Today morning I got a notification of system update (OTA) on my HTC Desire 626 g plus and downloaded it. While installing in recovery something happened, and the phone got stuck with yellow 'no command' error. Clicking random I got the recovery menu, but rebooting just stopped at white boot screen and went back to 'no command'.
My phone is rooted with kingroot, I think it's a temporary one. Stock ROM, system recovery mode.
Can anyone say what happened ?? I don't have any backup, never thought official OTA can mess up :crying: Please help
SPECIFICATIONS:
PLATFORM OS v4.4.2 (KitKat)
Chipset Mediatek MT6752
CPU Octa-core 1.7 GHz Cortex-A53
GPU Mali-T760MP2
Hi, thank you fro using XDA Assist. The ota most likely failed because your rooted. Please see this, http://forum.xda-developers.com/desire-626 They are the experts on your device and can further help you.
Thread closed.
Related
I have a rooted generic chinese tablet 9 inch running android 4.4.2. i foolishly installed a boot logo animation changer now stuck on bootloop, unable to update via caches on recovery screen and still on bootloop after factory reset. I have been unable to find firmware for my board ET F900 V1.5. any suggestions would be gratefully received
XDA Visitor said:
I have a rooted generic chinese tablet 9 inch running android 4.4.2. i foolishly installed a boot logo animation changer now stuck on bootloop, unable to update via caches on recovery screen and still on bootloop after factory reset. I have been unable to find firmware for my board ET F900 V1.5. any suggestions would be gratefully received
Click to expand...
Click to collapse
Please tell your device name.
Also if you don't get it on XDA, then best way is giving it to company for repair.
Sent from my AO5510 using XDA Premium 4 mobile app
Hello elders. I hope that I'm in the right session for my ask. I have tried to update my tecno 7c android 5.0 based tablet (that I've bought, just a month ago) cause it proposed it to me in the settings, software update option. Everything went well till the end of the download. After that, my tablet rebooted correctly and came to the android home screen. But each time I put any SIM card inside, I always have this message: "com.phone stopped working". I've tried to perform a full reset of the phone through the stock recovery but I don't even have access to recovery now. The phone is MTK 6582 processor based tablet. I've tried to read on internet to see if there's a way to fix it but the one I've found explained that I need a same working tablet whose backup file I'll flash on the bricked one through SP FlashTool to revive it but I have nobody having such tablet. Help please if you have solutionq for me. Very urgent. My tablet, the only on I have! Thanks in advance.
Hello! Nobody to answer me?
Hello everyone
I just bought a new THL 5000 in the Internet.
A short while after it came (everything was okay with the device) I rooted it
with the One-click-root application called KingRoot. It worked eine and the RootCheck said it's installed properly. After a week there was a System update available from the current 4.4 KitKat to Lollipop I think. So, without thinking about unrooting, I downloaded and tried to install the update. But a short moment before the end there was an error. I was thinking about the Root so I chose "Reboot System now" in recovery. The THL Logo lighted but after a while it said "no command" and I got thrown back to recovery. After a data & cache wipe I tried again, but this time, I didn't even get the error neither the recovery. The phone did no longer react to my inputs. The only thing I could do now was waiting. After a sleepless nicht, the accu was down and I started to charge it. Again there was only the THL logo but nothing else.
Any helpful links/solutions?
If you need more information please just ask
Hi,
I can't find a relevant thread for your device and issue, but here is a thread dedicated to your device where you can ask for help,
http://forum.xda-developers.com/android/general/thl-5000-octacore-mtk6592t-root-recovery-t2835857
Good luck!
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Hello,
Everyone is highly recommended to post their opinions and straight ideas on how can i fix my Alcatel alcatel one touch flash plus boot loop. It was originally a 4.4.4 kitkat by default and due to my curiosity to change my rom, I downloaded a customed rom lolipop 5.1.1 that i think might be compatible for my device but after installing the rom, I am now stock in boot loop. I have tried all the solution i knew from key combination power button plus up and power button plus down but unfortunately i cant access the recovery mode. The logo is blinking every 20 seconds. I also tried to connect it to my computer to install another rom but unfortunately my computer cannot recognize my phone. I already install the drivers necessary but i think the loop is the reason why my phone cant be detected. I have already search everything and every article point me to this site. According to my analysis, My phone is bricked!
The following are its conditions:
-Boot Loop every 20 seconds
-Cant access recovery mode by combination keys
-My PC cant recognize it when connected via its usb cable
-Sometimes when the logo disappears after 20 seconds, my pc suddenly beeps and its the signal for the recognition of the device but when the logo starts again, beep sounds again stating unrecognized device.
My Unit is Alcatel One Touch Flash Plus Display: 5.5" HD IPS capacitive touch screen
Operating System: Android 4.4 KitKat
Processor: Octa-core 1.5GHz
Memory (RAM l ROM): 2GB l 16GB
Can you help me.
Thank you!
Nordxxx said:
Hello,
Everyone is highly recommended to post their opinions and straight ideas on how can i fix my Alcatel alcatel one touch flash plus boot loop. It was originally a 4.4.4 kitkat by default and due to my curiosity to change my rom, I downloaded a customed rom lolipop 5.1.1 that i think might be compatible for my device but after installing the rom, I am now stock in boot loop. I have tried all the solution i knew from key combination power button plus up and power button plus down but unfortunately i cant access the recovery mode. The logo is blinking every 20 seconds. I also tried to connect it to my computer to install another rom but unfortunately my computer cannot recognize my phone. I already install the drivers necessary but i think the loop is the reason why my phone cant be detected. I have already search everything and every article point me to this site. According to my analysis, My phone is bricked!
The following are its conditions:
-Boot Loop every 20 seconds
-Cant access recovery mode by combination keys
-My PC cant recognize it when connected via its usb cable
-Sometimes when the logo disappears after 20 seconds, my pc suddenly beeps and its the signal for the recognition of the device but when the logo starts again, beep sounds again stating unrecognized device.
My Unit is Alcatel One Touch Flash Plus Display: 5.5" HD IPS capacitive touch screen
Operating System: Android 4.4 KitKat
Processor: Octa-core 1.5GHz
Memory (RAM l ROM): 2GB l 16GB
Can you help me.
Thank you!
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately I can not find any information on your device only other Alcatel one touch models so I am pretty sure you have installed an incompatible rom. The only thing I can suggest is ask your question here
http://forum.xda-developers.com/android/help
Hopefully someone with your device can help
Good Luck
Sawdoctor