Database Info

Noob Unlocks and Subsequently Kills Phone

A day or two ago I unlocked my ChaCha using the HTCDev.com instructions. I then used DooMLoRD_v4_ROOT-zergRush-busybox-su to root it. Everything was going fine until I apparently deleted one too many system apps and now my phone is in extremis.
The problem: As the phone boots up and reaches the HTC logo screen, just when the main interface should appear, an error pops up. It says:
Code:
Sorry!
The process com.htc.bg has stopped unexpectedly. Please try again.
[Force close]
When I close it, the HTC logo appears again as the main GUI is reinitialised, which leads to the same error popping up again, thus entering into an infinite loop.
I can just about manage to connect the phone to my PC as a disk drive, but it's not connected in such a way that RUU or unrooting applications can "find" it from within Windows, so if I'm to fix this it's gotta be from the SD card/Hboot.
Details:
* HTC ChaCha with the latest Android firmware.
* Unlocked and rooted, but remains S-ON (Superuser was installed and worked).
* Used Titanium to delete apps, but made backups and have them on my hard drive for safe keeping but can't access the phone in order to restore them properly.
* I was unable to restore backed-up system apps prior to this critical problem emerging, which I think is because my phone isn't "truly" rooted. I can apparently remove from but not add to the protected areas of the phone.
* I've tried flashing the device with numerous recovery ROMs and they all fail (wrong image, etc.). I'm having an extremely difficult time finding the original ROM anywhere and more importantly finding one which will work without the phone being connected to the PC at any stage of the flashing job.
* Factory resets and recovery boots don't seem to have any effect.
* It's a carrier-locked/branded phone, from Three/Hutchison 3G UK. I'm locked into my contract for another year at least.
* Before I rebooted the phone for the last time [prior to the beginning of the above problem] I noticed that my ringtones and related media were all gone and I was unable to download new ones even using third-party apps; the "unable to download sound" error was constantly popping up and when I received messages or phone calls the phone would vibrate but wouldn't play any tones.
* My brother and I spent the better part of 6 hours scouring the net and trying every combination of steps we could think of to try and resolve this. I wouldn't have posted here if I wasn't at the end of my tether and if I hadn't tried every solution I could find from others on various forums including this one, nor would I be so quick to reveal myself to be a deletion-happy moron to a forum of experts (I saw that anti-noob YouTube clip!).
Is there any hope of fixing this issue given my obvious lack of critical faculties?
Thank you for reading this.

You can always install clockworkmod recovery and from there a custom rom. Check the relevant thread, it is pinned.

