the difference between Ville, VilleC2 and VillePlus?
Click to expand...
Click to collapse
Firstly, I would recommend removing part of your IMEI and Serial Numbers from your post, it could be used in bad ways by other people.
Ville is the HTC One S with a Snapdragon S4 chipset, clocked at 1.5GHz (dual core) otherwise known as z520e. (You have this phone)
VilleC2 is what became of the HTC One S when HTC ran out of Snapdragon S4 chipsets in many parts of the world due to a shortage. It has a Snapdragon S3, clocked at 1.7GHz (dual core) otherwise known as z560e.
VillePlus is a Special Edition version of the HTC One S, only available in Taiwan. It has the same processor as the Ville, except comes in a white body instead of the normal grey or black options and has 64GBs of internal storage. The other two have 16GBs internal storage. This phone is quite rare.
You should try RUUs only that say ville, and not VillePlus or VilleC2. These won't work and may even irreversibly damage your phone.
OTAs only work when you already have a previous firmware version. Let's say you were on ICS, a Jelly Bean FOTA is released (firmware over the air) and installs ("flashes") on top of your existing ICS installation, keeping your apps and data.
RUUs wipe all data and wipe everything on the phone when installing through a USB connection.
Could you specify what error code you get on the RUUs?
----
The reason why CM10 didn't boot is because you didn't flash the boot.img.
You need to extract the boot.img from the CM10 zip and put that into your "working folder" (the folder with adb and fastboot files in it)
Open up a command prompt / terminal in that folder and type
fastboot flash boot boot.img
when you are in FASTBOOT USB mode in the bootloader.
Go to Fastboot. Plug in your USB with the phone. Now, ctrl and r --> type cmd --> cd to C:/where your adb is --> fastboot read cid
Then type the 8 digit string that you get. It would help us determine your network provider.
I have a HTC One S cell phone that stopped working after I did a software update from the settings menu. The phone has no service (not able to connect to the network). My service provider is Wind mobile. They tried a "hard reset" or factory data reset this did not solve the problem. Then I had a technician replace the firmware and downgrade to an earlier version of software. This got the phone to work. I was able to make one call. However I was unable to pickup wifi. I tried to turn on wifi in the setting menu and then the phone stopped working again. I have tried talking to HTC customer service but they have not been able (or willing) to help.
HTC One S
model Z520m, Android
HBOOT- 2.15.0000
RADIO - 1.11.50.05.28
Open DSP - v31.1.0.45.0815
eMMC - boot
device: ville
build id: JR003C
SDK version: 16
Release: 4.1.1
Incremental version: 133955.7
Does anyone know how to fix this phone?
I suspect that either the firmware installed incorrectly or is the wrong version for the phone.
Does anyone know where to get the correct version of the firmware?
Thank You,
Greg
dwa789 said:
I have a HTC One S cell phone that stopped working after I did a software update from the settings menu. The phone has no service (not able to connect to the network). My service provider is Wind mobile. They tried a "hard reset" or factory data reset this did not solve the problem. Then I had a technician replace the firmware and downgrade to an earlier version of software. This got the phone to work. I was able to make one call. However I was unable to pickup wifi. I tried to turn on wifi in the setting menu and then the phone stopped working again. I have tried talking to HTC customer service but they have not been able (or willing) to help.
HTC One S
model Z520m, Android
HBOOT- 2.15.0000
RADIO - 1.11.50.05.28
Open DSP - v31.1.0.45.0815
eMMC - boot
device: ville
build id: JR003C
SDK version: 16
Release: 4.1.1
Incremental version: 133955.7
Does anyone know how to fix this phone?
I suspect that either the firmware installed incorrectly or is the wrong version for the phone.
Does anyone know where to get the correct version of the firmware?
Thank You,
Greg
Click to expand...
Click to collapse
Connect phone in fastboot mode to your computer, open CMD commandline and type "fastboot getvat all". You will get a log.Delete your IMEI / serial from the log and post it here (The LOG not the IMEI...)
