I unlocked the bootloader, rooted 4.4.4, installed team win recovery. Flashed Alberto97's latest ASOP ROM 5.1.
I can't figure out how to reroot the phone chainfires supersu doesn't work.
When the phone boots it still has Motorola's nasty white screen and message.
When the phone boots for the first 5 or so minutes you can see a single scan line going up the screen. Doesn't really matter just didn't know of there was a fix.
Forgot to add it's an 8gig bought from Boost Mobile.
Thanks in advance.
Got it rooted.
How do I fix the other two issues?
Related
Hi, today I got the notification on my G (India-Dual Sim version) that the 4.4.4 was available to download.
I tried to go back to stock recovery to do the upgrade but for some reason it didn´t work, I was able to flash but the stock recovery never came up. In the end I decided to give a shot and see what happened.
I have the CWM recovery, and it notified me that the file used for the update had not a correct signature, decided to continue, no problems so far. In the end it notified me that maybe root may have some issues (the same warning when you root the phone the first time), told it to fix it and it rebooted.
All smooth and so far no problems, but it did show a warning on the main screen (after being all loaded) that something went wrong, but the phone booted OK and the system version is 4.4.4, maybe something to do with the stock recovery or something, don´t know, but so far, is you have CWM, I believe you can do the OTA update withouth problem.
Will let you know if something comes up.
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
tomisalunatic said:
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Click to expand...
Click to collapse
Try putting twrp back on and flashing stock Lollipop Rom. http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 You can also try aosp, cm12.1 or any other lollipop ROM.
The Lollipop OTA is very picky, I believe any modifications to the stock firmware will cause the update to fail. You will need to have a completely stock system for the OTA to install successfully. Find the correct KitKat firmware for your phone and flash it then try upgrading.
Hi.
I'm having a similar problem with te OTA being picky (topic here).
Is there a stock firmware "file map" so that we can check manually what is wrong and erase/add needed files ?
Maybe this could be done by checking a flashable stock rom ?
Thanks a lot guys.
EDIT : Found a solution here http://forum.xda-developers.com/mot...osing-apps-t2979971/post57658072#post57658072.
Worked perfectly !
OP, I am in the same situation. I did the same as you, and got the same results. Have you managed to solve it? It would be nice if you tell what you decide to do and what's the outcome. Thanks!
tomisalunatic said:
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Click to expand...
Click to collapse
Update to 5.1 success..... erm, well it's all relative
Eventually managed to update my XT1039 to 5.1 via ota.
Started with a fully charged phone and flashed 4.4.4 stock firmware (http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619).
Once completed, powered up phone and signed into google play then updated the motorola update services app.
DO NOT install a custom recovery or root yet or the update will fail!
Start the update by going into settings/about phone/system updates.
After first boot into 5.1, do a factory reset.
To root once the upgrade is completed, download cf autoroot (http://forum.xda-developers.com/moto-g/4g-development/root-xt1039-cf-auto-root-peregrine-t2942406) and unzip to a folder on your pc. Open a command prompt and change directory to this folder. Powerup handset in bootloader mode (hold vol down while switching on), connect USB and run 'root-windows.bat' from the command prompt.
So far I'm hugely disappointed in the update as I use WiFi tethering alot and it appears to be a massive fail. I know it wasn't 100% in 4.4.4 or CM12 5.1 with both reqiuring an occasional reboot, but in 5.1, something's just not right and it's basically unusable (could it be updated radio or something?). Fortunately, USB tethering appears flawless.
Another obsrvation seems to be abscence of a + appearing in the HSPA signal indicator, I seem to be getting just the H appearing regardless.
Also no more bluetooth visibilty timeout setting.
After installing CWM 6.0.5.0, I got gliches with the display in recovery mode but it works.
Now after I have it rooted, ad free and de-bloated, fixed the power on logo and installed CWM 6.0.5.0, I'll stick with it for a while to just to see how the battery lasts.
In hindsight I should've stuck with CM12 5.1.
It's been a long night and I'm at a complete loss as to what to look for next...
Around 9PM last night, my phone randomly rebooted... it's done this a few times before, and i thought nothing of it. When it finally booted back up, I was at the "choose your language" setup screen. WTF.
I lost literally EVERYTHING.
FYI, this was on stock rom, and I didn't even have the OTA(s) because I was rooted and was content with 4.4.2
Well, since all my data was gone, I figured it was about time to see what I could get with a custom ROM. The phone's been sluggish lately, so I figured a bloat-less upgrade would help.