OK,
don't panic. I almost thought you'd hard bricked your phone when modifying the NAND. This is a soft brick and ALL soft bricks can be recovered, they just take a bit of pain and suffering. Sometimes more suffering than others, but that's irrelevant.
Question, you say you can't restore system apps? How did you try? If a phone is perm rooted, it's rooted. Obviously a temp root is different to a perm root, but I believe this is a perm root as you can REMOVE apps from the system memory. If a root wasn't perm, every app would be sandboxed so no app, including titaniumbackup would work.
* Unlocked and rooted, but remains S-ON (Superuser was installed and worked).
Click to expand...
Click to collapse
S-ON is part of HTC's snap on BL protection. The fact your phone is S-ON is now not that important, the BL is unlocked, thats what matters.
* Used Titanium to delete apps, but made backups and have them on my hard drive for safe keeping but can't access the phone in order to restore them properly.
Click to expand...
Click to collapse
Ok, important advice here (for future ref), you shouldn't go mad with deleting unless you've tried freezing first. Freezing allows you to recover by simply doing a factory reset. Most bootloaders (including HTC's) allow you to perform an emergency factory reset from there. You might lose all the **** on there, but you will have a working phone. You also need to be careful with TitaniumBackup, I'm sure you didn't remove the obvious important ones, but the fact you lost access to your audio means you removed a sound/media package. Next time, google "HTC chacha, safe to remove" as more people root this phone in the next few weeks, safe to remove lists will appear. For SGS (my phone) there is a whole shared google doc with a list of system apps, and the consequence of removing them.
* I was unable to restore backed-up system apps prior to this critical problem emerging, which I think is because my phone isn't "truly" rooted. I can apparently remove from but not add to the protected areas of the phone.
Click to expand...
Click to collapse
You can't restore a system app if there is a conflict. Try and identify the conflict.
* I've tried flashing the device with numerous recovery ROMs and they all fail (wrong image, etc.). I'm having an extremely difficult time finding the original ROM anywhere and more importantly finding one which will work without the phone being connected to the PC at any stage of the flashing job.
Click to expand...
Click to collapse
By the sounds of it, you are using ROMs designed for CWM. If you are going to do that, flash CWM first. There are shed loads of tutorials. If you want to install the stock rom all over again, just download the stock RUU.
* Factory resets and recovery boots don't seem to have any effect.
Click to expand...
Click to collapse
See above about freezing.
* It's a carrier-locked/branded phone, from Three/Hutchison 3G UK. I'm locked into my contract for another year at least.
Click to expand...
Click to collapse
Doesn't matter, you'll fix it, guarantee it.
* Before I rebooted the phone for the last time [prior to the beginning of the above problem] I noticed that my ringtones and related media were all gone and I was unable to download new ones even using third-party apps; the "unable to download sound" error was constantly popping up and when I received messages or phone calls the phone would vibrate but wouldn't play any tones.
Click to expand...
Click to collapse
See what I said above.
* My brother and I spent the better part of 6 hours scouring the net and trying every combination of steps we could think of to try and resolve this. I wouldn't have posted here if I wasn't at the end of my tether and if I hadn't tried every solution I could find from others on various forums including this one, nor would I be so quick to reveal myself to be a deletion-happy moron to a forum of experts (I saw that anti-noob YouTube clip!).
Click to expand...
Click to collapse
Have you tried every combination of steps? You've clearly not tried CWM. I'm not suggesting that as a silver bullet (personally, I try to avoid CWM if I can) but it's the best way to give you low level access to the NAND so you could easily flash an OTA ROM, modded ROM or even return it to stock dead quick.

For a safe to remove list, check the Themes and Apps section.

skezza said:
OK,
don't panic. I almost thought you'd hard bricked your phone when modifying the NAND. This is a soft brick and ALL soft bricks can be recovered, they just take a bit of pain and suffering. Sometimes more suffering than others, but that's irrelevant.
Click to expand...
Click to collapse
Music to my ears!
skezza said:
Question, you say you can't restore system apps? How did you try? If a phone is perm rooted, it's rooted. Obviously a temp root is different to a perm root, but I believe this is a perm root as you can REMOVE apps from the system memory. If a root wasn't perm, every app would be sandboxed so no app, including titaniumbackup would work.
Click to expand...
Click to collapse
In Titanium Backup I tried restoring the backups I made; the "Recovering Backup" notice would just hang indefinitely until I forced TB to close. This only happened with system apps. The backed up files are still on my PC hard drive from when I copied them from my SD card, but I'm not sure they're of any use at this stage.
skezza said:
S-ON is part of HTC's snap on BL protection. The fact your phone is S-ON is now not that important, the BL is unlocked, thats what matters.
Click to expand...
Click to collapse
Ahhh, this is probably my problem then. I ignored most of the fixes and workarounds listed as [S-OFF] because I didn't think they'd work for my device haha.
skezza said:
Ok, important advice here (for future ref), you shouldn't go mad with deleting unless you've tried freezing first. Freezing allows you to recover by simply doing a factory reset. Most bootloaders (including HTC's) allow you to perform an emergency factory reset from there. You might lose all the **** on there, but you will have a working phone. You also need to be careful with TitaniumBackup, I'm sure you didn't remove the obvious important ones, but the fact you lost access to your audio means you removed a sound/media package. Next time, google "HTC chacha, safe to remove" as more people root this phone in the next few weeks, safe to remove lists will appear. For SGS (my phone) there is a whole shared google doc with a list of system apps, and the consequence of removing them.
Click to expand...
Click to collapse
I'm disappointed in myself for being so haphazard in my deleting, I'm usually not that stupid but I think I was a little overexcited to have finally gotten rid of some of the bloatware that'd irritated me for so long haha. I was like "oh boy, I can save even more battery power and internal space if I just remove a little more!". Lesson learnt
skezza said:
By the sounds of it, you are using ROMs designed for CWM. If you are going to do that, flash CWM first. There are shed loads of tutorials. If you want to install the stock rom all over again, just download the stock RUU.
...
Have you tried every combination of steps? You've clearly not tried CWM. I'm not suggesting that as a silver bullet (personally, I try to avoid CWM if I can) but it's the best way to give you low level access to the NAND so you could easily flash an OTA ROM, modded ROM or even return it to stock dead quick.
Click to expand...
Click to collapse
As I said above I didn't realise I could make use of [S-OFF] materials so I didn't even attempt them for fear of making matters worse. I just now attempted to flash CWM and it hung on "parsing" which is what happened with previous flash attempts. If a flash attempt doesn't hang on "parsing" it parses for a second and then goes back to the main menu, apparently having no effect.
I'd be lying if I said I'm not overwhelmed by all of this; the tutorials I've read seem to assume a fair degree of prior knowledge that I definitely don't have haha. I hope I don't stretch anyone's patience here, but if you could explain it to me like a 6-year-old whose mother drank heavily during pregnancy I think it will help move things along!
Thank you for the thorough reply, much appreciated

