[Completed] Need help! Please! Samsung Galaxy S3 (SGH-i747) - XDA Assist

Hi everyone! First i want to apologize in advance if i made a mistake or something. Not too sure where to post! Kinda new to forums and forum rules...I need help seriously! For almost a year now, my Galaxy S3 isn't recognizable by any PC, Mac or whatever. Mavericks, Yosemite, Windows 7 or 8, nothing recognizes it. Downloaded the latest Samsung USB drivers, Kies and still didn't work. Went to a shop and they fixed the mini usb thingy where you plug it. They said it was partially unsolded so the data couldn't get through...Don't know if it's true. Got it recognized by my mac the 1st time. Thought it was finally recognized until the 2nd time i plugged it in. Usb device not recognized, again. 70$ thrown out the window. Anyways. Not too long ago, while still unrecognizable, the phone started shutting down by itself every 2 hours or so so i kinda got fed up and decided to wipe it to factory settings. Tried it through Kies instead of using the vol up/home button/power. Was never able to do so. Kies was doing fine until it told me that i needed to go in emergency recovery mode cause something had went wrong. Tried to go on recovery mode but no can do. Odin mode shows up all the time even though i'm doing the recovery mode manipulation. Got fed up of that too so i decided to flash to a stock firmware through Odin. Forgot to mention: the download mode works...well looks like it. Odin didn't recognize my phone too. Actually, i got it see the phone like 5 times over 100 trys and everytime (the 5 times) it started the flashing process, it would fail right at beginning of the process. Like 3 seconds later. Tried all kinds of pc's, usb cables, etc. My phone was rooted and i lost the root by updating. Was that a mistake? I don't know since the thing was functionning very well. The whole point: now i'm stuck with a phone that goes straight in Odin mode! The same tech from the same shop kept my phone for a few days to check it out and still nothing! Even the guy from the store doesn't know what to do. He spoke to me about flashing the phone's CMOS but he looked soooo unsure...And he was asking 50$ to do so....so no thank you. What can i do people? What is wrong with my phone? Wish i knew more about those things so i wouldn't have to cry for help! Don't know if i explained it well since english is not my natural language...Will answer your questions if you guys wanna know more...Seriously, heeeeeeeeeeelp! Thanks in advance people!

Hi there,
You'd be best served asking for help from the experts who own your device, here but first register an account on XDA :
AT&T Galaxy S III Q&A, Help & Troubleshooting
Also please read this thread:
Problem connecting Galaxy S3 with PC
[HOW TO GUIDE] How To Unbrick AT&T I747 and I747M
Good luck

Related

[Q] dont know where to start Android 2.3.6 Gingerbread for Samsung Galaxy S2

Hi all. need help urgently! i am a noob with xda and all the phones but could not stop my self to try new things out,got a new galaxy 2 phone, only can remember its runs on Official Android 2.3.6 XWKK2 for Samsung Galaxy S2, 4hours ago looking through Xda-developers site and start play with odin, following what it says than noob part of me came in and i some how unplugged usb from the pc.now the phone is stuck at picof phone yellow angle and pc message says some issue happened during upgrade needs from kies to recover try to fix it. try kies it keep saying connect the usb to phone i turn off on the phone it just always come to the same stament some how i got it back to the downloading page and try odin i get fail all the time. what should i do now? please help and thank you all
and now i have fixed it by reinstall the stock so thanks

[Completed] Samsung TAB2 Stuck on BootLoop please Help me!!!

Hello Guys
So i recently purchased a samsung tablet (gt-n8013) it was working fine, i put it to charged came back from work and it wouldn't bootup ,it stuck at the samsung logo..I checked online (google and youtube) and it seems like a common issue with that tablet (thank you samsung), i tried almost everything, hard reset, root the tablet and nothing seems to be working. I also noticed my laptop doesn't recognized the device after i download the latest firmware from samsung,i tried different softwares like Odin or kies none of them wouldn't recognized the device, so it was impossible to root my tablet..i bought a new usb cable and tried the same steps on a different pc still nothing...Its been two weeks now still not working and i don't know what else to do, if anyone ran to the same problem and knows how to fix it ,could you kindly help me resolve this issue or point me out to the right direction PLEASE!!!..Thank you.
Duplicate thread. Thread closed.

[Completed] Help with GT P1000N (ODIN cause my trouble)

Hello! I have a problem caused by an ODIN failure and I was wondering if I can get any help. My tablet is a GT P1000N and I updated my ROM to Lollipop 5.0. It worked perfect for around 2 weeks when suddenly when I was watching a You Tube video it start rebooting again and again so I downgrade it to stock rom and install Lollipop 5.1 by hygoandroid but I didn’t like it because my tablet was having problems with the screen and the notification bar also. And here is where my problems started. I flashed stock room via ODIN again to install Lollipop 5.0. I put everything in order to flash it and the process began but suddenly stop. I leave it like 30 min and then I realized it was stuck. So I disconnect the tab and shut it down. When I turn the download mode on again it was the cellphone exclamation sign computer and following a tutorial I recovered the tab and put it back to the normal download mode. I flashed the stock rom again and it didn’t get stuck but ODIN said FAILED. I put reset in Odin and put all the files again and press start but It didn’t make any change in my tab. I tried this like 3 times and then I try to put the tab again into recovery but the tab was in black. I tried to connect the tab to the computer and the computer recognized it (make the sound when you plug an usb) and I when I press the power button to shut down the computer makes the disconnect sound. Neither ODIN 3-V1-7 or heimdall suite 1.3.1 recognize my tab but my computer does like I explained. I hope anyone can help me. I know my tab is old but it was working great and I’m an engineering student that doesn’t have any money to buy a new one.
I wish everyone a great day. I speak Spanish, I did my best to write this in English. If something is not clear enough ask me.
Thanks!
Hi there
You'd be best served asking for help from the experts who own your device, here
> Samsung Galaxy Tab > Galaxy Tab Q&A, Help & Troubleshooting
Good luck