Long story short, I loaded the 5.1 firmwares for VZW, and the HBOOT as well, and flashed GPE_5.1 on it. It took it like a champ, but refused to boot. I tried changing the kernels during the GPE install, but none of them worked. Some would loop, some would kick me into recovery, and one would just stall and the animation would run forever. No worries, I'm sure I can go to a stock 5.x rom! But that's a big NOPE. I just get "installation aborted" with no reasoning or errors in CWM (I had TWRP at one point as well, and it didn't get me anywhere either) Or I get "symlink: some symlinks failed" ... it depends what rom i'm flashing.
I've tried stock and custom, rooted and not... literally nothing will take.
ALSO, in my attempts to remedy the problem, I tried to reflash the firmware, but fastboot starts that there's not enough space. A quick google search pointed to "not enough ram in the PC" which is BS because it's done it on 2 different systems, both with 16GB ram, one running Win8.1 and the other Win7.
To top it all off, somehow I relocked the phone (but i still have S-OFF) and without being able to boot into the OS, I can't unlock it with SunShine/Firewater.
Hopefully, someone can point me in the right direction...
Welp... It's working now...
Not 100% sure what I ended up doing that worked, but I was able to run the unlocker via creating a new unlock_code.bin from htcdev and ran that with the all in one toolkit.
From there, I was able to use the toolkit to flash a stock ruu rom (I flashed the 5.0.1 RUU, but when it booted, I was still in 4.4.2)
It apparently didn't like somwething in the boot order other than the ROM itself.
I'm now running S-OFF, relocked but rooted 5.0.1 after it took several OTAs. Not sure how many more OTA's are pending, but it just keeps prompting me lol...
At this point, I'm just happy it's booting, stock or not. I don't even know what recovery I'm running at this point...
Did you update your recovery??? To the latest one
Sent from my HTC6525LVW using XDA Premium 4 mobile app
I got this s6 back in march or april and it was on 5.0.2 and well now that iv've updated to the OTAS 5.1.1 OFE i was curious about root and i continued with a thread about rooting it and etc
( i kinda regret that now, i shouldve stayed on 5.0.2)
but the main reason i rooted was to recover files and welli did but i installed dr fone on my computer it asked for my phones root permissions so i went ahead and rooted it but after a bit i noticed it started to freeze my phone and after a bit it just stopped working.
i turn it on and restart it i see a blue led cycling and i see the sprint spark screen but it does nothing from there.
and so i stupidly went to to stock recovery, wiped cache, and factory resetting it and now idk what to do
there isnt an OFE stock tar yet so i cant fix this on my own, im just thinking if i flash twrp right now and then flash a custom rom will that work?? for my OFE build
am i able to or should i just download the stock tar 5.0.2 to reflash it or will that just basically brick me completely??
also i did have insurance for this and i thnink i just blew that one too :/
ive noticed mine said this
G920PVPU2BOFE
and not G920PVPU2BOF7
so does that mean im able to use the stock firmware from the website and reflash it or like what do i do...
SO what i did countless of researching
i ended up having the
custom binary blocked by FRP lock, by forgetting to unlock oem before updating the Twisted Projects SuperSu or User since it asked me to updated i ovbiously just went ahead of myself and that happened thus into this Boot Loop Soft
and im flashing with ODIN the stock 5.1.1 OF7 tar its surprisingly working. ( i was originally on the OFE OTA tho.)
unlike the Twisted Project custom roms, kernel and or twrp setup, i couldnt boot into the twrp or even past the android screen, and well the only option i had was just Download Mode.
And this basically saved me.
Very Informative
Besides my comments in the title, the only thing my K1 can do right now is go into the bootloader and nothing else.
The Story:
I was running Blisspop 4.0.3 (Lollipop 5.1.1) then flashed to Blisspop 6.0 (MM 6.0). After that, it wouldn't boot into the OS. I did a complete wipe of everything and tried to flash Blisspop 6.0 again, same outcome. I heard I needed to get my hands on TWRP 3.0.0.0 to get MM roms up and running. My dumb ass flashed it and now, I don't have a recovery either now because it gets stuck on the first slpash screen. I went digging around the forums here and I felt like I read something about doing a bootloader update. If that's true well then I done messed up now. At this moment in time, I am only able to launch the bootloader but for the life of me, I can't get ADB to detect it connected to my computer to fix these issues. So as of right now, it's a $200 brick. If anyone can point me to some awesome tools to hack my way around this conundrum, I'd love you forever. Thanks in advance for listening to my problems.