LS.xD said:
Connect phone in fastboot mode to your computer, open CMD commandline and type "fastboot getvat all". You will get a log.Delete your IMEI / serial from the log and post it here (The LOG not the IMEI...)
Click to expand...
Click to collapse
bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.1500.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: GLOBA001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4106mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'll get the link for the matching RUU file for you
There is no matching RUU OTA update is avaiable. Are you familiar with using fastboot commands? DOWNLOAD the OTA. Extract the included firmware.zip and flash it via fastboot. If it works --> good. If not you'll have to change your CID to install a RUU for unbraded versions of the phone.
Thanks for locating the OTA update. I am not familiar with using fastboot commands. Can you link me to a guide or post that explains the procedure.
Thank You,
Greg
dwa789 said:
Thanks for locating the OTA update. I am not familiar with using fastboot commands. Can you link me to a guide or post that explains the procedure.
Thank You,
Greg
Click to expand...
Click to collapse
Download ADB/fastboot, uninstall HTC Sync. Connect your phone in fastboot mode, open CMD commandline an type:
"fastboot oem rebootRUU"
"fastboot flash zip firmware.zip"
"fastboot flash zip firmware.zip" (AGAIN!)
"fastboot reboot-bootloader"
Then reboot the phone to check if android is running
I followed the steps you provided and the firmware loaded fine and Android is also running. However the phone is still not working properly. The phone was randomly switching between "no service" for several minutes and then to WIND away (roaming) and then to 4G with varying signal strength. I was able to make a brief call while the phone was in 4G mode. Now the phone seems to be stuck with "no service" again. Any ideas as to what could be the problem?
Thanks
dwa789 said:
I followed the steps you provided and the firmware loaded fine and Android is also running. However the phone is still not working properly. The phone was randomly switching between "no service" for several minutes and then to WIND away (roaming) and then to 4G with varying signal strength. I was able to make a brief call while the phone was in 4G mode. Now the phone seems to be stuck with "no service" again. Any ideas as to what could be the problem?
Thanks
Click to expand...
Click to collapse
Yes You will need to install a FULL system e.g. RUU. The firmware contains all basic partitions of your phone BUT not System, data ... If you tried instaling a OTA update and it failed --> You need a CLEAN installation.
LS.xD said:
Yes You will need to install a FULL system e.g. RUU. The firmware contains all basic partitions of your phone BUT not System, data ... If you tried instaling a OTA update and it failed --> You need a CLEAN installation.
Click to expand...
Click to collapse
How do I preform a CLEAN (Full system) installation?
dwa789 said:
How do I preform a CLEAN (Full system) installation?
Click to expand...
Click to collapse
You can't. As least you can't do it by the ormal way, as there is NO stock RUU package available for your phone. You can Unlock the bootloader, set it S-OFF, then you're able to install unbranded or custom software.
LS.xD said:
You can't. As least you can't do it by the ormal way, as there is NO stock RUU package available for your phone. You can Unlock the bootloader, set it S-OFF, then you're able to install unbranded or custom software.
Click to expand...
Click to collapse
I hate to ask any more questions because you have been so helpful in answering all my questions but I would really like to get my phone working again.
How do I go about Unlocking the bootloader, setting it to S-OFF and then installing unbranded software? Also where do I get unbranded software that will work with my phone?
dwa789 said:
I hate to ask any more questions because you have been so helpful in answering all my questions but I would really like to get my phone working again.
How do I go about Unlocking the bootloader, setting it to S-OFF and then installing unbranded software? Also where do I get unbranded software that will work with my phone?
Click to expand...
Click to collapse
How about you get Teamviever and i'll set up the phone for you?
LS.xD said:
How about you get Teamviever and i'll set up the phone for you?
Click to expand...
Click to collapse
Ok, I installed Teamviewer on my computer.
dwa789 said:
Ok, I installed Teamviewer on my computer.
Click to expand...
Click to collapse
PM me ID+pass when you're ready