Samsung Galaxy Tab 2 10.1 SGH-i497 OS Update Assistance

So basically I recently decided that it would be a BRILLIANT idea to upgrade my tablet to 4.4+ so I could use Pokemon GO on it, but lo and behold I have gotten to the point where I have hit a wall
As the title says, it's a Samsung Galaxy Tab 2 10.1 SGH-i497 that used to run 4.1.4 I believe, and I no longer can get past the boot screen, I can get into Recovery mode and Download mode, and I have a recovery save on Kies but Kies refuses to connect to the tablet in it's state, it just continues to attempt to connect forever.
I guess my question would be this...
Is there an OS that is SGH-i497 compatible that I can attempt to use through ODIN, or alternatively, can someone point out a good recovery file I can use through an SD-Card so I can at least use my tablet again.
I will be monitoring for the next 8 hours before bed to answer any questions and provide any more information that I can, and thank you very very much ahead of time if you can help, I've been combing through forums for the past 3-4 hours and finally decided to make an account to make a post. Hopefully if I can get this resolved, I can help people if they have a similar problem in the future.
Bump
Really hope someone knows something, at this point I honestly just want to get it back to it's normal stock stuff, I can't get it to connect to Kies when it's in download or recovery mode so my recovery files are on there and I don't know why it can't find the recovery files in the external SD card I have.
Bump
I'm screwed huh lol
DevvnnPhoenix said:
So basically I recently decided that it would be a BRILLIANT idea to upgrade my tablet to 4.4+ so I could use Pokemon GO on it, but lo and behold I have gotten to the point where I have hit a wall
As the title says, it's a Samsung Galaxy Tab 2 10.1 SGH-i497 that used to run 4.1.4 I believe, and I no longer can get past the boot screen, I can get into Recovery mode and Download mode, and I have a recovery save on Kies but Kies refuses to connect to the tablet in it's state, it just continues to attempt to connect forever.
I guess my question would be this...
Is there an OS that is SGH-i497 compatible that I can attempt to use through ODIN, or alternatively, can someone point out a good recovery file I can use through an SD-Card so I can at least use my tablet again.
I will be monitoring for the next 8 hours before bed to answer any questions and provide any more information that I can, and thank you very very much ahead of time if you can help, I've been combing through forums for the past 3-4 hours and finally decided to make an account to make a post. Hopefully if I can get this resolved, I can help people if they have a similar problem in the future.
Click to expand...
Click to collapse
How about you start by telling us what you did to get to this point?
Have you installed a custom recovery on it?
Have you done any reading on rooting, installing roms etc?
I recently acquired one of these as well, and I have yet to find somewhere definitely that says that custom roms can be used on it.
If you find one, please reply back though!

[Completed] Samsung Galaxy S6 Edge (''An error occurred while updating the device software'')

Hi everyone, first of all i wanted to thank you for clicking on this thread and im getting straight to the point;
I have recently rooted my phone with no issues and after this i had decided to install a S6 edge twrp recovery onto my device and i did so and i immediately have got a soft brick well i think it is a soft brick however it could be a hard brick as i am not pro at this, so i read some articles on here and decided to connect my phone to odin and install stock firmware and it had failed so now my phone can still go into download mode however it is not recognised by odin or any other Samsung programs such as smart switch and kies. I have tried 2 different USB cables all the ports on my laptop and no luck. I think it is the right time to mention that i also have the phone bricked on the light blue screen with the message ''An error occurred while updating the device software. Use the emergency recovery function in Smart Switch PC software'' It means a lot to me as this is my only smart phone and i really need it for my education and i would really, really be thankful if someone is willing to help me as i simply need this phone as cannot afford to buy a new one, thank you in advance Maciek.
maciek.zawadzki said:
Hi everyone, first of all i wanted to thank you for clicking on this thread and im getting straight to the point;
I have recently rooted my phone with no issues and after this i had decided to install a S6 edge twrp recovery onto my device and i did so and i immediately have got a soft brick well i think it is a soft brick however it could be a hard brick as i am not pro at this, so i read some articles on here and decided to connect my phone to odin and install stock firmware and it had failed so now my phone can still go into download mode however it is not recognised by odin or any other Samsung programs such as smart switch and kies. I have tried 2 different USB cables all the ports on my laptop and no luck. I think it is the right time to mention that i also have the phone bricked on the light blue screen with the message ''An error occurred while updating the device software. Use the emergency recovery function in Smart Switch PC software'' It means a lot to me as this is my only smart phone and i really need it for my education and i would really, really be thankful if someone is willing to help me as i simply need this phone as cannot afford to buy a new one, thank you in advance Maciek.
Click to expand...
Click to collapse
Greetings and welcome to assist. In the smart switch software on your pc there is an emergency firmware recovery option that should repair your phone. As long as you have download mode the phone is usually recoverable so don't worry. If you put your phone in download mode and follow the on screen instructions from emergency firmware recovery you should be fine
Good Luck
Sawdoctor

Categories

Resources