Follow this to flash CWM, you need to do it with your computer and using fastboot, this is needed for S-ON phones.
http://forum.xda-developers.com/showthread.php?t=1449681

dapaua said:
Follow this to flash CWM, you need to do it with your computer and using fastboot, this is needed for S-ON phones.
http://forum.xda-developers.com/showthread.php?t=1449681
Click to expand...
Click to collapse
Unfortunately I can't do anything via my computer; my phone isn't "discovered" by the command line, unrooting tools or anything else. It does allow me to access the SD card as a hard drive but that's all it does. Obviously this wasn't the case before my problems started, because I used my PC to root and unlock the phone originally, but now the phone's boot process can't reach a point where it becomes receptive to the PC's commands. I don't know why it lets me access the SD card though.
Is there any way to do this without my PC being involved beyond transferring files to the SD card? If not, am I screwed? haha
Thanks mate!

Can you boot into the bootloader (Whith the phone off, press Volume down + power for five seconds)?
Then boot into it, move up with the volume keys and then choose fastboot.
Then follow the procedures in the link I posted previously http://forum.xda-developers.com/showthread.php?t=1449681 (start from step 3). Fastboot mode should be recognized.
The fastboot binary is here C:\Program Files (x86)\Android\android-sdk\tools , if you installed the android SDK, which I asume you did.
Good luck, I hope this works!

dapaua said:
Can you boot into the bootloader (Whith the phone off, press Volume down + power for five seconds)?
Then boot into it, move up with the volume keys and then choose fastboot.
Then follow the procedures in the link I posted previously http://forum.xda-developers.com/showthread.php?t=1449681 (start from step 3). Fastboot mode should be recognized.
Click to expand...
Click to collapse
Dear CHRIST thank you for that - I didn't know about this feature, and it worked! I was able to connect to my PC and do everything I needed to. I used the command line to flash the CWM, then followed instructions for partitioning the SD card and installing a custom ROM. I feel like a real [email protected] I wonder if Anonymous are looking for any new recruits...
dapaua said:
Good luck, I hope this works!
Click to expand...
Click to collapse
It did - I'm back in business!! Thank you mate, if I could fellate you via WiFi I probably would. You'd have to be wearing some anti-virus trousers though, I'm not a slut.
Cheers!

PaddyM said:
Dear CHRIST thank you for that - I didn't...
Click to expand...
Click to collapse
Great news (I thought you already knew about the recovery menu feature otherwise I'd have mentioned it).
As I said in my reply earlier, every soft brick can be fixed somehow. Some are just harder than others. If I'm honest, it seems like yours was pretty straightforward once you got into the Recovery menu.
By the way, if you decide you want to return to stock, you can do that quite easily. Also, if I was you, do the freezing technique I suggested earlier and use the safe list that's available.
If you keep CWM, do a Nandroid backup. You don't have to keep it on your SD, but they are great for doing a very fast recovery. I can usually restore my phone in about 10 - 15 minutes using Nandroid.

