Hello
I have lg g2 d800
I used to open service menu buy typing 3845#*800#
I installed cm12 and this code is no longer working
Is there any way to open the service menu
Its more commonly referred to around as "Hidden Menu"
Anyway, Search XDA for the Hidden Menu apk and try to install it...
Related
Hi guys,i have a lg optimus p500 that freeze on LG icon when i boot.I try the KDZ to flash manually and fix the problem but something goes wrong at the end.The steps i follow are ,
1)Download & install LG usb drivers
2)Unistall all the other mobile phones drivers (nokia etc)
3)Unable the modem lg driver from device manager
4)Downolad and install KDZ FW UPD (msxml.msi file)
5)Put the phone on emergency mode and connct to my pc
6)Pc see the phone and install 3 drivers
7)Open KDZ and run the rom file whick i have download for my country edition v20.kdz
8)Everything work ok at the start.kdz runs the files (the files 1-100) but after the phone turn by itself to boot load stops to a 0 something file and i get an errow.
I try the compatible mode for the KDZ but i get the same errow all the time can someone help me with that????
wrong forum. this should be posted here:
http://forum.xda-developers.com/forumdisplay.php?f=837
but heres a link for your problem:
http://forum.xda-developers.com/showthread.php?t=883314
I think you got a bad version.
http ://csmg.lgmobile.com:9002/csmg/b2c/client/tool_mode_country_check.jsp?model=LGP500&country=LT
(put you country code, where are letter LT)
You will get you language codes, (something like that: ABALGC BAL/BALTICS)
Then search for your version:
http ://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ABALSV/V20c_00/V20C_00.kdz
Where you have to change "WEBSW" to your language code and "V20c_00/V20C_00" to letters maybe "V20d_00/V20D_00" and try a lot of letters. That I did and found what I needed. Remember, letters are case sensitive.
Samsung Mesmerize Cdma How to's
download your drivers for the mesmerize found on samsungs website
download a cdma flashing software like cdma ws or dfs.
download the prl of your choice carrier or who you would like to roam off of(read and know roaming limits of your carrier before writing to phone which can result in termination of your service)
Getting your spc code and loading a prl.
1.connect phone to computer in diag mode do this by dialing ##8778# on the phone change them both to usb if not there already.
2. open the flashing software of choice for this guide I will use dfs.
3. click ports at the upper right of the main interface of dfs and double click the port with diagnostic in it and exit the add port tab.
4. you should see yellow on the screen on the equipment tab
5.in the box with all those f's delete them and put this 2010031619780721 in that box and click pwd and it should say device unlocked in blue.
6.next go to the programming tab sub-tab general and press read next to spc under unlock you now have your spc copy that to the box with all 0's next to the pwd where the f's was then press spc to the left of your pasted spc.
7.go to nam tab to the left you will see prl click load choose the prl file you downloaded then press write.
8. reboot your phone and your prl has been changed be sure to make a backup of your original prl just in case you need it.
Many custom roms for LG L9 p760 do not have wifi tethering working. It apparently activates but then I'm unable to navigate from the PC.
Do you know of settings to fix that? Any configuration file or patch?
After I updated my phone (lg g2 T-Mobile) I can't connect with android file transfer app on my Mac and the lg software option is missing. Can someone help with this.
i have use mobile uncle tools but mobile mobile uncle tools dose’t open engineer mode. when i have press engineer mode two option will show First is Engineer mode (Android) and second is Engineer mode (MTK).
first option show only phone info. and sencond option not open it and back to home screen Mobile uncle tool.
actually my moblie show only one network at a time. and error msg. will show is “sim card removed pls. restart your mobile”. then i have restart my moblie and after restart show both of network, but second network can not work properly and automatic gone.
i am also use these code “*#*#4636#*#* but this code will show only phone information and radio on and off option. my phone one sim port properly work but second is not, and network is comes and goes many times but network providers name are so show when both network will comes on so i have try mtk droid tools but mtk droid tools dose not show root option in facing down. so what can i do now….. other things is my volume + button is dose not work when i am install custom rom “cm13”. pls. some help
and sorry for my poor english.
riteshRN said:
i have use mobile uncle tools but mobile mobile uncle tools dose’t open engineer mode. when i have press engineer mode two option will show First is Engineer mode (Android) and second is Engineer mode (MTK).
first option show only phone info. and sencond option not open it and back to home screen Mobile uncle tool.
actually my moblie show only one network at a time. and error msg. will show is “sim card removed pls. restart your mobile”. then i have restart my moblie and after restart show both of network, but second network can not work properly and automatic gone.
i am also use these code “*#*#4636#*#* but this code will show only phone information and radio on and off option. my phone one sim port properly work but second is not, and network is comes and goes many times but network providers name are so show when both network will comes on so i have try mtk droid tools but mtk droid tools dose not show root option in facing down. so what can i do now….. other things is my volume + button is dose not work when i am install custom rom “cm13”. pls. some help
and sorry for my poor english.
Click to expand...
Click to collapse
Sorry, no discussion of IMEI at XDA other than backing up your IMEI or restoring the backed up IMEI. No discussion of changing/altering/replacing IMEI is allowed.
Sent from my SCH-I535 using Tapatalk