PaddyM said:
Dear CHRIST thank you for that - I didn't know about this feature, and it worked! I was able to connect to my PC and do everything I needed to. I used the command line to flash the CWM, then followed instructions for partitioning the SD card and installing a custom ROM. I feel like a real [email protected] I wonder if Anonymous are looking for any new recruits...
It did - I'm back in business!! Thank you mate, if I could fellate you via WiFi I probably would. You'd have to be wearing some anti-virus trousers though, I'm not a slut.
Cheers!
Click to expand...
Click to collapse
I'm happy it worked. Let's hope WiFi technology improves in the future

skezza said:
Great news (I thought you already knew about the recovery menu feature otherwise I'd have mentioned it).
Click to expand...
Click to collapse
I knew about the recovery menu (the stock one, at least) but I didn't realise I could go into the Fastboot option and for the phone to then be recognisable to the PC, thus making it possible to flash via the command line. If I had known that I probably wouldn't have needed to post this thread at all haha.
skezza said:
As I said in my reply earlier, every soft brick can be fixed somehow. Some are just harder than others. If I'm honest, it seems like yours was pretty straightforward once you got into the Recovery menu.
Click to expand...
Click to collapse
Yeah... I think if it happened to one of you guys you probably would have had it sorted in about 6 minutes. 3 days isn't bad for my first attempt though! hahaha
skezza said:
By the way, if you decide you want to return to stock, you can do that quite easily. Also, if I was you, do the freezing technique I suggested earlier and use the safe list that's available.
If you keep CWM, do a Nandroid backup. You don't have to keep it on your SD, but they are great for doing a very fast recovery. I can usually restore my phone in about 10 - 15 minutes using Nandroid.
Click to expand...
Click to collapse
Thanks for the advice man, I'll definitely be looking into the Nandroid backup option, although I hope I've learnt enough from this experience to have no need for it
Thanks to everyone who posted here, I appreciate the patience and the tolerance of my noobery.

Funnily enough, I tried TitaniumBackup today and the original poster is correct. While you can freeze, remove apps etc, you can't return them. especially system. I've not tried any of the alternative install methods that TB uses, but it's quite interesting.

TB is a bit quirky, I think. The system apps won't restore at all, but sometimes apps that I've downloaded myself will restore and other times they won't (the "Restoring App" notice just hangs there indefinitely). I usually find that forcing TB to close and then trying again does the trick, but I can't figure out why it happens in the first place.

Im wondering if anyone else has worked out a good configuration that will allow it to work every time?

[Q] HTC One S(ville) black screen, thats it... just a black screen, what can i do???

I was working fine, enjoying my new HTC One S with CM9 rom installed. Well the battery life wasnt the best on it, and i didnt install the custom kernel. So I looked for the custom kernel download(on my phone, not on my computer) and i found a .zip file. Well I thought that you could just download the kernel straight to my phone and open it up with "Rom Manager" which i did, it than said i needed to reboot the phone in recovery to continue the installation, so I did... it took me to recovery "to continue the installation" well than I looked away, looked backed down and it was black.... and i have tried powering up, booting into boot loader, booting into recover, and nothing... its just BLACK! nothing works, its literally useless ATM. I really messed up, is there anyway to fix this? Thanks in advanced!
----EDIT----
I think I accidentally flashed the kernel like i would normally flash a rom.... cause i downloaded the .zip file(directly to my phone, not using a computer), than i tapped the download and it asked me if i wanted to open it up with rom manager, so i did. and i think rom manager thought i was flashing a rom, when i wasnt, it was a kernel.... am i screwed? or is there anyway out of this?

Do you know the exact kernel you flashed--where did it come from
Some you need to extract and push
Assume you just tried to boot into bootloader thru phone buttons
Does your pc recognize your phone when plugged in, if so can you open a command window and try to access phone as in adb devices then adb reboot bootloader
assuming you are familiar with sdk adb/fastboot comands
otherwise i don't know what else to say--may be bad--sorry

Came from an XDA thread
Here is where it came from: http://forum.xda-developers.com/showthread.php?t=1708676 from "sun90" (half way down the page "CM9 KERNEL remix edition.zip - [Click for QR Code] (5.53 MB, 9 views) ")
i downloaded that straight to my phone and opened it up with Rom Manager, which i think the app took it as a rom, and installed it like a rom even though it was not a rom. I just tried to access it through adb, it comes up with no devices my PC does recognize it when i plug it in though...
Ive tried to get into bootloader tons of times, it just stays black... :'(
Thanks for your answer!

You flashed a galaxy s2 kernel on your one s? why would you ever think that was a smart thing to do?
Looking at the updater script in that zip it seems it wipes some partitions, the partitions on a SGS2 and the ONE S are different, so if that script accidentally wiped say the hboot partition, or some other critical-for-boot partition, you have a fully bricked phone.
For any devs that may know what partitions are what on the One S, the script wiped
mmcblk0p7, and wrote a zimage to mmcblk0p5
---EDIT---
Normally this is a cwm flashable zip on the Samsung Galaxy S II, which is why rom manager flashed it, as it met all the requirements, the only issue is, it was not made for the ONE S and probably overwrote some important things.

I tried for hours and hours to fix the same issue on a friend's One S (same symptoms, not same cause) to no avail. I tried QPST and telnet and a ridiculous amount of things. Had to bring it to the store and get a new one.
Good luck, but I don't believe there's anything you can do to fix it.

Just answered your question in the help thread, Didnt see this thread too !
Im afraid its not looking good, I think your best bet would be to call your provider and blame it on an OTA update.
And hope for the best

Alright, thanks for the help!
Well it looks like i bricked my phone than.... I thought that CM9 was only on the One S, so I just looked for the CM9 kernel, which obviously was for the sg2, i feel like such a dumb ass now! haha well thanks for all the help guys! ill be heading to the t-mobile store today to blame it on a OTA:]

yeah, others wont agree with what your about to do but........
just act like a complete noob, dont mention anything about software / firmware / ROMs / bootloader etc ect
just say your phone made a noise, you selected update and it died lol

good luck--I know it is heartbreaking
not sure of your situation with carrier, but you could go thru Retention if needed

Hi peeps.
i'm very new to all this but sort of know the basics
i'm running on Axiom now but tried to flash cm10 but after install i got a black screen so had to do a restore.
Today i just flashed venom and after the instal process is done, i hear the start up music but nothing on the screen.
I have had 3 other roms on my phone and never had a problem!
these are the steps i do
download rom - place on sd
put phone in recovery
reset factory
reset cache
install from sd
when it finish's reboot
blank screen.
Am i missing something?
Any help would be great and i can't post on the thread because i'm a noob with less than 10 and dont want to spam my way to the 10 :silly:

you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe

rugmankc said:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
Click to expand...
Click to collapse
Thanks but i think that is now the least of my problems!
I used Goomanager and installed CM10, When I did it i installed teamwin recovery. It started to do a lot of strange things, when it finally rebooted i got a load of errors "phone is not working" nearly every 10 seconds?
it will not connect via usb, i discovered the the SD was not mounted.
I tried to mount the SD but it doesnt work, so i rebooted to recovery and tried to mount there but its coming up with - error unable to mount? ive tried everything but no joy
please please help
Thanks:crying:

see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands

rugmankc said:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
Click to expand...
Click to collapse
I've got a mac
not sure what fastboot is.
I'll check out the link, and thank you very much for trying to help:good:
sorry i do know what fastboot is, yes can get in to it. but ive gone from CWM to teamwin recovery if i go in to the recovery section but that wont let me do anything because the mount. cant even load the phone up

I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track

rugmankc said:
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
Click to expand...
Click to collapse
im going to use someone elses alp top with windows. i'll ytry the all in one thing because thats how i rooted it in the first place. thanks for helping it means alot

good luck on it

[Q] OTA Update ViperXL 3.2.7 -> 3.2.8 and Other Noob Questions

I apologize in advance for asking what are, I’m sure, obvious questions, but I’m new at all this (started today actually).
Hardware/software state:
AT&T One X
ViperXL 3.2.7
Rooted, bootloader unlocked via this thread
Running TWRP 2.5.0.0
Flashed the boot.img that came with ViperXL, as per this post
Hboot 1.14
First, my question is how do I get the OTA update to 3.2.8? I went into settings->about and found the update, downloaded it, but when I tried to run it I just end up in TWRP. I’m guessing I need to get back to the stock recovery, is there a way to do that without erasing everything?
Second, should I be concerned with flashing radios, kernels or (I think) hboot? Will flashing any of these items erasing everything? I’m not even sure which radio I’m on, but up until today my phone has been current on AT&T.
Third, what is the "WiFi partions update"? What does this do? Ought I to have it?
I have done hours of searching, but I can’t seem to find a straight forward answer to this. If I’ve missed something and this has already been answered, a link to the post would be great and much appreciated!
Thanks for the help!!

1. The device is supposed to go to TWRP to install the update. No, nothing should be erased.
2. Sounds like you're a little too new to things to be flashing radios, kernels, and possibly even ROMs, but since you're already past that step, just tread carefully until you learn a few more things.
3. Maybe, maybe not. If you're not having any issues, don't bother. If you are have issues, try it out.

Thanks for the quick reply!
Ok, if it is supposed to go to TWRP for the update, what do I do once it’s there? All it appears to do is dump me at the TWRP home screen (options for install, backup, recover, etc..) and then does nothing.
Thanks for the advice; as long as they aren’t really necessary I’ll hold off for now on doing anything further, see if I can’t avoid breaking anything .
Well, I’m not having any WiFi issues, so I’m going to leave it like it is.
Thanks!

First I think you'll need to move the OTA zip file out of /system and onto your sd card. Use a file explorer (which has root access, I use Solid Explorer, there are also others like ES File Explorer, and Root Explorer) and navigate to /system/cache (I'm pretty sure that's where OTAs are stored once downloaded, someone correct me if I'm wrong), cut the file and navigate back to your sd card and paste it somewhere you'll remember.
Now reboot into TWRP.
Once you're in TWRP, select the wipe button, this will take you to the wipe menu. Now wipe cache, and dalvik cache. Now hit the little home button in the bottom left corner of your screen, this will take you back to the home screen.
Now you hit the install button. It will then take you to a screen which shows your sd card. Find the OTA zip file and select it. Then swipe to install. Once it has finished installing you can choose to wipe cache/dalvik again (I always do this to be safe). Then just hit the reboot system button and it should boot up into your newly updated ROM.
One thing though: you really need to do some reading, you haven't got the faintest clue about any of this obviously. You would benefit greatly from reading and actually learning about messing around with your device. Going into these kinds of things ignorantly is very dangerous, you could easily brick your phone. I'm not trying to be mean, just telling you how it is. We all gotta start somewhere, just make sure you take the right steps and get a good understanding of all this
Sent from my One XL using XDA Premium

That was what I was assuming I should do, but I was unsure if it would overwrite anything important that way. It actually seems to download the update to /sdcard/downloads (or it did that the first time I ran it). Good tip about wiping the caches though, I’ll remember that.
Turns out that I actually didn’t need to do all this after all…I deleted the OTA file and tried running it again, and low and behold it decided to work! I swear I didn’t do anything different, but I’d been messing with it for a while after I tried it the first time, maybe I changed something relevant (though I was mostly just tweaking sense to how I wanted it)
I have actually done a great deal of reading and looking around, but I’m still struggling to keep all the various version numbers and terms straight. I really appreciate the advice, and I’ll be doing more research in the future (mainly to discover what the other things that aren’t ROM’s do).
Thanks for the help all!

It wasn't showing up because turge forgot to change something. It should be showing up now.
If not just download it, flash it like normal and reboot.
No need to wipe anything
Sent from my HTC One X using xda premium

Bootloop 2013 Moto G Boost Mobile XT1031 8GB

Hey guys!
To start, I want to say what an amazing place XDA is and how much information and knowledge you can get from here and how awesome the moderators are. I don't think I could ever find another amazing and/or helpful community such as those found here! Thanks to all who have helped me out with my Android issues!
Now to my issue and I apologize ahead of time if there is another thread (or related thread) found in the forum.
As the title states, I have a 2013 Motorola Moto G XT1031 Boost Mobile device. I had upgraded it to Lollipop 5.0.2 or 5.1 when it came out (I can't remember which one it was) and I had then decided to root it. I can say that I believe I was successful in rooting the device because I was able to install Supersu and use RootChecker to verify the install. Everything was going okay until i decided to research and eventually install a custom recovery and attempt to install a custom ROM. Well, let's just say that the recovery install was a bust...
In doing my research for a custom recovery, I found that TWRP had a custom recovery for my phone and apparently for my firmware via TWRP's app on the Play Store. So, I searched for my device in their in-app search for a custom recovery, downloaded it and installed it from the app. Now, my gut told me that this probably wouldn't work and that I should probably be installing a custom recovery via CLI. Nope. I didn't do this. Instead, like I said, I installed a custom recovery from the app itself. That screwed things up for me. I have no idea if it was the install, but my phone began to act incredibly strange. When in the TWRP recovery, my screen had this line that would continuously scroll from top to bottom. It wasn't a completely solid line, but it was transparent, almost like an empty thermometer glass stick was going down the screen. It was weird and not normal. I figured the phone's software was partially broken. It only did this in the TWRP recovery. Nowhere else did this happen. It was slightly annoying.
Later on I decided to install a custom ROM. Again, I did the necessary research to find out if there were any ROMs available for my phone (using XDA of course and others) and found that there were a few out there. So, I downloaded one (wish I could remember which one) and attempted to install it...keyword there. After attempting the install, my phone would not boot. Like at all. Dead. So back to the drawing board I went to try and reverse the damage. Using XDA (ironically) and a plethora of other sites, I tried to resurrect my phone and bring it back to life. After countless hours of trying and trying and trying and more and more research, I just gave up. The phone is dead. Great. $170 spent on a phone to break it a year later.
It's been roughly 4-5 months since I have attempted to redo the process and after another minor attempt, somehow I was able to remove the root completely, including the custom recovery and ROM. I don't know what the heck I did, but it worked....sort of. The phone is now stuck in a bootloop on the logo and sometimes the "bootloader has been unlocked" screen when try and factory reset the phone from the default recovery. When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set and to have this and that. I have this and that installed on my PC, but obviously cannot enable USB-debugging which is needed for ADB and fastboot to recognize my device.
So, my question for anyone who would like to help me out is this: what are my options? Is the phone recoverable? Is there any way I can get ADB/fastboot to see my device and finally install the stock firmware on the phone? I have the proper drivers installed and ADB/fastboot are on my PC. Any help would be amazing, even if you have to tell me to junk it.

blckdragn22 said:
When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set
Click to expand...
Click to collapse
This is incorrect, where did you read that? To reinstall the stock firmware using fastboot, you must be able to boot to the bootloader menu only.

I heard this from a few websites actually, although I could never find a situational fix for my phone. I am trying to restore back to Lollipop without a custom recovery, because within the past hour I found out TWRP was never fully removed when I tried booting into recovery from the AP Fastboot menu when doing to power+vol down option. The TWRP logo shows for about 10 seconds and then the phone tries booting normally, showing the unlocked bootloader warning.
So, yes I can boot into the bootloader menu all day long with no problems. It's just an selection I make doesn't get me anywhere. My question I guess now is: how do I go about reinstalling stock firmware via the bootloader menu. I have Minimal ADB and Fastboot installed on my PC. If I need the full ADB, I can download that. And of course I'd need the firmware, too.

You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795

_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
This thread had the firmware I was looking for thank you. I believe I have the flashing stock firmware process down, I hope. I'l refer to the guide if I need help. Thank you so much!

_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
I am trying to follow the steps listed here http://forum.xda-developers.com/showthread.php?t=2542219&page=35 and for some reason I cannot run any of the commands pertaining to the sparsechunks. This is what I get:
Is there anything you could tell me about that?
Edit: I was able to figure what the issue was when trying to write the sparsechunks. I had to insert a "." after 'sparsechunk' because that is how the file is named in the folder. However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?

blckdragn22 said:
However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
Click to expand...
Click to collapse
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).

_that said:
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
Click to expand...
Click to collapse
I will try that. There was a ...sparsechunks.0 as well apart from sparsechunks.1, sparsechunks.2 and sparsechunks.3. Shall I include that, too?
And adding the screenshot was an amateur mistake. My bad.

@_that this worked like a charm. Phone is 100% working ans usable now. Incredibly helpful. Thank you so much!

(HELP!) Phone Stuck In TWRP

Hello,
the long and short of it is that I tried to root my phone and then install Lineage, but ended up with no OS and now I can't use my phone. I simply want any OS so that I can use my phone. Any help would be greatly appreciated. I am a bit new to this kind of stuff, so I apologize in advance if I don't know some of the technical terms.
I am using a Samsung Galaxy S7 SM-930W8.
A bit more in detail:
I used two videos on youtube. 1 to teach my how to root, which got me into an OS. Then I used a video to teach me how to install Lineage, and that's when it all failed. After this, my phone was stuck in a never-ending loop of a circle going across a line and it never recovered.
I still have access to the TWRP when I hold down Vol-Up, Power and Home but when I try to reboot, it tells me there is no OS installed. I can't even use the recovery option, since I believe I deleted all the previously installed recoveries.
I feel silly for being in this predicament, but I would be so grateful for any help, folks!
-New2S7

New2S7 said:
Hello,
the long and short of it is that I tried to root my phone and then install Lineage, but ended up with no OS and now I can't use my phone. I simply want any OS so that I can use my phone. Any help would be greatly appreciated. I am a bit new to this kind of stuff, so I apologize in advance if I don't know some of the technical terms.
I am using a Samsung Galaxy S7 SM-930W8.
A bit more in detail:
I used two videos on youtube. 1 to teach my how to root, which got me into an OS. Then I used a video to teach me how to install Lineage, and that's when it all failed. After this, my phone was stuck in a never-ending loop of a circle going across a line and it never recovered.
I still have access to the TWRP when I hold down Vol-Up, Power and Home but when I try to reboot, it tells me there is no OS installed. I can't even use the recovery option, since I believe I deleted all the previously installed recoveries.
I feel silly for being in this predicament, but I would be so grateful for any help, folks!
-New2S7
Click to expand...
Click to collapse
Hello, no need to panic, the blue circle over the line was Lineage first boot up, it can take 10-15 mniutes on the first time. If you waited longer than this then maybe there was a problem.
If the Lineage ROM is on your SD card you can try to flash it again and see if it boots this time, sometimes it needs to be flashed twice to work. You must make sure it's the right one for your device.
If it still doesnt work then you will need to flash the stock firmware back to your device with ODIN. This is the firmware for your device >>>>HERE<<< Pick your network provider or an "unknown" version which is unbranded stock firmware. The download is a little slow but it's free.
There's lots of guides how to flash firmware with Odin, it's very easy.
I forgot to mention TWRP is a much better Recovery Option so yes when you instal TWRP the stock recovery won't boot.

cooltt said:
Hello, no need to panic, the blue circle over the line was Lineage first boot up, it can take 10-15 mniutes on the first time. If you waited longer than this then maybe there was a problem.
If the Lineage ROM is on your SD card you can try to flash it again and see if it boots this time, sometimes it needs to be flashed twice to work. You must make sure it's the right one for your device.
If it still doesnt work then you will need to flash the stock firmware back to your device with ODIN. This is the firmware for your device. Pick your network provider or an "unknown" version which is unbranded stock firmware. The download is a little slow but it's free.
There's lots of guides how to flash firmware with Odin, it's very easy.
I forgot to mention TWRP is a much better Recovery Option so yes when you instal TWRP the stock recovery won't boot.
Click to expand...
Click to collapse
Hello cooltt,
I was able to fix my problem an hour or so ago, but thank you for your calming post anyway.
For future threads, here is what I did:
1. I downloaded a stock OS and then extracted all the md5 files. (There is an md5 file for the "BL", "AP", "CP" and "CSC" fields in Odin.)
2. I then used Odin and after it detected my device, I plugged the 4 files in the appropriate fields.
3. I then hit start and it restored my phone back to a functional state.
Though I spent the last 20ish hours in a panic, I actually managed to achieve the goals that prompted me to try and install a custom rom: fewer stock apps and no Samsun Account bothering me all the time.
Thank you all for your concern.
-New2S7
(P.S. I do not know how to mark this as solved. If an admin comes across this, please mark this as solved!)